The patch acceptance policy forbids accepting support for non-standard
behavior. This policy was written in order to both steer implementers
towards the standards and to avoid coupling the upstream kernel too
tightly to vendor-specific features. Those were good goals, but in
practice the policy just isn't working: every RISC-V system we have
needs vendor-specific behavior in the kernel and we end up taking that
support which violates the policy. That's confusing for contributors,
which is the main reason we have a written policy in the first place.
So let's just start taking code for vendor-defined behavior.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Link: https://lore.kernel.org/all/alpine.DEB.2.21.999.2211181027590.4480@utopia.booyaka.com/
[Palmer: merge in Paul's suggestions]
Link: https://lore.kernel.org/r/20221207020815.16214-3-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Pull selinux updates from Paul Moore:
"Two SELinux patches: one increases the sleep time on deprecated
functionality, and one removes the indirect calls in the sidtab
context conversion code"
* tag 'selinux-pr-20221212' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: remove the sidtab context conversion indirect calls
selinux: increase the deprecation sleep for checkreqprot and runtime disable
Pull audit updates from Paul Moore:
"Two performance oriented patches for the audit subsystem: one
consolidates similar code to gain some caching advantages, while the
other stores a value in a stack variable to avoid repeated lookups in
a loop.
The commit descriptions have more information, including some
before/after performance measurements"
* tag 'audit-pr-20221212' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: unify audit_filter_{uring(), inode_name(), syscall()}
audit: cache ctx->major in audit_filter_syscall()
Pull landlock updates from Mickaël Salaün:
"This adds file truncation support to Landlock, contributed by Günther
Noack. As described by Günther [1], the goal of these patches is to
work towards a more complete coverage of file system operations that
are restrictable with Landlock.
The known set of currently unsupported file system operations in
Landlock is described at [2]. Out of the operations listed there,
truncate is the only one that modifies file contents, so these patches
should make it possible to prevent the direct modification of file
contents with Landlock.
The new LANDLOCK_ACCESS_FS_TRUNCATE access right covers both the
truncate(2) and ftruncate(2) families of syscalls, as well as open(2)
with the O_TRUNC flag. This includes usages of creat() in the case
where existing regular files are overwritten.
Additionally, this introduces a new Landlock security blob associated
with opened files, to track the available Landlock access rights at
the time of opening the file. This is in line with Unix's general
approach of checking the read and write permissions during open(), and
associating this previously checked authorization with the opened
file. An ongoing patch documents this use case [3].
In order to treat truncate(2) and ftruncate(2) calls differently in an
LSM hook, we split apart the existing security_path_truncate hook into
security_path_truncate (for truncation by path) and
security_file_truncate (for truncation of previously opened files)"
Link: https://lore.kernel.org/r/20221018182216.301684-1-gnoack3000@gmail.com [1]
Link: https://www.kernel.org/doc/html/v6.1/userspace-api/landlock.html#filesystem-flags [2]
Link: https://lore.kernel.org/r/20221209193813.972012-1-mic@digikod.net [3]
* tag 'landlock-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
samples/landlock: Document best-effort approach for LANDLOCK_ACCESS_FS_REFER
landlock: Document Landlock's file truncation support
samples/landlock: Extend sample tool to support LANDLOCK_ACCESS_FS_TRUNCATE
selftests/landlock: Test ftruncate on FDs created by memfd_create(2)
selftests/landlock: Test FD passing from restricted to unrestricted processes
selftests/landlock: Locally define __maybe_unused
selftests/landlock: Test open() and ftruncate() in multiple scenarios
selftests/landlock: Test file truncation support
landlock: Support file truncation
landlock: Document init_layer_masks() helper
landlock: Refactor check_access_path_dual() into is_access_to_paths_allowed()
security: Create file_truncate hook from path_truncate hook
Pull dma-mapping updates from Christoph Hellwig:
- reduce the swiotlb buffer size on allocation failure (Alexey
Kardashevskiy)
- clean up passing of bogus GFP flags to the dma-coherent allocator
(Christoph Hellwig)
* tag 'dma-mapping-6.2-2022-12-13' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: reject __GFP_COMP in dma_alloc_attrs
ALSA: memalloc: don't pass bogus GFP_ flags to dma_alloc_*
s390/ism: don't pass bogus GFP_ flags to dma_alloc_coherent
cnic: don't pass bogus GFP_ flags to dma_alloc_coherent
RDMA/qib: don't pass bogus GFP_ flags to dma_alloc_coherent
RDMA/hfi1: don't pass bogus GFP_ flags to dma_alloc_coherent
media: videobuf-dma-contig: use dma_mmap_coherent
swiotlb: reduce the swiotlb buffer size on allocation failure
Pull configfs updates from Christoph Hellwig:
- fix a memory leak in configfs_create_dir (Chen Zhongjin)
- remove mentions of committable items that were implemented (Bartosz
Golaszewski)
* tag 'configfs-6.2-2022-12-13' of git://git.infradead.org/users/hch/configfs:
configfs: remove mentions of committable items
configfs: fix possible memory leak in configfs_create_dir()
Pull NFS client updates from Trond Myklebust
"Bugfixes:
- Fix NULL pointer dereference in the mount parser
- Fix memory stomp in decode_attr_security_label
- Fix credential leak in _nfs4_discover_trunking()
- Fix buffer leak in rpcrdma_req_create()
- Fix leaked socket in rpc_sockname()
- Fix deadlock between nfs4_open_recover_helper() and delegreturn
- Fix an Oops in nfs_d_automount()
- Fix potential race in nfs_call_unlink()
- Multiple fixes for the open context mode
- NFSv4.2 READ_PLUS fixes
- Fix a regression in which small rsize/wsize values are being
forbidden
- Fail client initialisation if the NFSv4.x state manager thread
can't run
- Avoid spurious warning of lost lock that is being unlocked.
