[ Upstream commit 8f0916c6dc ]
ethtool user spaces needs to know ring count via ETHTOOL_GRXRINGS when
executing (ethtool -x) which is retrieved via ethtool get_rxnfc callback,
in mlx5 this callback is disabled when CONFIG_MLX5_EN_RXNFC=n.
This patch allows only ETHTOOL_GRXRINGS command on mlx5e_get_rxnfc() when
CONFIG_MLX5_EN_RXNFC is disabled, so ethtool -x will continue working.
Fixes: fe6d86b3c3 ("net/mlx5e: Add CONFIG_MLX5_EN_RXNFC for ethtool rx nfc")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bad861f31b ]
mlxfw can be compiled as external module while mlx5_core can be
builtin, in such case mlx5 will act like mlxfw is disabled.
Since mlxfw is just a service library for mlx* drivers,
imply it in mlx5_core to make it always reachable if it was enabled.
Fixes: 3ffaabecd1 ("net/mlx5e: Support the flash device ethtool callback")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0fe9f173d6 ]
Jiri reported that with a kernel built with CONFIG_FIXED_PHY=y,
CONFIG_NET_DSA=m and CONFIG_NET_DSA_LOOP=m, we would not get to a
functional state where the mock-up driver is registered. Turns out that
we are not descending into drivers/net/dsa/ unconditionally, and we
won't be able to link-in dsa_loop_bdinfo.o which does the actual mock-up
mdio device registration.
Reported-by: Jiri Pirko <jiri@resnulli.us>
Fixes: 40013ff20b ("net: dsa: Fix functional dsa-loop dependency on FIXED_PHY")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Tested-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c4703ce11c upstream.
Users have reported intermittent occurrences of DIMM initialization
failures due to duplicate allocations of address capacity detected in
the labels, or errors of the form below, both have the same root cause.
nd namespace1.4: failed to track label: 0
WARNING: CPU: 17 PID: 1381 at drivers/nvdimm/label.c:863
RIP: 0010:__pmem_label_update+0x56c/0x590 [libnvdimm]
Call Trace:
? nd_pmem_namespace_label_update+0xd6/0x160 [libnvdimm]
nd_pmem_namespace_label_update+0xd6/0x160 [libnvdimm]
uuid_store+0x17e/0x190 [libnvdimm]
kernfs_fop_write+0xf0/0x1a0
vfs_write+0xb7/0x1b0
ksys_write+0x57/0xd0
do_syscall_64+0x60/0x210
Unfortunately those reports were typically with a busy parallel
namespace creation / destruction loop making it difficult to see the
components of the bug. However, Jane provided a simple reproducer using
the work-in-progress sub-section implementation.
When ndctl is reconfiguring a namespace it may take an existing defunct
/ disabled namespace and reconfigure it with a new uuid and other
parameters. Critically namespace_update_uuid() takes existing address
resources and renames them for the new namespace to use / reconfigure as
it sees fit. The bug is that this rename only happens in the resource
tracking tree. Existing labels with the old uuid are not reaped leading
to a scenario where multiple active labels reference the same span of
address range.
Teach namespace_update_uuid() to flag any references to the old uuid for
reaping at the next label update attempt.
Cc: <stable@vger.kernel.org>
Fixes: bf9bccc14c ("libnvdimm: pmem label sets and namespace instantiation")
Link: https://github.com/pmem/ndctl/issues/91
Reported-by: Jane Chu <jane.chu@oracle.com>
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Reported-by: Erwin Tsaur <erwin.tsaur@oracle.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f91253a3d0 upstream.
The Linux kernel will auto-disables all boot consoles whenever it
gets a preferred real console.
Currently on RISC-V systems, if we have a real console which is not
RISCV SBI console then boot consoles (such as earlycon=sbi) are not
auto-disabled when a real console (ttyS0 or ttySIF0) is available.
