Rk3328 only have three windows, it's mistake add four windows.
Change-Id: I2a9495c6be407d12dbc9033f44a4cd6b2f54ff1a
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
In order to keep display not flash, we cheat all connectors status
as power on, but actually the connector's driver think it's off.
So when power off connector, we need correct connector's status first.
Change-Id: I9fa09d184197c71220d33666564876fc3b1212a7
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
fix display abnormal when enable uboot logo display
This reverts commit 6db46c9e7e.
Change-Id: I85b60c1b90bef939427bcbb795f7dcca490cec46
Signed-off-by: xuhuicong <xhc@rock-chips.com>
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Fix compatible of rga to "rockchip,rga2", and modify the clock names
to work fine with current driver.
Change-Id: Idfdae4f3bc2218472261546024b331c33bd3c270
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
This patch is only applicable to 3d frame packing
of progressive mode.
According to HDMI Specification 1.4b 8.2.3.2,
vertical toatal line is x2 of 2D vertical toatal line
and pixel clock frequency is x2 of 2D pixel clock frequency.
vdisplay += vtotal
mpixelclock *= 2
Change-Id: I097c25cd1a930635e33f0a7bc86797ad1c7ed607
Signed-off-by: algea.cao <algea.cao@rock-chips.com>
close pd when suspend, no when plug out because hotplug detect need it.
make hdmi probe before dp otherwise the shared power domain will be
close after dp probe and cause splash screen when starting kernel if
hdmi uboot logo display
Change-Id: I82ba1abdaf7567173df9ad900d57eca0e6be3932
Signed-off-by: xuhuicong <xhc@rock-chips.com>
vpll is just for dclk_vop.
Don't allow are other child under the VPLL.
Change-Id: I755348b4104b532c693c6874127a25721187a4ad
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
bit 7 of efuse value of temp ajust code indecates positive or negtive.
if bit 7 is set, it indecats a negtive ajust code.
Change-Id: I2b604b6b5e566df08b871c817cf25541292575bc
Signed-off-by: Rocky Hao <rocky.hao@rock-chips.com>
switching front and rear camera, maybe cause memory exhausted.
in this case, vpu driver must print a warning.
Change-Id: I60f3bfb662f42025624988a5a09ce7f69b358ea6
Signed-off-by: Jung Zhao <jung.zhao@rock-chips.com>
Add property 'mmc-hs200-1_8v' for emmc, to support hs200, and
remove the unused property caps2-mmc-hs200.
Change-Id: I9040d004bf78987d5bed7e49ad891c47a47970a9
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
iep drm support is similar with vcodec drm support. change the allocator
part from ion to drm.
Change-Id: I67c7ac795b768c85e80817262a947a20e9804ec8
Signed-off-by: Jung Zhao <jung.zhao@rock-chips.com>
RGA2_SYS_CTRL bit[6] a safe reset, it would be ensure all
axi write/read operation into completion
Change-Id: I39a5a6a9f10883d355c428e9dbaa89778682c49b
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
LSK 17.03 v4.4-android
* tag 'lsk-v4.4-17.03-android': (166 commits)
Linux 4.4.55
ext4: don't BUG when truncating encrypted inodes on the orphan list
dm: flush queued bios when process blocks to avoid deadlock
nfit, libnvdimm: fix interleave set cookie calculation
s390/kdump: Use "LINUX" ELF note name instead of "CORE"
KVM: s390: Fix guest migration for huge guests resulting in panic
mvsas: fix misleading indentation
serial: samsung: Continue to work if DMA request fails
USB: serial: io_ti: fix information leak in completion handler
USB: serial: io_ti: fix NULL-deref in interrupt callback
USB: iowarrior: fix NULL-deref in write
USB: iowarrior: fix NULL-deref at probe
USB: serial: omninet: fix reference leaks at open
USB: serial: safe_serial: fix information leak in completion handler
usb: host: xhci-plat: Fix timeout on removal of hot pluggable xhci controllers
usb: host: xhci-dbg: HCIVERSION should be a binary number
usb: gadget: function: f_fs: pass companion descriptor along
usb: dwc3: gadget: make Set Endpoint Configuration macros safe
usb: gadget: dummy_hcd: clear usb_gadget region before registration
powerpc: Emulation support for load/store instructions on LE
...
Change-Id: I4db95bbe5b2523e19ddf22b3f65863f7f6d46632
To set dw hdmi i2c bus adapter scl clock rate, we introduce two device
tree parameter, ddc-i2c-scl-high-time-ns and ddc-i2c-scl-low-time-ns.
ddc-i2c-scl-high-time-ns: how many ns SCL hold high
ddc-i2c-scl-low-time-ns: how many ns SCL hold low
After measurement, 50KHz scl clock rate recommended configuration is:
&hdmi {
ddc-i2c-scl-high-time-ns = <9625>;
ddc-i2c-scl-low-time-ns = <10000>;
};
100KHz recommended configuration is:
&hdmi {
ddc-i2c-scl-high-time-ns = <4708>;
ddc-i2c-scl-low-time-ns = <4916>;
};
If dts parameter is not available, the default scl rate is 100KHz.
Change-Id: I6f6b0bf1694ab59e70da789ead99e15a53c93e4d
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
This adds amend usb otg driver to support rk3328-evb board.
Change-Id: I152bedb64367ddf9c556e330b31c018f385c3fd7
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
100ms timeout is enough, 2 second timeout is too long.
Change-Id: I02f37280733dae307e81b417d9f3f547ba50259d
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
This adds force abnormal ohci relinquish port owner
and back to ehci on rk3288 SoC.
Change-Id: I33be55c08762be7e8a239f741a8c8dbb28522306
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
Add a quirk to support rockchip relinquishing port from abnormal ohci
to ehci when FS/LS devices plug in.
To support this function, the rockchip-relinquish-port property must be
specified in ehci node of dt.
Change-Id: I91b58905132282ef2a836d54a1c7ace1e334d119
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
This reverts commit 0fd1853df0.
We found this commit just work well for HS devices, however,
ehci_hub_control will set port owner to companion according line
status bits when FS/LS device is plugged in, so revert this one
and introduce a new workaround.
Change-Id: Ifa856620672191c845abc53a76370cd5bf4097dc
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
We need a luxury timeout once needing some extra time to
wait for flushing cache.
Change-Id: I8cd4015f30fa45cacdb984f0461b1ad8ee6cba7d
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
SADs may span multiple CEA audio data blocks in the EDID.
CEA-861-E says:
"The order of the Data Blocks is not constrained. It is also possible
to have more than one of a specific type of data block if necessary to
include all of the descriptors needed to describe the sink’s capabilities."
Each audio data block can carry up to 10 SADs, whereas the ELD SAD limit
is 15 according to HDA 1.0a spec. So we should support at least two data
blocks. And apparently some devices take a more liberal interpretation
and stuff only one SAD per data block even when they would fit into one.
So let's try to extract all the SADs we can fit into the ELD even when
they span multiple data blocks.
While at it, toss in a comment to explain the 13 byte monitor name
string limit which confused me at first.
Cc: Arturo Pérez <artur999555@gmail.com>
Tested-by: Arturo Pérez <artur999555@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=94197
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1457554066-8739-1-git-send-email-ville.syrjala@linux.intel.com
(cherry picked from commit 7c01878254)
Change-Id: I18c5c64b69802a6a50de624d55b4b5217943b76e
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
