Commit "i2c: cadence: Add standard bus recovery support" breaks for i2c
devices that have no pinctrl defined. There is no requirement for this
to exist in the DT. This has worked perfectly well without this before in
at least 1 real usage case on hardware (Mali Komeda DPU, Cadence i2c to
talk to a tda99xx phy). Adding the requirement to have pinctrl set up in
the device tree (or otherwise be found) is a regression where the whole
i2c device is lost entirely (in this case dropping entire devices which
then leads to the drm display stack unable to find the phy for display
output, thus having no drm display device and so on down the chain).
This converts the above commit to an enhancement if pinctrl can be found
for the i2c device, providing a timeout on read with recovery, but if not,
do what used to be done rather than a fatal loss of a device.
This restores the mentioned display devices to their working state again.
Fixes: 58b924241d ("i2c: cadence: Add standard bus recovery support")
Signed-off-by: Carsten Haitzler <carsten.haitzler@arm.com>
Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Reviewed-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Acked-by: Michal Simek <michal.simek@amd.com>
[wsa: added braces to else-branch]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The config to be able to inject error codes into any function annotated
with ALLOW_ERROR_INJECTION() is enabled when FUNCTION_ERROR_INJECTION is
enabled. But unfortunately, this is always enabled on x86 when KPROBES
is enabled, and there's no way to turn it off.
As kprobes is useful for observability of the kernel, it is useful to
have it enabled in production environments. But error injection should
be avoided. Add a prompt to the config to allow it to be disabled even
when kprobes is enabled, and get rid of the "def_bool y".
This is a kernel debug feature (it's in Kconfig.debug), and should have
never been something enabled by default.
Cc: stable@vger.kernel.org
Fixes: 540adea380 ("error-injection: Separate error-injection from kprobe")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This fixes a concrete bug but is also the basis for some cleanup work,
so I'm merging it based on the offending commit in order to minimize
future conflicts.
* commit '7e1864332fbc1b993659eab7974da9fe8bf8c128':
riscv: fix race when vmap stack overflow
Pull EFI fix from Ard Biesheuvel:
"A single revert for some code that I added during this cycle. The code
is not wrong, but it should be a bit more careful about how to handle
the shadow call stack pointer, so it is better to revert it for now
and bring it back later in improved form.
Summary:
- Revert runtime service sync exception recovery on arm64"
* tag 'efi-fixes-for-v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
arm64: efi: Revert "Recover from synchronous exceptions ..."
As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put(). So call it after using to avoid refcount leak.
Fixes: 14513ee696 ("hwmon: (coretemp) Use PCI host bridge ID to identify CPU if necessary")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221118093303.214163-1-yangyingliang@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This reverts commit 23715a26c8, which introduced some code in
assembler that manipulates both the ordinary and the shadow call stack
pointer in a way that could potentially be taken advantage of. So let's
revert it, and do a better job the next time around.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
This reverts commit 232ccac1bd.
On the subject of suspend, the RISC-V SBI spec states:
This does not cover whether any given events actually reach the hart or
not, just what the hart will do if it receives an event. On PolarFire
SoC, and potentially other SiFive based implementations, events from the
RISC-V timer do reach a hart during suspend. This is not the case for the
implementation on the Allwinner D1 - there timer events are not received
during suspend.
To fix this, the CLOCK_EVT_FEAT_C3STOP (mis)feature was enabled for the
timer driver - but this has broken both RCU stall detection and timers
generally on PolarFire SoC and potentially other SiFive based
implementations.
