For SDIO/USB interface, since the tranferring speed is slower than
that in PCIE, it may have race condition when the driver sets down
H2C command to the FW.
In the function rtw_fw_send_h2c_command, before the patch, box_reg
is written first, then box_ex_reg is written. FW starts to work and
fetch the value of box_ex_reg, when the most significant byte of
box_reg(4 bytes) is written. Meanwhile, for SDIO/USB interface,
since the transferring speed is slow, the driver is still in writing
the new value of box_ex_reg through the bus, and FW may get the
wrong value of box_ex_reg at the moment.
To prevent the above driver/FW racing situation, box_ex_reg is
written first then box_reg. Furthermore, it is written in 4 bytes at
a time, instead of written in one byte one by one. It can increase
the speed for SDIO/USB interface.
Signed-off-by: Ji-Pin Jou <neo_jou@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221124064442.28042-1-pkshih@realtek.com
flow_offload_queue_work() can be called in workqueue without
bh disabled, like the call trace showed in my act_ct testing,
calling NF_FLOW_TABLE_STAT_INC() there would cause a call
trace:
BUG: using __this_cpu_add() in preemptible [00000000] code: kworker/u4:0/138560
caller is flow_offload_queue_work+0xec/0x1b0 [nf_flow_table]
Workqueue: act_ct_workqueue tcf_ct_flow_table_cleanup_work [act_ct]
Call Trace:
<TASK>
dump_stack_lvl+0x33/0x46
check_preemption_disabled+0xc3/0xf0
flow_offload_queue_work+0xec/0x1b0 [nf_flow_table]
nf_flow_table_iterate+0x138/0x170 [nf_flow_table]
nf_flow_table_free+0x140/0x1a0 [nf_flow_table]
tcf_ct_flow_table_cleanup_work+0x2f/0x2b0 [act_ct]
process_one_work+0x6a3/0x1030
worker_thread+0x8a/0xdf0
This patch fixes it by using NF_FLOW_TABLE_STAT_INC_ATOMIC()
instead in flow_offload_queue_work().
Note that for FLOW_CLS_REPLACE branch in flow_offload_queue_work(),
it may not be called in preemptible path, but it's good to use
NF_FLOW_TABLE_STAT_INC_ATOMIC() for all cases in
flow_offload_queue_work().
Fixes: b038177636 ("netfilter: nf_flow_table: count pending offload workqueue tasks")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Embarrassingly, nft_pipapo_insert() checked for interval validity in
the first field only.
The start_p and end_p pointers were reset to key data from the first
field at every iteration of the loop which was supposed to go over
the set fields.
Fixes: 3c4287f620 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Reported-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
skb passed to network layer contains incorrect length.
In mux aggregation protocol, the datagram block received
from device contains block signature, packet & datagram
header. The right skb len to be calculated by subracting
datagram pad len from datagram length.
Whereas in mux lite protocol, the skb contains single
datagram so skb len is calculated by subtracting the
packet offset from datagram header.
Fixes: 1f52d7b622 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peek throughput UL test is resulting in crash. If the UL
transfer block free list is exhaust, the peeked skb is freed.
In the next transfer freed skb is referred from UL list which
results in crash.
Don't free the skb if UL transfer blocks are unavailable. The
pending skb will be picked for transfer on UL transfer block
available.
Fixes: 1f52d7b622 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix build error reported on armhf while preparing 6.1-rc5
for Debian.
iosm_ipc_protocol.c:244:36: error: passing argument 3 of
'dma_alloc_coherent' from incompatible pointer type.
Change phy_ap_shm type from phys_addr_t to dma_addr_t.
Fixes: faed4c6f6f ("net: iosm: shared memory protocol")
Reported-by: Bonaccorso Salvatore <carnil@debian.org>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sparse warnings - iosm_ipc_mux_codec.c:1474 using plain
integer as NULL pointer.
Use skb_trim() to reset skb tail & len.
Fixes: 9413491e20 ("net: iosm: encode or decode datagram")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tim Harvey reports that link modes which he does not expect to be
supported are being advertised, and this is because of the workaround
we have for PHYs that switch interface modes.
Fix this up by checking whether rate matching will be used for the
requested interface mode, and if rate matching will be used, perform
validation only with the requested interface mode, rather than invoking
this workaround.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
In function nixge_hw_dma_bd_release() dereference of NULL pointer
priv->rx_bd_v is possible for the case of its allocation failure in
nixge_hw_dma_bd_init().
