Changes in 4.19.11
sched/pelt: Fix warning and clean up IRQ PELT config
scsi: raid_attrs: fix unused variable warning
staging: olpc_dcon: add a missing dependency
slimbus: ngd: mark PM functions as __maybe_unused
i2c: aspeed: fix build warning
ARM: dts: qcom-apq8064-arrow-sd-600eval fix graph_endpoint warning
drm/msm: fix address space warning
pinctrl: sunxi: a83t: Fix IRQ offset typo for PH11
aio: fix spectre gadget in lookup_ioctx
scripts/spdxcheck.py: always open files in binary mode
fs/iomap.c: get/put the page in iomap_page_create/release()
userfaultfd: check VM_MAYWRITE was set after verifying the uffd is registered
arm64: dma-mapping: Fix FORCE_CONTIGUOUS buffer clearing
block/bio: Do not zero user pages
ovl: fix decode of dir file handle with multi lower layers
ovl: fix missing override creds in link of a metacopy upper
MMC: OMAP: fix broken MMC on OMAP15XX/OMAP5910/OMAP310
mmc: core: use mrq->sbc when sending CMD23 for RPMB
mmc: sdhci-omap: Fix DCRC error handling during tuning
mmc: sdhci: fix the timeout check window for clock and reset
fuse: continue to send FUSE_RELEASEDIR when FUSE_OPEN returns ENOSYS
ARM: mmp/mmp2: fix cpu_is_mmp2() on mmp2-dt
ARM: dts: bcm2837: Fix polarity of wifi reset GPIOs
dm thin: send event about thin-pool state change _after_ making it
dm cache metadata: verify cache has blocks in blocks_are_clean_separate_dirty()
dm: call blk_queue_split() to impose device limits on bios
tracing: Fix memory leak in create_filter()
tracing: Fix memory leak in set_trigger_filter()
tracing: Fix memory leak of instance function hash filters
media: vb2: don't call __vb2_queue_cancel if vb2_start_streaming failed
powerpc/msi: Fix NULL pointer access in teardown code
powerpc: Look for "stdout-path" when setting up legacy consoles
drm/nouveau/kms: Fix memory leak in nv50_mstm_del()
drm/nouveau/kms/nv50-: also flush fb writes when rewinding push buffer
Revert "drm/rockchip: Allow driver to be shutdown on reboot/kexec"
drm/i915/gvt: Fix tiled memory decoding bug on BDW
drm/i915/execlists: Apply a full mb before execution for Braswell
drm/amdgpu/powerplay: Apply avfs cks-off voltages on VI
drm/amdkfd: add new vega10 pci ids
drm/amdgpu: add some additional vega10 pci ids
drm/amdgpu: update smu firmware images for VI variants (v2)
drm/amdgpu: update SMC firmware image for polaris10 variants
dm zoned: Fix target BIO completion handling
x86/build: Fix compiler support check for CONFIG_RETPOLINE
Linux 4.19.11
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Changes in 4.19.8
blk-mq: fix corruption with direct issue
test_hexdump: use memcpy instead of strncpy
unifdef: use memcpy instead of strncpy
iser: set sector for ambiguous mr status errors
uprobes: Fix handle_swbp() vs. unregister() + register() race once more
mtd: nand: Fix memory allocation in nanddev_bbt_init()
arm64: ftrace: Fix to enable syscall events on arm64
sched, trace: Fix prev_state output in sched_switch tracepoint
tracepoint: Use __idx instead of idx in DO_TRACE macro to make it unique
MIPS: ralink: Fix mt7620 nd_sd pinmux
mips: fix mips_get_syscall_arg o32 check
IB/mlx5: Avoid load failure due to unknown link width
tracing/fgraph: Fix set_graph_function from showing interrupts
drm/ast: Fix incorrect free on ioregs
drm/amd/dm: Don't forget to attach MST encoders
drm: set is_master to 0 upon drm_new_set_master() failure
drm/meson: Fixes for drm_crtc_vblank_on/off support
drm/meson: Enable fast_io in meson_dw_hdmi_regmap_config
drm/meson: Fix OOB memory accesses in meson_viu_set_osd_lut()
userfaultfd: use ENOENT instead of EFAULT if the atomic copy user fails
userfaultfd: shmem: allocate anonymous memory for MAP_PRIVATE shmem
userfaultfd: shmem: add i_size checks
userfaultfd: shmem: UFFDIO_COPY: set the page dirty if VM_WRITE is not set
