[ Upstream commit 9986fb5164c8b21f6439cfd45ba36d8cc80c9710 ]
Patch series "powerpc/crash: use generic crashkernel reservation", v3.
Commit 0ab97169aa05 ("crash_core: add generic function to do reservation")
added a generic function to reserve crashkernel memory. So let's use the
same function on powerpc and remove the architecture-specific code that
essentially does the same thing.
The generic crashkernel reservation also provides a way to split the
crashkernel reservation into high and low memory reservations, which can
be enabled for powerpc in the future.
Additionally move powerpc to use generic APIs to locate memory hole for
kexec segments while loading kdump kernel.
This patch (of 7):
kexec_elf_load() loads an ELF executable and sets the address of the
lowest PT_LOAD section to the address held by the lowest_load_addr
function argument.
To determine the lowest PT_LOAD address, a local variable lowest_addr
(type unsigned long) is initialized to UINT_MAX. After loading each
PT_LOAD, its address is compared to lowest_addr. If a loaded PT_LOAD
address is lower, lowest_addr is updated. However, setting lowest_addr to
UINT_MAX won't work when the kernel image is loaded above 4G, as the
returned lowest PT_LOAD address would be invalid. This is resolved by
initializing lowest_addr to ULONG_MAX instead.
This issue was discovered while implementing crashkernel high/low
reservation on the PowerPC architecture.
Link: https://lkml.kernel.org/r/20250131113830.925179-1-sourabhjain@linux.ibm.com
Link: https://lkml.kernel.org/r/20250131113830.925179-2-sourabhjain@linux.ibm.com
Fixes: a0458284f0 ("powerpc: Add support code for kexec_file_load()")
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4a8b5bba712a711d8ca1f7d04646db63f9c88f5 ]
bpf_send_signal_common() uses preemptible() to check whether or not the
current context is preemptible. If it is preemptible, it will use
irq_work to send the signal asynchronously instead of trying to hold a
spin-lock, because spin-lock is sleepable under PREEMPT_RT.
However, preemptible() depends on CONFIG_PREEMPT_COUNT. When
CONFIG_PREEMPT_COUNT is turned off (e.g., CONFIG_PREEMPT_VOLUNTARY=y),
!preemptible() will be evaluated as 1 and bpf_send_signal_common() will
use irq_work unconditionally.
Fix it by unfolding "!preemptible()" and using "preempt_count() != 0 ||
irqs_disabled()" instead.
Fixes: 87c544108b61 ("bpf: Send signals asynchronously if !preemptible")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20250220042259.1583319-1-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f13abc1e8e1a3b7455511c4e122750127f6bc9b0 ]
Currently, watch_queue_set_size() modifies the pipe buffers charged to
user->pipe_bufs without updating the pipe->nr_accounted on the pipe
itself, due to the if (!pipe_has_watch_queue()) test in
pipe_resize_ring(). This means that when the pipe is ultimately freed,
we decrement user->pipe_bufs by something other than what than we had
charged to it, potentially leading to an underflow. This in turn can
cause subsequent too_many_pipe_buffers_soft() tests to fail with -EPERM.
To remedy this, explicitly account for the pipe usage in
watch_queue_set_size() to match the number set via account_pipe_buffers()
(It's unclear why watch_queue_set_size() does not update nr_accounted;
it may be due to intentional overprovisioning in watch_queue_set_size()?)
Fixes: e95aada4cb93d ("pipe: wakeup wr_wait after setting max_usage")
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Link: https://lore.kernel.org/r/206682a8-0604-49e5-8224-fdbe0c12b460@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27af31e44949fa85550176520ef7086a0d00fd7b ]
When is_migration_base() is unused, it prevents kernel builds
with clang, `make W=1` and CONFIG_WERROR=y:
kernel/time/hrtimer.c:156:20: error: unused function 'is_migration_base' [-Werror,-Wunused-function]
156 | static inline bool is_migration_base(struct hrtimer_clock_base *base)
| ^~~~~~~~~~~~~~~~~
Fix this by marking it with __always_inline.
[ tglx: Use __always_inline instead of __maybe_unused and move it into the
usage sites conditional ]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250116160745.243358-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ed4fb6d7ef68111bb539283561953e5c6e9a6e38 upstream.
The timerslack_ns setting is used to specify how much the hardware
timers should be delayed, to potentially dispatch multiple timers in a
single interrupt. This is a performance optimization. Timers of
realtime tasks (having a realtime scheduling policy) should not be
delayed.
This logic was inconsitently applied to the hrtimers, leading to delays
of realtime tasks which used timed waits for events (e.g. condition
variables). Due to the downstream override of the slack for rt tasks,
the procfs reported incorrect (non-zero) timerslack_ns values.
This is changed by setting the timer_slack_ns task attribute to 0 for
all tasks with a rt policy. By that, downstream users do not need to
specially handle rt tasks (w.r.t. the slack), and the procfs entry
shows the correct value of "0". Setting non-zero slack values (either
via procfs or PR_SET_TIMERSLACK) on tasks with a rt policy is ignored,
as stated in "man 2 PR_SET_TIMERSLACK":
Timer slack is not applied to threads that are scheduled under a
real-time scheduling policy (see sched_setscheduler(2)).
The special handling of timerslack on rt tasks in downstream users
is removed as well.
Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240814121032.368444-2-felix.moessbauer@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b583ef82b671c9a752fbe3e95bd4c1c51eab764d upstream.
Max Makarov reported kernel panic [1] in perf user callchain code.
The reason for that is the race between uprobe_free_utask and bpf
profiler code doing the perf user stack unwind and is triggered
within uprobe_free_utask function:
- after current->utask is freed and
- before current->utask is set to NULL
general protection fault, probably for non-canonical address 0x9e759c37ee555c76: 0000 [#1] SMP PTI
RIP: 0010:is_uprobe_at_func_entry+0x28/0x80
...