If an AXI read to the PCIe controller on PolarFire SoC times out, the
system will stall, however, with CLOCK_EVT_FEAT_C3STOP active, the system
just locks up without RCU stalling:
io scheduler mq-deadline registered
io scheduler kyber registered
microchip-pcie 2000000000.pcie: host bridge /soc/pcie@2000000000 ranges:
microchip-pcie 2000000000.pcie: MEM 0x2008000000..0x2087ffffff -> 0x0008000000
microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer
microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer
microchip-pcie 2000000000.pcie: axi read request error
microchip-pcie 2000000000.pcie: axi read timeout
microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer
microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer
microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer
microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer
microchip-pcie 2000000000.pcie: sec error in pcie2axi buffer
microchip-pcie 2000000000.pcie: ded error in pcie2axi buffer
Freeing initrd memory: 7332K
Similarly issues were reported with clock_nanosleep() - with a test app
that sleeps each cpu for 6, 5, 4, 3 ms respectively, HZ=250 & the blamed
commit in place, the sleep times are rounded up to the next jiffy:
== CPU: 1 == == CPU: 2 == == CPU: 3 == == CPU: 4 ==
Mean: 7.974992 Mean: 7.976534 Mean: 7.962591 Mean: 3.952179
Std Dev: 0.154374 Std Dev: 0.156082 Std Dev: 0.171018 Std Dev: 0.076193
Hi: 9.472000 Hi: 10.495000 Hi: 8.864000 Hi: 4.736000
Lo: 6.087000 Lo: 6.380000 Lo: 4.872000 Lo: 3.403000
Samples: 521 Samples: 521 Samples: 521 Samples: 521
Fortunately, the D1 has a second timer, which is "currently used in
preference to the RISC-V/SBI timer driver" so a revert here does not
hurt operation of D1 in its current form.
Ultimately, a DeviceTree property (or node) will be added to encode the
behaviour of the timers, but until then revert the addition of
CLOCK_EVT_FEAT_C3STOP.
Fixes: 232ccac1bd ("clocksource/drivers/riscv: Events are stopped during CPU suspend")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Samuel Holland <samuel@sholland.org>
Link: https://lore.kernel.org/linux-riscv/YzYTNQRxLr7Q9JR0@spud/
Link: https://github.com/riscv-non-isa/riscv-sbi-doc/issues/98/
Link: https://lore.kernel.org/linux-riscv/bf6d3b1f-f703-4a25-833e-972a44a04114@sholland.org/
Link: https://lore.kernel.org/r/20221122121620.3522431-1-conor.dooley@microchip.com
Pull clk fixes from Stephen Boyd:
"A set of clk driver fixes that resolve issues for various SoCs.
Most of these are incorrect clk data, like bad parent descriptions.
When the clk tree is improperly described things don't work, like USB
and UFS controllers, because clk frequencies are wonky. Here are the
extra details:
- Fix the parent of UFS reference clks on Qualcomm SC8280XP so that
UFS works properly
- Fix the clk ID for USB on AT91 RM9200 so the USB driver continues
to probe
- Stop using of_device_get_match_data() on the wrong device for a
Samsung Exynos driver so it gets the proper clk data
- Fix ExynosAutov9 binding
- Fix the parent of the div4 clk on Exynos7885
- Stop calling runtime PM APIs from the Qualcomm GDSC driver directly
as it leads to a lockdep splat and is just plain wrong because it
violates runtime PM semantics by calling runtime PM APIs when the
device has been runtime PM disabled"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: gcc-sc8280xp: add cxo as parent for three ufs ref clks
ARM: at91: rm9200: fix usb device clock id
clk: samsung: Revert "clk: samsung: exynos-clkout: Use of_device_get_match_data()"
dt-bindings: clock: exynosautov9: fix reference to CMU_FSYS1
clk: qcom: gdsc: Remove direct runtime PM calls
clk: samsung: exynos7885: Correct "div4" clock parents
It causes build failures with unusual CC/HOSTCC combinations.
Quoting
https://lkml.kernel.org/r/A222B1E6-69B8-4085-AD1B-27BDB72CA971@goldelico.com:
HOSTCC scripts/mod/modpost.o - due to target missing
In file included from include/linux/string.h:5,
from scripts/mod/../../include/linux/license.h:5,
from scripts/mod/modpost.c:24:
include/linux/compiler.h:246:10: fatal error: asm/rwonce.h: No such file or directory
246 | #include <asm/rwonce.h>
| ^~~~~~~~~~~~~~
compilation terminated.
...
The problem is that HOSTCC is not necessarily the same compiler or even
architecture as CC and pulling in <linux/compiler.h> or <asm/rwonce.h>
files indirectly isn't a good idea then.
