In case of WM1811 device there are currently being registered controls
referring to registers not existing on that device.
It has been noticed when getting values of "AIF1ADC2 Volume", "AIF1DAC2
Volume" controls was failing during ALSA state restoring at boot time:
"amixer: Mixer hw:0 load error: Device or resource busy"
Reading some registers through I2C was failing with EBUSY error and
indeed these registers were not available according to the datasheet.
To fix this controls not available on WM1811 are moved to a separate
array and registered only for WM8994 and WM8958.
There are some further differences between WM8994 and WM1811,
e.g. registers 603h, 604h, 605h, which are not covered in this patch.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20190920130218.32690-2-s.nawrocki@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- Fix Tegra OF node reference leak (Nishka Dasgupta)
- Add #defines for PCIe Data Link Feature and Physical Layer 16.0 GT/s
features (Vidya Sagar)
- Disable MSI for Tegra Root Ports since they don't support using MSI for
all Root Port events (Vidya Sagar)
- Group DesignWare write-protected register writes together (Vidya Sagar)
- Move DesignWare capability search interfaces so they can be used by
both host and endpoint drivers (Vidya Sagar)
- Add DesignWare extended capability search interfaces (Vidya Sagar)
- Export dw_pcie_wait_for_link() so drivers can be modules (Vidya Sagar)
- Add "snps,enable-cdm-check" DT binding for Configuration Dependent
Module (CDM) register checking (Vidya Sagar)
- Add DesignWare support for "snps,enable-cdm-check" CDM checking (Vidya
Sagar)
- Add "supports-clkreq" DT binding for host drivers to decide whether to
advertise low power features (Vidya Sagar)
- Add DT binding for Tegra194 (Vidya Sagar)
- Add DT binding for Tegra194 P2U (PIPE to UPHY) block (Vidya Sagar)
- Add support for Tegra194 P2U (PIPE to UPHY) (Vidya Sagar)
- Add support for Tegra194 host controller (Vidya Sagar)
- Add Tegra support for sideband PERST# and CLKREQ# for C5 (Vidya Sagar)
- Add Tegra support for slot regulators for p2972-0000 platform (Vidya
Sagar)
* lorenzo/pci/tegra:
arm64: tegra: Add PCIe slot supply information in p2972-0000 platform
arm64: tegra: Add configuration for PCIe C5 sideband signals
PCI: tegra: Add support to enable slot regulators
PCI: tegra: Add support to configure sideband pins
dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries
dt-bindings: PCI: tegra: Add sideband pins configuration entries
PCI: tegra: Add Tegra194 PCIe support
phy: tegra: Add PCIe PIPE2UPHY support
dt-bindings: PHY: P2U: Add Tegra194 P2U block
dt-bindings: PCI: tegra: Add device tree support for Tegra194
dt-bindings: Add PCIe supports-clkreq property
PCI: dwc: Add support to enable CDM register check
dt-bindings: PCI: designware: Add binding for CDM register check
PCI: dwc: Export dw_pcie_wait_for_link() API
PCI: dwc: Add extended configuration space capability search API
PCI: dwc: Move config space capability search API
PCI: dwc: Group DBI registers writes requiring unlocking
PCI: Disable MSI for Tegra root ports
PCI: Add #defines for some of PCIe spec r4.0 features
PCI: tegra: Fix OF node reference leak
- Fix mobiveil inbound window CPU base address setup (Hou Zhiqiang)
* remotes/lorenzo/pci/mobiveil:
PCI: mobiveil: Fix the CPU base address setup in inbound window
- Propagate regulator_get_optional() errors so callers can distinguish
real errors from optional regulators that are absent (Thierry Reding)
- Propagate devm_of_phy_get() errors so callers can distinguish
real errors from optional PHYs that are absent (Thierry Reding)
- Add Andrew Murray as PCI native driver reviewer (Lorenzo Pieralisi)
* remotes/lorenzo/pci/misc:
MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer
PCI: iproc: Propagate errors for optional PHYs
PCI: histb: Propagate errors for optional regulators
PCI: armada8x: Propagate errors for optional PHYs
PCI: imx6: Propagate errors for optional regulators
PCI: exynos: Propagate errors for optional PHYs