? die_addr+0x36/0x90
? exc_general_protection+0x217/0x420
? asm_exc_general_protection+0x26/0x30
? is_uprobe_at_func_entry+0x28/0x80
perf_callchain_user+0x20a/0x360
get_perf_callchain+0x147/0x1d0
bpf_get_stackid+0x60/0x90
bpf_prog_9aac297fb833e2f5_do_perf_event+0x434/0x53b
? __smp_call_single_queue+0xad/0x120
bpf_overflow_handler+0x75/0x110
...
asm_sysvec_apic_timer_interrupt+0x1a/0x20
RIP: 0010:__kmem_cache_free+0x1cb/0x350
...
? uprobe_free_utask+0x62/0x80
? acct_collect+0x4c/0x220
uprobe_free_utask+0x62/0x80
mm_release+0x12/0xb0
do_exit+0x26b/0xaa0
__x64_sys_exit+0x1b/0x20
do_syscall_64+0x5a/0x80
It can be easily reproduced by running following commands in
separate terminals:
# while :; do bpftrace -e 'uprobe:/bin/ls:_start { printf("hit\n"); }' -c ls; done
# bpftrace -e 'profile:hz:100000 { @[ustack()] = count(); }'
Fixing this by making sure current->utask pointer is set to NULL
before we start to release the utask object.
[1] https://github.com/grafana/pyroscope/issues/3673
Fixes: cfa7f3d2c526 ("perf,x86: avoid missing caller address in stack traces captured in uprobe")
Reported-by: Max Makarov <maxpain@linux.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20250109141440.2692173-1-jolsa@kernel.org
[Christian Simon: Rebased for 6.12.y, due to mainline change https://lore.kernel.org/all/20240929144239.GA9475@redhat.com/]
Signed-off-by: Christian Simon <simon@swine.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3b4035ddbfc8e4521f85569998a7569668cccf51 ]
child_cfs_rq_on_list attempts to convert a 'prev' pointer to a cfs_rq.
This 'prev' pointer can originate from struct rq's leaf_cfs_rq_list,
making the conversion invalid and potentially leading to memory
corruption. Depending on the relative positions of leaf_cfs_rq_list and
the task group (tg) pointer within the struct, this can cause a memory
fault or access garbage data.
The issue arises in list_add_leaf_cfs_rq, where both
cfs_rq->leaf_cfs_rq_list and rq->leaf_cfs_rq_list are added to the same
leaf list. Also, rq->tmp_alone_branch can be set to rq->leaf_cfs_rq_list.
This adds a check `if (prev == &rq->leaf_cfs_rq_list)` after the main
conditional in child_cfs_rq_on_list. This ensures that the container_of
operation will convert a correct cfs_rq struct.
This check is sufficient because only cfs_rqs on the same CPU are added
to the list, so verifying the 'prev' pointer against the current rq's list
head is enough.
Fixes a potential memory corruption issue that due to current struct
layout might not be manifesting as a crash but could lead to unpredictable
behavior when the layout changes.
Fixes: fdaba61ef8 ("sched/fair: Ensure that the CFS parent is added after unthrottling")
Signed-off-by: Zecheng Li <zecheng@google.com>
Reviewed-and-tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20250304214031.2882646-1-zecheng@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 82c387ef7568c0d96a918a5a78d9cad6256cfa15 upstream.
David reported a warning observed while loop testing kexec jump:
Interrupts enabled after irqrouter_resume+0x0/0x50
WARNING: CPU: 0 PID: 560 at drivers/base/syscore.c:103 syscore_resume+0x18a/0x220
kernel_kexec+0xf6/0x180
__do_sys_reboot+0x206/0x250
do_syscall_64+0x95/0x180
The corresponding interrupt flag trace:
hardirqs last enabled at (15573): [<ffffffffa8281b8e>] __up_console_sem+0x7e/0x90
hardirqs last disabled at (15580): [<ffffffffa8281b73>] __up_console_sem+0x63/0x90
That means __up_console_sem() was invoked with interrupts enabled. Further
instrumentation revealed that in the interrupt disabled section of kexec
jump one of the syscore_suspend() callbacks woke up a task, which set the
NEED_RESCHED flag. A later callback in the resume path invoked
cond_resched() which in turn led to the invocation of the scheduler:
__cond_resched+0x21/0x60
down_timeout+0x18/0x60
acpi_os_wait_semaphore+0x4c/0x80
acpi_ut_acquire_mutex+0x3d/0x100
acpi_ns_get_node+0x27/0x60
acpi_ns_evaluate+0x1cb/0x2d0
acpi_rs_set_srs_method_data+0x156/0x190
acpi_pci_link_set+0x11c/0x290
irqrouter_resume+0x54/0x60
syscore_resume+0x6a/0x200
kernel_kexec+0x145/0x1c0
__do_sys_reboot+0xeb/0x240
do_syscall_64+0x95/0x180
This is a long standing problem, which probably got more visible with
the recent printk changes. Something does a task wakeup and the
scheduler sets the NEED_RESCHED flag. cond_resched() sees it set and
invokes schedule() from a completely bogus context. The scheduler
enables interrupts after context switching, which causes the above
warning at the end.
Quite some of the code paths in syscore_suspend()/resume() can result in
triggering a wakeup with the exactly same consequences. They might not
have done so yet, but as they share a lot of code with normal operations
it's just a question of time.
The problem only affects the PREEMPT_NONE and PREEMPT_VOLUNTARY scheduling
models. Full preemption is not affected as cond_resched() is disabled and
the preemption check preemptible() takes the interrupt disabled flag into
account.
Cure the problem by adding a corresponding check into cond_resched().
Reported-by: David Woodhouse <dwmw@amazon.co.uk>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: David Woodhouse <dwmw@amazon.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/all/7717fe2ac0ce5f0a2c43fdab8b11f4483d54a2a4.camel@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6f86bdeab633a56d5c6dccf1a2c5989b6a5e323e upstream.
