[ Upstream commit 9311e9540a8b406d9f028aa87fb072a3819d4c82 ]
In bareudp.sh, this script uses /bin/sh and it will load another lib.sh
BASH script at the very beginning.
But on some operating systems like Ubuntu, /bin/sh is actually pointed to
DASH, thus it will try to run BASH commands with DASH and consequently
leads to syntax issues:
# ./bareudp.sh: 4: ./lib.sh: Bad substitution
# ./bareudp.sh: 5: ./lib.sh: source: not found
# ./bareudp.sh: 24: ./lib.sh: Syntax error: "(" unexpected
Fix this by explicitly using BASH for bareudp.sh. This fixes test
execution failures on systems where /bin/sh is not BASH.
Reported-by: Edoardo Canepa <edoardo.canepa@canonical.com>
Link: https://bugs.launchpad.net/bugs/2129812
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20251027095710.2036108-2-po-hsu.lin@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ee79980f7a428ec299f6261bea4c1084dcbc9631 upstream.
MPTCP Join "fastclose server" selftest is sometimes failing because the
client output file doesn't have the expected size, e.g. 296B instead of
1024B.
When looking at a packet trace when this happens, the server sent the
expected 1024B in two parts -- 100B, then 924B -- then the MP_FASTCLOSE.
It is then strange to see the client only receiving 296B, which would
mean it only got a part of the second packet. The problem is then not on
the networking side, but rather on the data reception side.
When mptcp_connect is launched with '-f -1', it means the connection
might stop before having sent everything, because a reset has been
received. When this happens, the program was directly stopped. But it is
also possible there are still some data to read, simply because the
previous 'read' step was done with a buffer smaller than the pending
data, see do_rnd_read(). In this case, it is important to read what's
left in the kernel buffers before stopping without error like before.
SIGPIPE is now ignored, not to quit the app before having read
everything.
Fixes: 6bf41020b7 ("selftests: mptcp: update and extend fastclose test-cases")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-5-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit aea73bae662a0e184393d6d7d0feb18d2577b9b9 upstream.
Some of these 'remove' tests rarely fail because a subflow has been
reset instead of cleanly removed. This can happen when one extra subflow
which has never carried data is being closed (FIN) on one side, while
the other is sending data for the first time.
To avoid such subflows to be used right at the end, the backup flag has
been added. With that, data will be only carried on the initial subflow.
Fixes: d2c4333a80 ("selftests: mptcp: add testcases for removing addrs")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-2-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 63c643aa7b7287fdbb0167063785f89ece3f000f upstream.
The "fallback due to TCP OoO" was never printed because the stat_ooo_now
variable was checked twice: once in the parent if-statement, and one in
the child one. The second condition was then always true then, and the
'else' branch was never taken.
The idea is that when there are more ACK + MP_CAPABLE than expected, the
test either fails if there was no out of order packets, or a notice is
printed.
Fixes: 69ca3d29a7 ("mptcp: update selftest for fallback due to OoO")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251110-net-mptcp-sft-join-unstable-v1-1-a4332c714e10@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd4adb986a86727ed8f56c48b6d0695f1e211e65 upstream.
The tracing selftest "event-filter-function.tc" was failing because it
first runs the "sample_events" function that triggers the kmem_cache_free
event and it looks at what function was used during a call to "ls".
But the first time it calls this, it could trigger events that are used to
pull pages into the page cache.
The rest of the test uses the function it finds during that call to see if
it will be called in subsequent "sample_events" calls. But if there's no
need to pull pages into the page cache, it will not trigger that function
and the test will fail.
Call the "sample_events" twice to trigger all the page cache work before
it calls it to find a function to use in subsequent checks.
Cc: stable@vger.kernel.org
Fixes: eb50d0f250 ("selftests/ftrace: Choose target function for filter test from samples")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 57531b3416448d1ced36a2a974a4085ec43d57b0 ]
It seems that most of the tests prepare the interfaces once before the test
run (setup_prepare()), rely on setup_wait() to wait for link and only then
run the test(s).
local_termination brings the physical interfaces down and up during test
run but never wait for them to come up. If the auto-negotiation takes
some seconds, first test packets are being lost, which leads to
false-negative test results.