This results in duplicate prints at boot-time after kernel starts
using real console (i.e. ttyS0 or ttySIF0) if "earlycon=" kernel
parameter was passed by bootloader.
The reason for above issue is that RISCV SBI console always adds
itself as preferred console which is causing other real consoles
to be not used as preferred console.
Ideally "console=" kernel parameter passed by bootloaders should
be the one selecting a preferred real console.
This patch fixes above issue by not forcing RISCV SBI console as
preferred console.
Fixes: afa6b1ccfa ("tty: New RISC-V SBI console driver")
Cc: stable@vger.kernel.org
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 55be8658c7 upstream.
According to ipmi spec, block number is a number that is incremented,
starting with 0, for each new block of message data returned using the
middle transaction.
Here, the 'blocknum' is data[0] which always starts from zero(0) and
'ssif_info->multi_pos' starts from 1.
So, we need to add +1 to blocknum while comparing with multi_pos.
Fixes: 7d6380cd40 ("ipmi:ssif: Fix handling of multi-part return messages").
Reported-by: Kiran Kolukuluru <kirank@ami.com>
Signed-off-by: Kamlakant Patel <kamlakantp@marvell.com>
Message-Id: <1556106615-18722-1-git-send-email-kamlakantp@marvell.com>
[Also added a debug log if the block numbers don't match.]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org # 4.4
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1bee2addc0 upstream.
In journal_reclaim() ja->cur_idx of each cache will be update to
reclaim available journal buckets. Variable 'int n' is used to count how
many cache is successfully reclaimed, then n is set to c->journal.key
by SET_KEY_PTRS(). Later in journal_write_unlocked(), a for_each_cache()
loop will write the jset data onto each cache.
The problem is, if all jouranl buckets on each cache is full, the
following code in journal_reclaim(),
529 for_each_cache(ca, c, iter) {
530 struct journal_device *ja = &ca->journal;
531 unsigned int next = (ja->cur_idx + 1) % ca->sb.njournal_buckets;
532
533 /* No space available on this device */
534 if (next == ja->discard_idx)
535 continue;
536
537 ja->cur_idx = next;
538 k->ptr[n++] = MAKE_PTR(0,
539 bucket_to_sector(c, ca->sb.d[ja->cur_idx]),
540 ca->sb.nr_this_dev);
541 }
542
543 bkey_init(k);
544 SET_KEY_PTRS(k, n);
If there is no available bucket to reclaim, the if() condition at line
534 will always true, and n remains 0. Then at line 544, SET_KEY_PTRS()
will set KEY_PTRS field of c->journal.key to 0.
Setting KEY_PTRS field of c->journal.key to 0 is wrong. Because in
journal_write_unlocked() the journal data is written in following loop,
649 for (i = 0; i < KEY_PTRS(k); i++) {
650-671 submit journal data to cache device
672 }
If KEY_PTRS field is set to 0 in jouranl_reclaim(), the journal data
won't be written to cache device here. If system crahed or rebooted
before bkeys of the lost journal entries written into btree nodes, data
corruption will be reported during bcache reload after rebooting the
system.
Indeed there is only one cache in a cache set, there is no need to set
KEY_PTRS field in journal_reclaim() at all. But in order to keep the
for_each_cache() logic consistent for now, this patch fixes the above
problem by not setting 0 KEY_PTRS of journal key, if there is no bucket
available to reclaim.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 75ddbc1fb1 upstream.
Previously, in the userspace, it was possible to use the "setterm" command
from util-linux to blank the VT console by default, using the following
command.
According to the man page,
> The force option keeps the screen blank even if a key is pressed.
It was implemented by calling TIOCL_BLANKSCREEN.
case BLANKSCREEN:
ioctlarg = TIOCL_BLANKSCREEN;
if (ioctl(STDIN_FILENO, TIOCLINUX, &ioctlarg))
warn(_("cannot force blank"));
break;
However, after Linux 4.12, this command ceased to work anymore, which is
unexpected. By inspecting the kernel source, it shows that the issue was
triggered by the side-effect from commit a4199f5eb8 ("tty: Disable
default console blanking interval").