The following commands causes a crash:
~# cd /sys/kernel/tracing/events/rcu/rcu_callback
~# echo 'hist:name=bad:keys=common_pid:onmax(bogus).save(common_pid)' > trigger
bash: echo: write error: Invalid argument
~# echo 'hist:name=bad:keys=common_pid' > trigger
Because the following occurs:
event_trigger_write() {
trigger_process_regex() {
event_hist_trigger_parse() {
data = event_trigger_alloc(..);
event_trigger_register(.., data) {
cmd_ops->reg(.., data, ..) [hist_register_trigger()] {
data->ops->init() [event_hist_trigger_init()] {
save_named_trigger(name, data) {
list_add(&data->named_list, &named_triggers);
}
}
}
}
ret = create_actions(); (return -EINVAL)
if (ret)
goto out_unreg;
[..]
ret = hist_trigger_enable(data, ...) {
list_add_tail_rcu(&data->list, &file->triggers); <<<---- SKIPPED!!! (this is important!)
[..]
out_unreg:
event_hist_unregister(.., data) {
cmd_ops->unreg(.., data, ..) [hist_unregister_trigger()] {
list_for_each_entry(iter, &file->triggers, list) {
if (!hist_trigger_match(data, iter, named_data, false)) <- never matches
continue;
[..]
test = iter;
}
if (test && test->ops->free) <<<-- test is NULL
test->ops->free(test) [event_hist_trigger_free()] {
[..]
if (data->name)
del_named_trigger(data) {
list_del(&data->named_list); <<<<-- NEVER gets removed!
}
}
}
}
[..]
kfree(data); <<<-- frees item but it is still on list
The next time a hist with name is registered, it causes an u-a-f bug and
the kernel can crash.
Move the code around such that if event_trigger_register() succeeds, the
next thing called is hist_trigger_enable() which adds it to the list.
A bunch of actions is called if get_named_trigger_data() returns false.
But that doesn't need to be called after event_trigger_register(), so it
can be moved up, allowing event_trigger_register() to be called just
before hist_trigger_enable() keeping them together and allowing the
file->triggers to be properly populated.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250227163944.1c37f85f@gandalf.local.home
Fixes: 067fe038e7 ("tracing: Add variable reference handling to hist triggers")
Reported-by: Tomas Glozar <tglozar@redhat.com>
Tested-by: Tomas Glozar <tglozar@redhat.com>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Closes: https://lore.kernel.org/all/CAP4=nvTsxjckSBTz=Oe_UYh8keD9_sZC4i++4h72mJLic4_W4A@mail.gmail.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bddf10d26e6e5114e7415a0e442ec6f51a559468 ]
We triggered the following crash in syzkaller tests:
BUG: Bad page state in process syz.7.38 pfn:1eff3
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1eff3
flags: 0x3fffff00004004(referenced|reserved|node=0|zone=1|lastcpupid=0x1fffff)
raw: 003fffff00004004 ffffe6c6c07bfcc8 ffffe6c6c07bfcc8 0000000000000000
raw: 0000000000000000 0000000000000000 00000000fffffffe 0000000000000000
page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x32/0x50
bad_page+0x69/0xf0
free_unref_page_prepare+0x401/0x500
free_unref_page+0x6d/0x1b0
uprobe_write_opcode+0x460/0x8e0
install_breakpoint.part.0+0x51/0x80
register_for_each_vma+0x1d9/0x2b0
__uprobe_register+0x245/0x300
bpf_uprobe_multi_link_attach+0x29b/0x4f0
link_create+0x1e2/0x280
__sys_bpf+0x75f/0xac0
__x64_sys_bpf+0x1a/0x30
do_syscall_64+0x56/0x100
entry_SYSCALL_64_after_hwframe+0x78/0xe2
BUG: Bad rss-counter state mm:00000000452453e0 type:MM_FILEPAGES val:-1
The following syzkaller test case can be used to reproduce:
r2 = creat(&(0x7f0000000000)='./file0\x00', 0x8)
write$nbd(r2, &(0x7f0000000580)=ANY=[], 0x10)
r4 = openat(0xffffffffffffff9c, &(0x7f0000000040)='./file0\x00', 0x42, 0x0)
mmap$IORING_OFF_SQ_RING(&(0x7f0000ffd000/0x3000)=nil, 0x3000, 0x0, 0x12, r4, 0x0)
r5 = userfaultfd(0x80801)
ioctl$UFFDIO_API(r5, 0xc018aa3f, &(0x7f0000000040)={0xaa, 0x20})
r6 = userfaultfd(0x80801)
ioctl$UFFDIO_API(r6, 0xc018aa3f, &(0x7f0000000140))
ioctl$UFFDIO_REGISTER(r6, 0xc020aa00, &(0x7f0000000100)={{&(0x7f0000ffc000/0x4000)=nil, 0x4000}, 0x2})
ioctl$UFFDIO_ZEROPAGE(r5, 0xc020aa04, &(0x7f0000000000)={{&(0x7f0000ffd000/0x1000)=nil, 0x1000}})
r7 = bpf$PROG_LOAD(0x5, &(0x7f0000000140)={0x2, 0x3, &(0x7f0000000200)=ANY=[@ANYBLOB="1800000000120000000000000000000095"], &(0x7f0000000000)='GPL\x00', 0x7, 0x0, 0x0, 0x0, 0x0, '\x00', 0x0, @fallback=0x30, 0xffffffffffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x10, 0x0, @void, @value}, 0x94)
bpf$BPF_LINK_CREATE_XDP(0x1c, &(0x7f0000000040)={r7, 0x0, 0x30, 0x1e, @val=@uprobe_multi={&(0x7f0000000080)='./file0\x00', &(0x7f0000000100)=[0x2], 0x0, 0x0, 0x1}}, 0x40)
The cause is that zero pfn is set to the PTE without increasing the RSS
count in mfill_atomic_pte_zeropage() and the refcount of zero folio does
not increase accordingly. Then, the operation on the same pfn is performed
in uprobe_write_opcode()->__replace_page() to unconditional decrease the
RSS count and old_folio's refcount.
Therefore, two bugs are introduced:
1. The RSS count is incorrect, when process exit, the check_mm() report
error "Bad rss-count".
2. The reserved folio (zero folio) is freed when folio->refcount is zero,
then free_pages_prepare->free_page_is_bad() report error
"Bad page state".
There is more, the following warning could also theoretically be triggered:
__replace_page()
-> ...
-> folio_remove_rmap_pte()
-> VM_WARN_ON_FOLIO(is_zero_folio(folio), folio)
Considering that uprobe hit on the zero folio is a very rare case, just
reject zero old folio immediately after get_user_page_vma_remote().
