Usage of phy_ethtool_get_link_ksettings() in the link status change
handler isn't needed, and in combination with the referenced change
it results in a deadlock. Simply remove the call and replace it with
direct access to phydev->speed. The duplex argument of
lan743x_phy_update_flowcontrol() isn't used and can be removed.
Fixes: c10a485c3d ("phy: phy_ethtool_ksettings_get: Lock the phy for consistency")
Reported-by: Alessandro B Maurici <abmaurici@gmail.com>
Tested-by: Alessandro B Maurici <abmaurici@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/40e27f76-0ba3-dcef-ee32-a78b9df38b0f@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While testing BIG TCP patch series, I was expecting that TCP_RR workloads
with 80KB requests/answers would send one 80KB TSO packet,
then being received as a single GRO packet.
It turns out this was not happening, and the root cause was that
cubic Hystart ACK train was triggering after a few (2 or 3) rounds of RPC.
Hystart was wrongly setting CWND/SSTHRESH to 30, while my RPC
needed a budget of ~20 segments.
Ideally these TCP_RR flows should not exit slow start.
Cubic Hystart should reset itself at each round, instead of assuming
every TCP flow is a bulk one.
Note that even after this patch, Hystart can still trigger, depending
on scheduling artifacts, but at a higher CWND/SSTHRESH threshold,
keeping optimal TSO packet sizes.
Tested:
ip link set dev eth0 gro_ipv6_max_size 131072 gso_ipv6_max_size 131072
nstat -n; netperf -H ... -t TCP_RR -l 5 -- -r 80000,80000 -K cubic; nstat|egrep "Ip6InReceives|Hystart|Ip6OutRequests"
Before:
8605
Ip6InReceives 87541 0.0
Ip6OutRequests 129496 0.0
TcpExtTCPHystartTrainDetect 1 0.0
TcpExtTCPHystartTrainCwnd 30 0.0
After:
8760
Ip6InReceives 88514 0.0
Ip6OutRequests 87975 0.0
Fixes: ae27e98a51 ("[TCP] CUBIC v2.3")
Co-developed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Link: https://lore.kernel.org/r/20211123202535.1843771-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2021-11-24
A fix from Alexander which has been brought up various times found by
automated checkers. Make sure values are in u32 range.
* tag 'ieee802154-for-net-2021-11-24' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan:
net: ieee802154: handle iftypes as u32
====================
Link: https://lore.kernel.org/r/20211124150934.3670248-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The system will crash if we put an uninitialized iova_domain, this
could happen when an error occurs before initializing the iova_domain
in vdpasim_create().
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
RIP: 0010:__cpuhp_state_remove_instance+0x96/0x1c0
...
Call Trace:
<TASK>
put_iova_domain+0x29/0x220
vdpasim_free+0xd1/0x120 [vdpa_sim]
vdpa_release_dev+0x21/0x40 [vdpa]
device_release+0x33/0x90
kobject_release+0x63/0x160
vdpasim_create+0x127/0x2a0 [vdpa_sim]
vdpasim_net_dev_add+0x7d/0xfe [vdpa_sim_net]
vdpa_nl_cmd_dev_add_set_doit+0xe1/0x1a0 [vdpa]
genl_family_rcv_msg_doit+0x112/0x140
genl_rcv_msg+0xdf/0x1d0
...
So we must make sure the iova_domain is already initialized before
put it.
In addition, we may get the following warning in this case:
WARNING: ... drivers/iommu/iova.c:344 iova_cache_put+0x58/0x70
So we must make sure the iova_cache_put() is invoked only if the
iova_cache_get() is already invoked. Let's fix it together.
Cc: stable@vger.kernel.org
Fixes: 4080fc1067 ("vdpa_sim: use iova module to allocate IOVA addresses")
Signed-off-by: Longpeng <longpeng2@huawei.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20211124015215.119-1-longpeng2@huawei.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 939779f515.
Attempts to validate length in the core did not work out: there turn out
to exist multiple broken devices, and in particular legacy devices are
known to be broken in this respect.
We have ideas for handling this better in the next version but for now
let's revert to a known good state to make sure drivers work for people.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit 816625c136.
Attempts to validate length in the core did not work out.
We'll drop them, so revert the dependent changes in drivers.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit a40392edf1.
Attempts to validate length in the core did not work out.
We'll drop them, so revert the dependent changes in drivers.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This reverts commit c57911ebfb.
Attempts to validate length in the core did not work out. We'll drop
them for now, so revert the dependent changes in drivers.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If xnack is on, VM retry fault interrupt send to IH ring1, and ring1
will be full quickly. IH cannot receive other interrupts, this causes
deadlock if migrating buffer using sdma and waiting for sdma done
while handling retry fault.
Remove VMC from IH storm client, enable ring1 write pointer
overflow, then IH will drop retry fault interrupts and be able to receive
other interrupts while driver is handling retry fault.