The console blanking is implemented by function do_blank_screen() in vt.c:
"blank_state" will be initialized to "blank_normal_wait" in con_init() if
AND ONLY IF ("blankinterval" > 0). If "blankinterval" is 0, "blank_state"
will be "blank_off" (== 0), and a call to do_blank_screen() will always
abort, even if a forced blanking is required from the user by calling
TIOCL_BLANKSCREEN, the console won't be blanked.
This behavior is unexpected from a user's point-of-view, since it's not
mentioned in any documentation. The setterm man page suggests it will
always work, and the kernel comments in uapi/linux/tiocl.h says
> /* keep screen blank even if a key is pressed */
> #define TIOCL_BLANKSCREEN 14
To fix it, we simply remove the "blank_state != blank_off" check, as
pointed out by Nicolas Pitre, this check doesn't logically make sense
and it's safe to remove.
Suggested-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Fixes: a4199f5eb8 ("tty: Disable default console blanking interval")
Signed-off-by: Yifeng Li <tomli@tomli.me>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b75ebeea6 upstream.
It was observed that reads crossing 4K address boundary are failing.
This limitation is mentioned in Intel documents:
Intel(R) 9 Series Chipset Family Platform Controller Hub (PCH) Datasheet:
"5.26.3 Flash Access
Program Register Access:
* Program Register Accesses are not allowed to cross a 4 KB boundary..."
Enhanced Serial Peripheral Interface (eSPI)
Interface Base Specification (for Client and Server Platforms):
"5.1.4 Address
For other memory transactions, the address may start or end at any byte
boundary. However, the address and payload length combination must not
cross the naturally aligned address boundary of the corresponding Maximum
Payload Size. It must not cross a 4 KB address boundary."
Avoid this by splitting an operation crossing the boundary into two
operations.
Fixes: 8afda8b26d ("spi-nor: Add support for Intel SPI serial flash controller")
Cc: stable@vger.kernel.org
Reported-by: Romain Porte <romain.porte@nokia.com>
Tested-by: Pascal Fabreges <pascal.fabreges@nokia.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2f844b61db upstream.
I noticed that recently multiple systems (chromebooks) couldn't wake
from S0ix using LID or Keyboard after updating to a newer kernel. I
bisected and it turned up commit f941d3e41d ("ACPI: EC / PM: Disable
non-wakeup GPEs for suspend-to-idle"). I checked that the issue got
fixed if that commit was reverted.
I debugged and found that although PNP0C0D:00 (representing the LID)
is wake capable and should wakeup the system per the code in
acpi_wakeup_gpe_init() and in drivers/acpi/button.c:
localhost /sys # cat /proc/acpi/wakeup
Device S-state Status Sysfs node
LID0 S4 *enabled platform:PNP0C0D:00
CREC S5 *disabled platform:GOOG0004:00
*disabled platform:cros-ec-dev.1.auto
*disabled platform:cros-ec-accel.0
*disabled platform:cros-ec-accel.1
*disabled platform:cros-ec-gyro.0
*disabled platform:cros-ec-ring.0
*disabled platform:cros-usbpd-charger.2.auto
*disabled platform:cros-usbpd-logger.3.auto
D015 S3 *enabled i2c:i2c-ELAN0000:00
PENH S3 *enabled platform:PRP0001:00
XHCI S3 *enabled pci:0000:00:14.0
GLAN S4 *disabled
WIFI S3 *disabled pci:0000:00:14.3
localhost /sys #
On debugging, I found that its corresponding GPE is not being enabled.
The particular GPE's "gpe_register_info->enable_for_wake" does not
have any bits set when acpi_enable_all_wakeup_gpes() comes around to
use it. I looked at code and could not find any other code path that
should set the bits in "enable_for_wake" bitmask for the wake enabled
devices for s2idle. [I do see that it happens for S3 in
acpi_sleep_prepare()].