- Ensure the initialisation of struct nfs4_label
Features and cleanups:
- Trigger the "ls -l" readdir heuristic sooner
- Clear the file access cache upon login to ensure supplementary
group info is in sync between the client and server
- pnfs: Fix up the logging of layout stateids
- NFSv4.2: Change the default KConfig value for READ_PLUS
- Use sysfs_emit() instead of scnprintf() where appropriate"
* tag 'nfs-for-6.2-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (24 commits)
NFSv4.2: Change the default KConfig value for READ_PLUS
NFSv4.x: Fail client initialisation if state manager thread can't run
fs: nfs: sysfs: use sysfs_emit() to instead of scnprintf()
NFS: use sysfs_emit() to instead of scnprintf()
NFS: Allow very small rsize & wsize again
NFSv4.2: Fix up READ_PLUS alignment
NFSv4.2: Set the correct size scratch buffer for decoding READ_PLUS
SUNRPC: Fix missing release socket in rpc_sockname()
xprtrdma: Fix regbuf data not freed in rpcrdma_req_create()
NFS: avoid spurious warning of lost lock that is being unlocked.
nfs: fix possible null-ptr-deref when parsing param
NFSv4: check FMODE_EXEC from open context mode in nfs4_opendata_access()
NFS: make sure open context mode have FMODE_EXEC when file open for exec
NFS4.x/pnfs: Fix up logging of layout stateids
NFS: Fix a race in nfs_call_unlink()
NFS: Fix an Oops in nfs_d_automount()
NFSv4: Fix a deadlock between nfs4_open_recover_helper() and delegreturn
NFSv4: Fix a credential leak in _nfs4_discover_trunking()
NFS: Trigger the "ls -l" readdir heuristic sooner
NFSv4.2: Fix initialisation of struct nfs4_label
...
In Kbuild, some files are generated by chains of pattern/implicit rules.
For example, *.dtb.o files in drivers/of/unittest-data/Makefile are
generated by the chain of 3 pattern rules, like this:
%.dts -> %.dtb -> %.dtb.S -> %.dtb.o
Here, %.dts is the real source, %.dtb.o is the final target.
%.dtb and %.dtb.S are called "intermediate files".
As GNU Make manual [1] says, intermediate files are treated differently
in two ways:
(a) The first difference is what happens if the intermediate file does
not exist. If an ordinary file 'b' does not exist, and make considers
a target that depends on 'b', it invariably creates 'b' and then
updates the target from 'b'. But if 'b' is an intermediate file, then
make can leave well enough alone: it won't create 'b' unless one of
its prerequisites is out of date. This means the target depending
on 'b' won't be rebuilt either, unless there is some other reason
to update that target: for example the target doesn't exist or a
different prerequisite is newer than the target.
(b) The second difference is that if make does create 'b' in order to
update something else, it deletes 'b' later on after it is no longer
needed. Therefore, an intermediate file which did not exist before
make also does not exist after make. make reports the deletion to
you by printing a 'rm' command showing which file it is deleting.
The combination of these is problematic for Kbuild because most of the
build rules depend on FORCE and the if_changed* macros really determine
if the target should be updated. So, all missing files, whether they
are intermediate or not, are always rebuilt.
