* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
ocfs2: Fix system inodes cache overflow.
ocfs2: Hold ip_lock when set/clear flags for indexed dir.
ocfs2: Adjust masklog flag values
Ocfs2: Teach 'coherency=full' O_DIRECT writes to correctly up_read i_alloc_sem.
ocfs2/dlm: Migrate lockres with no locks if it has a reference
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: hda - Fix GPIO2-fixup for Sony laptops
ALSA: hda - Try to find an empty control index when it's occupied
ALSA: hda - Fix conflict of d-mic capture volume controls
ALSA: hda - Don't apply ALC269-specific initialization to ALC275
ALSA: hda - Add fix-up for Sony VAIO with ALC275 codecs
ALSA: pcm: remember to always call va_end() on stuff that we va_start()
ALSA: HDA: Add auto-mute for Thinkpad SL410/SL510
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (21 commits)
[media] mceusb: set a default rx timeout
[media] mceusb: fix inverted mask inversion logic
[media] mceusb: add another Fintek device ID
[media] lirc_dev: fixes in lirc_dev_fop_read()
[media] lirc_dev: stray unlock in lirc_dev_fop_poll()
[media] rc: fix sysfs entry for mceusb and streamzap
[media] streamzap: merge timeout space with trailing space
[media] mceusb: fix keybouce issue after parser simplification
[media] IR: add tv power scancode to rc6 mce keymap
[media] mceusb: buffer parsing fixups for 1st-gen device
[media] mceusb: fix up reporting of trailing space
[media] nuvoton-cir: improve buffer parsing responsiveness
[media] mceusb: add support for Conexant Hybrid TV RDU253S
[media] s5p-fimc: Fix output DMA handling in S5PV310 IP revisions
[media] s5p-fimc: Use correct fourcc code for 32-bit RGB format
[media] s5p-fimc: Convert m2m driver to unlocked_ioctl
[media] s5p-fimc: Explicitly add required header file
[media] s5p-fimc: Fix vidioc_g_crop/cropcap on camera sensor
[media] s5p-fimc: BKL lock removal - compilation fix
[media] soc-camera: fix static build of the sh_mobile_csi2.c driver
...
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf probe: Fix to support libdwfl older than 0.148
perf tools: Fix lazy wildcard matching
perf buildid-list: Fix error return for success
perf buildid-cache: Fix symbolic link handling
perf symbols: Stop using vmlinux files with no symbols
perf probe: Fix use of kernel image path given by 'k' option
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, kexec: Limit the crashkernel address appropriately
In construct_alloc_key(), up_write() is called in the error path if
__key_link_begin() fails, but this is incorrect as __key_link_begin() only
returns with the nominated keyring locked if it returns successfully.
Without this patch, you might see the following in dmesg:
=====================================
[ BUG: bad unlock balance detected! ]
-------------------------------------
mount.cifs/5769 is trying to release lock (&key->sem) at:
[<ffffffff81201159>] request_key_and_link+0x263/0x3fc
but there are no more locks to release!