Thus I used the same call to enable the GPEs for wake enabled devices,
and verified that this fixes the regression I was seeing on multiple
of my devices.
[ rjw: The problem is that commit f941d3e41d ("ACPI: EC / PM:
Disable non-wakeup GPEs for suspend-to-idle") forgot to add
the acpi_enable_wakeup_devices() call for s2idle along with
acpi_enable_all_wakeup_gpes(). ]
Fixes: f941d3e41d ("ACPI: EC / PM: Disable non-wakeup GPEs for suspend-to-idle")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203579
Signed-off-by: Rajat Jain <rajatja@google.com>
[ rjw: Subject & changelog ]
Cc: 5.0+ <stable@vger.kernel.org> # 5.0+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3499efbeed upstream.
During power management suspend the driver need to prepare the device
for the power down operation and as a last indication write to the
HOST_POWER_DOWN_EN register which signals to the hardware that
The ccree is ready for power down.
Signed-off-by: Ofir Drang <ofir.drang@arm.com>
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f3df82b468 upstream.
We were computing the size of the import buffer based on the digest size
but the 318 and 224 byte variants use 512 and 256 bytes internal state
sizes respectfully, thus causing the import buffer to overrun.
Fix it by using the right sizes.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c4b22bf51b upstream.
We were handling chained scattergather lists with specialized code
needlessly as the regular sg APIs handle them just fine. The code
handling this also had an (unused) code path with a use-before-init
error, flagged by Coverity.
Remove all special handling of chained sg and leave their handling
to the regular sg APIs.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dcf7b48212 upstream.
The original assembly imported from OpenSSL has two copy-paste
errors in handling CTR mode. When dealing with a 2 or 3 block tail,
the code branches to the CBC decryption exit path, rather than to
the CTR exit path.
This leads to corruption of the IV, which leads to subsequent blocks
being corrupted.
This can be detected with libkcapi test suite, which is available at
https://github.com/smuellerDD/libkcapi
Reported-by: Ondrej Mosnáček <omosnacek@gmail.com>
Fixes: 5c380d623e ("crypto: vmx - Add support for VMS instructions by ASM")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Axtens <dja@axtens.net>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Ondrej Mosnacek <omosnacek@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5a2aeb8b2 upstream.
Currently, we free the psp_master if the PLATFORM_INIT fails during the
SEV FW probe. If psp_master is freed then driver does not invoke the PSP
FW. As per SEV FW spec, there are several commands (PLATFORM_RESET,
PLATFORM_STATUS, GET_ID etc) which can be executed in the UNINIT state
We should not free the psp_master when PLATFORM_INIT fails.
Fixes: 200664d523 ("crypto: ccp: Add SEV support")
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Gary Hook <gary.hook@amd.com>
Cc: stable@vger.kernel.org # 4.19.y
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e92e1717e upstream.
Currently, crypto4xx CFB and OFB AES ciphers are
failing testmgr's test vectors.
|cfb-aes-ppc4xx encryption overran dst buffer on test vector 3, cfg="in-place"
|ofb-aes-ppc4xx encryption overran dst buffer on test vector 1, cfg="in-place"
This is because of a very subtile "bug" in the hardware that
gets indirectly mentioned in 18.1.3.5 Encryption/Decryption
of the hardware spec:
the OFB and CFB modes for AES are listed there as operation
modes for >>> "Block ciphers" <<<. Which kind of makes sense,
but we would like them to be considered as stream ciphers just
like the CTR mode.
To workaround this issue and stop the hardware from causing
"overran dst buffer" on crypttexts that are not a multiple
of 16 (AES_BLOCK_SIZE), we force the driver to use the scatter
buffers as the go-between.