My toolchain is providing HOSTCC = gcc (MacPorts) and CC = arm-linux-gnueabihf
(built from gcc source) and all running on Darwin.
If I change the include to <string.h> I can then "HOSTCC scripts/mod/modpost.c"
but then it fails for "CC kernel/module/main.c" not finding <string.h>:
CC kernel/module/main.o - due to target missing
In file included from kernel/module/main.c:43:0:
./include/linux/license.h:5:20: fatal error: string.h: No such file or directory
#include <string.h>
^
compilation terminated.
Reported-by: "H. Nikolaus Schaller" <hns@goldelico.com>
Cc: Sam James <sam@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
pagetable walks on address ranges mapped by VMAs can be done under the
mmap lock, the lock of an anon_vma attached to the VMA, or the lock of the
VMA's address_space. Only one of these needs to be held, and it does not
need to be held in exclusive mode.
Under those circumstances, the rules for concurrent access to page table
entries are:
- Terminal page table entries (entries that don't point to another page
table) can be arbitrarily changed under the page table lock, with the
exception that they always need to be consistent for
hardware page table walks and lockless_pages_from_mm().
This includes that they can be changed into non-terminal entries.
- Non-terminal page table entries (which point to another page table)
can not be modified; readers are allowed to READ_ONCE() an entry, verify
that it is non-terminal, and then assume that its value will stay as-is.
Retracting a page table involves modifying a non-terminal entry, so
page-table-level locks are insufficient to protect against concurrent page
table traversal; it requires taking all the higher-level locks under which
it is possible to start a page walk in the relevant range in exclusive
mode.
The collapse_huge_page() path for anonymous THP already follows this rule,
but the shmem/file THP path was getting it wrong, making it possible for
concurrent rmap-based operations to cause corruption.
Link: https://lkml.kernel.org/r/20221129154730.2274278-1-jannh@google.com
Link: https://lkml.kernel.org/r/20221128180252.1684965-1-jannh@google.com
Link: https://lkml.kernel.org/r/20221125213714.4115729-1-jannh@google.com
Fixes: 27e1f82731 ("khugepaged: enable collapse pmd for pte-mapped THP")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The issue is reported when removing memory through virtio_mem device. The
transparent huge page, experienced copy-on-write fault, is wrongly
regarded as pinned. The transparent huge page is escaped from being
isolated in isolate_migratepages_block(). The transparent huge page can't
be migrated and the corresponding memory block can't be put into offline
state.
Fix it by replacing page_mapcount() with total_mapcount(). With this, the
transparent huge page can be isolated and migrated, and the memory block
can be put into offline state. Besides, The page's refcount is increased
a bit earlier to avoid the page is released when the check is executed.
Link: https://lkml.kernel.org/r/20221124095523.31061-1-gshan@redhat.com
Fixes: 1da2f328fa ("mm,thp,compaction,cma: allow THP migration for CMA allocations")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reported-by: Zhenyu Zhang <zhenyzha@redhat.com>
Tested-by: Zhenyu Zhang <zhenyzha@redhat.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org> [5.7+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When running as a Xen PV guests commit eed9a328aa ("mm: x86: add
CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG") can cause a protection violation in
pmdp_test_and_clear_young():
BUG: unable to handle page fault for address: ffff8880083374d0
#PF: supervisor write access in kernel mode
#PF: error_code(0x0003) - permissions violation
PGD 3026067 P4D 3026067 PUD 3027067 PMD 7fee5067 PTE 8010000008337065
Oops: 0003 [#1] PREEMPT SMP NOPTI
CPU: 7 PID: 158 Comm: kswapd0 Not tainted 6.1.0-rc5-20221118-doflr+ #1
RIP: e030:pmdp_test_and_clear_young+0x25/0x40
This happens because the Xen hypervisor can't emulate direct writes to
page table entries other than PTEs.
This can easily be fixed by introducing arch_has_hw_nonleaf_pmd_young()
similar to arch_has_hw_pte_young() and test that instead of
CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG.