kgdboc: Fix restrict error
kgdboc: Fix warning with module build
svm: Add mutex_lock to protect apic_access_page_done on AMD systems
selinux: add support for RTM_NEWCHAIN, RTM_DELCHAIN, and RTM_GETCHAIN
i40e: Fix deletion of MAC filters
scsi: lpfc: fix block guard enablement on SLI3 adapters
Input: xpad - quirk all PDP Xbox One gamepads
Input: synaptics - add PNP ID for ThinkPad P50 to SMBus
Input: matrix_keypad - check for errors from of_get_named_gpio()
Input: cros_ec_keyb - fix button/switch capability reports
Input: elan_i2c - add ELAN0620 to the ACPI table
Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15ARR
Input: elan_i2c - add support for ELAN0621 touchpad
btrfs: tree-checker: Don't check max block group size as current max chunk size limit is unreliable
ARC: change defconfig defaults to ARCv2
arc: [devboards] Add support of NFSv3 ACL
tipc: use destination length for copy string
blk-mq: punt failed direct issue to dispatch list
Linux 4.19.8
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 38c7b224ce upstream.
New versions of gcc reasonably warn about the odd pattern of
strncpy(p, q, strlen(q));
which really doesn't make sense: the strncpy() ends up being just a slow
and odd way to write memcpy() in this case.
There was a comment about _why_ the code used strncpy - to avoid the
terminating NUL byte, but memcpy does the same and avoids the warning.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changes in 4.19.7
mm/huge_memory: rename freeze_page() to unmap_page()
mm/huge_memory: splitting set mapping+index before unfreeze
mm/huge_memory: fix lockdep complaint on 32-bit i_size_read()
mm/khugepaged: collapse_shmem() stop if punched or truncated
mm/khugepaged: fix crashes due to misaccounted holes
mm/khugepaged: collapse_shmem() remember to clear holes
mm/khugepaged: minor reorderings in collapse_shmem()
mm/khugepaged: collapse_shmem() without freezing new_page
mm/khugepaged: collapse_shmem() do not crash on Compound
lan743x: Enable driver to work with LAN7431
lan743x: fix return value for lan743x_tx_napi_poll
net: don't keep lonely packets forever in the gro hash
net: gemini: Fix copy/paste error
net: thunderx: set tso_hdrs pointer to NULL in nicvf_free_snd_queue
packet: copy user buffers before orphan or clone
rapidio/rionet: do not free skb before reading its length
s390/qeth: fix length check in SNMP processing
usbnet: ipheth: fix potential recvmsg bug and recvmsg bug 2
net: thunderx: set xdp_prog to NULL if bpf_prog_add fails
net: skb_scrub_packet(): Scrub offload_fwd_mark
virtio-net: disable guest csum during XDP set
virtio-net: fail XDP set if guest csum is negotiated
net/dim: Update DIM start sample after each DIM iteration
tcp: defer SACK compression after DupThresh
net: phy: add workaround for issue where PHY driver doesn't bind to the device
tipc: fix lockdep warning during node delete
x86/speculation: Enable cross-hyperthread spectre v2 STIBP mitigation
x86/speculation: Apply IBPB more strictly to avoid cross-process data leak
x86/speculation: Propagate information about RSB filling mitigation to sysfs
x86/speculation: Add RETPOLINE_AMD support to the inline asm CALL_NOSPEC variant
x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support
x86/retpoline: Remove minimal retpoline support
x86/speculation: Update the TIF_SSBD comment
x86/speculation: Clean up spectre_v2_parse_cmdline()
x86/speculation: Remove unnecessary ret variable in cpu_show_common()
x86/speculation: Move STIPB/IBPB string conditionals out of cpu_show_common()
x86/speculation: Disable STIBP when enhanced IBRS is in use
x86/speculation: Rename SSBD update functions
x86/speculation: Reorganize speculation control MSRs update
sched/smt: Make sched_smt_present track topology
x86/Kconfig: Select SCHED_SMT if SMP enabled