As a bonus this patch also kills redundant pd_uinfo->num_gd
and pd_uinfo->num_sd setters since the value has already been
set before.
Cc: stable@vger.kernel.org
Fixes: f2a13e7cba ("crypto: crypto4xx - enable AES RFC3686, ECB, CFB and OFB offloads")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 25baaf8e2c upstream.
Commit 8efd972ef9 ("crypto: testmgr - support checking skcipher output IV")
caused the crypto4xx driver to produce the following error:
| ctr-aes-ppc4xx encryption test failed (wrong output IV)
| on test vector 0, cfg="in-place"
This patch fixes this by reworking the crypto4xx_setkey_aes()
function to:
- not save the iv for ECB (as per 18.2.38 CRYP0_SA_CMD_0:
"This bit mut be cleared for DES ECB mode or AES ECB mode,
when no IV is used.")
- instruct the hardware to save the generated IV for all
other modes of operations that have IV and then supply
it back to the callee in pretty much the same way as we
do it for cbc-aes already.
- make it clear that the DIR_(IN|OUT)BOUND is the important
bit that tells the hardware to encrypt or decrypt the data.
(this is cosmetic - but it hopefully prevents me from
getting confused again).
- don't load any bogus hash when we don't use any hash
operation to begin with.
Cc: stable@vger.kernel.org
Fixes: f2a13e7cba ("crypto: crypto4xx - enable AES RFC3686, ECB, CFB and OFB offloads")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9274c78305 upstream.
The ACEPC T8 and T11 Cherry Trail Z8350 mini PCs use an AXP288 and as PCs,
rather then portables, they does not have a battery. Still for some
reason the AXP288 not only thinks there is a battery, it actually
thinks it is discharging while the PC is running, slowly going to
0% full, causing userspace to shutdown the system due to the battery
being critically low after a while.
This commit adds the ACEPC T8 and T11 to the axp288 fuel-gauge driver
blacklist, so that we stop reporting bogus battery readings on this device.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1690852
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c3422ad5f8 upstream.
Currently there is no check on platform_get_irq() return value
in case it fails, hence never actually reporting any errors and
causing unexpected behavior when using such value as argument
for function regmap_irq_get_virq().
Fix this by adding a proper check, a message reporting any errors
and returning *pirq*
Addresses-Coverity-ID: 1443940 ("Improper use of negative value")
Fixes: 843735b788 ("power: axp288_charger: axp288 charger driver")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7bda9482e7 upstream.
Direct commands (DCMDs) are an optional feature of eMMC 5.1's command
queue engine (CQE). The Arasan eMMC 5.1 controller uses the CQHCI,
which exposes a control register bit to enable the feature.
The current implementation sets this bit unconditionally.
This patch allows to suppress the feature activation,
by specifying the property disable-cqe-dcmd.
Signed-off-by: Christoph Muellner <christoph.muellner@theobroma-systems.com>
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 84362d79f4 ("mmc: sdhci-of-arasan: Add CQHCI support for arasan,sdhci-5.1")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 340d455699 upstream.
When we hot-remove a device, usually the host sends us a PCI_EJECT message,
and a PCI_BUS_RELATIONS message with bus_rel->device_count == 0.
When we execute the quick hot-add/hot-remove test, the host may not send
us the PCI_EJECT message if the guest has not fully finished the
initialization by sending the PCI_RESOURCES_ASSIGNED* message to the
host, so it's potentially unsafe to only depend on the
pci_destroy_slot() in hv_eject_device_work() because the code path
create_root_hv_pci_bus()
-> hv_pci_assign_slots()
is not called in this case. Note: in this case, the host still sends the
guest a PCI_BUS_RELATIONS message with bus_rel->device_count == 0.