Link: https://lkml.kernel.org/r/20221123064510.16225-1-jgross@suse.com
Fixes: eed9a328aa ("mm: x86: add CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Acked-by: Yu Zhao <yuzhao@google.com>
Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Acked-by: David Hildenbrand <david@redhat.com> [core changes]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit da87878010 ("mm/damon/sysfs: support online inputs update") made
'damon_sysfs_set_schemes()' to be called for running DAMON context, which
could have schemes. In the case, DAMON sysfs interface is supposed to
update, remove, or add schemes to reflect the sysfs files. However, the
code is assuming the DAMON context wouldn't have schemes at all, and
therefore creates and adds new schemes. As a result, the code doesn't
work as intended for online schemes tuning and could have more than
expected memory footprint. The schemes are all in the DAMON context, so
it doesn't leak the memory, though.
Remove the wrong asssumption (the DAMON context wouldn't have schemes) in
'damon_sysfs_set_schemes()' to fix the bug.
Link: https://lkml.kernel.org/r/20221122194831.3472-1-sj@kernel.org
Fixes: da87878010 ("mm/damon/sysfs: support online inputs update")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Syzbot reported a null-ptr-deref bug:
NILFS (loop0): segctord starting. Construction interval = 5 seconds, CP
frequency < 30 seconds
general protection fault, probably for non-canonical address
0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
CPU: 1 PID: 3603 Comm: segctord Not tainted
6.1.0-rc2-syzkaller-00105-gb229b6ca5abb #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google
10/11/2022
RIP: 0010:nilfs_palloc_commit_free_entry+0xe5/0x6b0
fs/nilfs2/alloc.c:608
Code: 00 00 00 00 fc ff df 80 3c 02 00 0f 85 cd 05 00 00 48 b8 00 00 00
00 00 fc ff df 4c 8b 73 08 49 8d 7e 10 48 89 fa 48 c1 ea 03 <80> 3c 02
00 0f 85 26 05 00 00 49 8b 46 10 be a6 00 00 00 48 c7 c7
RSP: 0018:ffffc90003dff830 EFLAGS: 00010212
RAX: dffffc0000000000 RBX: ffff88802594e218 RCX: 000000000000000d
RDX: 0000000000000002 RSI: 0000000000002000 RDI: 0000000000000010
RBP: ffff888071880222 R08: 0000000000000005 R09: 000000000000003f
R10: 000000000000000d R11: 0000000000000000 R12: ffff888071880158
R13: ffff88802594e220 R14: 0000000000000000 R15: 0000000000000004
FS: 0000000000000000(0000) GS:ffff8880b9b00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fb1c08316a8 CR3: 0000000018560000 CR4: 0000000000350ee0
Call Trace:
<TASK>
nilfs_dat_commit_free fs/nilfs2/dat.c:114 [inline]
nilfs_dat_commit_end+0x464/0x5f0 fs/nilfs2/dat.c:193
nilfs_dat_commit_update+0x26/0x40 fs/nilfs2/dat.c:236
nilfs_btree_commit_update_v+0x87/0x4a0 fs/nilfs2/btree.c:1940
nilfs_btree_commit_propagate_v fs/nilfs2/btree.c:2016 [inline]
nilfs_btree_propagate_v fs/nilfs2/btree.c:2046 [inline]
nilfs_btree_propagate+0xa00/0xd60 fs/nilfs2/btree.c:2088
nilfs_bmap_propagate+0x73/0x170 fs/nilfs2/bmap.c:337
nilfs_collect_file_data+0x45/0xd0 fs/nilfs2/segment.c:568
nilfs_segctor_apply_buffers+0x14a/0x470 fs/nilfs2/segment.c:1018
nilfs_segctor_scan_file+0x3f4/0x6f0 fs/nilfs2/segment.c:1067
nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1197 [inline]
nilfs_segctor_collect fs/nilfs2/segment.c:1503 [inline]
nilfs_segctor_do_construct+0x12fc/0x6af0 fs/nilfs2/segment.c:2045
nilfs_segctor_construct+0x8e3/0xb30 fs/nilfs2/segment.c:2379
nilfs_segctor_thread_construct fs/nilfs2/segment.c:2487 [inline]
nilfs_segctor_thread+0x3c3/0xf30 fs/nilfs2/segment.c:2570
kthread+0x2e4/0x3a0 kernel/kthread.c:376
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
</TASK>
...
