Guillaume Nault says:
====================
net/sched: Add actions for MPLS L2 VPNs
This patch series adds the necessary TC actions for supporting layer 2
MPLS VPNs (VPLS).
The objective is to give the possibility to add an MPLS header right
before an skb's mac header, then to prepend this MPLS packet with a
new Ethernet header with the MAC address of the next hop.
Patch 1 implements the actions for adding and removing the external
Ethernet header.
Patch 2 adds the possibility to push an MPLS header before the mac
header.
Most of the code already exists as these operations were first
implemented in openvswitch.
Practical example, with encap on Host-A and decap on Host-B:
Host-A# tc filter add dev ethAx ingress matchall \
action mpls mac_push label 20 \
action vlan push_eth dst_mac 02:00:00:00:00:02 \
src_mac 02:00:00:00:00:01 \
action mirred egress redirect dev ethAy
Host-B# tc filter add dev ethBx ingress protocol mpls_uc \
flower mpls_label 20 mpls_bos 1 \
action vlan pop_eth \
action mpls pop proto teb \
action mirred egress redirect dev ethBy
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Define the MAC_PUSH action which pushes an MPLS LSE before the mac
header (instead of between the mac and the network headers as the
plain PUSH action does).
The only special case is when the skb has an offloaded VLAN. In that
case, it has to be inlined before pushing the MPLS header.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement TCA_VLAN_ACT_POP_ETH and TCA_VLAN_ACT_PUSH_ETH, to
respectively pop and push a base Ethernet header at the beginning of a
frame.
POP_ETH is just a matter of pulling ETH_HLEN bytes. VLAN tags, if any,
must be stripped before calling POP_ETH.
PUSH_ETH is restricted to skbs with no mac_header, and only the MAC
addresses can be configured. The Ethertype is automatically set from
skb->protocol. These restrictions ensure that all skb's fields remain
consistent, so that this action can't confuse other part of the
networking stack (like GSO).
Since openvswitch already had these actions, consolidate the code in
skbuff.c (like for vlan and mpls push/pop).
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the comparisons of u16 integers value and sopass_val with
less than zero for error checking is always false because the values
are unsigned. Fix this by making these variables int. This does not
affect the shift and mask operations performed on these variables
Addresses-Coverity: ("Unsigned compared against zero")
Fixes: 49fc23018e ("net: phy: dp83869: support Wake on LAN")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The check for old hardware versions that did not have SMCDv2 support was
using suspicious pointer magic. Address the fields using an array.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When building a CLC proposal message then the list of ISM devices does
not need to contain multiple devices that have the same chid value,
all these devices use the same function at the end.
Improve smc_find_ism_v2_device_clnt() to collect only ISM devices that
have unique chid values.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean says:
===================
Add Seville Ethernet switch to T1040RDB
Seville is a DSA switch that is embedded inside the T1040 SoC, and
supported by the mscc_seville DSA driver inside drivers/net/dsa/ocelot.
This series adds this switch to the SoC's dtsi files and to the T1040RDB
board file.
I would like to send this series through net-next. There is no conflict
with other patches submitted to T1040 device tree. Maybe this could at
least get an ACK from devicetree maintainers.
===================
Signed-off-by: David S. Miller <davem@davemloft.net>
Define the network interface names for the switch ports and hook them up
to the 2 QSGMII PHYs that are onboard.
A conscious decision was taken to go along with the numbers that are
written on the front panel of the board and not with the hardware
numbers of the switch chip ports.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The retransmission refactoring patch
686989700c ("tcp: simplify tcp_mark_skb_lost")
does not properly update the total lost packet counter which may
break the policer mode in BBR. This patch fixes it.
Fixes: 686989700c ("tcp: simplify tcp_mark_skb_lost")
Reported-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for the BQ25980, BQ25975 and BQ25960 family of flash
chargers.