[ mingo: Cleaned up the changelog ]
Fixes: 7396fa818d ("uprobes/core: Make background page replacement logic account for rss_stat counters")
Fixes: 2b14449835 ("uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints")
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20250224031149.1598949-1-tongtiangen@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 57b76bedc5c52c66968183b5ef57234894c25ce7 upstream.
The function tracer should record the preemption level at the point when
the function is invoked. If the tracing subsystem decrement the
preemption counter it needs to correct this before feeding the data into
the trace buffer. This was broken in the commit cited below while
shifting the preempt-disabled section.
Use tracing_gen_ctx_dec() which properly subtracts one from the
preemption counter on a preemptible kernel.
Cc: stable@vger.kernel.org
Cc: Wander Lairson Costa <wander@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/20250220140749.pfw8qoNZ@linutronix.de
Fixes: ce5e48036c ("ftrace: disable preemption when recursion locked")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Wander Lairson Costa <wander@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 56d5f3eba3f5de0efdd556de4ef381e109b973a9 upstream.
In [1] it was reported that the acct(2) system call can be used to
trigger NULL deref in cases where it is set to write to a file that
triggers an internal lookup. This can e.g., happen when pointing acc(2)
to /sys/power/resume. At the point the where the write to this file
happens the calling task has already exited and called exit_fs(). A
lookup will thus trigger a NULL-deref when accessing current->fs.
Reorganize the code so that the the final write happens from the
workqueue but with the caller's credentials. This preserves the
(strange) permission model and has almost no regression risk.
This api should stop to exist though.
Link: https://lore.kernel.org/r/20250127091811.3183623-1-quzicheng@huawei.com [1]
Link: https://lore.kernel.org/r/20250211-work-acct-v1-1-1c16aecab8b3@kernel.org
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Zicheng Qu <quzicheng@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5644c6b50ffee0a56c1e01430a8c88e34decb120 ]
The generic_map_lookup_batch currently returns EINTR if it fails with
ENOENT and retries several times on bpf_map_copy_value. The next batch
would start from the same location, presuming it's a transient issue.
This is incorrect if a map can actually have "holes", i.e.
"get_next_key" can return a key that does not point to a valid value. At
least the array of maps type may contain such holes legitly. Right now
these holes show up, generic batch lookup cannot proceed any more. It
will always fail with EINTR errors.
Rather, do not retry in generic_map_lookup_batch. If it finds a non
existing element, skip to the next key. This simple solution comes with
a price that transient errors may not be recovered, and the iteration
might cycle back to the first key under parallel deletion. For example,
Hou Tao <houtao@huaweicloud.com> pointed out a following scenario:
For LPM trie map:
(1) ->map_get_next_key(map, prev_key, key) returns a valid key
(2) bpf_map_copy_value() return -ENOMENT
It means the key must be deleted concurrently.
(3) goto next_key
It swaps the prev_key and key
(4) ->map_get_next_key(map, prev_key, key) again
prev_key points to a non-existing key, for LPM trie it will treat just
like prev_key=NULL case, the returned key will be duplicated.
With the retry logic, the iteration can continue to the key next to the
deleted one. But if we directly skip to the next key, the iteration loop
would restart from the first key for the lpm_trie type.
However, not all races may be recovered. For example, if current key is
deleted after instead of before bpf_map_copy_value, or if the prev_key
also gets deleted, then the loop will still restart from the first key
for lpm_tire anyway. For generic lookup it might be better to stay
simple, i.e. just skip to the next key. To guarantee that the output
keys are not duplicated, it is better to implement map type specific
batch operations, which can properly lock the trie and synchronize with
concurrent mutators.
Fixes: cb4d03ab49 ("bpf: Add generic support for lookup batch op")
Closes: https://lore.kernel.org/bpf/Z6JXtA1M5jAZx8xD@debian.debian/
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/85618439eea75930630685c467ccefeac0942e2b.1739171594.git.yan@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6bb05a33337b2c842373857b63de5c9bf1ae2a09 ]
The following bug report happened with a PREEMPT_RT kernel:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 2012, name: kwatchdog
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
get_random_u32+0x4f/0x110
clocksource_verify_choose_cpus+0xab/0x1a0
clocksource_verify_percpu.part.0+0x6b/0x330
clocksource_watchdog_kthread+0x193/0x1a0
It is due to the fact that clocksource_verify_choose_cpus() is invoked with
preemption disabled. This function invokes get_random_u32() to obtain
random numbers for choosing CPUs. The batched_entropy_32 local lock and/or
the base_crng.lock spinlock in driver/char/random.c will be acquired during
the call. In PREEMPT_RT kernel, they are both sleeping locks and so cannot
be acquired in atomic context.
Fix this problem by using migrate_disable() to allow smp_processor_id() to
be reliably used without introducing atomic context. preempt_disable() is
then called after clocksource_verify_choose_cpus() but before the
clocksource measurement is being run to avoid introducing unexpected
latency.
Fixes: 7560c02bdf ("clocksource: Check per-CPU clock synchronization when marked unstable")
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/all/20250131173323.891943-2-longman@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f566840a82982141f94086061927a90e79440e5 ]
The "Checking clocksource synchronization" message is normally printed
when clocksource_verify_percpu() is called for a given clocksource if
both the CLOCK_SOURCE_UNSTABLE and CLOCK_SOURCE_VERIFY_PERCPU flags
are set.
It is an informational message and so pr_info() is the correct choice.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20250125015442.3740588-1-longman@redhat.com
Stable-dep-of: 6bb05a33337b ("clocksource: Use migrate_disable() to avoid calling get_random_u32() in atomic context")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b69bb476dee99d564d65d418e9a20acca6f32c3f upstream.
Tejun reported the following race between fork() and cgroup.kill at [1].
Tejun:
I was looking at cgroup.kill implementation and wondering whether there
could be a race window. So, __cgroup_kill() does the following:
k1. Set CGRP_KILL.
k2. Iterate tasks and deliver SIGKILL.
k3. Clear CGRP_KILL.