Use setup_wait() in run_test() to make sure auto-negotiation has been
completed after all simple_if_init() calls on physical interfaces and test
packets will not be lost because of the race against link establishment.
Fixes: 90b9566aa5 ("selftests: forwarding: add a test for local_termination.sh")
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://patch.msgid.link/20251106161213.459501-1-alexander.sverdlin@siemens.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit afbf75e8da8ce8a0698212953d350697bb4355a6 upstream.
The longest running netdevsim test, nexthop.sh, currently takes
5 min to finish. Around 260s to be exact, and 310s on a debug kernel.
The default timeout in selftest is 45sec, so we need an explicit
config. Give ourselves some headroom and use 10min.
Commit under Fixes isn't really to "blame" but prior to that
netdevsim tests weren't integrated with kselftest infra
so blaming the tests themselves doesn't seem right, either.
Fixes: 8ff25dac88f6 ("netdevsim: add Makefile for selftests")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d01f8136d46b925798abcf86b35a4021e4cfb8bb ]
The script "ethtool-common.sh" is not installed in INSTALL_PATH, and
triggers some errors when I try to run the test
'drivers/net/netdevsim/ethtool-coalesce.sh':
TAP version 13
1..1
# timeout set to 600
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# ./ethtool-coalesce.sh: line 4: ethtool-common.sh: No such file or directory
# ./ethtool-coalesce.sh: line 25: make_netdev: command not found
# ethtool: bad command line argument(s)
# ./ethtool-coalesce.sh: line 124: check: command not found
# ./ethtool-coalesce.sh: line 126: [: -eq: unary operator expected
# FAILED /0 checks
not ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh # exit=1
Install this file to avoid this error. After this patch:
TAP version 13
1..1
# timeout set to 600
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# PASSED all 22 checks
ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh
Fixes: fbb8531e58 ("selftests: extract common functions in ethtool-common.sh")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Link: https://patch.msgid.link/20251030040340.3258110-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8e8486702abb05b8c734093aab1606af0eac068 ]
The GRO self-test, gro.c, currently constructs IPv6 packets containing a
Hop-by-Hop Options header (IPPROTO_HOPOPTS) to ensure the GRO path
correctly handles IPv6 extension headers.
However, network elements may be configured to drop packets with the
Hop-by-Hop Options header (HBH). This causes the self-test to fail
in environments where such network elements are present.
To improve the robustness and reliability of this test in diverse
network environments, switch from using IPPROTO_HOPOPTS to
IPPROTO_DSTOPTS (Destination Options).
The Destination Options header is less likely to be dropped by
intermediate routers and still serves the core purpose of the test:
validating GRO's handling of an IPv6 extension header. This change
ensures the test can execute successfully without being incorrectly
failed by network policies outside the kernel's control.
Fixes: 7d1575014a ("selftests/net: GRO coalesce test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Anubhav Singh <anubhavsinggh@google.com>
Link: https://patch.msgid.link/20251030060436.1556664-1-anubhavsinggh@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e321d590cec6053cb3c566413794706035ee638 ]
Currently there is no test which checks that IPv6 extension header packets
successfully coalesce. This commit adds a test, which verifies two IPv6
packets with HBH extension headers do coalesce, and another test which
checks that packets with different extension header data do not coalesce
in GRO.
I changed the receive socket filter to accept a packet with one extension
header. This change exposed a bug in the fragment test -- the old BPF did
not accept the fragment packet. I updated correct_num_packets in the
fragment test accordingly.
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/69282fed-2415-47e8-b3d3-34939ec3eb56@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: f8e8486702ab ("selftests/net: use destination options instead of hop-by-hop")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02d064de05b1fcca769391fa82d205bed8bb9bf0 ]
Due to the gro_sender sending data packets and FIN packets
in very quick succession, these are received almost simultaneously
by the gro_receiver. FIN packets are sometimes processed before the
data packets leading to intermittent (~1/100) test failures.
This change adds a delay of 100ms before sending FIN packets
in gro:tcp test to avoid the out-of-order delivery. The same
mitigation already exists for the gro:ip test.
Fixes: 7d1575014a ("selftests/net: GRO coalesce test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Anubhav Singh <anubhavsinggh@google.com>
Link: https://patch.msgid.link/20251030062818.1562228-1-anubhavsinggh@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47efbac9b768553331b9459743a29861e0acd797 ]
Use require_command() so that the test will return SKIP (4) when a
required command is not present.