sched/smt: Expose sched_smt_present static key
x86/speculation: Rework SMT state change
x86/l1tf: Show actual SMT state
x86/speculation: Reorder the spec_v2 code
x86/speculation: Mark string arrays const correctly
x86/speculataion: Mark command line parser data __initdata
x86/speculation: Unify conditional spectre v2 print functions
x86/speculation: Add command line control for indirect branch speculation
x86/speculation: Prepare for per task indirect branch speculation control
x86/process: Consolidate and simplify switch_to_xtra() code
x86/speculation: Avoid __switch_to_xtra() calls
x86/speculation: Prepare for conditional IBPB in switch_mm()
ptrace: Remove unused ptrace_may_access_sched() and MODE_IBRS
x86/speculation: Split out TIF update
x86/speculation: Prevent stale SPEC_CTRL msr content
x86/speculation: Prepare arch_smt_update() for PRCTL mode
x86/speculation: Add prctl() control for indirect branch speculation
x86/speculation: Enable prctl mode for spectre_v2_user
x86/speculation: Add seccomp Spectre v2 user space protection mode
x86/speculation: Provide IBPB always command line options
userfaultfd: shmem/hugetlbfs: only allow to register VM_MAYWRITE vmas
kvm: mmu: Fix race in emulated page table writes
kvm: svm: Ensure an IBPB on all affected CPUs when freeing a vmcb
KVM: nVMX/nSVM: Fix bug which sets vcpu->arch.tsc_offset to L1 tsc_offset
KVM: x86: Fix kernel info-leak in KVM_HC_CLOCK_PAIRING hypercall
KVM: LAPIC: Fix pv ipis use-before-initialization
KVM: X86: Fix scan ioapic use-before-initialization
KVM: VMX: re-add ple_gap module parameter
xtensa: enable coprocessors that are being flushed
xtensa: fix coprocessor context offset definitions
xtensa: fix coprocessor part of ptrace_{get,set}xregs
udf: Allow mounting volumes with incorrect identification strings
btrfs: Always try all copies when reading extent buffers
Btrfs: ensure path name is null terminated at btrfs_control_ioctl
Btrfs: fix rare chances for data loss when doing a fast fsync
Btrfs: fix race between enabling quotas and subvolume creation
btrfs: relocation: set trans to be NULL after ending transaction
PCI: layerscape: Fix wrong invocation of outbound window disable accessor
PCI: dwc: Fix MSI-X EP framework address calculation bug
PCI: Fix incorrect value returned from pcie_get_speed_cap()
arm64: dts: rockchip: Fix PCIe reset polarity for rk3399-puma-haikou.
x86/MCE/AMD: Fix the thresholding machinery initialization order
x86/fpu: Disable bottom halves while loading FPU registers
perf/x86/intel: Move branch tracing setup to the Intel-specific source file
perf/x86/intel: Add generic branch tracing check to intel_pmu_has_bts()
perf/x86/intel: Disallow precise_ip on BTS events
fs: fix lost error code in dio_complete
ALSA: wss: Fix invalid snd_free_pages() at error path
ALSA: ac97: Fix incorrect bit shift at AC97-SPSA control write
ALSA: control: Fix race between adding and removing a user element
ALSA: sparc: Fix invalid snd_free_pages() at error path
ALSA: hda: Add ASRock N68C-S UCC the power_save blacklist
ALSA: hda/realtek - Support ALC300
ALSA: hda/realtek - fix headset mic detection for MSI MS-B171
ALSA: hda/realtek - fix the pop noise on headphone for lenovo laptops
ALSA: hda/realtek - Add auto-mute quirk for HP Spectre x360 laptop
function_graph: Create function_graph_enter() to consolidate architecture code
ARM: function_graph: Simplify with function_graph_enter()
microblaze: function_graph: Simplify with function_graph_enter()
x86/function_graph: Simplify with function_graph_enter()
nds32: function_graph: Simplify with function_graph_enter()
powerpc/function_graph: Simplify with function_graph_enter()
sh/function_graph: Simplify with function_graph_enter()
sparc/function_graph: Simplify with function_graph_enter()
parisc: function_graph: Simplify with function_graph_enter()