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Fix many (lots deleted here) build errors in hinic by selecting NET_DEVLINK.
ld: drivers/net/ethernet/huawei/hinic/hinic_hw_dev.o: in function `mgmt_watchdog_timeout_event_handler':
hinic_hw_dev.c:(.text+0x30a): undefined reference to `devlink_health_report'
ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_fw_reporter_dump':
hinic_devlink.c:(.text+0x1c): undefined reference to `devlink_fmsg_u32_pair_put'
ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_fw_reporter_dump':
hinic_devlink.c:(.text+0x126): undefined reference to `devlink_fmsg_binary_pair_put'
ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_hw_reporter_dump':
hinic_devlink.c:(.text+0x1ba): undefined reference to `devlink_fmsg_string_pair_put'
ld: hinic_devlink.c:(.text+0x227): undefined reference to `devlink_fmsg_u8_pair_put'
ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_devlink_alloc':
hinic_devlink.c:(.text+0xaee): undefined reference to `devlink_alloc'
ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_devlink_free':
hinic_devlink.c:(.text+0xb04): undefined reference to `devlink_free'
ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_devlink_register':
hinic_devlink.c:(.text+0xb26): undefined reference to `devlink_register'
ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_devlink_unregister':
hinic_devlink.c:(.text+0xb46): undefined reference to `devlink_unregister'
ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_health_reporters_create':
hinic_devlink.c:(.text+0xb75): undefined reference to `devlink_health_reporter_create'
ld: hinic_devlink.c:(.text+0xb95): undefined reference to `devlink_health_reporter_create'
ld: hinic_devlink.c:(.text+0xbac): undefined reference to `devlink_health_reporter_destroy'
ld: drivers/net/ethernet/huawei/hinic/hinic_devlink.o: in function `hinic_health_reporters_destroy':
Fixes: 51ba902a16 ("net-next/hinic: Initialize hw interface")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Bin Luo <luobin9@huawei.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Aviad Krawczyk <aviad.krawczyk@huawei.com>
Cc: Zhao Chen <zhaochen6@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Julian Wiedmann says:
====================
net/iucv: updates 2020-10-01
Just two (rare) patches, and both deal with smatch warnings.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
smatch complains about
net/iucv/iucv.c:1119 __iucv_message_receive() warn: inconsistent indenting
While touching this line, also make the return logic consistent and thus
get rid of a goto label.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
smatch complains about
net/iucv/af_iucv.c:624 iucv_sock_bind() error: memcpy() 'sa->siucv_user_id' too small (8 vs 9)
Which is absolutely correct - the memcpy() takes 9 bytes (sizeof(uid))
from an 8-byte field (sa->siucv_user_id).
Luckily the sockaddr_iucv struct contains more data after the
.siucv_user_id field, and we checked the size of the passed data earlier
on. So the memcpy() won't accidentally read from an invalid location.
Fix the warning by reducing the size of the uid variable to what's
actually needed, and thus reducing the amount of copied data.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NETDEV_HW_ADDR_T_SLAVE is not used anymore, remove it.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ethtool manual stated that the tx-timer is the "the amount of time the
device should stay in idle mode prior to asserting its Tx LPI". The
previous implementation for "ethtool --set-eee tx-timer" sets the LPI TW
timer duration which is not correct. Hence, this patch fixes the
"ethtool --set-eee tx-timer" to configure the EEE LPI timer.
The LPI TW Timer will be using the defined default value instead of
"ethtool --set-eee tx-timer" which follows the EEE LS timer implementation.
Changelog V2
*Not removing/modifying the eee_timer.
*EEE LPI timer can be configured through ethtool and also the eee_timer
module param.
*EEE TW Timer will be configured with default value only, not able to be
configured through ethtool or module param. This follows the implementation
of the EEE LS Timer.
Fixes: d765955d2a ("stmmac: add the Energy Efficient Ethernet support")
Signed-off-by: Vineetha G. Jaya Kumaran <vineetha.g.jaya.kumaran@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When I cat some module parameters by sysfs, it displays as follows.
It's better to add a newline for easy reading.
root@syzkaller:~# cd /sys/module/test_power/parameters/
root@syzkaller:/sys/module/test_power/parameters# cat ac_online
onroot@syzkaller:/sys/module/test_power/parameters# cat battery_present
trueroot@syzkaller:/sys/module/test_power/parameters# cat battery_health
goodroot@syzkaller:/sys/module/test_power/parameters# cat battery_status
dischargingroot@syzkaller:/sys/module/test_power/parameters# cat battery_technology
LIONroot@syzkaller:/sys/module/test_power/parameters# cat usb_online
onroot@syzkaller:/sys/module/test_power/parameters#
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Johannes Berg says:
====================
genetlink per-op policy export
Here's a respin, now including Jakub's patch last so that it will
do the right thing from the start.