other info that might help us debug this:
3 locks held by mount.cifs/5769:
#0: (&type->s_umount_key#41/1){+.+.+.}, at: [<ffffffff81131321>] sget+0x278/0x3e7
#1: (&ret_buf->session_mutex){+.+.+.}, at: [<ffffffffa0258e59>] cifs_get_smb_ses+0x35a/0x443 [cifs]
#2: (root_key_user.cons_lock){+.+.+.}, at: [<ffffffff81201000>] request_key_and_link+0x10a/0x3fc
stack backtrace:
Pid: 5769, comm: mount.cifs Not tainted 2.6.37-rc6+ #1
Call Trace:
[<ffffffff81201159>] ? request_key_and_link+0x263/0x3fc
[<ffffffff81081601>] print_unlock_inbalance_bug+0xca/0xd5
[<ffffffff81083248>] lock_release_non_nested+0xc1/0x263
[<ffffffff81201159>] ? request_key_and_link+0x263/0x3fc
[<ffffffff81201159>] ? request_key_and_link+0x263/0x3fc
[<ffffffff81083567>] lock_release+0x17d/0x1a4
[<ffffffff81073f45>] up_write+0x23/0x3b
[<ffffffff81201159>] request_key_and_link+0x263/0x3fc
[<ffffffffa026fe9e>] ? cifs_get_spnego_key+0x61/0x21f [cifs]
[<ffffffff812013c5>] request_key+0x41/0x74
[<ffffffffa027003d>] cifs_get_spnego_key+0x200/0x21f [cifs]
[<ffffffffa026e296>] CIFS_SessSetup+0x55d/0x1273 [cifs]
[<ffffffffa02589e1>] cifs_setup_session+0x90/0x1ae [cifs]
[<ffffffffa0258e7e>] cifs_get_smb_ses+0x37f/0x443 [cifs]
[<ffffffffa025a9e3>] cifs_mount+0x1aa1/0x23f3 [cifs]
[<ffffffff8111fd94>] ? alloc_debug_processing+0xdb/0x120
[<ffffffffa027002c>] ? cifs_get_spnego_key+0x1ef/0x21f [cifs]
[<ffffffffa024cc71>] cifs_do_mount+0x165/0x2b3 [cifs]
[<ffffffff81130e72>] vfs_kern_mount+0xaf/0x1dc
[<ffffffff81131007>] do_kern_mount+0x4d/0xef
[<ffffffff811483b9>] do_mount+0x6f4/0x733
[<ffffffff8114861f>] sys_mount+0x88/0xc2
[<ffffffff8100ac42>] system_call_fastpath+0x16/0x1b
Reported-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-Tested-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The default for non-READ_BACK GPIO regs is to have the clear bits set;
this means that our original errata fix was too simplistic. This
changes it to the following behavior:
- when setting GPIOs, ignore the higher order bits (they're for
clearing, we don't need to care about them).
- when clearing GPIOs, keep all the bits, but unset (via XOR) the
lower order bit that negates the clear bit that we care about. That
is, if we're clearing GPIO 26 (val = 0x04000000), we first XOR what's
currently in the register with 0x0400 (GPIO 26's SET bit), and then
OR that with the GPIO 26's CLEAR bit.
Tested-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The edge detect status GPIOs function differently from the other atomic
model CS5536 GPIO registers; writing 1 to the high bits clears the GPIO,
but writing 1 to the lower bits also clears the bit.
This means that read-modify-write doesn't actually work for it, so don't
apply the errata here. If a negative edge status gets lost after
resume.. well, we tried our best!
Tested-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
NUMA boot code assumes that physical node ids start at 0, but the DIMMs
that the apic id represents may not be reachable. If this is the case,
node 0 is never online and cpus never end up getting appropriately
assigned to a node. This causes the cpumask of all online nodes to be
empty and machines crash with kernel code assuming online nodes have
valid cpus.
The fix is to appropriately map all the address ranges for physical nodes
and ensure the cpu to node mapping function checks all possible nodes (up
to MAX_NUMNODES) instead of simply checking nodes 0-N, where N is the
number of physical nodes, for valid address ranges.
This requires no longer "compressing" the address ranges of nodes in the
physical node map from 0-N, but rather leave indices in physnodes[] to
represent the actual node id of the physical node. Accordingly, the
topology exported by both amd_get_nodes() and acpi_get_nodes() no longer
must return the number of nodes to iterate through; all such iterations
will now be to MAX_NUMNODES.
This change also passes the end address of system RAM (which may be
different from normal operation if mem= is specified on the command line)
before the physnodes[] array is populated. ACPI parsed nodes are
truncated to fit within the address range that respect the mem=
boundaries and even some physical nodes may become unreachable in such
cases.
When NUMA emulation does succeed, any apicid to node mapping that exists
for unreachable nodes are given default values so that proximity domains
can still be assigned. This is important for node_distance() to
function as desired.