riscv/function_graph: Simplify with function_graph_enter()
s390/function_graph: Simplify with function_graph_enter()
arm64: function_graph: Simplify with function_graph_enter()
MIPS: function_graph: Simplify with function_graph_enter()
function_graph: Make ftrace_push_return_trace() static
function_graph: Use new curr_ret_depth to manage depth instead of curr_ret_stack
function_graph: Have profiler use curr_ret_stack and not depth
function_graph: Move return callback before update of curr_ret_stack
function_graph: Reverse the order of pushing the ret_stack and the callback
binder: fix race that allows malicious free of live buffer
ext2: initialize opts.s_mount_opt as zero before using it
ext2: fix potential use after free
ASoC: intel: cht_bsw_max98090_ti: Add quirk for boards using pmc_plt_clk_0
ASoC: pcm186x: Fix device reset-registers trigger value
ARM: dts: rockchip: Remove @0 from the veyron memory node
dmaengine: at_hdmac: fix memory leak in at_dma_xlate()
dmaengine: at_hdmac: fix module unloading
staging: most: use format specifier "%s" in snprintf
staging: vchiq_arm: fix compat VCHIQ_IOC_AWAIT_COMPLETION
staging: mt7621-dma: fix potentially dereferencing uninitialized 'tx_desc'
staging: mt7621-pinctrl: fix uninitialized variable ngroups
staging: rtl8723bs: Fix incorrect sense of ether_addr_equal
staging: rtl8723bs: Add missing return for cfg80211_rtw_get_station
USB: usb-storage: Add new IDs to ums-realtek
usb: core: quirks: add RESET_RESUME quirk for Cherry G230 Stream series
Revert "usb: dwc3: gadget: skip Set/Clear Halt when invalid"
iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers
iio:st_magn: Fix enable device after trigger
lib/test_kmod.c: fix rmmod double free
mm: cleancache: fix corruption on missed inode invalidation
mm: use swp_offset as key in shmem_replace_page()
Drivers: hv: vmbus: check the creation_status in vmbus_establish_gpadl()
misc: mic/scif: fix copy-paste error in scif_create_remote_lookup
Linux 4.19.7
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Android has an unusual setup where the kernel needs to target
[arch]-linux-gnu to avoid Android userspace-specific flags and
optimizations, but AOSP doesn't ship a matching binutils.
Add a new variable CLANG_TRIPLE which can override the "-target" triple
used to compile the kernel, while using a different CROSS_COMPILE to
pick the binutils/gcc installation. For Android you'd do something
like:
export CLANG_TRIPLE=aarch64-linux-gnu-
export CROSS_COMPILE=aarch64-linux-android-
If you don't need something like this, leave CLANG_TRIPLE unset and it
will default to CROSS_COMPILE.
Change-Id: I85d63599c6ab8ed458071cdf9197d85b1f7f150b
Signed-off-by: Greg Hackmann <ghackmann@google.com>
[astrachan: Added a script to check for incorrectly falling back to the
default when CLANG_TRIPLE is unset]
Bug: 118439987
Bug: 120440614
Test: make CLANG_TRIPLE=x86_64-linux-gnu CC=clang
Signed-off-by: Alistair Strachan <astrachan@google.com>
[ Upstream commit 8ef14c2c41 ]
This reverts commit 6147b1cf19.
The reverted patch results in attempted write access to the source
repository, even if that repository is mounted read-only.
Output from "strace git status -uno --porcelain":
getcwd("/tmp/linux-test", 129) = 16
open("/tmp/linux-test/.git/index.lock", O_RDWR|O_CREAT|O_EXCL|O_CLOEXEC, 0666) =
-1 EROFS (Read-only file system)
While git appears to be able to handle this situation, a monitored
build environment (such as the one used for Chrome OS kernel builds)
may detect it and bail out with an access violation error. On top of
that, the attempted write access suggests that git _will_ write to the
file even if a build output directory is specified. Users may have the
reasonable expectation that the source repository remains untouched in
that situation.