Before:
# ./traceroute.sh
SKIP: Could not run IPV6 test without traceroute6
SKIP: Could not run IPV4 test without traceroute
$ echo $?
0
After:
# ./traceroute.sh
TEST: traceroute6 not installed [SKIP]
$ echo $?
4
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250908073238.119240-6-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc4c0a48bdad7f225740b8e750fdc1da6d85e1eb ]
The get_next_frame() function in psock_tpacket.c was missing a return
statement in its default switch case, leading to a compiler warning.
This was caused by a `bug_on(1)` call, which is defined as an
`assert()`, being compiled out because NDEBUG is defined during the
build.
Instead of adding a `return NULL;` which would silently hide the error
and could lead to crashes later, this change restores the original
author's intent. By adding `#undef NDEBUG` before including <assert.h>,
we ensure the assertion is active and will cause the test to abort if
this unreachable code is ever executed.
Signed-off-by: Wake Liu <wakel@google.com>
Link: https://patch.msgid.link/20250809062013.2407822-1-wakel@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c36748e8733ef9c5f4cd1d7c4327994e5b88b8df ]
The `__WORDSIZE` macro, defined in the non-standard `<bits/wordsize.h>`
header, is a GNU extension and not universally available with all
toolchains, such as Clang when used with musl libc.
This can lead to build failures in environments where this header is
missing.
The intention of the code is to determine the bit width of a C `long`.
Replace the non-portable `__WORDSIZE` with the standard and portable
`sizeof(long) * 8` expression to achieve the same result.
This change also removes the inclusion of the now-unused
`<bits/wordsize.h>` header.
Signed-off-by: Wake Liu <wakel@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a73ca0449bcb7c238097cc6a1bf3fd82a78374df ]
sctp_vrf.sh could fail:
TEST 12: bind vrf-2 & 1 in server, connect from client 1 & 2, N [FAIL]
not ok 1 selftests: net: sctp_vrf.sh # exit=3
The failure happens when the server bind in a new run conflicts with an
existing association from the previous run:
[1] ip netns exec $SERVER_NS ./sctp_hello server ...
[2] ip netns exec $CLIENT_NS ./sctp_hello client ...
[3] ip netns exec $SERVER_NS pkill sctp_hello ...
[4] ip netns exec $SERVER_NS ./sctp_hello server ...
It occurs if the client in [2] sends a message and closes immediately.
With the message unacked, no SHUTDOWN is sent. Killing the server in [3]
triggers a SHUTDOWN the client also ignores due to the unacked message,
leaving the old association alive. This causes the bind at [4] to fail
until the message is acked and the client responds to a second SHUTDOWN
after the server’s T2 timer expires (3s).
This patch fixes the issue by preventing the client from sending data.
Instead, the client blocks on recv() and waits for the server to close.
It also waits until both the server and the client sockets are fully
released in stop_server and wait_client before restarting.
Additionally, replace 2>&1 >/dev/null with -q in sysctl and grep, and
drop other redundant 2>&1 >/dev/null redirections, and fix a typo from
N to Y (connect successfully) in the description of the last test.
Fixes: a61bd7b9fe ("selftests: add a selftest for sctp vrf")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Tested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/be2dacf52d0917c4ba5e2e8c5a9cb640740ad2b6.1760731574.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90e271f65ee428ae5a75e783f5ba50a10dece09d ]
Here is the test result after conversion.
]# ./sctp_vrf.sh
Testing For SCTP VRF:
TEST 01: nobind, connect from client 1, l3mdev_accept=1, Y [PASS]
...
TEST 12: bind vrf-2 & 1 in server, connect from client 1 & 2, N [PASS]
***v6 Tests Done***
Acked-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: a73ca0449bcb ("selftests: net: fix server bind failure in sctp_vrf.sh")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c1999ed33722f85476a248186d6e0eb2bf3dd2a ]
test_parse_test_list_file writes some data to
/tmp/bpf_arg_parsing_test.XXXXXX and parse_test_list_file() will read
the data back. However, after writing data to that file, we forget to
call fsync() and it's causing testing failure in my laptop. This patch
helps fix it by adding the missing fsync() call.