To see the problem, delete ".SECONDARY:" from scripts/Kbuild.include,
and repeat this command:
$ make allmodconfig drivers/of/unittest-data/
The intermediate files will be deleted, which results in rebuilding
intermediate and final objects in the next run of make.
In the old days, people suppressed (b) in inconsistent ways.
As commit 54a702f705 ("kbuild: mark $(targets) as .SECONDARY and
remove .PRECIOUS markers") noted, you should not use .PRECIOUS because
.PRECIOUS has the following behavior (c), which is not likely what you
want.
(c) If make is killed or interrupted during the execution of their
recipes, the target is not deleted. Also, the target is not deleted
on error even if .DELETE_ON_ERROR is specified.
.SECONDARY is a much better way to disable (b), but a small problem
is that .SECONDARY enables (a), which gives a side-effect to $?;
prerequisites marked as .SECONDARY do not appear in $?. This is a
drawback for Kbuild.
I thought it was a bug and opened a bug report. As Paul, the GNU Make
maintainer, concluded in [2], this is not a bug.
A good news is that, GNU Make 4.4 added the perfect solution,
.NOTINTERMEDIATE, which cancels both (a) and (b).
For clarificaton, my understanding of .INTERMEDIATE, .SECONDARY,
.PRECIOUS and .NOTINTERMEDIATE are as follows:
(a) (b) (c)
.INTERMEDIATE enable enable disable
.SECONDARY enable disable disable
.PRECIOUS disable disable enable
.NOTINTERMEDIATE disable disable disable
However, GNU Make 4.4 has a bug for the global .NOTINTERMEDIATE. [3]
It was fixed by commit 6164608900ad ("[SV 63417] Ensure global
.NOTINTERMEDIATE disables all intermediates"), and will be available
in the next release of GNU Make.
The following is the gain for .NOTINTERMEDIATE:
[Current Make]
$ make allnoconfig vmlinux
[ full build ]
$ rm include/linux/device.h
$ make vmlinux
CALL scripts/checksyscalls.sh
Make does not notice the removal of <linux/device.h>.
[Future Make]
$ make-latest allnoconfig vmlinux
[ full build ]
$ rm include/linux/device.h
$ make-latest vmlinux
CC arch/x86/kernel/asm-offsets.s
In file included from ./include/linux/writeback.h:13,
from ./include/linux/memcontrol.h:22,
from ./include/linux/swap.h:9,
from ./include/linux/suspend.h:5,
from arch/x86/kernel/asm-offsets.c:13:
./include/linux/blk_types.h:11:10: fatal error: linux/device.h: No such file or directory
11 | #include <linux/device.h>
| ^~~~~~~~~~~~~~~~
compilation terminated.
make-latest[1]: *** [scripts/Makefile.build:114: arch/x86/kernel/asm-offsets.s] Error 1
make-latest: *** [Makefile:1282: prepare0] Error 2
Make notices the removal of <linux/device.h>, and rebuilds objects
that depended on <linux/device.h>. There exists a source file that
includes <linux/device.h>, and it raises an error.
To see detailed background information, refer to commit 2d3b1b8f0d
("kbuild: drop $(wildcard $^) check in if_changed* for faster rebuild").
[1]: https://www.gnu.org/software/make/manual/make.html#Chained-Rules
[2]: https://savannah.gnu.org/bugs/?55532
[3]: https://savannah.gnu.org/bugs/?63417
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Refactor Makefile and use read-file macro. For Make >= 4.2, it can read
out a file by using the built-in function.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Since GNU Make 4.2, $(file ...) supports the read operater '<', which
is useful to read a file without forking a new process. No warning is
shown even if the input file is missing.
For older Make versions, it falls back to the cat command.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Alexander Lobakin <alexandr.lobakin@intel.com>
modules.order lists modules in the deterministic order (that is why
"modules order"), and there is no duplication in the list.
$(sort ) is pointless.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
GNU Make 4.4 introduced $(intcmp ...), which is useful to compare two
integers without forking a new process.
Add test-{ge,gt,le,lt} macros, which work more efficiently with GNU
Make >= 4.4. For older Make versions, they fall back to the 'test'
shell command.
The first two parameters to $(intcmp ...) must not be empty. To avoid
the syntax error, I appended '0' to them. Fortunately, '00' is treated
as '0'. This is needed because CONFIG options may expand to an empty
string when the kernel configuration is not included.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com> # RISC-V
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Binutils 2.23 was released in 2012. Almost 10 years old.
We already require GCC 5.1, released in 2015.
Bump the binutils version to 2.25, which was released some months
before GCC 5.1.
With this applied, some subsystems can start to clean up code.