PCI: rockchip: Propagate errors for optional regulators
- Add mediatek support for MT7629 (Jianjun Wang)
* remotes/lorenzo/pci/mediatek:
PCI: mediatek: Add controller support for MT7629
dt-bindings: PCI: Add support for MT7629
- Mark Layerscape endpoint BARs 2 and 4 as 64-bit (Xiaowei Bao)
- Add CONFIG_PCI_LAYERSCAPE_EP so EP/RC can be built separately (Xiaowei
Bao)
* remotes/lorenzo/pci/layerscape:
PCI: layerscape: Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC separately
PCI: layerscape: Add the bar_fixed_64bit property to the endpoint driver
- Fix Hyper-V use-after-free in pci_dev removal (Dexuan Cui)
- Fix Hyper-V build error in non-sysfs config (Randy Dunlap)
- Reallocate to avoid Hyper-V domain number collisions (Haiyang Zhang)
- Use Hyper-V instance ID bytes 4-5 to reduce domain collisions (Haiyang
Zhang)
* remotes/lorenzo/pci/hv:
PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers
PCI: hv: Detect and fix Hyper-V PCI domain number collision
PCI: pci-hyperv: Fix build errors on non-SYSFS config
PCI: hv: Avoid use of hv_pci_dev->pci_slot after freeing it
- Make kirin_dw_pcie_ops constant (Nishka Dasgupta)
- Make DesignWare "num-lanes" property optional and remove from relevant
DTs (Hou Zhiqiang)
* remotes/lorenzo/pci/dwc:
arm64: dts: fsl: Remove num-lanes property from PCIe nodes
ARM: dts: ls1021a: Remove num-lanes property from PCIe nodes
PCI: dwc: Return directly when num-lanes is not found
dt-bindings: PCI: designware: Remove the num-lanes from Required properties
PCI: kirin: Make structure kirin_dw_pcie_ops constant
- Convert pci_resource_to_user() to a weak function to remove
HAVE_ARCH_PCI_RESOURCE_TO_USER #defines (Denis Efremov)
- Use PCI_SRIOV_NUM_BARS for idiomatic loop structure (Denis Efremov)
- Fix Resizable BAR size suspend/restore for 1MB BARs (Sumit Saxena)
- Correct "pci=resource_alignment" example in documentation (Alexey
Kardashevskiy)
* pci/resource:
PCI: Correct pci=resource_alignment parameter example
PCI: Restore Resizable BAR size bits correctly for 1MB BARs
PCI: Use PCI_SRIOV_NUM_BARS in loops instead of PCI_IOV_RESOURCE_END
PCI: Convert pci_resource_to_user() to a weak function
# Conflicts:
# drivers/pci/pci.c
- Cleanup pciehp LED/indicator control with a new consolidated
pciehp_set_indicators() interface that controls both Attention and
Power Indicators (Denis Efremov)
* pci/pciehp:
PCI: pciehp: Refer to "Indicators" instead of "LEDs" in comments
PCI: pciehp: Remove pciehp_green_led_{on,off,blink}()
PCI: pciehp: Remove pciehp_set_attention_status()
PCI: pciehp: Combine adjacent indicator updates
PCI: pciehp: Add pciehp_set_indicators() to set both indicators
- Use devm_add_action_or_reset() helper (Fuqian Huang)
- Mark expected switch fall-through (Gustavo A. R. Silva)
- Convert sysfs device attributes from __ATTR() to DEVICE_ATTR() (Kelsey
Skunberg)
- Convert sysfs file permissions from S_IRUSR etc to octal (Kelsey
Skunberg)
- Move SR-IOV sysfs functions to iov.c (Kelsey Skunberg)
- Add pci_info_ratelimited() to ratelimit PCI messages separately
(Krzysztof Wilczynski)
- Fix "'static' not at beginning of declaration" warnings (Krzysztof
Wilczynski)
- Clean up resource_alignment parameter to not require static buffer
(Logan Gunthorpe)
- Add ACS quirk for iProc PAXB (Abhinav Ratna)
- Add pci_irq_vector() and other stubs for !CONFIG_PCI (Herbert Xu)
* pci/misc:
PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI
PCI: Add ACS quirk for iProc PAXB
PCI: Force trailing new line to resource_alignment_param in sysfs
PCI: Move pci_[get|set]_resource_alignment_param() into their callers
PCI: Clean up resource_alignment parameter to not require static buffer
PCI: Use static const struct, not const static struct
PCI: Add pci_info_ratelimited() to ratelimit PCI separately
PCI/IOV: Remove group write permission from sriov_numvfs, sriov_drivers_autoprobe
PCI/IOV: Move sysfs SR-IOV functions to iov.c
PCI: sysfs: Change permissions from symbolic to octal
PCI: sysfs: Change DEVICE_ATTR() to DEVICE_ATTR_WO()
PCI: sysfs: Define device attributes with DEVICE_ATTR*()