Fixes: 64276f01dc ("selftests/bpf: Test_progs can read test lists from file")
Signed-off-by: Xing Guo <higuoxing@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251016035330.3217145-1-higuoxing@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e603a342cf7ecd64ef8f36207dfe1caacb9e2583 ]
We started getting a crash in BPF CI, which seems to originate from
test_parse_test_list_file() test and is happening at this line:
ASSERT_OK(strcmp("test_with_spaces", set.tests[0].name), "test 0 name");
One way we can crash there is if set.cnt zero, which is checked for with
ASSERT_EQ() above, but we proceed after this regardless of the outcome.
Instead of crashing, we should bail out with test failure early.
Similarly, if parse_test_list_file() fails, we shouldn't be even looking
at set, so bail even earlier if ASSERT_OK() fails.
Fixes: 64276f01dc ("selftests/bpf: Test_progs can read test lists from file")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20251014202037.72922-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 008385efd05e04d8dff299382df2e8be0f91d8a0 upstream.
The previous commit adds an exception for the C-flag case. The
'mptcp_join.sh' selftest is extended to validate this case.
In this subtest, there is a typical CDN deployment with a client where
MPTCP endpoints have been 'automatically' configured:
- the server set net.mptcp.allow_join_initial_addr_port=0
- the client has multiple 'subflow' endpoints, and the default limits:
not accepting ADD_ADDRs.
Without the parent patch, the client is not able to establish new
subflows using its 'subflow' endpoints. The parent commit fixes that.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: df377be387 ("mptcp: add deny_join_id0 in mptcp_options_received")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-2-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a001cd248ab244633c5fabe4f7c707e13fc1d1cc upstream.
Add "extern" to the glibc-defined weak rseq symbols to convert the rseq
selftest's usage from weak symbol definitions to weak symbol _references_.
Effectively re-defining the glibc symbols wreaks havoc when building with
-fno-common, e.g. generates segfaults when running multi-threaded programs,
as dynamically linked applications end up with multiple versions of the
symbols.
Building with -fcommon, which until recently has the been the default for
GCC and clang, papers over the bug by allowing the linker to resolve the
weak/tentative definition to glibc's "real" definition.
Note, the symbol itself (or rather its address), not the value of the
symbol, is set to 0/NULL for unresolved weak symbol references, as the
symbol doesn't exist and thus can't have a value. Check for a NULL rseq
size pointer to handle the scenario where the test is statically linked
against a libc that doesn't support rseq in any capacity.
Fixes: 3bcbc20942 ("selftests/rseq: Play nice with binaries statically linked against glibc 2.35+")
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Florian Weimer <fweimer@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/all/87frdoybk4.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9e6aa994917ee602798bbb03180a194b37865bb upstream.
devm_kcalloc() may fail. ndtest_probe() allocates three DMA address
arrays (dcr_dma, label_dma, dimm_dma) and later unconditionally uses
them in ndtest_nvdimm_init(), which can lead to a NULL pointer
dereference under low-memory conditions.
Check all three allocations and return -ENOMEM if any allocation fails,
jumping to the common error path. Do not emit an extra error message
since the allocator already warns on allocation failure.
Fixes: 9399ab61ad ("ndtest: Add dimms to the two buses")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e8cfc524eaf3c0ed88106177edb6961e202e6716 ]
Check if watchdog device supports WDIOF_KEEPALIVEPING option before
entering keep_alive() ping test loop. Fix watchdog-test silently looping
if ioctl based ping is not supported by the device. Exit from test in
such case instead of getting stuck in loop executing failing keep_alive()
watchdog_info:
identity: m41t93 rtc Watchdog
firmware_version: 0
Support/Status: Set timeout (in seconds)
Support/Status: Watchdog triggers a management or other external alarm not a reboot
Watchdog card disabled.
Watchdog timeout set to 5 seconds.
Watchdog ping rate set to 2 seconds.
Watchdog card enabled.
WDIOC_KEEPALIVE not supported by this device
without this change
Watchdog card disabled.
Watchdog timeout set to 5 seconds.
Watchdog ping rate set to 2 seconds.
Watchdog card enabled.
Watchdog Ticking Away!