Move for() loop with priv->rx_bd_v dereference under the check for
its validity.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 492caffa8a ("net: ethernet: nixge: Add support for National Instruments XGE netdev")
Signed-off-by: Yuri Karpov <YKarpov@ispras.ru>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Both p9_fd_create_tcp() and p9_fd_create_unix() will call
p9_socket_open(). If the creation of p9_trans_fd fails,
p9_fd_create_tcp() and p9_fd_create_unix() will return an
error directly instead of releasing the cscoket, which will
result in a socket leak.
This patch adds sock_release() to fix the leak issue.
Fixes: 6b18662e23 ("9p connect fixes")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
ACKed-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ntb_netdev_init_module() returns the ntb_transport_register_client()
directly without checking its return value, if
ntb_transport_register_client() failed, the NTB client device is not
unregistered.
Fix by unregister NTB client device when ntb_transport_register_client()
failed.
Fixes: 548c237c0a ("net: Add support for NTB virtual ethernet device")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1. Added support to filter packets based on IP fragment.
For IPv4 packets check for ip_flag == 0x20 (more fragment bit set).
For IPv6 packets check for next_header == 0x2c (next_header set to
'fragment header for IPv6')
2. Added configuration support from both "ethtool ntuple" and "tc flower".
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The am65_cpsw_nuss_cleanup_ndev() function calls unregister_netdev()
even if register_netdev() fails, which triggers WARN_ON(1) in
unregister_netdevice_many(). To fix it, make sure that
unregister_netdev() is called only on registered netdev.
Compile tested only.
Fixes: 84b4aa4932 ("net: ethernet: ti: am65-cpsw: add multi port support in mac-only mode")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Saeed Mahameed says:
====================
mlx5-fixes-2022-11-24
This series provides bug fixes to mlx5 driver.
Focusing on error handling and proper memory management in mlx5, in
general and in the newly added macsec module.
I still have few fixes left in my queue and I hope those will be the
last ones for mlx5 for this cycle.
Please pull and let me know if there is any problem.
Happy thanksgiving.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-11-23 (ixgbevf, i40e, fm10k, iavf, e100)
This series contains updates to various Intel drivers.
Shang XiaoJing fixes init module error path stop to resource leaks for
ixgbevf and i40e.
Yuan Can also does the same for fm10k and iavf.
Wang Hai stops freeing of skb as it was causing use after free error for
e100.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is a backtrace report about memory leak detected in
gpiochip_setup_dev():
unreferenced object 0xffff88810b406400 (size 512):
comm "python3", pid 1682, jiffies 4295346908 (age 24.090s)
backtrace:
kmalloc_trace
device_add device_private_init at drivers/base/core.c:3361
(inlined by) device_add at drivers/base/core.c:3411
cdev_device_add
gpiolib_cdev_register
gpiochip_setup_dev
gpiochip_add_data_with_key
gcdev_register() & gcdev_unregister() would call device_add() &
device_del() (no matter CONFIG_GPIO_CDEV is enabled or not) to
register/unregister device.
However, if device_add() succeeds, some resource (like
struct device_private allocated by device_private_init())
is not released by device_del().
Therefore, after device_add() succeeds by gcdev_register(), it
needs to call put_device() to release resource in the error handle
path.
Here we move forward the register of release function, and let it
release every piece of resource by put_device() instead of kfree().
While at it, fix another subtle issue, i.e. when gc->ngpio is equal
to 0, we still call kcalloc() and, in case of further error, kfree()
on the ZERO_PTR pointer, which is not NULL. It's not a bug per se,
but rather waste of the resources and potentially wrong expectation
about contents of the gdev->descs variable.