Examples:
arch/arm/Kconfig.assembler
arch/mips/vdso/Kconfig
arch/powerpc/Makefile
arch/x86/Kconfig.assembler
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
The vfs{g,u}id_{gt,lt}_* helpers are currently not needed outside of
ima and we shouldn't incentivize people to use them by placing them into
the header. Let's just define them locally in the one file in ima where
they are used.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Exposed through sysctl, update documentation to describe sctp states and
their default timeouts.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
It is better to return the default switch case with
'-EINVAL', in case new commands are added. otherwise,
return a uninitialized value of ret.
Signed-off-by: Li Qiong <liqiong@nfschina.com>
Reviewed-by: Simon Horman <horms@verge.net.au>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In exfat_get_dentry_set(), part of the code is the same as
exfat_find_location(), reuse exfat_find_location() to simplify
exfat_get_dentry_set().
Code refinement, no functional changes.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
According to the exFAT specification, there are at most 2^32-11
clusters in a volume. so using 'int' is not enough for cluster
index, the return value type of exfat_sector_to_cluster() should
be 'unsigned int'.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
32 bit platforms without 64bit div generate the following warning:
net/netfilter/ipvs/ip_vs_est.c: In function 'ip_vs_est_calc_limits':
include/asm-generic/div64.h:222:35: warning: comparison of distinct pointer types lacks a cast
222 | (void)(((typeof((n)) *)0) == ((uint64_t *)0)); \
| ^~
net/netfilter/ipvs/ip_vs_est.c:694:17: note: in expansion of macro 'do_div'
694 | do_div(val, loops);
| ^~~~~~
include/asm-generic/div64.h:222:35: warning: comparison of distinct pointer types lacks a cast
222 | (void)(((typeof((n)) *)0) == ((uint64_t *)0)); \
| ^~
net/netfilter/ipvs/ip_vs_est.c:700:33: note: in expansion of macro 'do_div'
700 | do_div(val, min_est);
| ^~~~~~
first argument of do_div() should be unsigned. We can't just cast
as do_div() updates it as well, so we need an lval.
Make val unsigned in the first place, all paths check that the value
they assign to this variables are non-negative already.
Fixes: 705dd34440 ("ipvs: use kthreads for stats estimation")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20221213032037.844517-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Merge in the left-over fixes before the net-next pull-request.
net/mptcp/subflow.c
d3295fee3c ("mptcp: use proper req destructor for IPv6")
36b122baf6 ("mptcp: add subflow_v(4,6)_send_synack()")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
RISC-V kernels support 3,4,5-level page tables at runtime by folding
upper levels.
In case of a 3-level page table, PGDIR is folded into P4D which in turn
is folded into PUD: PGDIR_SHIFT value is correctly set to the same value
as PUD_SHIFT, but P4D_SHIFT is not, then any use of P4D_SHIFT will access
invalid address bits (all set to 1).
Fix this by dynamically defining P4D_SHIFT value, like we already do for
PGDIR_SHIFT.
Fixes: d10efa21a9 ("riscv: mm: Control p4d's folding by pgtable_l5_enabled")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20221201135128.1482189-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Pull nfsd updates from Chuck Lever:
"This release introduces support for the CB_RECALL_ANY operation. NFSD
can send this operation to request that clients return any delegations
they choose. The server uses this operation to handle low memory
scenarios or indicate to a client when that client has reached the
maximum number of delegations the server supports.
The NFSv4.2 READ_PLUS operation has been simplified temporarily whilst
support for sparse files in local filesystems and the VFS is improved.
Two major data structure fixes appear in this release:
- The nfs4_file hash table is replaced with a resizable hash table to
reduce the latency of NFSv4 OPEN operations.
- Reference counting in the NFSD filecache has been hardened against
races.
In furtherance of removing support for NFSv2 in a subsequent kernel
release, a new Kconfig option enables server-side support for NFSv2 to
be left out of a kernel build.
MAINTAINERS has been updated to indicate that changes to fs/exportfs
should go through the NFSD tree"
* tag 'nfsd-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (49 commits)
NFSD: Avoid clashing function prototypes
SUNRPC: Fix crasher in unwrap_integ_data()
SUNRPC: Make the svc_authenticate tracepoint conditional
NFSD: Use only RQ_DROPME to signal the need to drop a reply
SUNRPC: Clean up xdr_write_pages()
SUNRPC: Don't leak netobj memory when gss_read_proxy_verf() fails
NFSD: add CB_RECALL_ANY tracepoints
NFSD: add delegation reaper to react to low memory condition
NFSD: add support for sending CB_RECALL_ANY
NFSD: refactoring courtesy_client_reaper to a generic low memory shrinker
trace: Relocate event helper files
NFSD: pass range end to vfs_fsync_range() instead of count
lockd: fix file selection in nlmsvc_cancel_blocked
lockd: ensure we use the correct file descriptor when unlocking
lockd: set missing fl_flags field when retrieving args
NFSD: Use struct_size() helper in alloc_session()
nfsd: return error if nfs4_setacl fails
lockd: set other missing fields when unlocking files
NFSD: Add an nfsd_file_fsync tracepoint
sunrpc: svc: Remove an unused static function svc_ungetu32()
...