The first patch remains the same, of course; the others have mostly
some rebasing going on, except for the actual export patch (patch 4)
which is adjusted per Jakub's review comments about exporting the
policy only if it's actually used for do/dump.
To see that, the dump for "nlctrl" (i.e. the generic netlink control)
is instructive, because the ops are this:
{
.cmd = CTRL_CMD_GETFAMILY,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
.policy = ctrl_policy_family,
.maxattr = ARRAY_SIZE(ctrl_policy_family) - 1,
.doit = ctrl_getfamily,
.dumpit = ctrl_dumpfamily,
},
{
.cmd = CTRL_CMD_GETPOLICY,
.policy = ctrl_policy_policy,
.maxattr = ARRAY_SIZE(ctrl_policy_policy) - 1,
.start = ctrl_dumppolicy_start,
.dumpit = ctrl_dumppolicy,
.done = ctrl_dumppolicy_done,
},
So we exercise both "don't have doit" and "GENL_DONT_VALIDATE_DUMP"
parts, and get (with the current genl patch):
$ genl ctrl policy name nlctrl
ID: 0x10 op 3 policies: do=0
ID: 0x10 op 10 policies: dump=1
ID: 0x10 policy[0]:attr[1]: type=U16 range:[0,65535]
ID: 0x10 policy[0]:attr[2]: type=NUL_STRING max len:15
ID: 0x10 policy[1]:attr[1]: type=U16 range:[0,65535]
ID: 0x10 policy[1]:attr[2]: type=NUL_STRING max len:15
ID: 0x10 policy[1]:attr[10]: type=U32 range:[0,4294967295]
====================
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Right now CTRL_CMD_GETPOLICY can only dump the family-wide
policy. Support dumping policy of a specific op.
v3:
- rebase after per-op policy export and handle that
v2:
- make cmd U32, just in case.
v1:
- don't echo op in the output in a naive way, this should
make it cleaner to extend the output format for dumping
policies for all the commands at once in the future.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20201001225933.1373426-11-kuba@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for per-op policy dumping. The data is pretty much
as before, except that now the assumption that the policy with
index 0 is "the" policy no longer holds - you now need to look
at the new CTRL_ATTR_OP_POLICY attribute which is a nested attr
(indexed by op) containing attributes for do and dump policies.
When a single op is requested, the CTRL_ATTR_OP_POLICY will be
added in the same way, since do and dump policies may differ.
v2:
- conditionally advertise per-command policies only if there
actually is a policy being used for the do/dump and it's
present at all
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rework the policy dump code a bit to support adding multiple
policies to a single dump, in order to e.g. support per-op
policies in generic netlink.
v2:
- move kernel-doc to implementation [Jakub]
- squash the first patch to not flip-flop on the prototype
[Jakub]
- merge netlink_policy_dump_get_policy_idx() with the old
get_policy_idx() we already had
- rebase without Jakub's patch to have per-op dump
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The maxtype is really an integral part of the policy, and while we
haven't gotten into a situation yet where this happens, it seems
that some developer might eventually have two places pointing to
identical policies, with different maxattr to exclude some attrs
in one of the places.
Even if not, it's really the right thing to compare both since the
two data items fundamentally belong together.
v2:
- also do the proper comparison in get_policy_idx()
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Visconti5 SoC changes for v5.10 (take two)
- Add dt-bindings for Toshiba Visconti ARM SoCs
- Add dt-bindings for the TMPV7708 RM main board
- Add initial support for Toshiba Visconti platform
- Add device tree for TMPV7708 RM main board
- Add information for Toshiba Visconti ARM SoCs to MAINTAINERS
- Enable configs for Toshiba Visconti to arm64's defconfig
* tag 'visconti-initial-for-5.10-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti:
arm64: defconfig: Enable configs for Toshiba Visconti
MAINTAINERS: Add information for Toshiba Visconti ARM SoCs
arm64: dts: visconti: Add device tree for TMPV7708 RM main board
arm64: visconti: Add initial support for Toshiba Visconti platform
dt-bindings: arm: toshiba: Add the TMPV7708 RM main board
dt-bindings: arm: toshiba: add Toshiba Visconti ARM SoCs
Link: https://lore.kernel.org/r/20200923085236.4hu53gmnnmqkttuy@toshiba.co.jp
Signed-off-by: Olof Johansson <olof@lixom.net>
Qualcomm ARM64defconfig updates for v5.10
Enable Qualcomm related drivers for Lontium LT9611 HDMI bridge, SNPS
high-speed USB PHY, various Interconnect providers, GPU clock
controllers for SM8150 and SM8250 and audio driver for MSM8996 and
APQ8016.