In the quick hot-add/hot-remove test, we can have such a race before
the code path
pci_devices_present_work()
-> new_pcichild_device()
adds the new device into the hbus->children list, we may have already
received the PCI_EJECT message, and since the tasklet handler
hv_pci_onchannelcallback()
may fail to find the "hpdev" by calling
get_pcichild_wslot(hbus, dev_message->wslot.slot)
hv_pci_eject_device() is not called; Later, by continuing execution
create_root_hv_pci_bus()
-> hv_pci_assign_slots()
creates the slot and the PCI_BUS_RELATIONS message with
bus_rel->device_count == 0 removes the device from hbus->children, and
we end up being unable to remove the slot in
hv_pci_remove()
-> hv_pci_remove_slots()
Remove the slot in pci_devices_present_work() when the device
is removed to address this race.
pci_devices_present_work() and hv_eject_device_work() run in the
singled-threaded hbus->wq, so there is not a double-remove issue for the
slot.
We cannot offload hv_pci_eject_device() from hv_pci_onchannelcallback()
to the workqueue, because we need the hv_pci_onchannelcallback()
synchronously call hv_pci_eject_device() to poll the channel
ringbuffer to work around the "hangs in hv_compose_msi_msg()" issue
fixed in commit de0aa7b2f9 ("PCI: hv: Fix 2 hang issues in
hv_compose_msi_msg()")
Fixes: a15f2c08c7 ("PCI: hv: support reporting serial number as slot information")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
[lorenzo.pieralisi@arm.com: rewritten commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 15becc2b56 upstream.
When we unload the pci-hyperv host controller driver, the host does not
send us a PCI_EJECT message.
In this case we also need to make sure the sysfs PCI slot directory is
removed, otherwise a command on a slot file eg:
"cat /sys/bus/pci/slots/2/address"
will trigger a
"BUG: unable to handle kernel paging request"
and, if we unload/reload the driver several times we would end up with
stale slot entries in PCI slot directories in /sys/bus/pci/slots/
root@localhost:~# ls -rtl /sys/bus/pci/slots/
total 0
drwxr-xr-x 2 root root 0 Feb 7 10:49 2
drwxr-xr-x 2 root root 0 Feb 7 10:49 2-1
drwxr-xr-x 2 root root 0 Feb 7 10:51 2-2
Add the missing code to remove the PCI slot and fix the current
behaviour.
Fixes: a15f2c08c7 ("PCI: hv: support reporting serial number as slot information")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
[lorenzo.pieralisi@arm.com: reformatted the log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Stephen Hemminger <sthemmin@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 05f151a73e upstream.
When a device is created in new_pcichild_device(), hpdev->refs is set
to 2 (i.e. the initial value of 1 plus the get_pcichild()).
When we hot remove the device from the host, in a Linux VM we first call
hv_pci_eject_device(), which increases hpdev->refs by get_pcichild() and
then schedules a work of hv_eject_device_work(), so hpdev->refs becomes
3 (let's ignore the paired get/put_pcichild() in other places). But in
hv_eject_device_work(), currently we only call put_pcichild() twice,
meaning the 'hpdev' struct can't be freed in put_pcichild().
Add one put_pcichild() to fix the memory leak.
The device can also be removed when we run "rmmod pci-hyperv". On this
path (hv_pci_remove() -> hv_pci_bus_exit() -> hv_pci_devices_present()),
hpdev->refs is 2, and we do correctly call put_pcichild() twice in
pci_devices_present_work().
Fixes: 4daace0d8c ("PCI: hv: Add paravirtual PCI front-end for Microsoft Hyper-V VMs")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
[lorenzo.pieralisi@arm.com: commit log rework]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9871a9e47a ]
When a queue(tfile) is detached through __tun_detach(), we move the
last enabled tfile to the position where detached one sit but don't
NULL out last position. We expect to synchronize the datapath through
tun->numqueues. Unfortunately, this won't work since we're lacking
sufficient mechanism to order or synchronize the access to
tun->numqueues.
To fix this, NULL out the last position during detaching and check
RCU protected tfile against NULL instead of checking tun->numqueues in
datapath.