(Where test stuck here forver silently)
Updated change log at commit time:
Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250914152840.GA3047348@bhairav-test.ee.iitb.ac.in
Fixes: d89d08ffd2 ("selftests: watchdog: Fix ioctl SET* error paths to take oneshot exit path")
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c80d79720647ed77ebc0198abd5a0807efdaff0b ]
Based on a bisect, it appears that commit 7ee988770326 ("timers:
Implement the hierarchical pull model") has somehow inadvertently
broken BPF selftest test_tcpnotify_user. The error that is being
generated by this test is as follows:
FAILED: Wrong stats Expected 10 calls, got 8
It looks like the change allows timer functions to be run on CPUs
different from the one they are armed on. The test had pinned itself
to CPU 0, and in the past the retransmit attempts also occurred on CPU
0. The test had set the max_entries attribute for
BPF_MAP_TYPE_PERF_EVENT_ARRAY to 2 and was calling
bpf_perf_event_output() with BPF_F_CURRENT_CPU, so the entry was
likely to be in range. With the change to allow timers to run on other
CPUs, the current CPU tasked with performing the retransmit might be
bumped and in turn fall out of range, as the event will be filtered
out via __bpf_perf_event_output() using:
if (unlikely(index >= array->map.max_entries))
return -E2BIG;
A possible change would be to explicitly set the max_entries attribute
for perf_event_map in test_tcpnotify_kern.c to a value that's at least
as large as the number of CPUs. As it turns out however, if the field
is left unset, then the libbpf will determine the number of CPUs available
on the underlying system and update the max_entries attribute accordingly
in map_set_def_max_entries().
A further problem with the test is that it has a thread that continues
running up until the program exits. The main thread cleans up some
LIBBPF data structures, while the other thread continues to use them,
which inevitably will trigger a SIGSEGV. This can be dealt with by
telling the thread to run for as long as necessary and doing a
pthread_join on it before exiting the program.
Finally, I don't think binding the process to CPU 0 is meaningful for
this test any more, so get rid of that.
Fixes: 435f90a338 ("selftests/bpf: add a test case for sock_ops perf-event notification")
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/aJ8kHhwgATmA3rLf@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a679e5683d3eef22ca12514ff8784b2b914ebedc ]
Fix -Wunused-result warning generated when compiled with gcc 13.3.0,
by checking fread's return value and handling errors, preventing
potential failures when reading from stdin.
Fixes compiler warning:
warning: ignoring return value of 'fread' declared with attribute
'warn_unused_result' [-Wunused-result]
Fixes: 806a15b254 ("kselftests/arm64: add PAuth test for whether exec() changes keys")
Signed-off-by: Bala-Vignesh-Reddy <reddybalavignesh9979@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a251f52cfdc417c84411a056bc142cbd77baef4 ]
This just standardizes the use of MIN() and MAX() macros, with the very
traditional semantics. The goal is to use these for C constant
expressions and for top-level / static initializers, and so be able to
simplify the min()/max() macros.
These macro names were used by various kernel code - they are very
traditional, after all - and all such users have been fixed up, with a
few different approaches:
- trivial duplicated macro definitions have been removed
Note that 'trivial' here means that it's obviously kernel code that
already included all the major kernel headers, and thus gets the new
generic MIN/MAX macros automatically.
- non-trivial duplicated macro definitions are guarded with #ifndef
This is the "yes, they define their own versions, but no, the include
situation is not entirely obvious, and maybe they don't get the
generic version automatically" case.
- strange use case #1
A couple of drivers decided that the way they want to describe their
versioning is with
#define MAJ 1
#define MIN 2
#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN)
which adds zero value and I just did my Alexander the Great
impersonation, and rewrote that pointless Gordian knot as
#define DRV_VERSION "1.2"
instead.
- strange use case #2
A couple of drivers thought that it's a good idea to have a random
'MIN' or 'MAX' define for a value or index into a table, rather than
the traditional macro that takes arguments.
These values were re-written as C enum's instead. The new
function-line macros only expand when followed by an open
parenthesis, and thus don't clash with enum use.
Happily, there weren't really all that many of these cases, and a lot of
users already had the pattern of using '#ifndef' guarding (or in one
case just using '#undef MIN') before defining their own private version
that does the same thing. I left such cases alone.