Then enable ACM and FTDI host drivers, which are useful when working
with various development boards using ARM64 hosts.
* tag 'qcom-arm64-defconfig-for-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: defconfig: enable Qualcomm ASoC modules
arm64: defconfig: qcom: enable GPU clock controller for SM8[12]50
arm64: defconfig: enable INTERCONNECT for Qualcomm chipsets
arm64: defconfig: Enable Qcom SNPS Femto PHY
arm64: defconfig: Enable Lontium LT9611 driver
arm64: defcondfig: Enable USB ACM and FTDI drivers
Link: https://lore.kernel.org/r/20200924040708.180352-1-bjorn.andersson@linaro.org
Signed-off-by: Olof Johansson <olof@lixom.net>
i.MX defconfig update for 5.10:
- Enable i.MX6SLL, i.MX7ULP SoC and CAAM crypto driver support in
multi_v7_defconfig.
- Enable the eLCDIF and Raydium RM67191 driver in arm64 defconfig to
support MIPI DSI on imx8mq-evk.
- Enable NWL DSI host controller, dphy and SITRONIX ST7703 panel driver
in arm64 defconfig to support display on imx8mq-librem5-devkit.
- Enable sl28cpld board management controller driver support in arm64
defconfig.
- Enable i.MX8M SoCs support in imx_v6_v7_defconfig as they can run in
AArch32 mode.
* tag 'imx-defconfig-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: defconfig: enable the sl28cpld board management controller
arm64: defconfig: Enable the eLCDIF and Raydium RM67191 drivers
arm64: defconfig: Enable imx8mq-librem5-devkit display stack
arm64: defconfig: re-sync DRM related defconfig bits
ARM: imx_v6_v7_defconfig: Support i.MX8MN/P/Q
ARM: multi_v7_defconfig: Enable i.MX7ULP SoC
ARM: multi_v7_defconfig: Enable i.MX6SLL SoC
ARM: multi_v7_defconfig: enable caam crypto module
Link: https://lore.kernel.org/r/20200923073009.23678-6-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
The driver defines two of 'struct i2c_device_id' but uses only one:
drivers/power/supply/pm2301_charger.c:107:35: warning:
'pm2xxx_ident' defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The 'charger' variable in error path is assigned but never used:
drivers/power/supply/charger-manager.c: In function 'charger_manager_probe':
drivers/power/supply/charger-manager.c:1626:29: warning: variable 'charger' set but not used [-Wunused-but-set-variable]
Fixes: c1f73028f7 ("power: supply: charger-manager: Update extcon functions")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Since ACPI_PTR() is used to NULLify the value when !CONFIG_ACPI, the
struct acpi_device_id becomes unused:
drivers/power/supply/rt9455_charger.c:1734:36: warning:
'rt9455_i2c_acpi_match' defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Since ACPI_PTR() is used to NULLify the value when !CONFIG_ACPI, the
struct acpi_device_id becomes unused:
drivers/power/supply/goldfish_battery.c:269:36: warning:
'goldfish_battery_acpi_match' defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Since ACPI_PTR() is used to NULLify the value when !CONFIG_ACPI, the
struct acpi_device_id becomes unused:
drivers/power/supply/bq25890_charger.c:1076:36: warning:
'bq25890_acpi_match' defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Fix kerneldoc W=1 warning:
drivers/power/supply/bq2515x_charger.c:189: warning:
Function parameter or member 'init_data' not described in 'bq2515x_device'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Since ACPI_PTR() is used to NULLify the value when !CONFIG_ACPI, the
struct acpi_device_id becomes unused:
drivers/power/supply/bq24257_charger.c:1155:36: warning:
'bq24257_acpi_match' defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
i.MX SoC update for 5.10:
- A series from Fabio Estevam to remove legacy non-DT i.MX platforms
support and related board files. This is a natural move, as the
platforms had been converted to DT for years, and we have not seen
any users around these legacy non-DT support for a while.