PCI: Mark expected switch fall-through
PCI: Use devm_add_action_or_reset()
- Consolidate _HPP & _HPX code in pci-acpi.h and remove unnecessary
struct hotplug_program_ops (Krzysztof Wilczynski)
- Fixup PCIe device types to remove the need for dev->has_secondary_link
(Mika Westerberg)
* pci/enumeration:
PCI: Get rid of dev->has_secondary_link flag
PCI: Make pcie_downstream_port() available outside of access.c
PCI/ACPI: Remove unnecessary struct hotplug_program_ops
PCI/ACPI: Move _HPP & _HPX functions to pci-acpi.c
PCI/ACPI: Rename _HPX structs from hpp_* to hpx_*
- Move many symbols from public linux/pci.h to subsystem-private
drivers/pci/pci.h (Kelsey Skunberg)
- Unexport pci_bus_get() and pci_bus_sem since they're not needed by
modules (Kelsey Skunberg)
- Remove unused pci_block_cfg_access() et al (Kelsey Skunberg)
* pci/encapsulate:
PCI: Make pci_set_of_node(), etc private
PCI: Make pci_enable_ptm() private
PCI: Make pcie_set_ecrc_checking(), pcie_ecrc_get_policy() private
PCI: Make pci_ats_init() private
PCI: Make pcie_update_link_speed() private
PCI: Make pci_bus_get(), pci_bus_put() private
PCI: Make pci_hotplug_io_size, mem_size, and bus_size private
PCI: Make pci_save_vc_state(), pci_restore_vc_state(), etc private
PCI: Make pci_get_host_bridge_device(), pci_put_host_bridge_device() private
PCI: Make pci_check_pme_status(), pci_pme_wakeup_bus() private
PCI: Make PCI_PM_* delay times private
PCI: Unexport pci_bus_sem
PCI: Unexport pci_bus_get() and pci_bus_put()
PCI: Remove pci_block_cfg_access() et al (unused)
User space programs like udevd may try to read to partitions at the
same time the driver detects a namespace is unusable, and may deadlock
if revalidate_disk() is called while such a process is waiting to
enter the frozen queue. On detecting a dead namespace, move the disk
revalidate after unblocking dispatchers that may be holding bd_butex.
changelog Suggested-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Balbir Singh <sblbir@amzn.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
In nvmet_bdev_set_limits() the number of logical blocks per
physical block is calculated, but the opposite is mentioned in
the associated comment and reflected in the variable name. Correct
the comment and adjust the variable name to reflect the calculation
done.
Signed-off-by: John Pittman <jpittman@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Currently, the knfsd server assumes that a short read indicates an
end of file. That assumption is incorrect. The short read means that
either we've hit the end of file, or we've hit a read error.
In the case of a read error, the client may want to retry (as per the
implementation recommendations in RFC1813 and RFC7530), but currently it
is being told that it hit an eof.
Move the code to detect eof from version specific code into the generic
nfsd read.
Report eof only in the two following cases:
1) read() returns a zero length short read with no error.
2) the offset+length of the read is >= the file size.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The collapse range operation can merge extents if two newly adjacent
extents are physically contiguous. If the extent count is reduced on
a btree format inode, a change to extent format might be necessary.
This format change currently occurs as a side effect of the file
size update after extents have been shifted for the collapse. This
codepath ultimately calls xfs_bunmapi(), which happens to check for
and execute the format conversion even if there were no blocks
removed from the mapping.
While this ultimately puts the inode into the correct state, the
fact the format conversion occurs in a separate transaction from the
change that called for it is a problem. If an extent shift
transaction commits and the filesystem happens to crash before the
format conversion, the inode fork is left in a corrupted state after
log recovery. The inode fork verifier fails and xfs_repair
ultimately nukes the inode. This problem was originally reproduced
by generic/388.