The copy_process() does the following:
c1. Copy a bunch of stuff.
c2. Grab siglock.
c3. Check fatal_signal_pending().
c4. Commit to forking.
c5. Release siglock.
c6. Call cgroup_post_fork() which puts the task on the css_set and tests
CGRP_KILL.
The intention seems to be that either a forking task gets SIGKILL and
terminates on c3 or it sees CGRP_KILL on c6 and kills the child. However, I
don't see what guarantees that k3 can't happen before c6. ie. After a
forking task passes c5, k2 can take place and then before the forking task
reaches c6, k3 can happen. Then, nobody would send SIGKILL to the child.
What am I missing?
This is indeed a race. One way to fix this race is by taking
cgroup_threadgroup_rwsem in write mode in __cgroup_kill() as the fork()
side takes cgroup_threadgroup_rwsem in read mode from cgroup_can_fork()
to cgroup_post_fork(). However that would be heavy handed as this adds
one more potential stall scenario for cgroup.kill which is usually
called under extreme situation like memory pressure.
To fix this race, let's maintain a sequence number per cgroup which gets
incremented on __cgroup_kill() call. On the fork() side, the
cgroup_can_fork() will cache the sequence number locally and recheck it
against the cgroup's sequence number at cgroup_post_fork() site. If the
sequence numbers mismatch, it means __cgroup_kill() can been called and
we should send SIGKILL to the newly created task.
Reported-by: Tejun Heo <tj@kernel.org>
Closes: https://lore.kernel.org/all/Z5QHE2Qn-QZ6M-KW@slm.duckdns.org/ [1]
Fixes: 661ee62809 ("cgroup: introduce cgroup.kill")
Cc: stable@vger.kernel.org # v5.14+
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit db5fd3cf8bf41b84b577b8ad5234ea95f327c9be ]
The CPU usage time is the time when user, system or both are using the CPU.
Steal time is the time when CPU is waiting to be run by the Hypervisor. It
should not be added to the CPU usage time, hence removing it from the
usage_usec entry.
Fixes: 936f2a70f2 ("cgroup: add cpu.stat file to root cgroup")
Acked-by: Axel Busch <axel.busch@ibm.com>
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Muhammad Adeel <muhammad.adeel@ibm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d6f83df8ff2d5de84b50377e4f0d45e25311c7a ]
Shifting 1 << 31 on a 32-bit int causes signed integer overflow, which
leads to undefined behavior. To prevent this, cast 1 to u32 before
performing the shift, ensuring well-defined behavior.
This change explicitly avoids any potential overflow by ensuring that
the shift occurs on an unsigned 32-bit integer.
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240928113608.1438087-1-visitorckw@gmail.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 108ad0999085df2366dd9ef437573955cb3f5586 ]
When steal time exceeds the measured delta when updating clock_task, we
currently try to catch up the excess in future updates.
However, this results in inaccurate run times for the future things using
clock_task, in some situations, as they end up getting additional steal
time that did not actually happen.
This is because there is a window between reading the elapsed time in
update_rq_clock() and sampling the steal time in update_rq_clock_task().
If the VCPU gets preempted between those two points, any additional
steal time is accounted to the outgoing task even though the calculated
delta did not actually contain any of that "stolen" time.
When this race happens, we can end up with steal time that exceeds the
calculated delta, and the previous code would try to catch up that excess
steal time in future clock updates, which is given to the next,
incoming task, even though it did not actually have any time stolen.
This behavior is particularly bad when steal time can be very long,
which we've seen when trying to extend steal time to contain the duration
that the host was suspended [0]. When this happens, clock_task stays
frozen, during which the running task stays running for the whole
duration, since its run time doesn't increase.
However the race can happen even under normal operation.
Ideally we would read the elapsed cpu time and the steal time atomically,
to prevent this race from happening in the first place, but doing so
is non-trivial.
Since the time between those two points isn't otherwise accounted anywhere,
neither to the outgoing task nor the incoming task (because the "end of
outgoing task" and "start of incoming task" timestamps are the same),
I would argue that the right thing to do is to simply drop any excess steal
time, in order to prevent these issues.
[0] https://lore.kernel.org/kvm/20240820043543.837914-1-suleiman@google.com/
Signed-off-by: Suleiman Souhlal <suleiman@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241118043745.1857272-1-suleiman@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e20a70c572539a486dbd91b225fa6a194a5e2122 ]
In hibernation_platform_enter(), the code did not check the
return value of syscore_suspend(), potentially leading to a
situation where syscore_resume() would be called even if
syscore_suspend() failed. This could cause unpredictable
behavior or system instability.
Modify the code sequence in question to properly handle errors returned
by syscore_suspend(). If an error occurs in the suspend path, the code
now jumps to label 'Enable_irqs' skipping the syscore_resume() call and
only enabling interrupts after setting the system state to SYSTEM_RUNNING.
Fixes: 40dc166cb5 ("PM / Core: Introduce struct syscore_ops for core subsystems PM")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20250119143205.2103-1-vulab@iscas.ac.cn
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd7d37ccf6b11f3d95e797ebe4e9e886d0332600 ]
Although the previous patch can avoid ps and ps UAF for _do_serial, it
can not avoid potential UAF issue for reorder_work. This issue can
happen just as below:
crypto_request crypto_request crypto_del_alg
padata_do_serial
...
padata_reorder
// processes all remaining
// requests then breaks
while (1) {
if (!padata)
break;
...
}
padata_do_serial
// new request added
list_add
// sees the new request
queue_work(reorder_work)
padata_reorder
queue_work_on(squeue->work)
...
<kworker context>
padata_serial_worker
// completes new request,
// no more outstanding
// requests
crypto_del_alg
// free pd
<kworker context>
invoke_padata_reorder
// UAF of pd
To avoid UAF for 'reorder_work', get 'pd' ref before put 'reorder_work'
into the 'serial_wq' and put 'pd' ref until the 'serial_wq' finish.