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: weiyongjun (A) <weiyongjun1@huawei.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Fixes: c8d68e6be1 ("tuntap: multiqueue support")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a35d310f03 ]
We need check if tun->numqueues is zero (e.g for the persist device)
before trying to use it for modular arithmetic.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Fixes: 96f84061620c6("tun: add eBPF based queue selection method")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5afcd14cfc ]
The old MIPS implementation of dma_cache_sync() didn't use the dev argument,
but commit c9eb6172c3 ("dma-mapping: turn dma_cache_sync into a
dma_map_ops method") changed that, so we now need to set dev.parent.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0504453139 ]
Current order in open:
-> Enable interrupts (macb_init_hw)
-> Enable NAPI
-> Start PHY
Sequence of RX handling:
-> RX interrupt occurs
-> Interrupt is cleared and interrupt bits disabled in handler
-> NAPI is scheduled
-> In NAPI, RX budget is processed and RX interrupts are re-enabled
With the above, on QEMU or fixed link setups (where PHY state doesn't
matter), there's a chance macb RX interrupt occurs before NAPI is
enabled. This will result in NAPI being scheduled before it is enabled.
Fix this macb open by changing the order.
Fixes: ae1f2a56d2 ("net: macb: Added support for many RX queues")
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d4c26eb6e7 ]
When adding more MAC addresses to a dwmac-sun8i interface, the device goes
directly in promiscuous mode.
This is due to IFF_UNICAST_FLT missing flag.
So since the hardware support unicast filtering, let's add IFF_UNICAST_FLT.
Fixes: 9f93ac8d40 ("net-next: stmmac: Add dwmac-sun8i")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 17170e6570 ]
Fix issue with the entry indexing in the sg frame cleanup code being
off-by-1. This problem showed up when doing some basic iperf tests and
manifested in traffic coming to a halt.
Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Acked-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a9b8a2b39c ]
There's currently a problem with toggling arp_validate on and off with an
active-backup bond. At the moment, you can start up a bond, like so:
modprobe bonding mode=1 arp_interval=100 arp_validate=0 arp_ip_targets=192.168.1.1
ip link set bond0 down
echo "ens4f0" > /sys/class/net/bond0/bonding/slaves
echo "ens4f1" > /sys/class/net/bond0/bonding/slaves
ip link set bond0 up
ip addr add 192.168.1.2/24 dev bond0
Pings to 192.168.1.1 work just fine. Now turn on arp_validate:
echo 1 > /sys/class/net/bond0/bonding/arp_validate
Pings to 192.168.1.1 continue to work just fine. Now when you go to turn
arp_validate off again, the link falls flat on it's face:
echo 0 > /sys/class/net/bond0/bonding/arp_validate
dmesg
...
[133191.911987] bond0: Setting arp_validate to none (0)
[133194.257793] bond0: bond_should_notify_peers: slave ens4f0
[133194.258031] bond0: link status definitely down for interface ens4f0, disabling it
[133194.259000] bond0: making interface ens4f1 the new active one
[133197.330130] bond0: link status definitely down for interface ens4f1, disabling it
[133197.331191] bond0: now running without any active interface!
The problem lies in bond_options.c, where passing in arp_validate=0
results in bond->recv_probe getting set to NULL. This flies directly in
the face of commit 3fe68df97c, which says we need to set recv_probe =
bond_arp_recv, even if we're not using arp_validate. Said commit fixed
this in bond_option_arp_interval_set, but missed that we can get to that
same state in bond_option_arp_validate_set as well.
One solution would be to universally set recv_probe = bond_arp_recv here
as well, but I don't think bond_option_arp_validate_set has any business
touching recv_probe at all, and that should be left to the arp_interval
code, so we can just make things much tidier here.
Fixes: 3fe68df97c ("bonding: always set recv_probe to bond_arp_rcv in arp monitor")
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: netdev@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