Cc: David Laight <David.Laight@aculab.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Eliav Farber <farbere@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c29913109c70383cdf90b6fc792353e1009f24f5 ]
The test creates non-FDB nexthops without a nexthop device which leads
to the expected failure, but for the wrong reason:
# ./fib_nexthops.sh -t "ipv6_fdb_grp_fcnal ipv4_fdb_grp_fcnal" -v
IPv6 fdb groups functional
--------------------------
[...]
COMMAND: ip -netns me-nRsN3E nexthop add id 63 via 2001:db8:91::4
Error: Device attribute required for non-blackhole and non-fdb nexthops.
COMMAND: ip -netns me-nRsN3E nexthop add id 64 via 2001:db8:91::5
Error: Device attribute required for non-blackhole and non-fdb nexthops.
COMMAND: ip -netns me-nRsN3E nexthop add id 103 group 63/64 fdb
Error: Invalid nexthop id.
TEST: Fdb Nexthop group with non-fdb nexthops [ OK ]
[...]
IPv4 fdb groups functional
--------------------------
[...]
COMMAND: ip -netns me-nRsN3E nexthop add id 14 via 172.16.1.2
Error: Device attribute required for non-blackhole and non-fdb nexthops.
COMMAND: ip -netns me-nRsN3E nexthop add id 15 via 172.16.1.3
Error: Device attribute required for non-blackhole and non-fdb nexthops.
COMMAND: ip -netns me-nRsN3E nexthop add id 103 group 14/15 fdb
Error: Invalid nexthop id.
TEST: Fdb Nexthop group with non-fdb nexthops [ OK ]
COMMAND: ip -netns me-nRsN3E nexthop add id 16 via 172.16.1.2 fdb
COMMAND: ip -netns me-nRsN3E nexthop add id 17 via 172.16.1.3 fdb
COMMAND: ip -netns me-nRsN3E nexthop add id 104 group 14/15
Error: Invalid nexthop id.
TEST: Non-Fdb Nexthop group with fdb nexthops [ OK ]
[...]
COMMAND: ip -netns me-0dlhyd ro add 172.16.0.0/22 nhid 15
Error: Nexthop id does not exist.
TEST: Route add with fdb nexthop [ OK ]
In addition, as can be seen in the above output, a couple of IPv4 test
cases used the non-FDB nexthops (14 and 15) when they intended to use
the FDB nexthops (16 and 17). These test cases only passed because
failure was expected, but they failed for the wrong reason.
Fix the test to create the non-FDB nexthops with a nexthop device and
adjust the IPv4 test cases to use the FDB nexthops instead of the
non-FDB nexthops.
Output after the fix:
# ./fib_nexthops.sh -t "ipv6_fdb_grp_fcnal ipv4_fdb_grp_fcnal" -v
IPv6 fdb groups functional
--------------------------
[...]
COMMAND: ip -netns me-lNzfHP nexthop add id 63 via 2001:db8:91::4 dev veth1
COMMAND: ip -netns me-lNzfHP nexthop add id 64 via 2001:db8:91::5 dev veth1
COMMAND: ip -netns me-lNzfHP nexthop add id 103 group 63/64 fdb
Error: FDB nexthop group can only have fdb nexthops.
TEST: Fdb Nexthop group with non-fdb nexthops [ OK ]
[...]
IPv4 fdb groups functional
--------------------------
[...]
COMMAND: ip -netns me-lNzfHP nexthop add id 14 via 172.16.1.2 dev veth1
COMMAND: ip -netns me-lNzfHP nexthop add id 15 via 172.16.1.3 dev veth1
COMMAND: ip -netns me-lNzfHP nexthop add id 103 group 14/15 fdb
Error: FDB nexthop group can only have fdb nexthops.
TEST: Fdb Nexthop group with non-fdb nexthops [ OK ]
COMMAND: ip -netns me-lNzfHP nexthop add id 16 via 172.16.1.2 fdb
COMMAND: ip -netns me-lNzfHP nexthop add id 17 via 172.16.1.3 fdb
COMMAND: ip -netns me-lNzfHP nexthop add id 104 group 16/17
Error: Non FDB nexthop group cannot have fdb nexthops.
TEST: Non-Fdb Nexthop group with fdb nexthops [ OK ]
[...]