Fixes: 6147b1cf19 ("scripts/setlocalversion: git: Make -dirty check more robust"
Cc: Genki Sky <sky@genki.is>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bbcde0a724 ]
Since commit b41d920acf ("kbuild: deb-pkg: split generating packaging
and build"), the build version of the kernel contained in a deb package
is too low by 1.
Prior to the bad commit, the kernel was built first, then the number
in .version file was read out, and written into the debian control file.
Now, the debian control file is created before the kernel is actually
compiled, which is causing the version number mismatch.
Let the mkdebian script pass KBUILD_BUILD_VERSION=${revision} to require
the build system to use the specified version number.
Fixes: b41d920acf ("kbuild: deb-pkg: split generating packaging and build")
Reported-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6f4d29df66 upstream.
Without this change the following happens when using Python3 (3.6.6):
$ echo "GPL-2.0" | python3 scripts/spdxcheck.py -
FAIL: 'str' object has no attribute 'decode'
Traceback (most recent call last):
File "scripts/spdxcheck.py", line 253, in <module>
parser.parse_lines(sys.stdin, args.maxlines, '-')
File "scripts/spdxcheck.py", line 171, in parse_lines
line = line.decode(locale.getpreferredencoding(False), errors='ignore')
AttributeError: 'str' object has no attribute 'decode'
So as the line is already a string, there is no need to decode it and
the line can be dropped.
/usr/bin/python on Arch is Python 3. So this would indeed be worth
going into 4.19.
Link: http://lkml.kernel.org/r/20181023070802.22558-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Joe Perches <joe@perches.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masahiro writes:
"Kbuild fixes for v4.19 (2nd)
- Fix warnings from recordmcount.pl when building with Clang
- Allow Clang to use GNU toolchains correctly
- Disable CONFIG_SAMPLES for UML to avoid build error"
* tag 'kbuild-fixes-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
samples: disable CONFIG_SAMPLES for UML
kbuild: allow to use GCC toolchain not in Clang search path
ftrace: Build with CPPFLAGS to get -Qunused-arguments
When building to record the mcount locations the kernel uses
KBUILD_CFLAGS but not KBUILD_CPPFLAGS. This means it lacks
-Qunused-arguments when building with clang, resulting in a lot of
noisy warnings.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Pulled kselftest fixes from Shuah:
"This Kselftest fixes update for 4.9-rc5 consists of:
-- fixes to build failures
-- fixes to add missing config files to increase test coverage
-- fixes to cgroup test and a new cgroup test for memory.oom.group"
Pull Kbuild fixes from Masahiro Yamada:
- make setlocalversion more robust about -dirty check
- loosen the pkg-config requirement for Kconfig
- change missing depmod to a warning from an error
- warn modules_install when System.map is missing
* tag 'kbuild-fixes-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: modules_install: warn when missing System.map file
kbuild: make missing $DEPMOD a Warning instead of an Error
kconfig: do not require pkg-config on make {menu,n}config
kconfig: remove a spurious self-assignment
scripts/setlocalversion: git: Make -dirty check more robust
If there is no System.map file for "make modules_install",
scripts/depmod.sh will silently exit with success, having done
nothing. Since this is an unexpected situation, change it to
report a Warning for the missing file. The behavior is not
changed except for the Warning message.
The (previous) silent success and new Warning can be reproduced
by:
$ make mrproper; make defconfig
$ make modules; make modules_install
and since System.map is produced by "make vmlinux", the steps
above omit producing the System.map file.