- Enable cpufreq support for i.MX7ULP platform.
* tag 'imx-soc-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (26 commits)
clk: imx: imx35: Remove mx35_clocks_init()
clk: imx: imx31: Remove mx31_clocks_init()
clk: imx: imx27: Remove mx27_clocks_init()
ARM: imx: Remove unused definitions
ARM: imx35: Retrieve the IIM base address from devicetree
ARM: imx3: Retrieve the AVIC base address from devicetree
ARM: imx3: Retrieve the CCM base address from devicetree
ARM: imx31: Retrieve the IIM base address from devicetree
ARM: imx27: Retrieve the CCM base address from devicetree
ARM: imx27: Retrieve the SYSCTRL base address from devicetree
ARM: imx: Remove remnant board file support pieces
ARM: imx: Remove imx device directory
ARM: imx: Remove iomux-v3 board code
ARM: imx3: Remove imx3 soc_init()
ARM: imx31: Remove remaining i.MX31 board code
ARM: imx27: Retrieve AVIC base address from devicetree
ARM: imx27: Get rid of mm-imx27.c
ARM: imx27: Remove iomux-v1 board code
ARM: imx27: Remove imx27_soc_init()
ARM: imx7ulp: enable cpufreq
...
Link: https://lore.kernel.org/r/20200923073009.23678-2-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Hisilicon ARM SoC updates for v5.10
- Add SD5203 SoC support which core is ARM926EJ-S
- Add Low-level debugging support for SD5203
* tag 'hisi-arm-soc-for-5.10' of git://github.com/hisilicon/linux-hisi:
ARM: debug: add UART early console support for SD5203
ARM: hisi: add support for SD5203 SoC
Link: https://lore.kernel.org/r/5F742928.2060202@hisilicon.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Defconfig changes for omaps for v5.10 merge window
Enable twl4030_madc as a loadable module as the ADC is used
on some devices by the battery charger. And enable more widely
used networking options as loadable modules where possible.
* tag 'omap-for-v5.10/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: enable generic net options
ARM: omap2plus_defconfig: enable twl4030_madc as a loadable module
Link: https://lore.kernel.org/r/pull-1601445968-476435@atomide.com-3
Signed-off-by: Olof Johansson <olof@lixom.net>
One more SoC change for omaps for v5.10 merge window
Remove debugfs dependency for enabling off mode during idle
for omap3 by enabling it automatically based on the PMIC
configuration.
* tag 'omap-for-v5.10/soc-part2-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap3: enable off mode automatically
Link: https://lore.kernel.org/r/pull-1601445968-476435@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
This pull request contains a patch that shifts to using new simplified
i2c driver probe method inside mach-davinci (i2c_driver->probe_new())
* tag 'davinci-for-v5.10/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: use simple i2c probe function
Link: https://lore.kernel.org/r/83eff002-5247-4fb6-33b4-ce7cec3d2d5c@ti.com
Signed-off-by: Olof Johansson <olof@lixom.net>
One-element and zero-length arrays are deprecated [1]. Kernel
code should always use "flexible array members" instead, except
for existing uapi definitions.
The script warns about one-element and zero-length arrays in structs.
[1] commit 68e4cd17e2 ("docs: deprecated.rst: Add zero-length and
one-element arrays")
Cc: Kees Cook <keescook@chromium.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
cmdq helper:
- add new functionality for writing and reading values to and from addresses
* tag 'v5.9-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
drm/mediatek: reduce clear event
soc: mediatek: cmdq: add clear option in cmdq_pkt_wfe api
soc: mediatek: cmdq: add jump function
soc: mediatek: cmdq: add write_s_mask value function
soc: mediatek: cmdq: add write_s value function
soc: mediatek: cmdq: add read_s function
soc: mediatek: cmdq: add write_s_mask function
soc: mediatek: cmdq: add write_s function
soc: mediatek: cmdq: add address shift in jump
soc: mediatek: mtk-infracfg: Fix kerneldoc
Link: https://lore.kernel.org/r/ac672cc9-059c-b768-3a67-1f674d4a2b7a@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