Signed-off-by: David Rientjes <rientjes@google.com>
LKML-Reference: <alpine.DEB.2.00.1012221702090.3701@chino.kir.corp.google.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
It's necessary to fake the node-to-cpumask mapping so that an emulated
node ID returns a cpumask that includes all cpus that have affinity to
the memory it represents.
This is a little intrusive because it requires knowledge of the physical
topology of the system. setup_physnodes() gives us that information, but
since NUMA emulation ends up altering the physnodes array, it's necessary
to reset it before cpus are brought online.
Accordingly, the physnodes array is moved out of init.data and into
cpuinit.data since it will be needed on cpuup callbacks.
This works regardless of whether numa=fake is used on the command line,
or the setup of the fake node succeeds or fails. The physnodes array
always contains the physical topology of the machine if CONFIG_NUMA_EMU
is enabled and can be used to setup the correct node-to-cpumask mappings
in all cases since setup_physnodes() is called whenever the array needs
to be repopulated with the correct data.
To fake the actual mappings, numa_add_cpu() and numa_remove_cpu() are
rewritten for CONFIG_NUMA_EMU so that we first find the physical node to
which each cpu has local affinity, then iterate through all online nodes
to find the emulated nodes that have local affinity to that physical
node, and then finally map the cpu to each of those emulated nodes.
Signed-off-by: David Rientjes <rientjes@google.com>
LKML-Reference: <alpine.DEB.2.00.1012221701520.3701@chino.kir.corp.google.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
This patch adds the equivalent of acpi_fake_nodes() for AMD Northbridge
platforms. The goal is to fake the apicid-to-node mappings for NUMA
emulation so the physical topology of the machine is correctly maintained
within the kernel.
This change also fakes proximity domains for both ACPI and k8 code so the
physical distance between emulated nodes is maintained via
node_distance(). This exports the correct distances via
/sys/devices/system/node/.../distance based on the underlying topology.
A new helper function, fake_physnodes(), is introduced to correctly
invoke the correct NUMA code to fake these two mappings based on the
system type. If there is no underlying NUMA configuration, all cpus are
mapped to node 0 for local distance.
Since acpi_fake_nodes() is no longer called with CONFIG_ACPI_NUMA, it's
prototype can be removed from the header file for such a configuration.
Signed-off-by: David Rientjes <rientjes@google.com>
LKML-Reference: <alpine.DEB.2.00.1012221701360.3701@chino.kir.corp.google.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
This patch changes the minimum fake node size from 64MB to 32MB so it is
possible to test NUMA code at a greater scale on smaller machines
(64 nodes on a 2G machine, 1024 nodes on 32G machine with
CONFIG_NODES_SHIFT=10).
Signed-off-by: David Rientjes <rientjes@google.com>
LKML-Reference: <alpine.DEB.2.00.1012221700590.3701@chino.kir.corp.google.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
This patch changes u32 to __be32 for all "ranges", "prop" and "addr" and
such. Those variables are pointing to the device tree which contains
integers in big endian format.
Most functions are doing it right because of_read_number() is doing the
right thing for them. of_bus_isa_get_flags(), of_bus_pci_get_flags() and
of_bus_isa_map() were accessing the data directly and were doing it wrong.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
The semantics we employ now in the driver, performing a
BIG_HAMMER in the event of Get-ID (0x20) mailbox command
failing, should only be done for FC. On FC configurations, it
makes sense since advertising is only really performed once,
so a BIG_HAMMER to reinitiate the process is needed to
restart. Under FCoE, this is not needed, as there's a
continous stream of advertisements/ACks at the protocol layer
to initiate a relogin/reinitialization process.
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
For driver module parameters that have permission bits set to
(S_IRUGO|S_IRUSR), remove the second term since it is already
included in the first term.
S_IRUGO comes defined as (S_IRUSR|S_IRGRP|S_IROTH).
Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
The FCP priority info was not being updated properly in certain situations.
Here are the changes that needs to be done to take care of this issue:
1. No need to check fcport->state for FCS_UNCONFIGURED in
qla24xx_update_fcport_fcp_prio(), since an invalid loop id check is
already performed which is sufficient.