If DAT metadata file is corrupted on disk, there is a case where
req->pr_desc_bh is NULL and blocknr is 0 at nilfs_dat_commit_end() during
a b-tree operation that cascadingly updates ancestor nodes of the b-tree,
because nilfs_dat_commit_alloc() for a lower level block can initialize
the blocknr on the same DAT entry between nilfs_dat_prepare_end() and
nilfs_dat_commit_end().
If this happens, nilfs_dat_commit_end() calls nilfs_dat_commit_free()
without valid buffer heads in req->pr_desc_bh and req->pr_bitmap_bh, and
causes the NULL pointer dereference above in
nilfs_palloc_commit_free_entry() function, which leads to a crash.
Fix this by adding a NULL check on req->pr_desc_bh and req->pr_bitmap_bh
before nilfs_palloc_commit_free_entry() in nilfs_dat_commit_free().
This also calls nilfs_error() in that case to notify that there is a fatal
flaw in the filesystem metadata and prevent further operations.
Link: https://lkml.kernel.org/r/00000000000097c20205ebaea3d6@google.com
Link: https://lkml.kernel.org/r/20221114040441.1649940-1-zhangpeng362@huawei.com
Link: https://lkml.kernel.org/r/20221119120542.17204-1-konishi.ryusuke@gmail.com
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+ebe05ee8e98f755f61d0@syzkaller.appspotmail.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
madvise(MADV_DONTNEED) ends up calling zap_page_range() to clear page
tables associated with the address range. For hugetlb vmas,
zap_page_range will call __unmap_hugepage_range_final. However,
__unmap_hugepage_range_final assumes the passed vma is about to be removed
and deletes the vma_lock to prevent pmd sharing as the vma is on the way
out. In the case of madvise(MADV_DONTNEED) the vma remains, but the
missing vma_lock prevents pmd sharing and could potentially lead to issues
with truncation/fault races.
This issue was originally reported here [1] as a BUG triggered in
page_try_dup_anon_rmap. Prior to the introduction of the hugetlb
vma_lock, __unmap_hugepage_range_final cleared the VM_MAYSHARE flag to
prevent pmd sharing. Subsequent faults on this vma were confused as
VM_MAYSHARE indicates a sharable vma, but was not set so page_mapping was
not set in new pages added to the page table. This resulted in pages that
appeared anonymous in a VM_SHARED vma and triggered the BUG.
Address issue by adding a new zap flag ZAP_FLAG_UNMAP to indicate an unmap
call from unmap_vmas(). This is used to indicate the 'final' unmapping of
a hugetlb vma. When called via MADV_DONTNEED, this flag is not set and
the vm_lock is not deleted.