Fixes: 159f3cd92f ("gpiolib: Defer gpio device setup until after gpiolib initialization")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 6.1-rc7 that resolve some reported
problems:
- cdnsp driver fixes for reported problems
- dwc3 fixes for some small reported problems
- uvc gadget driver fix for reported regression
All of these have been in linux-next with no reported problems"
* tag 'usb-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: cdnsp: fix issue with ZLP - added TD_SIZE = 1
usb: dwc3: gadget: Clear ep descriptor last
usb: dwc3: exynos: Fix remove() function
usb: cdnsp: Fix issue with Clear Feature Halt Endpoint
usb: dwc3: gadget: Disable GUSB2PHYCFG.SUSPHY for End Transfer
usb: gadget: uvc: also use try_format in set_format
Pull char/misc driver fixes from Greg KH:
"Here are some small driver fixes for 6.1-rc7, they include:
- build warning fix for the vdso when using new versions of grep
- iio driver fixes for reported issues
- small nvmem driver fixes
- fpga Kconfig fix
- interconnect dt binding fix
All of these have been in linux-next with no reported issues"
* tag 'char-misc-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
lib/vdso: use "grep -E" instead of "egrep"
nvmem: lan9662-otp: Change return type of lan9662_otp_wait_flag_clear()
nvmem: rmem: Fix return value check in rmem_read()
fpga: m10bmc-sec: Fix kconfig dependencies
dt-bindings: iio: adc: Remove the property "aspeed,trim-data-valid"
iio: adc: aspeed: Remove the trim valid dts property.
iio: core: Fix entry not deleted when iio_register_sw_trigger_type() fails
iio: accel: bma400: Fix memory leak in bma400_get_steps_reg()
iio: light: rpr0521: add missing Kconfig dependencies
iio: health: afe4404: Fix oob read in afe4404_[read|write]_raw
iio: health: afe4403: Fix oob read in afe4403_read_raw
iio: light: apds9960: fix wrong register for gesture gain
dt-bindings: interconnect: qcom,msm8998-bwmon: Correct SC7280 CPU compatible
Pull timer fix from Borislav Petkov:
- Return the proper timer register width (31 bits) for a 32-bit signed
register in order to avoid a timer interrupt storm on ARM XGene-1
hardware running in NO_HZ mode
* tag 'timers_urgent_for_v6.1_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/arm_arch_timer: Fix XGene-1 TVAL register math error
Pull objtool fix from Borislav Petkov:
- Handle different output of readelf on different distros running
ppc64le which confuses faddr2line's function offsets conversion
* tag 'objtool_urgent_for_v6.1_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
scripts/faddr2line: Fix regression in name resolution on ppc64le
Pull x86 fixes from Borislav Petkov:
- ioremap: mask out the bits which are not part of the physical address
*after* the size computation is done to prevent any hypothetical
ioremap failures
- Change the MSR save/restore functionality during suspend to rely on
flags denoting that the related MSRs are actually supported vs
reading them and assuming they are (an Atom one allows reading but
not writing, thus breaking this scheme at resume time)
- prevent IV reuse in the AES-GCM communication scheme between SNP
guests and the AMD secure processor
* tag 'x86_urgent_for_v6.1_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ioremap: Fix page aligned size calculation in __ioremap_caller()
x86/pm: Add enumeration check before spec MSRs save/restore setup
x86/tsx: Add a feature bit for TSX control MSR support
virt/sev-guest: Prevent IV reuse in the SNP guest driver
Pull perf fixes from Borislav Petkov:
"Two more fixes to the perf sigtrap handling:
- output the address in the sample only when it has been requested
- handle the case where user-only events can hit in kernel and thus
upset the sigtrap sanity checking"
* tag 'perf_urgent_for_v6.1_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Consider OS filter fail
perf: Fixup SIGTRAP and sample_flags interaction
I got a null-ptr-deref report as following when doing fault injection test:
BUG: kernel NULL pointer dereference, address: 0000000000000058
Oops: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 PID: 253 Comm: 507-spi-dm9051 Tainted: G B N 6.1.0-rc3+
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:klist_put+0x2d/0xd0
Call Trace:
<TASK>
klist_remove+0xf1/0x1c0
device_release_driver_internal+0x23e/0x2d0
bus_remove_device+0x1bd/0x240
device_del+0x357/0x770
phy_device_remove+0x11/0x30
mdiobus_unregister+0xa5/0x140
release_nodes+0x6a/0xa0
devres_release_all+0xf8/0x150
device_unbind_cleanup+0x19/0xd0
//probe path:
phy_device_register()
device_add()
phy_connect
phy_attach_direct() //set device driver
probe() //it's failed, driver is not bound
device_bind_driver() // probe failed, it's not called
//remove path:
phy_device_remove()
device_del()
device_release_driver_internal()
__device_release_driver() //dev->drv is not NULL
klist_remove() <- knode_driver is not added yet, cause null-ptr-deref
In phy_attach_direct(), after setting the 'dev->driver', probe() fails,
device_bind_driver() is not called, so the knode_driver->n_klist is not
set, then it causes null-ptr-deref in __device_release_driver() while
deleting device. Fix this by setting dev->driver to NULL in the error
path in phy_attach_direct().