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Pull nds32 updates from Greentime Hu:
"Contained in here are the bug fixes, building error fixes and ftrace
support for nds32"
* tag 'nds32-for-linus-4.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux:
nds32: linker script: GCOV kernel may refers data in __exit
nds32: fix build error because of wrong semicolon
nds32: Fix a kernel panic issue because of wrong frame pointer access.
nds32: Only print one page of stack when die to prevent printing too much information.
nds32: Add macro definition for offset of lp register on stack
nds32: Remove the deprecated ABI implementation
nds32/stack: Get real return address by using ftrace_graph_ret_addr
nds32/ftrace: Support dynamic function graph tracer
nds32/ftrace: Support dynamic function tracer
nds32/ftrace: Add RECORD_MCOUNT support
nds32/ftrace: Support static function graph tracer
nds32/ftrace: Support static function tracer
nds32: Extract the checking and getting pointer to a macro
nds32: Clean up the coding style
nds32: Fix get_user/put_user macro expand pointer problem
nds32: Fix empty call trace
nds32: add NULL entry to the end of_device_id array
nds32: fix logic for module
If the kernel headers aren't installed we can't build all the tests.
Add a new make target rule 'khdr' in the file lib.mk to generate the
kernel headers and that gets include for every test-dir Makefile that
includes lib.mk If the testdir in turn have its own sub-dirs the
top_srcdir needs to be set to the linux-rootdir to be able to generate
the kernel headers.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
__ro_after_init is a specific __attribute__ that checkpatch does currently
not understand.
Add it to the known $Attribute types so that code that uses variables
declared with __ro_after_init are not thought to be a modifier type.
This appears as a defect in checkpatch output of code like:
static bool trust_cpu __ro_after_init = IS_ENABLED(CONFIG_RANDOM_TRUST_CPU);
[...]
if (trust_cpu && arch_init) {
where checkpatch reports:
ERROR: space prohibited after that '&&' (ctx:WxW)
if (trust_cpu && arch_init) {
Link: http://lkml.kernel.org/r/0fa8a2cb83ade4c525e18261ecf6cfede3015983.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When $DEPMOD is not found, only print a warning instead of exiting
with an error message and error status:
Warning: 'make modules_install' requires /sbin/depmod. Please install it.
This is probably in the kmod package.
Change the Error to a Warning because "not all build hosts for cross
compiling Linux are Linux systems and are able to provide a working
port of depmod, especially at the file patch /sbin/depmod."
I.e., "make modules_install" may be used to copy/install the
loadable modules files to a target directory on a build system and
then transferred to an embedded device where /sbin/depmod is run
instead of it being run on the build system.
Fixes: 934193a654 ("kbuild: verify that $DEPMOD is installed")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Cc: stable@vger.kernel.org
Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: Lucas De Marchi <lucas.de.marchi@gmail.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Chih-Wei Huang <cwhuang@linux.org.tw>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Meelis Roos reported a {menu,n}config regression:
"I have libncurses devel package installed in the default system
location (as do 99%+ on actual developers probably) and in this
case, pkg-config is useless. pkg-config is needed only when
libraries and headers are installed in non-default locations but
it is bad to require installation of pkg-config on all the machines
where make menuconfig would be possibly run."
For {menu,n}config, do not use pkg-config if it is not installed.
For {g,x}config, keep checking pkg-config since we really rely on it
for finding the installation paths of the required packages.
Fixes: 4ab3b80159 ("kconfig: check for pkg-config on make {menu,n,g,x}config")
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Meelis Roos <mroos@linux.ee>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Pull x86 fixes from Thomas Gleixner:
"Speculation:
- Make the microcode check more robust
- Make the L1TF memory limit depend on the internal cache physical
address space and not on the CPUID advertised physical address
space, which might be significantly smaller. This avoids disabling
L1TF on machines which utilize the full physical address space.