[1] https://lore.kernel.org/lkml/CAO4mrfdLMXsao9RF4fUE8-Wfde8xmjsKrTNMNC9wjUb6JudD0g@mail.gmail.com/
Link: https://lkml.kernel.org/r/20221114235507.294320-3-mike.kravetz@oracle.com
Fixes: 90e7e7f5ef ("mm: enable MADV_DONTNEED for hugetlb mappings")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: Wei Chen <harperchen1110@gmail.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Syzbot reported the below splat:
WARNING: CPU: 1 PID: 3646 at include/linux/gfp.h:221 __alloc_pages_node
include/linux/gfp.h:221 [inline]
WARNING: CPU: 1 PID: 3646 at include/linux/gfp.h:221
hpage_collapse_alloc_page mm/khugepaged.c:807 [inline]
WARNING: CPU: 1 PID: 3646 at include/linux/gfp.h:221
alloc_charge_hpage+0x802/0xaa0 mm/khugepaged.c:963
Modules linked in:
CPU: 1 PID: 3646 Comm: syz-executor210 Not tainted
6.1.0-rc1-syzkaller-00454-ga70385240892 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 10/11/2022
RIP: 0010:__alloc_pages_node include/linux/gfp.h:221 [inline]
RIP: 0010:hpage_collapse_alloc_page mm/khugepaged.c:807 [inline]
RIP: 0010:alloc_charge_hpage+0x802/0xaa0 mm/khugepaged.c:963
Code: e5 01 4c 89 ee e8 6e f9 ae ff 4d 85 ed 0f 84 28 fc ff ff e8 70 fc
ae ff 48 8d 6b ff 4c 8d 63 07 e9 16 fc ff ff e8 5e fc ae ff <0f> 0b e9
96 fa ff ff 41 bc 1a 00 00 00 e9 86 fd ff ff e8 47 fc ae
RSP: 0018:ffffc90003fdf7d8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff888077f457c0 RSI: ffffffff81cd8f42 RDI: 0000000000000001
RBP: ffff888079388c0c R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: dffffc0000000000 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f6b48ccf700(0000) GS:ffff8880b9b00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f6b48a819f0 CR3: 00000000171e7000 CR4: 00000000003506e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
collapse_file+0x1ca/0x5780 mm/khugepaged.c:1715
hpage_collapse_scan_file+0xd6c/0x17a0 mm/khugepaged.c:2156
madvise_collapse+0x53a/0xb40 mm/khugepaged.c:2611
madvise_vma_behavior+0xd0a/0x1cc0 mm/madvise.c:1066
madvise_walk_vmas+0x1c7/0x2b0 mm/madvise.c:1240
do_madvise.part.0+0x24a/0x340 mm/madvise.c:1419
do_madvise mm/madvise.c:1432 [inline]
__do_sys_madvise mm/madvise.c:1432 [inline]
__se_sys_madvise mm/madvise.c:1430 [inline]
__x64_sys_madvise+0x113/0x150 mm/madvise.c:1430
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f6b48a4eef9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 b1 15 00 00 90 48 89 f8 48 89
f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f6b48ccf318 EFLAGS: 00000246 ORIG_RAX: 000000000000001c
RAX: ffffffffffffffda RBX: 00007f6b48af0048 RCX: 00007f6b48a4eef9
RDX: 0000000000000019 RSI: 0000000000600003 RDI: 0000000020000000
RBP: 00007f6b48af0040 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6b48aa53a4
R13: 00007f6b48bffcbf R14: 00007f6b48ccf400 R15: 0000000000022000
</TASK>
It is because khugepaged allocates pages with __GFP_THISNODE, but the
preferred node is bogus. The previous patch fixed the khugepaged code to
avoid allocating page from non-existing node. But it is still racy
against memory hotremove. There is no synchronization with the memory
hotplug so it is possible that memory gets offline during a longer taking
scanning.
So this warning still seems not quite helpful because:
* There is no guarantee the node is online for __GFP_THISNODE context
for all the callsites.
* Kernel just fails the allocation regardless the warning, and it looks
all callsites handle the allocation failure gracefully.
Although while the warning has helped to identify a buggy code, it is not
safe in general and this warning could panic the system with panic-on-warn
configuration which tends to be used surprisingly often. So replace
VM_WARN_ON to pr_warn(). And the warning will be triggered if
__GFP_NOWARN is set since the allocator would print out warning for such
case if __GFP_NOWARN is not set.
[shy828301@gmail.com: rename nid to this_node and gfp to warn_gfp]
Link: https://lkml.kernel.org/r/20221123193014.153983-1-shy828301@gmail.com
[akpm@linux-foundation.org: fix whitespace]
[akpm@linux-foundation.org: print gfp_mask instead of warn_gfp, per Michel]
Link: https://lkml.kernel.org/r/20221108184357.55614-3-shy828301@gmail.com
Fixes: 7d8faaf155 ("mm/madvise: introduce MADV_COLLAPSE sync hugepage collapse")
Signed-off-by: Yang Shi <shy828301@gmail.com>
Reported-by: <syzbot+0044b22d177870ee974f@syzkaller.appspotmail.com>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Zach O'Keefe <zokeefe@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In case of Gen12 video and compute engines, TLB_INV registers are masked -
to modify one bit, corresponding bit in upper half of the register must
be enabled, otherwise nothing happens.