Fixes: bbefa1dd6a ("crypto: pcrypt - Avoid deadlock by using per-instance padata queues")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae154202cc6a189b035359f3c4e143d5c24d5352 ]
Add helpers for pd to get/put refcnt to make code consice.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: dd7d37ccf6b1 ("padata: avoid UAF for reorder_work")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e01780ea4661172734118d2a5f41bc9720765668 ]
A bug was found when run ltp test:
BUG: KASAN: slab-use-after-free in padata_find_next+0x29/0x1a0
Read of size 4 at addr ffff88bbfe003524 by task kworker/u113:2/3039206
CPU: 0 PID: 3039206 Comm: kworker/u113:2 Kdump: loaded Not tainted 6.6.0+
Workqueue: pdecrypt_parallel padata_parallel_worker
Call Trace:
<TASK>
dump_stack_lvl+0x32/0x50
print_address_description.constprop.0+0x6b/0x3d0
print_report+0xdd/0x2c0
kasan_report+0xa5/0xd0
padata_find_next+0x29/0x1a0
padata_reorder+0x131/0x220
padata_parallel_worker+0x3d/0xc0
process_one_work+0x2ec/0x5a0
If 'mdelay(10)' is added before calling 'padata_find_next' in the
'padata_reorder' function, this issue could be reproduced easily with
ltp test (pcrypt_aead01).
This can be explained as bellow:
pcrypt_aead_encrypt
...
padata_do_parallel
refcount_inc(&pd->refcnt); // add refcnt
...
padata_do_serial
padata_reorder // pd
while (1) {
padata_find_next(pd, true); // using pd
queue_work_on
...
padata_serial_worker crypto_del_alg
padata_put_pd_cnt // sub refcnt
padata_free_shell
padata_put_pd(ps->pd);
// pd is freed
// loop again, but pd is freed
// call padata_find_next, UAF
}
In the padata_reorder function, when it loops in 'while', if the alg is
deleted, the refcnt may be decreased to 0 before entering
'padata_find_next', which leads to UAF.
As mentioned in [1], do_serial is supposed to be called with BHs disabled
and always happen under RCU protection, to address this issue, add
synchronize_rcu() in 'padata_free_shell' wait for all _do_serial calls
to finish.
[1] https://lore.kernel.org/all/20221028160401.cccypv4euxikusiq@parnassus.localdomain/
[2] https://lore.kernel.org/linux-kernel/jfjz5d7zwbytztackem7ibzalm5lnxldi2eofeiczqmqs2m7o6@fq426cwnjtkm/
Fixes: b128a30409 ("padata: allocate workqueue internally")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Qu Zicheng <quzicheng@huawei.com>
Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ff6e943bce67d125781fe4780a5d6f072dc44c0 ]
padata_sysfs_store() was copied from padata_sysfs_show() but this check
was not adapted. Today there is no attribute which can fail this
check, but if there is one it may as well be correct.
Fixes: 5e017dc3f8 ("padata: Added sysfs primitives to padata subsystem")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e461a1cb43d69d2fc8a97e61916dce571e6bb31 ]
A redundant frequency update is only truly needed when there is a policy
limits change with a driver that specifies CPUFREQ_NEED_UPDATE_LIMITS.
In spite of that, drivers specifying CPUFREQ_NEED_UPDATE_LIMITS receive a
frequency update _all the time_, not just for a policy limits change,
because need_freq_update is never cleared.
Furthermore, ignore_dl_rate_limit()'s usage of need_freq_update also leads
to a redundant frequency update, regardless of whether or not the driver
specifies CPUFREQ_NEED_UPDATE_LIMITS, when the next chosen frequency is the
same as the current one.
Fix the superfluous updates by only honoring CPUFREQ_NEED_UPDATE_LIMITS
when there's a policy limits change, and clearing need_freq_update when a
requisite redundant update occurs.
This is neatly achieved by moving up the CPUFREQ_NEED_UPDATE_LIMITS test
and instead setting need_freq_update to false in sugov_update_next_freq().
Fixes: 600f5badb7 ("cpufreq: schedutil: Don't skip freq update when limits change")
Signed-off-by: Sultan Alsawaf (unemployed) <sultan@kerneltoast.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/20241212015734.41241-2-sultan@kerneltoast.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d187a77f04c14fb459a5301d69f733a5a1396bc ]
Commit 1b57d91b96 ("irqchip/gic-v2, v3: Prevent SW resends entirely")
sett the flag which enforces interrupt handling in interrupt context and
prevents software base resends for ARM GIC v2/v3.
But it missed that the helper function which checks the flag was hidden
behind CONFIG_GENERIC_PENDING_IRQ, which is not set by ARM[64].
Make the helper unconditionally available so that the enforcement actually
works.
Fixes: 1b57d91b96 ("irqchip/gic-v2, v3: Prevent SW resends entirely")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241210101811.497716609@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a430d99e349026d53e2557b7b22bd2ebd61fe12a ]
In /proc/schedstat, lb_hot_gained reports the number hot tasks pulled
during load balance. This value is incremented in can_migrate_task()
if the task is migratable and hot. After incrementing the value,
load balancer can still decide not to migrate this task leading to wrong
accounting. Fix this by incrementing stats when hot tasks are detached.
This issue only exists in detach_tasks() where we can decide to not
migrate hot task even if it is migratable. However, in detach_one_task(),
we migrate it unconditionally.
[Swapnil: Handled the case where nr_failed_migrations_hot was not accounted properly and wrote commit log]
Fixes: d31980846f ("sched: Move up affinity check to mitigate useless redoing overhead")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: "Gautham R. Shenoy" <gautham.shenoy@amd.com>
Not-yet-signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241220063224.17767-2-swapnil.sapkal@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52b33d87b9 ]
The commit d583d360a6 ("psi: Fix psi state corruption when schedule()
races with cgroup move") fixed a race problem by making cgroup_move_task()
use task->psi_flags instead of looking at the scheduler state.
We can extend task->psi_flags usage to CPU migration, which should be
a minor optimization for performance and code simplicity.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lore.kernel.org/r/20220926081931.45420-1-zhouchengming@bytedance.com
Stable-dep-of: a430d99e3490 ("sched/fair: Fix value reported by hot tasks pulled in /proc/schedstat")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6675ce20046d149e1e1ffe7e9577947dee17aad5 upstream.
do_softirq_post_smp_call_flush() on PREEMPT_RT kernels carries a
WARN_ON_ONCE() for any SOFTIRQ being raised from an SMP-call-function.