IH ring1 write pointer doesn't writeback to memory by IH, and ring1
write pointer recorded by self-irq is not updated, so always read
the latest ring1 write pointer from register.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
unmap range always increase atomic svms->drain_pagefaults to simplify
both parent range and child range unmap, page fault handle ignores the
retry fault if svms->drain_pagefaults is set to speed up interrupt
handling. svm_range_drain_retry_fault restart draining if another
range unmap from cpu.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VMA may be removed before unmap notifier callback, and deferred list
work remove range, return success for this special case as we are
handling stale retry fault.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfd_process_wq_release drain retry fault to ensure no retry fault comes
after removing kfd process from the hash table, otherwise svm page fault
handler will fail to recover the fault and dump GPU vm fault log.
Refactor deferred list work to get_task_mm and take mmap write lock
to handle all ranges, and avoid mm is gone while inserting mmu notifier.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Renoir and newer gfx9 APUs have new TSC register that is
not part of the gfxoff tile, so it can be read without
needing to disable gfx off.
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: 9f4f2c1a35 ("drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov")
For sriov XGMI configuration, the host driver will handle the hive reset,
so in guest side, the reset_sriov only be called once on one device. This will
make kfd post_reset unblanced with kfd pre_reset since kfd pre_reset already
been moved out of reset_sriov function. Move kfd post_reset out of reset_sriov
function to make them balance .
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Due to pass the wrong parameter down to the enable_stream_gating(),
it would cause the DSC of the removing stream would not be PG.
[HOW]
To pass the correct parameter down th the enable_stream_gating().
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Yi-Ling Chen <Yi-Ling.Chen2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
A warning appears in the log on GPU reset for
link_enc_cfg_link_encs_assign for the following condition:
ASSERT(state->res_ctx.link_enc_cfg_ctx.link_enc_assignments[i].valid == false);
This is not expected behavior and may result in link encoders being
incorrectly assigned.
[How]
The dc->current_state is backed up into dm->cached_dc_state before
we commit 0 streams.
DC will clear link encoder assignments on the real state but the
changes won't propagate over to the copy we made before the
0 streams commit.
DC expects that link encoder assignments are *not* valid
when committing a state, so as a workaround it needs to be cleared
before passing it back into DC.
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We're only setting the flags on stream[0]'s planes so this logic fails
if we have more than one stream in the state.
This can cause a page flip timeout with multiple displays in the
configuration.
[How]
Index into the stream_status array using the stream index - it's a 1:1
mapping.
Fixes: cdaae8371a ("drm/amd/display: Handle GPU reset for DC block")
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The HW interrupt gets disabled after GPU reset so we don't receive
notifications for HPD or AUX from DMUB - leading to timeout and
black screen with (or without) DPIA links connected.
[How]
Re-enable the interrupt after GPU reset like we do for the other
DC interrupts.
Fixes: 81927e2808 ("drm/amd/display: Support for DMUB AUX")
Reviewed-by: Jude Shih <Jude.Shih@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_amdkfd_gpuvm_free_memory_of_gpu drop dmabuf reference increased in
amdgpu_gem_prime_export.
amdgpu_bo_destroy drop dmabuf reference increased in
amdgpu_gem_prime_import.
So remove this extra dma_buf_put to avoid double free.
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Tested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If xnack is on, VM retry fault interrupt send to IH ring1, and ring1
will be full quickly. IH cannot receive other interrupts, this causes
deadlock if migrating buffer using sdma and waiting for sdma done
while handling retry fault.
Remove VMC from IH storm client, enable ring1 write pointer
overflow, then IH will drop retry fault interrupts and be able to receive
other interrupts while driver is handling retry fault.
IH ring1 write pointer doesn't writeback to memory by IH, and ring1
write pointer recorded by self-irq is not updated, so always read
the latest ring1 write pointer from register.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
unmap range always increase atomic svms->drain_pagefaults to simplify
both parent range and child range unmap, page fault handle ignores the
retry fault if svms->drain_pagefaults is set to speed up interrupt
handling. svm_range_drain_retry_fault restart draining if another
range unmap from cpu.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VMA may be removed before unmap notifier callback, and deferred list
work remove range, return success for this special case as we are
handling stale retry fault.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfd_process_wq_release drain retry fault to ensure no retry fault comes
after removing kfd process from the hash table, otherwise svm page fault
handler will fail to recover the fault and dump GPU vm fault log.
Refactor deferred list work to get_task_mm and take mmap write lock
to handle all ranges, and avoid mm is gone while inserting mmu notifier.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise when IH process restart, count is zero, the loop will
not exit to wake_up_all after processing AMDGPU_IH_MAX_NUM_IVS
interrupts.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Print the error on command submission immediately after submitting to
the SMU. This is rate-limited. It helps to immediately know there was an
error on command submission, rather than leave it up to clients to report
the error, as sometimes they do not.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Acked-by: Alex Deucher <Alexander.Deucher@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add prints where there are none and none are printed in the callee.
Remove the word "previous" from comment and print to make it shorter and
avoid confusion in various prints.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Alex Deucher <Alexander.Deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After switching to generic framebuffer framework, we rely on the
->dumb_create routine for frame buffer creation. However, the
different domain flags used are not optimal. Add the contiguous
flag to directly allocate the scanout BO as one linear buffer.
Fixes: 087451f372 ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.")
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Renoir and newer gfx9 APUs have new TSC register that is
not part of the gfxoff tile, so it can be read without
needing to disable gfx off.
Acked-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