CVE: CVE-2022-4139
Suggested-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 7938d61591 ("drm/i915: Flush TLBs before releasing backing store")
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ASoC: Fixes for v6.1
Some more fixes for v6.1, some of these are very old and were originally
intended to get sent for v5.18 but got lost in the shuffle when there
was an issue with Linus not liking my branching strategy and I rebuilt
bits of my workflow. The ops changes have been validated by people
looking at real hardware and are how things getting dropped got noticed.
For Lexicon I-ONIX FW810S, the call of ioctl(2) with
SNDRV_PCM_IOCTL_HW_PARAMS can returns -ETIMEDOUT. This is a regression due
to the commit 41319eb56e ("ALSA: dice: wait just for
NOTIFY_CLOCK_ACCEPTED after GLOBAL_CLOCK_SELECT operation"). The device
does not emit NOTIFY_CLOCK_ACCEPTED notification when accepting
GLOBAL_CLOCK_SELECT operation with the same parameters as current ones.
This commit fixes the regression. When receiving no notification, return
-ETIMEDOUT as long as operating for any change.
Fixes: 41319eb56e ("ALSA: dice: wait just for NOTIFY_CLOCK_ACCEPTED after GLOBAL_CLOCK_SELECT operation")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20221130130604.29774-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If the prp2 field is not filled in nvme_setup_prp_simple(), the prp2
field is garbage data. According to nvme spec, the prp2 is reserved if
the data transfer does not cross a memory page boundary, so clear it to
zero if it is not used.
Signed-off-by: Lei Rao <lei.rao@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
64-bit RISC-V kernels have the kernel image mapped separately to alias
the linear map. The linear map and the kernel image map are documented
as "direct mapping" and "kernel" respectively in [1].
At image load time, the linear map corresponding to the kernel image
is set to PAGE_READ permission, and the kernel image map is set to
PAGE_READ|PAGE_EXEC.
When the initmem is freed, the pages in the linear map should be
restored to PAGE_READ|PAGE_WRITE, whereas the corresponding pages in
the kernel image map should be restored to PAGE_READ, by removing the
PAGE_EXEC permission.
This is not the case. For 64-bit kernels, only the linear map is
restored to its proper page permissions at initmem free, and not the
kernel image map.
In practise this results in that the kernel can potentially jump to
dead __init code, and start executing invalid instructions, without
getting an exception.
Restore the freed initmem properly, by setting both the kernel image
map to the correct permissions.
[1] Documentation/riscv/vm-layout.rst
Fixes: e5c35fa040 ("riscv: Map the kernel with correct permissions the first time")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alex@ghiti.fr>
Tested-by: Alexandre Ghiti <alex@ghiti.fr>
Link: https://lore.kernel.org/r/20221115090641.258476-1-bjorn@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
lkp reported a build error, I tried the config and can reproduce
build error as below:
VDSOLD arch/riscv/kernel/vdso/vdso.so.dbg
ld.lld: error: section .note file range overlaps with .text
>>> .note range is [0x7C8, 0x803]
>>> .text range is [0x800, 0x1993]
ld.lld: error: section .text file range overlaps with .dynamic
>>> .text range is [0x800, 0x1993]
>>> .dynamic range is [0x808, 0x937]
ld.lld: error: section .note virtual address range overlaps with .text
>>> .note range is [0x7C8, 0x803]
>>> .text range is [0x800, 0x1993]
Fix it by setting DISABLE_BRANCH_PROFILING which will disable branch
tracing for vdso, thus avoid useless _ftrace_annotated_branch section
and _ftrace_branch section. Although we can also fix it by removing
the hardcoded .text begin address, but I think that's another story
and should be put into another patch.