Memory controller drivers for v5.10, part two
1. Add support for MT8167 to Mediatek SMI.
2. Compile test fix (omap-gpmc) and duplicate code (tegra).
3. Simplify code with DEFINE_SHOW_ATTRIBUTE.
* tag 'memory-controller-drv-5.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: emif: Convert to DEFINE_SHOW_ATTRIBUTE
memory: tegra: Convert to DEFINE_SHOW_ATTRIBUTE
memory: omap-gpmc: Fix compile test on SPARC
memory: mtk-smi: add support for MT8167
dt-bindings: memory: mediatek: Add binding for MT8167 SMI
memory: tegra: Delete duplicated argument to '|' in function tegra210_emc_r21021_periodic_compensation
Link: https://lore.kernel.org/r/20200925152523.14608-1-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
Reset controller updates for v5.10
This tag allows to build reset-imx7 as a module, and adds support to
reset the Cortex-M4 processor on i.MX8MQ to it, adds support for the
Versal platform to the reset-zynqmp driver, and fixes some kerneldoc
comments in the core and in sti/reset-syscfg.
* tag 'reset-for-v5.10' of git://git.pengutronix.de/pza/linux:
reset: sti: reset-syscfg: fix struct description warnings
reset: imx7: add the cm4 reset for i.MX8MQ
dt-bindings: reset: imx8mq: add m4 reset
reset: Fix and extend kerneldoc
reset: reset-zynqmp: Added support for Versal platform
dt-bindings: reset: Updated binding for Versal reset driver
reset: imx7: Support module build
Link: https://lore.kernel.org/r/2b77c90d2b970eb8fa09000b9ecb564bffa76374.camel@pengutronix.de
Signed-off-by: Olof Johansson <olof@lixom.net>
Qualcomm driver updates for v5.10
Replace the busy wait for free tcs slots in the RPMh driver with a
sleeping wait and use memory barriers when writing the command registers.
Add a bunch of SoC ids to the socinfo driver, fix an erro printin the
apr driver and migrate llcc to devm_platform_ioremap_resource_byname().
* tag 'qcom-drivers-for-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: llcc: use devm_platform_ioremap_resource_byname()
soc: qcom: apr: Fixup the error displayed on lookup failure
soc: qcom: socinfo: Add msm8992/4 and apq8094 SoC IDs
soc: qcom: rpmh-rsc: Sleep waiting for tcs slots to be free
soc: qcom-geni-se: Don't use relaxed writes when writing commands
soc: qcom: socinfo: add SC7180 entry to soc_id array
soc: qcom: socinfo: add soc id for IPQ6018
Link: https://lore.kernel.org/r/20200924040504.179708-1-bjorn.andersson@linaro.org
Signed-off-by: Olof Johansson <olof@lixom.net>
NXP/FSL SoC driver updates for v5.10
Fix various compile warnings and static analysis warnings for:
- QBMan driver
- DPIO driver
- QE driver
* tag 'soc-fsl-next-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
soc: fsl: qe: Remove unnessesary check in ucc_set_tdm_rxtx_clk
soc: fsl: qman: convert to use be32_add_cpu()
soc: fsl: dpio: remove set but not used 'addr_cena'
soc: fsl: qbman: Fix return value on success
soc: fsl: qman: fix -Wpacked-not-aligned warnings
Link: https://lore.kernel.org/r/20200923224416.25788-1-leoyang.li@nxp.com
Signed-off-by: Olof Johansson <olof@lixom.net>
i.MX drivers update for 5.10:
- Use dev_err_probe() to simplify error handling for i.MX GPCv2 driver.
- Add a check in i.MX SCU power domain driver to ignore the power
domains that are not owned by the current partition.
* tag 'imx-drivers-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
firmware: imx: scu-pd: ignore power domain not owned
soc: imx: gpcv2: Use dev_err_probe() to simplify error handling
Link: https://lore.kernel.org/r/20200923073009.23678-1-shawnguo@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>