- Fix the GDT mapping for EFI calls on 32bit PTI
- Fix the MCE nospec implementation to prevent #GP
Fixes and robustness:
- Use the proper operand order for LSL in the VDSO
- Prevent NMI uaccess race against CR3 switching
- Add a lockdep check to verify that text_mutex is held in
text_poke() functions
- Repair the fallout of giving native_restore_fl() a prototype
- Prevent kernel memory dumps based on usermode RIP
- Wipe KASAN shadow stack before rewinding the stack to prevent false
positives
- Move the AMS GOTO enforcement to the actual build stage to allow
user API header extraction without a compiler
- Fix a section mismatch introduced by the on demand VDSO mapping
change
Miscellaneous:
- Trivial typo, GCC quirk removal and CC_SET/OUT() cleanups"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pti: Fix section mismatch warning/error
x86/vdso: Fix lsl operand order
x86/mce: Fix set_mce_nospec() to avoid #GP fault
x86/efi: Load fixmap GDT in efi_call_phys_epilog()
x86/nmi: Fix NMI uaccess race against CR3 switching
x86: Allow generating user-space headers without a compiler
x86/dumpstack: Don't dump kernel memory based on usermode RIP
x86/asm: Use CC_SET()/CC_OUT() in __gen_sigismember()
x86/alternatives: Lockdep-enforce text_mutex in text_poke*()
x86/entry/64: Wipe KASAN stack shadow before rewind_stack_do_exit()
x86/irqflags: Mark native_restore_fl extern inline
x86/build: Remove jump label quirk for GCC older than 4.5.2
x86/Kconfig: Fix trivial typo
x86/speculation/l1tf: Increase l1tf memory limit for Nehalem+
x86/spectre: Add missing family 6 check to microcode check
The self assignment was probably introduced by an automated code
refactoring in
commit 694c49a7c0 ("kconfig: drop localization support").
The issue was identified by a self-assign warning when running
make menuconfig with clang.
Fixes: 694c49a7c0 ("kconfig: drop localization support")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
$(git diff-index) relies on the index being refreshed. This refreshing
of the index used to happen, but was removed in cdf2bc632e
("scripts/setlocalversion on write-protected source tree", 2013-06-14)
due to issues with a read-only filesystem.
If the index is not refreshed, one runs into problems. E.g. as
described in [0], git stores the uid in its index, so even if just the
uid has changed (or git is tricked into thinking so), then we will
think the tree is dirty. So as in [1], if you package linux-git with a
system that uses fakeroot(1), you get a "-dirty" version. Unless you
manually $(git update-index --refresh) themselves.
The simplest solution seems to be $(git status --porcelain), with an
additional flag saying "ignore untracked files". It seems clearer
about what it does, and avoids issues regarding cached indexes and
writable filesystems, but still has stable output for scripting.
[0]: https://public-inbox.org/git/0190ae30-b6c8-2a8b-b1fb-fd9d84e6dfdf@oracle.com/
[1]: https://bbs.archlinux.org/viewtopic.php?id=236702
Signed-off-by: Genki Sky <sky@genki.is>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Pull gcc plugin fix from Kees Cook:
"Lift gcc test into Kconfig. This is for better behavior when the
kernel is built with Clang, reported by Stefan Agner"
* tag 'gcc-plugins-v4.19-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
gcc-plugins: Disable when building under Clang
Pull more Kbuild updates from Masahiro Yamada:
- add build_{menu,n,g,x}config targets for compile-testing Kconfig
- fix and improve recursive dependency detection in Kconfig
- fix parallel building of menuconfig/nconfig
- fix syntax error in clang-version.sh
- suppress distracting log from syncconfig
- remove obsolete "rpm" target
- remove VMLINUX_SYMBOL(_STR) macro entirely
- fix microblaze build with CONFIG_DYNAMIC_FTRACE
- move compiler test for dead code/data elimination to Kconfig
- rename well-known LDFLAGS variable to KBUILD_LDFLAGS
- misc fixes and cleanups
* tag 'kbuild-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: rename LDFLAGS to KBUILD_LDFLAGS
kbuild: pass LDFLAGS to recordmcount.pl
kbuild: test dead code/data elimination support in Kconfig
initramfs: move gen_initramfs_list.sh from scripts/ to usr/
vmlinux.lds.h: remove stale <linux/export.h> include
export.h: remove VMLINUX_SYMBOL() and VMLINUX_SYMBOL_STR()
Coccinelle: remove pci_alloc_consistent semantic to detect in zalloc-simple.cocci
kbuild: make sorting initramfs contents independent of locale
kbuild: remove "rpm" target, which is alias of "rpm-pkg"
kbuild: Fix LOADLIBES rename in Documentation/kbuild/makefiles.txt
kconfig: suppress "configuration written to .config" for syncconfig
kconfig: fix "Can't open ..." in parallel build
kbuild: Add a space after `!` to prevent parsing as file pattern
scripts: modpost: check memory allocation results
kconfig: improve the recursive dependency report
kconfig: report recursive dependency involving 'imply'
kconfig: error out when seeing recursive dependency
kconfig: add build-only configurator targets
scripts/dtc: consolidate include path options in Makefile
Commit a0f97e06a4 ("kbuild: enable 'make CFLAGS=...' to add
additional options to CC") renamed CFLAGS to KBUILD_CFLAGS.