Link: https://lore.kernel.org/lkml/202210122123.Cc4FPShJ-lkp@intel.com/#r
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20221102170254.1925-1-jszhang@kernel.org
Fixes: ad5d1122b8 ("riscv: use vDSO common flow to reduce the latency of the time-related functions")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently, when detecting vmap stack overflow, riscv firstly switches
to the so called shadow stack, then use this shadow stack to call the
get_overflow_stack() to get the overflow stack. However, there's
a race here if two or more harts use the same shadow stack at the same
time.
To solve this race, we introduce spin_shadow_stack atomic var, which
will be swap between its own address and 0 in atomic way, when the
var is set, it means the shadow_stack is being used; when the var
is cleared, it means the shadow_stack isn't being used.
Fixes: 31da94c25a ("riscv: add VMAP_STACK overflow detection")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Suggested-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20221030124517.2370-1-jszhang@kernel.org
[Palmer: Add AQ to the swap, and also some comments.]
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, can and wifi.
Current release - new code bugs:
- eth: mlx5e:
- use kvfree() in mlx5e_accel_fs_tcp_create()
- MACsec, fix RX data path 16 RX security channel limit
- MACsec, fix memory leak when MACsec device is deleted
- MACsec, fix update Rx secure channel active field
- MACsec, fix add Rx security association (SA) rule memory leak
Previous releases - regressions:
- wifi: cfg80211: don't allow multi-BSSID in S1G
- stmmac: set MAC's flow control register to reflect current settings
- eth: mlx5:
- E-switch, fix duplicate lag creation
- fix use-after-free when reverting termination table
Previous releases - always broken:
- ipv4: fix route deletion when nexthop info is not specified
- bpf: fix a local storage BPF map bug where the value's spin lock
field can get initialized incorrectly
- tipc: re-fetch skb cb after tipc_msg_validate
- wifi: wilc1000: fix Information Element parsing
- packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE
- sctp: fix memory leak in sctp_stream_outq_migrate()
- can: can327: fix potential skb leak when netdev is down
- can: add number of missing netdev freeing on error paths
- aquantia: do not purge addresses when setting the number of rings
- wwan: iosm:
- fix incorrect skb length leading to truncated packet
- fix crash in peek throughput test due to skb UAF"
* tag 'net-6.1-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits)
net: ethernet: renesas: ravb: Fix promiscuous mode after system resumed
MAINTAINERS: Update maintainer list for chelsio drivers
ionic: update MAINTAINERS entry
sctp: fix memory leak in sctp_stream_outq_migrate()
packet: do not set TP_STATUS_CSUM_VALID on CHECKSUM_COMPLETE
net/mlx5: Lag, Fix for loop when checking lag
Revert "net/mlx5e: MACsec, remove replay window size limitation in offload path"
net: marvell: prestera: Fix a NULL vs IS_ERR() check in some functions
net: tun: Fix use-after-free in tun_detach()
net: mdiobus: fix unbalanced node reference count
net: hsr: Fix potential use-after-free
tipc: re-fetch skb cb after tipc_msg_validate
mptcp: fix sleep in atomic at close time
mptcp: don't orphan ssk in mptcp_close()
dsa: lan9303: Correct stat name
ipv4: Fix route deletion when nexthop info is not specified
net: wwan: iosm: fix incorrect skb length
net: wwan: iosm: fix crash in peek throughput test
net: wwan: iosm: fix dma_alloc_coherent incompatible pointer type
net: wwan: iosm: fix kernel test robot reported error
...
Per syzbot it is possible for perf_pending_task() to run after the
event is free()'d. There are two related but distinct cases:
- the task_work was already queued before destroying the event;
- destroying the event itself queues the task_work.
The first cannot be solved using task_work_cancel() since
perf_release() itself might be called from a task_work (____fput),
which means the current->task_works list is already empty and
task_work_cancel() won't be able to find the perf_pending_task()
entry.
The simplest alternative is extending the perf_event lifetime to cover
the task_work.
The second is just silly, queueing a task_work while you know the
event is going away makes no sense and is easily avoided by
re-arranging how the event is marked STATE_DEAD and ensuring it goes
through STATE_OFF on the way down.
Reported-by: syzbot+9228d6098455bb209ec8@syzkaller.appspotmail.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Marco Elver <elver@google.com>