Fixes: e13934563d ("[PATCH] PHY Layer fixup")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull kvm fixes from Paolo Bonzini:
"x86:
- Fixes for Xen emulation. While nobody should be enabling it in the
kernel (the only public users of the feature are the selftests),
the bug effectively allows userspace to read arbitrary memory.
- Correctness fixes for nested hypervisors that do not intercept INIT
or SHUTDOWN on AMD; the subsequent CPU reset can cause a
use-after-free when it disables virtualization extensions. While
downgrading the panic to a WARN is quite easy, the full fix is a
bit more laborious; there are also tests. This is the bulk of the
pull request.
- Fix race condition due to incorrect mmu_lock use around
make_mmu_pages_available().
Generic:
- Obey changes to the kvm.halt_poll_ns module parameter in VMs not
using KVM_CAP_HALT_POLL, restoring behavior from before the
introduction of the capability"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: Update gfn_to_pfn_cache khva when it moves within the same page
KVM: x86/xen: Only do in-kernel acceleration of hypercalls for guest CPL0
KVM: x86/xen: Validate port number in SCHEDOP_poll
KVM: x86/mmu: Fix race condition in direct_page_fault
KVM: x86: remove exit_int_info warning in svm_handle_exit
KVM: selftests: add svm part to triple_fault_test
KVM: x86: allow L1 to not intercept triple fault
kvm: selftests: add svm nested shutdown test
KVM: selftests: move idt_entry to header
KVM: x86: forcibly leave nested mode on vCPU reset
KVM: x86: add kvm_leave_nested
KVM: x86: nSVM: harden svm_free_nested against freeing vmcb02 while still in use
KVM: x86: nSVM: leave nested mode on vCPU free
KVM: Obey kvm.halt_poll_ns in VMs not using KVM_CAP_HALT_POLL
KVM: Avoid re-reading kvm->max_halt_poll_ns during halt-polling
KVM: Cap vcpu->halt_poll_ns before halting rather than after
Pull cifs fixes from Steve French:
"Two small cifs/smb3 client fixes:
- an unlock missing in an error path in copychunk_range found by
xfstest 476
- a fix for a use after free in a debug code path"
* tag '6.1-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix missing unlock in cifs_file_copychunk_range()
cifs: Use after free in debug code
Pull Kbuild fixes from Masahiro Yamada:
- Fix CC_HAS_ASM_GOTO_TIED_OUTPUT test in Kconfig
- Fix noisy "No such file or directory" message when
KBUILD_BUILD_VERSION is passed
- Include rust/ in source tarballs
- Fix missing FORCE for ARCH=nios2 builds
* tag 'kbuild-fixes-v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
nios2: add FORCE for vmlinuz.gz
scripts: add rust in scripts/Makefile.package
kbuild: fix "cat: .version: No such file or directory"
init/Kconfig: fix CC_HAS_ASM_GOTO_TIED_OUTPUT test with dash
Add FORCE to placate a warning from make:
arch/nios2/boot/Makefile:24: FORCE prerequisite is missing
Fixes: 2fc8483fdc ("nios2: Build infrastructure")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Pull nfsd fix from Chuck Lever:
- Fix rare data corruption on READ operations
* tag 'nfsd-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Fix reads with a non-zero offset that don't end on a page boundary
Sabrina Dubroca says:
============
This is the last part of my extack work for xfrm, adding extack
messages to the last remaining operations: NEWSPDINFO, ALLOCSPI,
MIGRATE, NEWAE, DELSA, EXPIRE.
The first patch does a few clean ups on code that will be changed
later on it the series.