2. Add the missing qla24xx_update_fcport_fcp_prio() function call
within qla2x00_update_fcport() function, so that the priority info
is updated on every port addition or change.
3. Perform proper adapter types checking.
4. Other changes, associated with DEBUG/printk's and parameter passing.
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
This is just a cleanup.
The unneeded NULL check annoys static checkers because we already
derefenced it and the we check it and then (if it's not the _safe()
version) we dereference it again without checking. And the static
checker is all, "Wah? Is it null or not?"
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
This patch adds support for linking device tree blob(s) into
vmlinux. Modifies asm-generic/vmlinux.lds.h to add linking
.dtb sections into vmlinux. To maintain compatiblity with the of/fdt
driver code platforms MUST copy the blob to a non-init memory location
before the kernel frees the .init.* sections in the image.
Modifies scripts/Makefile.lib to add a kbuild command to
compile DTS files to device tree blobs and a rule to create objects to
wrap the blobs for linking.
STRUCT_ALIGNMENT is defined in vmlinux.lds.h for use in the rule to
create wrapper objects for the dtb in Makefile.lib. The
STRUCT_ALIGN() macro in vmlinux.lds.h is modified to use the
STRUCT_ALIGNMENT definition.
The DTB's are placed on 32 byte boundries to allow parsing the blob
with driver/of/fdt.c during early boot without having to copy the blob
to get the structure alignment GCC expects.
A DTB is linked in by adding the DTB object to the list of objects to
be linked into vmlinux in the archtecture specific Makefile using
obj-y += foo.dtb.o
Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com>
Acked-by: Michal Marek <mmarek@suse.cz>
[grant.likely@secretlab.ca: cleaned up whitespace inconsistencies]
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Support is added for quiescence mode. This feature is for P3P
adapters. Any of the functions can put the firmware into quiescence
state. All the others have to ack that request. During quiescence mode
current commands are processed and all the new incoming I/Os are
blocked. Loop resync is performed after firmware comes out of
quiescence state.
Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Recent Intel new system have different order in MADT, aka will list all thread0
at first, then all thread1.
But SRAT table still old order, it will list cpus in one socket all together.
If the user have compiled limited NR_CPUS or boot with nr_cpus=, could have missed
to put some cpus apic id to node mapping into apicid_to_node[].
for example for 4 sockets system with 64 cpus with nr_cpus=32 will get crash...
[ 9.106288] Total of 32 processors activated (136190.88 BogoMIPS).
[ 9.235021] divide error: 0000 [#1] SMP
[ 9.235315] last sysfs file:
[ 9.235481] CPU 1
[ 9.235592] Modules linked in:
[ 9.245398]
[ 9.245478] Pid: 2, comm: kthreadd Not tainted 2.6.37-rc1-tip-yh-01782-ge92ef79-dirty #274 /Sun Fire x4800
[ 9.265415] RIP: 0010:[<ffffffff81075a8f>] [<ffffffff81075a8f>] select_task_rq_fair+0x4f0/0x623
...
[ 9.645938] RIP [<ffffffff81075a8f>] select_task_rq_fair+0x4f0/0x623
[ 9.665356] RSP <ffff88103f8d1c40>
[ 9.665568] ---[ end trace 2296156d35fdfc87 ]---
So let just parse all cpu entries in SRAT.
Also add apicid checking with MAX_LOCAL_APIC, in case We could out of boundaries of
apicid_to_node[].
it fixes following bug too.
https://bugzilla.kernel.org/show_bug.cgi?id=22662
-v2: expand to 32bit according to hpa
need to add MAX_LOCAL_APIC for 32bit
Reported-and-Tested-by: Wu Fengguang <fengguang.wu@intel.com>
Reported-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Tested-by: Myron Stowe <myron.stowe@hp.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4D0AD486.9020704@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
We should use MAX_LOCAL_APIC for max apic ids and MAX_APICS as number
of local apics.