Commit 222d394d30 ("kbuild: enable 'make AFLAGS=...' to add
additional options to AS") renamed AFLAGS to KBUILD_AFLAGS.
Commit 06c5040cdb ("kbuild: enable 'make CPPFLAGS=...' to add
additional options to CPP") renamed CPPFLAGS to KBUILD_CPPFLAGS.
For some reason, LDFLAGS was not renamed.
Using a well-known variable like LDFLAGS may result in accidental
override of the variable.
Kbuild generally uses KBUILD_ prefixed variables for the internally
appended options, so here is one more conversion to sanitize the
naming convention.
I did not touch Makefiles under tools/ since the tools build system
is a different world.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Since commit 0fbe9a245c ("microblaze: add endianness options to
LDFLAGS instead of LD"), you cannot build the kernel for microblaze
with CONFIG_DYNAMIC_FTRACE.
Fixes: 0fbe9a245c ("microblaze: add endianness options to LDFLAGS instead of LD")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Prior to doing compiler feature detection in Kconfig, attempts to build
GCC plugins with Clang would fail the build, much in the same way missing
GCC plugin headers would fail the build. However, now that this logic
has been lifted into Kconfig, add an explicit test for GCC (instead of
duplicating it in the feature-test script).
Reported-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Multiple line macro definitions where the arguments are separated by line
continuations can cause checkpatch to emit invalid syntax regex tests.
This can occur when a single argument is modified in a part of a patch.
For example: (to not add a diff in the commit message)
$ ./scripts/checkpatch.pl --git db023296f0
Unterminated \g... pattern in regex; <very long regex omitted>
And, the test does not work correctly when these arguments are all new as
the initial patch line addition "+" is used in the argument name.
Fix this by stripping the line continuations and any "+" from the list of
arguments.
Link: http://lkml.kernel.org/r/86cdb43a4db70670c102020093f7fb4eb3003e01.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
checkpatch repeatedly uses a runtime minimum version check that validates
the minimum perl version required for a regex match by using a "$^V ge
5.10.0" runtime string match.
Only perform that minimum version test once and store the result to reduce
string matching time.
This reduces runtime execution time for patches or files with high line
counts.
An example runtime improvement:
new: $ time ./scripts/checkpatch.pl -f drivers/net/ethernet/intel/i40e/i40e_main.c > /dev/null
real 0m11.856s
user 0m11.831s
sys 0m0.025s
old: $ time ./scripts/checkpatch.pl -f drivers/net/ethernet/intel/i40e/i40e_main.c > /dev/null
real 0m13.330s
user 0m13.282s
sys 0m0.049s
Link: http://lkml.kernel.org/r/db21aa9703833bad65ab70cc4e8a78da5b399138.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A struct with a bool member can have different sizes on various
architectures because neither bool size nor alignment is standardized.
So emit a message on the use of bool in structs only in .h files and not
.c files.
There is the real possibility that this test could have a false positive
when a bool is declared as an automatic, so limit the test to .h files
where the only false positive is for declarations in static inline
functions.
Link: http://lkml.kernel.org/r/95477c93db187bab6da8a8ba7c57836868446179.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is an external use case for multiple private MAINTAINER style files
in a separate directory. Allow it.
--mpath has a default of "./MAINTAINERS".
The value entered can be either a file or a directory.
The behaviors are now:
--mpath <file> Read only the specific file as <MAINTAINER_TYPE> file
--mpath <directory> Read all files in <directory> as <MAINTAINER_TYPE> files
--mpath <directory> --find-maintainer-files
Recurse through <directory> and read all files named MAINTAINERS
Link: http://lkml.kernel.org/r/991b2f20112d53863cd79e61d908f1d26d3e1971.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