Since do_softirq_post_smp_call_flush() is called with preempt disabled,
raising a SOFTIRQ during flush_smp_call_function_queue() can lead to
longer preempt disabled sections.
Since commit b2a02fc43a ("smp: Optimize
send_call_function_single_ipi()") IPIs to an idle CPU in
TIF_POLLING_NRFLAG mode can be optimized out by instead setting
TIF_NEED_RESCHED bit in idle task's thread_info and relying on the
flush_smp_call_function_queue() in the idle-exit path to run the
SMP-call-function.
To trigger an idle load balancing, the scheduler queues
nohz_csd_function() responsible for triggering an idle load balancing on
a target nohz idle CPU and sends an IPI. Only now, this IPI is optimized
out and the SMP-call-function is executed from
flush_smp_call_function_queue() in do_idle() which can raise a
SCHED_SOFTIRQ to trigger the balancing.
So far, this went undetected since, the need_resched() check in
nohz_csd_function() would make it bail out of idle load balancing early
as the idle thread does not clear TIF_POLLING_NRFLAG before calling
flush_smp_call_function_queue(). The need_resched() check was added with
the intent to catch a new task wakeup, however, it has recently
discovered to be unnecessary and will be removed in the subsequent
commit after which nohz_csd_function() can raise a SCHED_SOFTIRQ from
flush_smp_call_function_queue() to trigger an idle load balance on an
idle target in TIF_POLLING_NRFLAG mode.
nohz_csd_function() bails out early if "idle_cpu()" check for the
target CPU, and does not lock the target CPU's rq until the very end,
once it has found tasks to run on the CPU and will not inhibit the
wakeup of, or running of a newly woken up higher priority task. Account
for this and prevent a WARN_ON_ONCE() when SCHED_SOFTIRQ is raised from
flush_smp_call_function_queue().
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20241119054432.6405-2-kprateek.nayak@amd.com
Tested-by: Felix Moessbauer <felix.moessbauer@siemens.com>
Signed-off-by: Florian Bezdeka <florian.bezdeka@siemens.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2f8dea1692eef2b7ba6a256246ed82c365fdc686 upstream.
Consider a scenario where a CPU transitions from CPUHP_ONLINE to halfway
through a CPU hotunplug down to CPUHP_HRTIMERS_PREPARE, and then back to
CPUHP_ONLINE:
Since hrtimers_prepare_cpu() does not run, cpu_base.hres_active remains set
to 1 throughout. However, during a CPU unplug operation, the tick and the
clockevents are shut down at CPUHP_AP_TICK_DYING. On return to the online
state, for instance CFS incorrectly assumes that the hrtick is already
active, and the chance of the clockevent device to transition to oneshot
mode is also lost forever for the CPU, unless it goes back to a lower state
than CPUHP_HRTIMERS_PREPARE once.
This round-trip reveals another issue; cpu_base.online is not set to 1
after the transition, which appears as a WARN_ON_ONCE in enqueue_hrtimer().
Aside of that, the bulk of the per CPU state is not reset either, which
means there are dangling pointers in the worst case.
Address this by adding a corresponding startup() callback, which resets the
stale per CPU state and sets the online flag.
[ tglx: Make the new callback unconditionally available, remove the online
modification in the prepare() callback and clear the remaining
state in the starting callback instead of the prepare callback ]
Fixes: 5c0930ccaad5 ("hrtimers: Push pending hrtimers away from outgoing CPU earlier")
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20241220134421.3809834-1-koichiro.den@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 973b710b8821c3401ad7a25360c89e94b26884ac ]
Tell tar to ignore silly-rename files (".__afs*" and ".nfs*") when building
the header archive. These occur when a file that is open is unlinked
locally, but hasn't yet been closed. Such files are visible to the user
via the getdents() syscall and so programs may want to do things with them.
During the kernel build, such files may be made during the processing of
header files and the cleanup may get deferred by fput() which may result in
tar seeing these files when it reads the directory, but they may have
disappeared by the time it tries to open them, causing tar to fail with an
error. Further, we don't want to include them in the tarball if they still
exist.
With CONFIG_HEADERS_INSTALL=y, something like the following may be seen:
find: './kernel/.tmp_cpio_dir/include/dt-bindings/reset/.__afs2080': No such file or directory
tar: ./include/linux/greybus/.__afs3C95: File removed before we read it
The find warning doesn't seem to cause a problem.
Fix this by telling tar when called from in gen_kheaders.sh to exclude such
files. This only affects afs and nfs; cifs uses the Windows Hidden
attribute to prevent the file from being seen.
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/20241213135013.2964079-2-dhowells@redhat.com
cc: Masahiro Yamada <masahiroy@kernel.org>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-nfs@vger.kernel.org
cc: linux-kernel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8ea607330a39184f51737c6ae706db7fdca7628e upstream.
Lonial reported an issue in the BPF verifier where check_mem_size_reg()
has the following code:
if (!tnum_is_const(reg->var_off))
/* For unprivileged variable accesses, disable raw
* mode so that the program is required to
* initialize all the memory that the helper could
* just partially fill up.
*/
meta = NULL;
This means that writes are not checked when the register containing the
size of the passed buffer has not a fixed size. Through this bug, a BPF
program can write to a map which is marked as read-only, for example,
.rodata global maps.
The problem is that MEM_UNINIT's initial meaning that "the passed buffer
to the BPF helper does not need to be initialized" which was added back
in commit 435faee1aa ("bpf, verifier: add ARG_PTR_TO_RAW_STACK type")
got overloaded over time with "the passed buffer is being written to".
The problem however is that checks such as the above which were added later
via 06c1c04972 ("bpf: allow helpers access to variable memory") set meta
to NULL in order force the user to always initialize the passed buffer to
the helper. Due to the current double meaning of MEM_UNINIT, this bypasses
verifier write checks to the memory (not boundary checks though) and only
assumes the latter memory is read instead.