Also apic_version[] array should use MAX_LOCAL_APICs.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4D0AD464.2020408@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
I noticed that PCI Express PMEs don't work on my Toshiba Portege R500
after the system has been woken up from a sleep state by a PME
(through Wake-on-LAN). After some investigation it turned out that
the BIOS didn't clear the Root PME Status bit in the root port that
received the wakeup PME and since the Requester ID was also set in
the port's Root Status register, any subsequent PMEs didn't trigger
interrupts.
This problem can be avoided by clearing the Root PME Status bits in
all PCI Express root ports during early resume. For this purpose,
add an early resume routine to the PCIe port driver and make this
driver be always registered, even if pci_ports_disable is set (in
which case the driver's only function is to provide the early
resume callback).
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
pci-stub uses strsep() to separate list of ids and generates a warning
message when it fails to parse an id. However, not specifying the
parameter results in ids set to an empty string. strsep() happily
returns the empty string as the first token and thus triggers the
warning message spuriously.
Make the tokner ignore zero length ids.
Reported-by: Chris Wright <chrisw@sous-sol.org>
Reported-by: Prasad Joshi <P.G.Joshi@student.reading.ac.uk>
Cc: stable@kernel.org
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Will get warning when pci stub driver is built-in kenel like:
pci-stub: invalid id string ""
So stop early if no id is passed.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
pci_restore_state only ever returns 0, thus there is no benefit in
having it return any value. Also, a large majority of the callers do
not check the return code of pci_restore_state. Make the
pci_restore_state a void return and avoid the overhead.
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Jon Mason <jon.mason@exar.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
We currently refuse to touch the ASPM registers if the BIOS tells us that
ASPM isn't supported. This can cause problems if the BIOS has (for any
reason) enabled ASPM on some devices anyway. Change the code such that we
explicitly clear ASPM if the FADT indicates that ASPM isn't supported,
and make sure we tidy up appropriately on device removal in order to deal
with the hotplug case. If ASPM is disabled because the BIOS doesn't hand
over control then we won't touch the registers.
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
If pcie_ports_disabled is set, pcie_port_service_register() returns
error code and select_detection_mode() should not attempt to
unregister dummy_driver and use dummy_slots. It should return
PCIEHP_DETECT_ACPI immediately instead.
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Acked-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
commit fcf173e451
(add names for IRQs in structure resource)
forgot to take care of tusb6010 making it
fail to probe due to a missing resource.
Fix it.
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This reverts commit 4465b46900.
Conflicts:
net/ipv4/fib_frontend.c
As reported by Ben Greear, this causes regressions:
> Change 4465b46900 caused rules
> to stop matching the input device properly because the
> FLOWI_FLAG_MATCH_ANY_IIF is always defined in ip_dev_find().
>
> This breaks rules such as:
>
> ip rule add pref 512 lookup local
> ip rule del pref 0 lookup local
> ip link set eth2 up
> ip -4 addr add 172.16.0.102/24 broadcast 172.16.0.255 dev eth2
> ip rule add to 172.16.0.102 iif eth2 lookup local pref 10
> ip rule add iif eth2 lookup 10001 pref 20
> ip route add 172.16.0.0/24 dev eth2 table 10001
> ip route add unreachable 0/0 table 10001
>
> If you had a second interface 'eth0' that was on a different
> subnet, pinging a system on that interface would fail:
>
> [root@ct503-60 ~]# ping 192.168.100.1
> connect: Invalid argument
Reported-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
https://bugzilla.kernel.org/show_bug.cgi?id=25352
This regression was caused by commit a31437b85: "ext4: use
sb_issue_zeroout in setup_new_group_blocks", by accidentally dropping
the code which reserved the block group descriptor and inode table
blocks.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
- Connection ID (cid) management
- Slow-path command and response support
- Update version to 2.2.11.
Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The kcq2 (2nd kernel work queue) is used by FCoE on 57712 devices.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we get a path_resp error from userspace, call cm_connect_complete()
immediately with error so that bnx2i can react to the error faster.
Signed-off-by: Eddie Wai <waie@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