Similar to how the insert range extent split code handles extent to
btree conversion, update the collapse range extent merge code to
handle btree to extent format conversion in the same transaction
that merges the extents. This ensures that the inode fork format
remains consistent if the filesystem happens to crash in the middle
of a collapse range operation that changes the inode fork format.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Pull livepatching fix from Jiri Kosina:
"Error handling fix in livepatching module notifier, from Miroslav
Benes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
livepatch: Nullify obj->mod in klp_module_coming()'s error path
Pull HID updates from Jiri Kosina:
- syzbot memory corruption fixes for hidraw, Prodikeys, Logitech and
Sony drivers from Alan Stern and Roderick Colenbrander
- stuck 'fn' key fix for hid-apple from Joao Moreno
- proper propagation of EPOLLOUT from hiddev and hidraw, from Fabian
Henneke
- fixes for handling power management for intel-ish devices with NO_D3
flag set, from Zhang Lixu
- extension of supported usage range for customer page, as some
Logitech devices are actually making use of it. From Olivier Gay.
- hid-multitouch is no longer filtering mice node creation, from
Benjamin Tissoires
- MobileStudio Pro 13 support, from Ping Cheng
- a few other device ID additions and assorted smaller fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (27 commits)
HID: core: fix dmesg flooding if report field larger than 32bit
HID: core: Add printk_once variants to hid_warn() etc
HID: core: reformat and reduce hid_printk macros
HID: prodikeys: Fix general protection fault during probe
HID: wacom: add new MobileStudio Pro 13 support
HID: sony: Fix memory corruption issue on cleanup.
HID: i2c-hid: modify quirks for weida's devices
HID: apple: Fix stuck function keys when using FN
HID: sb0540: add support for Creative SB0540 IR receivers
HID: Add quirk for HP X500 PIXART OEM mouse
HID: logitech-dj: Fix crash when initial logi_dj_recv_query_paired_devices fails
hid-logitech-dj: add the new Lightspeed receiver
HID: logitech-dj: add support of the G700(s) receiver
HID: multitouch: add support for the Smart Tech panel
HID: multitouch: do not filter mice nodes
HID: do not call hid_set_drvdata(hdev, NULL) in drivers
HID: wacom: do not call hid_set_drvdata(hdev, NULL)
HID: logitech: Fix general protection fault caused by Logitech driver
HID: hidraw: Fix invalid read in hidraw_ioctl
HID: wacom: support named keys on older devices
...
Pull SafeSetID fix from Micah Morton:
"Jann Horn sent some patches to fix some bugs in SafeSetID for 5.3.
After he had done his testing there were a couple small code tweaks
that went in and caused this bug.
From what I can see SafeSetID is broken in 5.3 and crashes the kernel
every time during initialization if you try to use it. I came across
this bug when backporting Jann's changes for 5.3 to older kernels
(4.14 and 4.19). I've tested on a Chrome OS device with those kernels
and verified that this change fixes things.
It doesn't seem super useful to have this bake in linux-next, since it
is completely broken in 5.3 and nobody noticed"
* tag 'safesetid-bugfix-5.4' of git://github.com/micah-morton/linux:
LSM: SafeSetID: Stop releasing uninitialized ruleset
Droid4 needs USB option serial driver for modem, and lm3532 for the
LCD backlight.
Note that the LCD backlight does not yet get enabled automatically,
but needs to be done manually with:
# echo 50 > /sys/class/leds/lm3532::backlight/brightness
Signed-off-by: Tony Lindgren <tony@atomide.com>
The TFP410 driver was removed but the replacement driver was
never enabled. This patch enableds the DRM_TI_TFP410
Fixes: be3143d8b2 ("drm/omap: Remove TFP410 and DVI connector drivers")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Pull selinux updates from Paul Moore:
- Add LSM hooks, and SELinux access control hooks, for dnotify,
fanotify, and inotify watches. This has been discussed with both the
LSM and fs/notify folks and everybody is good with these new hooks.
- The LSM stacking changes missed a few calls to current_security() in
the SELinux code; we fix those and remove current_security() for
good.
- Improve our network object labeling cache so that we always return
the object's label, even when under memory pressure. Previously we
would return an error if we couldn't allocate a new cache entry, now
we always return the label even if we can't create a new cache entry
for it.
- Convert the sidtab atomic_t counter to a normal u32 with
READ/WRITE_ONCE() and memory barrier protection.