COMMAND: ip -netns me-lNzfHP ro add 172.16.0.0/22 nhid 16
Error: Route cannot point to a fdb nexthop.
TEST: Route add with fdb nexthop [ OK ]
[...]
Tests passed: 30
Tests failed: 0
Tests skipped: 0
Fixes: 0534c5489c ("selftests: net: add fdb nexthop tests")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250921150824.149157-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 24733e193a0d68f20d220e86da0362460c9aa812 upstream.
The previous commit adds the MPTCP_PM_EV_FLAG_DENY_JOIN_ID0 flag. Make
sure it is correctly announced by the other peer when it has been
received.
pm_nl_ctl will now display 'deny_join_id0:1' when monitoring the events,
and when this flag was set by the other peer.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 702c2f646d ("mptcp: netlink: allow userspace-driven subflow establishment")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-pm-uspace-deny_join_id0-v1-3-40171884ade8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflict in userspace_pm.sh, because of a difference in the context,
introduced by commit c66fb480a330 ("selftests: userspace pm: avoid
relaunching pm events"), which is not in this version. The same lines
can still be added at the same place. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8708c5d8b3fb3f6d5d3b9e6bfe01a505819f519a upstream.
The disconnect test-case, with 'plain' TCP sockets generates spurious
errors, e.g.
07 ns1 TCP -> ns1 (dead:beef:1::1:10006) MPTCP
read: Connection reset by peer
read: Connection reset by peer
(duration 155ms) [FAIL] client exit code 3, server 3
netns ns1-FloSdv (listener) socket stat for 10006:
TcpActiveOpens 2 0.0
TcpPassiveOpens 2 0.0
TcpEstabResets 2 0.0
TcpInSegs 274 0.0
TcpOutSegs 276 0.0
TcpOutRsts 3 0.0
TcpExtPruneCalled 2 0.0
TcpExtRcvPruned 1 0.0
TcpExtTCPPureAcks 104 0.0
TcpExtTCPRcvCollapsed 2 0.0
TcpExtTCPBacklogCoalesce 42 0.0
TcpExtTCPRcvCoalesce 43 0.0
TcpExtTCPChallengeACK 1 0.0
TcpExtTCPFromZeroWindowAdv 42 0.0
TcpExtTCPToZeroWindowAdv 41 0.0
TcpExtTCPWantZeroWindowAdv 13 0.0
TcpExtTCPOrigDataSent 164 0.0
TcpExtTCPDelivered 165 0.0
TcpExtTCPRcvQDrop 1 0.0
In the failing scenarios (TCP -> MPTCP), the involved sockets are
actually plain TCP ones, as fallbacks for passive sockets at 2WHS time
cause the MPTCP listeners to actually create 'plain' TCP sockets.
Similar to commit 218cc166321f ("selftests: mptcp: avoid spurious errors
on disconnect"), the root cause is in the user-space bits: the test
program tries to disconnect as soon as all the pending data has been
spooled, generating an RST. If such option reaches the peer before the
connection has reached the closed status, the TCP socket will report an
error to the user-space, as per protocol specification, causing the
above failure. Note that it looks like this issue got more visible since
the "tcp: receiver changes" series from commit 06baf9bfa6ca ("Merge
branch 'tcp-receiver-changes'").
Address the issue by explicitly waiting for the TCP sockets (-t) to
reach a closed status before performing the disconnect. More precisely,
the test program now waits for plain TCP sockets or TCP subflows in
addition to the MPTCP sockets that were already monitored.
While at it, use 'ss' with '-n' to avoid resolving service names, which
is not needed here.
Fixes: 218cc166321f ("selftests: mptcp: avoid spurious errors on disconnect")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-3-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 14e22b43df25dbd4301351b882486ea38892ae4f upstream.
IO errors were correctly printed to stderr, and propagated up to the
main loop for the server side, but the returned value was ignored. As a
consequence, the program for the listener side was no longer exiting
with an error code in case of IO issues.
Because of that, some issues might not have been seen. But very likely,
most issues either had an effect on the client side, or the file
transfer was not the expected one, e.g. the connection got reset before
the end. Still, it is better to fix this.
The main consequence of this issue is the error that was reported by the
selftests: the received and sent files were different, and the MIB
counters were not printed. Also, when such errors happened during the
'disconnect' tests, the program tried to continue until the timeout.