============
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Pull power supply fixes from Sebastian Reichel:
- rk817: Two error handling fixes
- ip5xxx: fix inter overflow in current calculation
- ab8500: fix thermal zone probing
* tag 'for-v6.1-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: ab8500: Defer thermal zone probe
power: supply: ip5xxx: Fix integer overflow in current_now calculation
power: supply: rk817: Change rk817_chg_cur_to_reg to int
power: supply: rk817: check correct variable
Pull block fixes from Jens Axboe:
- A few fixes for s390 sads (Stefan, Colin)
- Ensure that ublk doesn't reorder requests, as that can be problematic
on devices that need specific ordering (Ming)
- Fix a queue reference leak in disk allocation handling (Christoph)
* tag 'block-6.1-2022-11-25' of git://git.kernel.dk/linux:
ublk_drv: don't forward io commands in reserve order
s390/dasd: fix possible buffer overflow in copy_pair_show
s390/dasd: fix no record found for raw_track_access
s390/dasd: increase printing of debug data payload
s390/dasd: Fix spelling mistake "Ivalid" -> "Invalid"
blk-mq: fix queue reference leak on blk_mq_alloc_disk_for_queue failure
Pull io_uring fixes from Jens Axboe:
- A few poll related fixes. One fixing a race condition between poll
cancelation and trigger, and one making the overflow handling a bit
more robust (Lin, Pavel)
- Fix an fput() for error handling in the direct file table (Lin)
- Fix for a regression introduced in this cycle, where we don't always
get TIF_NOTIFY_SIGNAL cleared appropriately (me)
* tag 'io_uring-6.1-2022-11-25' of git://git.kernel.dk/linux:
io_uring: clear TIF_NOTIFY_SIGNAL if set and task_work not available
io_uring/poll: fix poll_refs race with cancelation
io_uring/filetable: fix file reference underflow
io_uring: make poll refs more robust
io_uring: cmpxchg for poll arm refs release
Pull zonefs fixes from Damien Le Moal:
- Fix a race between zonefs module initialization of sysfs attribute
directory and mounting a drive (from Xiaoxu).
- Fix active zone accounting in the rare case of an IO error due to a
zone transition to offline or read-only state (from me).
* tag 'zonefs-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: Fix active zone accounting
zonefs: Fix race between modprobe and mount
Pull regulator fixes from Mark Brown:
"This is more changes than I'd like this late although the diffstat is
still fairly small, I kept on holding off as new fixes came in to give
things time to soak in -next but should probably have tagged and sent
an additional pull request earlier.
There's some relatively large fixes to the twl6030 driver to fix
issues with the TWL6032 variant which resulted from some work on the
core TWL6030 driver, a couple of fixes for error handling paths
(mostly in the core), and a nice stability fix for the sgl51000 driver
that's been pulled out of a BSP"
* tag 'regulator-fix-v6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: twl6030: fix get status of twl6032 regulators
regulator: twl6030: re-add TWL6032_SUBCLASS
regulator: slg51000: Wait after asserting CS pin
regulator: core: fix UAF in destroy_regulator()
regulator: rt5759: fix OOB in validate_desc()
regulator: core: fix kobject release warning and memory leak in regulator_register()
Pull btrfs fixes from David Sterba:
- fix a regression in nowait + buffered write
- in zoned mode fix endianness when comparing super block generation
- locking and lockdep fixes:
- fix potential sleeping under spinlock when setting qgroup limit
- lockdep warning fixes when btrfs_path is freed after copy_to_user
- do not modify log tree while holding a leaf from fs tree locked
- fix freeing of sysfs files of static features on error
- use kv.alloc for zone map allocation as a fallback to avoid warnings
due to high order allocation
- send, avoid unaligned encoded writes when attempting to clone range
* tag 'for-6.1-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: sysfs: normalize the error handling branch in btrfs_init_sysfs()
btrfs: do not modify log tree while holding a leaf from fs tree locked
btrfs: use kvcalloc in btrfs_get_dev_zone_info
btrfs: qgroup: fix sleep from invalid context bug in btrfs_qgroup_inherit()
btrfs: send: avoid unaligned encoded writes when attempting to clone range
btrfs: zoned: fix missing endianness conversion in sb_write_pointer
btrfs: free btrfs_path before copying subvol info to userspace
btrfs: free btrfs_path before copying fspath to userspace
btrfs: free btrfs_path before copying inodes to userspace
btrfs: free btrfs_path before copying root refs to userspace
btrfs: fix assertion failure and blocking during nowait buffered write
Pull power management fixes from Rafael Wysocki:
"These revert a recent change in the schedutil cpufreq governor that
had not been expected to make any functional difference, but turned
out to introduce a performance regression, fix an initialization issue
in the amd-pstate driver and make it actually replace the venerable
ACPI cpufreq driver on the supported systems by default.