Fix this by reverting MEM_UNINIT back to its original meaning, and having
MEM_WRITE as an annotation to BPF helpers in order to then trigger the
BPF verifier checks for writing to memory.
Some notes: check_arg_pair_ok() ensures that for ARG_CONST_SIZE{,_OR_ZERO}
we can access fn->arg_type[arg - 1] since it must contain a preceding
ARG_PTR_TO_MEM. For check_mem_reg() the meta argument can be removed
altogether since we do check both BPF_READ and BPF_WRITE. Same for the
equivalent check_kfunc_mem_size_reg().
Fixes: 7b3552d3f9 ("bpf: Reject writes for PTR_TO_MAP_KEY in check_helper_mem_access")
Fixes: 97e6d7dab1 ("bpf: Check PTR_TO_MEM | MEM_RDONLY in check_helper_mem_access")
Fixes: 15baa55ff5 ("bpf/verifier: allow all functions to read user provided context")
Reported-by: Lonial Con <kongln9170@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241021152809.33343-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: BRUNO VERNAY <bruno.vernay@se.com>
Signed-off-by: Hugo SIMELIERE <hsimeliere.opensource@witekio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6fad274f06f038c29660aa53fbad14241c9fd976 upstream.
Add a MEM_WRITE attribute for BPF helper functions which can be used in
bpf_func_proto to annotate an argument type in order to let the verifier
know that the helper writes into the memory passed as an argument. In
the past MEM_UNINIT has been (ab)used for this function, but the latter
merely tells the verifier that the passed memory can be uninitialized.
There have been bugs with overloading the latter but aside from that
there are also cases where the passed memory is read + written which
currently cannot be expressed, see also 4b3786a6c539 ("bpf: Zero former
ARG_PTR_TO_{LONG,INT} args in case of error").
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20241021152809.33343-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: BRUNO VERNAY <bruno.vernay@se.com>
Signed-off-by: Hugo SIMELIERE <hsimeliere.opensource@witekio.com>
Stable-dep-of: 8ea607330a39 ("bpf: Fix overloading of MEM_UNINIT's meaning")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c4441ca86afe4814039ee1b32c39d833c1a16bbc ]
The bpf_remove_insns() function returns WARN_ON_ONCE(error), where
error is a result of bpf_adj_branches(), and thus should be always 0
However, if for any reason it is not 0, then it will be converted to
boolean by WARN_ON_ONCE and returned to user space as 1, not an actual
error value. Fix this by returning the original err after the WARN check.
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241210114245.836164-1-aspsk@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit afc6717628f959941d7b33728570568b4af1c4b8 upstream.
In order to catch a common bug where a TRACE_EVENT() TP_fast_assign()
assigns an address of an allocated string to the ring buffer and then
references it in TP_printk(), which can be executed hours later when the
string is free, the function test_event_printk() runs on all events as
they are registered to make sure there's no unwanted dereferencing.
It calls process_string() to handle cases in TP_printk() format that has
"%s". It returns whether or not the string is safe. But it can have some
false positives.
For instance, xe_bo_move() has:
TP_printk("move_lacks_source:%s, migrate object %p [size %zu] from %s to %s device_id:%s",
__entry->move_lacks_source ? "yes" : "no", __entry->bo, __entry->size,
xe_mem_type_to_name[__entry->old_placement],
xe_mem_type_to_name[__entry->new_placement], __get_str(device_id))
Where the "%s" references into xe_mem_type_to_name[]. This is an array of
pointers that should be safe for the event to access. Instead of flagging
this as a bad reference, if a reference points to an array, where the
record field is the index, consider it safe.
Link: https://lore.kernel.org/all/9dee19b6185d325d0e6fa5f7cbba81d007d99166.camel@sapience.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20241231000646.324fb5f7@gandalf.local.home
Fixes: 65a25d9f7ac02 ("tracing: Add "%s" check in test_event_printk()")
Reported-by: Genes Lists <lists@sapience.com>
Tested-by: Gene C <arch@sapience.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8421d4c8762bd022cb491f2f0f7019ef51b4f0a7 upstream.
If a newly-added link type doesn't invoke BPF_LINK_TYPE(), accessing
bpf_link_type_strs[link->type] may result in an out-of-bounds access.
To spot such missed invocations early in the future, checking the
validity of link->type in bpf_link_show_fdinfo() and emitting a warning
when such invocations are missed.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241024013558.1135167-3-houtao@huaweicloud.com
[ shung-hsi.yu: break up existing seq_printf() call since commit 68b04864ca
("bpf: Create links for BPF struct_ops maps.") is not present ]
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d685d55dfc86b1a4bdcec77c3c1f8a83f181264e ]
Make sure the trace_kprobe's module notifer callback function is called
after jump_label's callback is called. Since the trace_kprobe's callback
eventually checks jump_label address during registering new kprobe on
the loading module, jump_label must be updated before this registration
happens.
Link: https://lore.kernel.org/all/173387585556.995044.3157941002975446119.stgit@devnote2/
Fixes: 6142431810 ("tracing/kprobes: Support module init function probing")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 65a25d9f7ac02e0cf361356e834d1c71d36acca9 upstream.
The test_event_printk() code makes sure that when a trace event is
registered, any dereferenced pointers in from the event's TP_printk() are
pointing to content in the ring buffer. But currently it does not handle
"%s", as there's cases where the string pointer saved in the ring buffer
points to a static string in the kernel that will never be freed. As that
is a valid case, the pointer needs to be checked at runtime.
Currently the runtime check is done via trace_check_vprintf(), but to not
have to replicate everything in vsnprintf() it does some logic with the
va_list that may not be reliable across architectures. In order to get rid
of that logic, more work in the test_event_printk() needs to be done. Some
of the strings can be validated at this time when it is obvious the string
is valid because the string will be saved in the ring buffer content.
Do all the validation of strings in the ring buffer at boot in
test_event_printk(), and make sure that the field of the strings that
point into the kernel are accessible. This will allow adding checks at
runtime that will validate the fields themselves and not rely on paring
the TP_printk() format at runtime.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20241217024720.685917008@goodmis.org
Fixes: 5013f454a3 ("tracing: Add check of trace event print fmts for dereferencing pointers")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