- A few patches to policydb.c to clean things up (remove forward
declarations, long lines, bad variable names, etc)
* tag 'selinux-pr-20190917' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
lsm: remove current_security()
selinux: fix residual uses of current_security() for the SELinux blob
selinux: avoid atomic_t usage in sidtab
fanotify, inotify, dnotify, security: add security hook for fs notifications
selinux: always return a secid from the network caches if we find one
selinux: policydb - rename type_val_to_struct_array
selinux: policydb - fix some checkpatch.pl warnings
selinux: shuffle around policydb.c to get rid of forward declarations
commit 6953c57ab1 "gpio: of: Handle SPI chipselect legacy bindings"
did introduce logic to centrally handle the legacy spi-cs-high property
in combination with cs-gpios. This assumes that the polarity
of the CS has to be inverted if spi-cs-high is missing, even
and especially if non-legacy GPIO_ACTIVE_HIGH is specified.
The DTS for the GTA04 was orginally introduced under the assumption
that there is no need for spi-cs-high if the gpio is defined with
proper polarity GPIO_ACTIVE_HIGH.
This was not a problem until gpiolib changed the interpretation of
GPIO_ACTIVE_HIGH and missing spi-cs-high.
The effect is that the missing spi-cs-high is now interpreted as CS being
low (despite GPIO_ACTIVE_HIGH) which turns off the SPI interface when the
panel is to be programmed by the panel driver.
Therefore, we have to add the redundant and legacy spi-cs-high property
to properly activate CS.
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The ahclkr clkctrl clock bit 28 only exists for mcasp 1 and 2 on dra7.
This causes the following warning on beagle-x15:
ti-sysc 48468000.target-module: could not add child clock ahclkr: -19
Also the mcasp clkctrl clock bits are wrong:
For mcasp1 and 2 we have four clocks at bits 28, 24, 22 and 0:
bit 28 is ahclkr
bit 24 is ahclkx
bit 22 is auxclk
bit 0 is fck
For mcasp3 to 8 we have three clocks at bits 24, 22 and 0.
bit 24 is ahclkx
bit 22 is auxclk
bit 0 is fck
We do not have currently mapped auxclk at bit 22 for the drivers, that can
be added if needed.
Fixes: 5241ccbf28 ("ARM: dts: Add missing ranges for dra7 mcasp l3 ports")
Cc: Suman Anna <s-anna@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Make sure that bsg_queue_rq() calls put_device() if an error is
encountered after get_device() was successful.
Fixes: cd2f076f1d ("bsg: convert to use blk-mq")
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently we just -EINVAL a read or write to an fd that isn't backed
by ->read_iter() or ->write_iter(). But we can handle them just fine,
as long as we punt fo async context first.
Implement a simple loop function for doing ->read() or ->write()
instead, and ensure we call it appropriately.
Reported-by: 李通洲 <carter.li@eoitek.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull crypto fixes froim Herbert Xu:
"This fixes the following issues:
- potential boot hang in hwrng
- missing switch/break in talitos
- bugs and warnings in hisilicon
- build warning in inside-secure"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: hisilicon - avoid unused function warning
hwrng: core - don't wait on add_early_randomness()
crypto: hisilicon - Fix return value check in hisi_zip_acompress()
crypto: hisilicon - Matching the dma address for dma_pool_free()
crypto: hisilicon - Fix double free in sec_free_hw_sgl()
crypto: inside-secure - Fix unused variable warning when CONFIG_PCI=n
crypto: talitos - fix missing break in switch statement
Fix sparse warning:
fs/nfsd/nfssvc.c:364:6: warning:
symbol 'nfsd_reset_boot_verifier_locked' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Both test_smoke.sh and test_space.sh require tpm2.py and tpm2_test.py.
Rework so that tpm2.py and tpm2_test.py gets installed, added them to
the variable TEST_PROGS_EXTENDED.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When generating config with 'make defconfig kselftest-merge' fragment
CONFIG_TEST_LIVEPATCH=m isn't set.
Rework to enable CONFIG_LIVEPATCH and CONFIG_DYNAMIC_DEBUG as well.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Some systems have multiple watchdog devices where the first device
registered is assigned to the /dev/watchdog device file. In order
to test other watchdog devices, add an optional file argument for
selecting non-default watchdog devices for testing.
Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: George G. Davis <george_davis@mentor.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The seccomp selftest goes to some length to build against older kernel
headers, viz. all the #ifdefs at the beginning of the file.
Commit 201766a20e ("ptrace: add PTRACE_GET_SYSCALL_INFO request")
introduces some additional macros, but doesn't do the #ifdef dance.
Let's add that dance here to avoid:
gcc -Wl,-no-as-needed -Wall seccomp_bpf.c -lpthread -o seccomp_bpf
In file included from seccomp_bpf.c:51:
seccomp_bpf.c: In function ‘tracer_ptrace’:
seccomp_bpf.c:1787:20: error: ‘PTRACE_EVENTMSG_SYSCALL_ENTRY’ undeclared (first use in this function); did you mean ‘PTRACE_EVENT_CLONE’?
EXPECT_EQ(entry ? PTRACE_EVENTMSG_SYSCALL_ENTRY
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../kselftest_harness.h:608:13: note: in definition of macro ‘__EXPECT’
__typeof__(_expected) __exp = (_expected); \
^~~~~~~~~
seccomp_bpf.c:1787:2: note: in expansion of macro ‘EXPECT_EQ’
EXPECT_EQ(entry ? PTRACE_EVENTMSG_SYSCALL_ENTRY
^~~~~~~~~
seccomp_bpf.c:1787:20: note: each undeclared identifier is reported only once for each function it appears in
EXPECT_EQ(entry ? PTRACE_EVENTMSG_SYSCALL_ENTRY
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../kselftest_harness.h:608:13: note: in definition of macro ‘__EXPECT’
__typeof__(_expected) __exp = (_expected); \
^~~~~~~~~
seccomp_bpf.c:1787:2: note: in expansion of macro ‘EXPECT_EQ’
EXPECT_EQ(entry ? PTRACE_EVENTMSG_SYSCALL_ENTRY
^~~~~~~~~
seccomp_bpf.c:1788:6: error: ‘PTRACE_EVENTMSG_SYSCALL_EXIT’ undeclared (first use in this function); did you mean ‘PTRACE_EVENT_EXIT’?
: PTRACE_EVENTMSG_SYSCALL_EXIT, msg);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
../kselftest_harness.h:608:13: note: in definition of macro ‘__EXPECT’
__typeof__(_expected) __exp = (_expected); \
^~~~~~~~~
seccomp_bpf.c:1787:2: note: in expansion of macro ‘EXPECT_EQ’
EXPECT_EQ(entry ? PTRACE_EVENTMSG_SYSCALL_ENTRY
^~~~~~~~~
make: *** [Makefile:12: seccomp_bpf] Error 1
[skhan@linuxfoundation.org: Fix checkpatch error in commit log]
Signed-off-by: Tycho Andersen <tycho@tycho.ws>
Fixes: 201766a20e ("ptrace: add PTRACE_GET_SYSCALL_INFO request")
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Before:
[acme@quaco ~]$ perf record -b -e cycles date
WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted,
check /proc/sys/kernel/kptr_restrict and /proc/sys/kernel/perf_event_paranoid.
Samples in kernel functions may not be resolved if a suitable vmlinux
file is not found in the buildid cache or in the vmlinux path.
Samples in kernel modules won't be resolved at all.
If some relocation was applied (e.g. kexec) symbols may be misresolved
even with a suitable vmlinux or kallsyms file.
Mon 23 Sep 2019 11:00:59 AM -03
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.005 MB perf.data (14 samples) ]
[acme@quaco ~]$
But we did a fallback and exclude_kernel was set, so no need for
resolving kernel symbols:
$ perf evlist -v
cycles:u: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD|BRANCH_STACK, read_format: ID, disabled: 1, inherit: 1, exclude_kernel: 1, exclude_hv: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1, branch_sample_type: ANY
$
After:
[acme@quaco ~]$ perf record -b -e cycles date
Mon 23 Sep 2019 11:07:18 AM -03
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.007 MB perf.data (16 samples) ]
[acme@quaco ~]$ perf evlist -v
cycles:u: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD|BRANCH_STACK, read_format: ID, disabled: 1, inherit: 1, exclude_kernel: 1, exclude_hv: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1, branch_sample_type: ANY
[acme@quaco ~]$
No needless warning is emitted.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lkml.kernel.org/n/tip-5yqnr8xcqwhr15xktj2097ac@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