Specifics:
- Revert a recent schedutil cpufreq governor change that introduced a
performace regression on Pixel 6 (Sam Wu)
- Fix amd-pstate driver initialization after running the kernel via
kexec (Wyes Karny)
- Turn amd-pstate into a built-in driver which allows it to take
precedence over acpi-cpufreq by default on supported systems and
amend it with a mechanism to disable this behavior (Perry Yuan)
- Update amd-pstate documentation in accordance with the other
changes made to it (Perry Yuan)"
* tag 'pm-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Documentation: add amd-pstate kernel command line options
Documentation: amd-pstate: add driver working mode introduction
cpufreq: amd-pstate: add amd-pstate driver parameter for mode selection
cpufreq: amd-pstate: change amd-pstate driver to be built-in type
cpufreq: amd-pstate: cpufreq: amd-pstate: reset MSR_AMD_PERF_CTL register at init
Revert "cpufreq: schedutil: Move max CPU capacity to sugov_policy"
Pull s390 updates from Alexander Gordeev:
- Fix size of incorrectly increased from four to eight bytes TOD field
of crash dump save area. As result in case of kdump NT_S390_TODPREG
ELF notes section contains correct value and "detected read beyond
size of field" compiler warning goes away.
- Fix memory leak in cryptographic Adjunct Processors (AP) module on
initialization failure path.
- Add Gerald Schaefer <gerald.schaefer@linux.ibm.com> and Alexander
Gordeev <agordeev@linux.ibm.com> as S390 memory management
maintainers. Also rename the S390 section to S390 ARCHITECTURE to be
a bit more precise.
* tag 's390-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
MAINTAINERS: add S390 MM section
s390/crashdump: fix TOD programmable field size
s390/ap: fix memory leak in ap_init_qci_info()
Pull hyperv fixes from Wei Liu:
- Fix IRTE allocation in Hyper-V PCI controller (Dexuan Cui)
- Fix handling of SCSI srb_status and capacity change events (Michael
Kelley)
- Restore VP assist page after CPU offlining and onlining (Vitaly
Kuznetsov)
- Fix some memory leak issues in VMBus (Yang Yingliang)
* tag 'hyperv-fixes-signed-20221125' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: fix possible memory leak in vmbus_device_register()
Drivers: hv: vmbus: fix double free in the error path of vmbus_add_channel_work()
PCI: hv: Only reuse existing IRTE allocation for Multi-MSI
scsi: storvsc: Fix handling of srb_status and capacity change events
x86/hyperv: Restore VP assist page after cpu offlining/onlining
Pull hotfixes from Andrew Morton:
"24 MM and non-MM hotfixes. 8 marked cc:stable and 16 for post-6.0
issues.
There have been a lot of hotfixes this cycle, and this is quite a
large batch given how far we are into the -rc cycle. Presumably a
reflection of the unusually large amount of MM material which went
into 6.1-rc1"
* tag 'mm-hotfixes-stable-2022-11-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (24 commits)
test_kprobes: fix implicit declaration error of test_kprobes
nilfs2: fix nilfs_sufile_mark_dirty() not set segment usage as dirty
mm/cgroup/reclaim: fix dirty pages throttling on cgroup v1
mm: fix unexpected changes to {failslab|fail_page_alloc}.attr
swapfile: fix soft lockup in scan_swap_map_slots
hugetlb: fix __prep_compound_gigantic_page page flag setting
kfence: fix stack trace pruning
proc/meminfo: fix spacing in SecPageTables
mm: multi-gen LRU: retry folios written back while isolated
mailmap: update email address for Satya Priya
mm/migrate_device: return number of migrating pages in args->cpages
kbuild: fix -Wimplicit-function-declaration in license_is_gpl_compatible
MAINTAINERS: update Alex Hung's email address
mailmap: update Alex Hung's email address
mm: mmap: fix documentation for vma_mas_szero
mm/damon/sysfs-schemes: skip stats update if the scheme directory is removed
mm/memory: return vm_fault_t result from migrate_to_ram() callback
mm: correctly charge compressed memory to its memcg
ipc/shm: call underlying open/close vm_ops
gcov: clang: fix the buffer overflow issue
...
Pull vfs fixes from Al Viro:
"A couple of fixes, one of them for this cycle regression..."
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: vfs_tmpfile: ensure O_EXCL flag is enforced
fs: use acquire ordering in __fget_light()