Now when an IO error is detected, the program exits directly with an
error.
Fixes: 05be5e273c ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-fix-sft-connect-v1-2-d40e77cbbf02@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b86418beade11d45540a2d20c4ec1128849b6c27 ]
This patch fixes several issues in the error reporting of the MPTCP sockopt
selftest:
1. Fix diff not printed: The error messages for counter mismatches had
the actual difference ('diff') as argument, but it was missing in the
format string. Displaying it makes the debugging easier.
2. Fix variable usage: The error check for 'mptcpi_bytes_acked' incorrectly
used 'ret2' (sent bytes) for both the expected value and the difference
calculation. It now correctly uses 'ret' (received bytes), which is the
expected value for bytes_acked.
3. Fix off-by-one in diff: The calculation for the 'mptcpi_rcv_delta' diff
was 's.mptcpi_rcv_delta - ret', which is off-by-one. It has been
corrected to 's.mptcpi_rcv_delta - (ret + 1)' to match the expected
value in the condition above it.
Fixes: 5dcff89e14 ("selftests: mptcp: explicitly tests aggregate counters")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250912-net-mptcp-pm-uspace-deny_join_id0-v1-5-40171884ade8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd2004d82d8d8faa94879e3de3096c8511728637 ]
bind_bhash.c passes (SO_REUSEADDR | SO_REUSEPORT) to setsockopt().
In the asm-generic definition, the value happens to match with the
bare SO_REUSEPORT, (2 | 15) == 15, but not on some arch.
arch/alpha/include/uapi/asm/socket.h:18:#define SO_REUSEADDR 0x0004
arch/alpha/include/uapi/asm/socket.h:24:#define SO_REUSEPORT 0x0200
arch/mips/include/uapi/asm/socket.h:24:#define SO_REUSEADDR 0x0004 /* Allow reuse of local addresses. */
arch/mips/include/uapi/asm/socket.h:33:#define SO_REUSEPORT 0x0200 /* Allow local address and port reuse. */
arch/parisc/include/uapi/asm/socket.h:12:#define SO_REUSEADDR 0x0004
arch/parisc/include/uapi/asm/socket.h:18:#define SO_REUSEPORT 0x0200
arch/sparc/include/uapi/asm/socket.h:13:#define SO_REUSEADDR 0x0004
arch/sparc/include/uapi/asm/socket.h:20:#define SO_REUSEPORT 0x0200
include/uapi/asm-generic/socket.h:12:#define SO_REUSEADDR 2
include/uapi/asm-generic/socket.h:27:#define SO_REUSEPORT 15
Let's pass SO_REUSEPORT only.
Fixes: c35ecb95c4 ("selftests/net: Add test for timing a bind request to a port with a populated bhash entry")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250903222938.2601522-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 452690be7de2f91cc0de68cb9e95252875b33503 upstream.
This modification is linked to the parent commit where the received
ADD_ADDR limit was accidentally reset when the endpoints were flushed.
To validate that, the test is now flushing endpoints after having set
new limits, and before checking them.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-3-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Conflicts in pm_netlink.sh, because some refactoring have been done
later on: commit 3188309c8ceb ("selftests: mptcp: netlink:
add 'limits' helpers") and commit c99d57d0007a ("selftests: mptcp: use
pm_nl endpoint ops") are not in this version. The same operation can
still be done at the same place, without using the new helper. ]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5534e58f2e9bd72b253d033ee0af6e68eb8ac96b ]
When reg->type is CONST_PTR_TO_MAP, it can not be null. However the
verifier explores the branches under rX == 0 in check_cond_jmp_op()
even if reg->type is CONST_PTR_TO_MAP, because it was not checked for
in reg_not_null().
Fix this by adding CONST_PTR_TO_MAP to the set of types that are
considered non nullable in reg_not_null().
An old "unpriv: cmp map pointer with zero" selftest fails with this
change, because now early out correctly triggers in
check_cond_jmp_op(), making the verification to pass.
In practice verifier may allow pointer to null comparison in unpriv,
since in many cases the relevant branch and comparison op are removed
as dead code. So change the expected test result to __success_unpriv.
Signed-off-by: Ihor Solodrai <isolodrai@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250609183024.359974-2-isolodrai@meta.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