Pull btrfs updates from David Sterba:
"This round there are a lot of cleanups and moved code so the diffstat
looks huge, otherwise there are some nice performance improvements and
an update to raid56 reliability.
User visible features:
- raid56 reliability vs performance trade off:
- fix destructive RMW for raid5 data (raid6 still needs work): do
full checksum verification for all data during RMW cycle, this
should prevent rewriting potentially corrupted data without
notice
- stripes are cached in memory which should reduce the performance
impact but still can hurt some workloads
- checksums are verified after repair again
- this is the last option without introducing additional features
(write intent bitmap, journal, another tree), the extra checksum
read/verification was supposed to be avoided by the original
implementation exactly for performance reasons but that caused
all the reliability problems
- discard=async by default for devices that support it
- implement emergency flush reserve to avoid almost all unnecessary
transaction aborts due to ENOSPC in cases where there are too many
delayed refs or delayed allocation
- skip block group synchronization if there's no change in used
bytes, can reduce transaction commit count for some workloads
Performance improvements:
- fiemap and lseek:
- overall speedup due to skipping unnecessary or duplicate
searches (-40% run time)
- cache some data structures and sharedness of extents (-30% run
time)
- send:
- faster backref resolution when finding clones
- cached leaf to root mapping for faster backref walking
- improved clone/sharing detection
- overall run time improvements (-70%)
Core:
- module initialization converted to a table of function pointers run
in a sequence
- preparation for fscrypt, extend passing file names across calls,
dir item can store encryption status
- raid56 updates:
- more accurate error tracking of sectors within stripe
- simplify recovery path and remove dedicated endio worker kthread
- simplify scrub call paths
- refactoring to support the extra data checksum verification
during RMW cycle
- tree block parentness checks consolidated and done at metadata read
time
- improved error handling
- cleanups:
- move a lot of code for better synchronization between kernel and
user space sources, split big files
- enum cleanups
- GFP flag cleanups
- header file cleanups, prototypes, dependencies
- redundant parameter cleanups
- inline extent handling simplifications
- inode parameter conversion
- data structure cleanups, reductions, renames, merges"
* tag 'for-6.2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (249 commits)
btrfs: print transaction aborted messages with an error level
btrfs: sync some cleanups from progs into uapi/btrfs.h
btrfs: do not BUG_ON() on ENOMEM when dropping extent items for a range
btrfs: fix extent map use-after-free when handling missing device in read_one_chunk
btrfs: remove outdated logic from overwrite_item() and add assertion
btrfs: unify overwrite_item() and do_overwrite_item()
btrfs: replace strncpy() with strscpy()
btrfs: fix uninitialized variable in find_first_clear_extent_bit
btrfs: fix uninitialized parent in insert_state
btrfs: add might_sleep() annotations
btrfs: add stack helpers for a few btrfs items
btrfs: add nr_global_roots to the super block definition
btrfs: remove BTRFS_LEAF_DATA_OFFSET
btrfs: add helpers for manipulating leaf items and data
btrfs: add eb to btrfs_node_key_ptr_offset
btrfs: pass the extent buffer for the btrfs_item_nr helpers
btrfs: move the csum helpers into ctree.h
btrfs: move eb offset helpers into extent_io.h
btrfs: move file_extent_item helpers into file-item.h
btrfs: move leaf_data_end into ctree.c
...
Pull dlm updates from David Teigland:
"These patches include the usual cleanups and minor fixes, the removal
of code that is no longer needed due to recent improvements, and
improvements to processing large volumes of messages during heavy
locking activity.
Summary:
- Misc code cleanup
- Fix a couple of socket handling bugs: a double release on an error
path and a data-ready race in an accept loop
- Remove code for resending dir-remove messages. This code is no
longer needed since the midcomms layer now ensures the messages are
resent if needed
- Add tracepoints for dlm messages
- Improve callback queueing by replacing the fixed array with a list
- Simplify the handling of a remove message followed by a lookup
message by sending both without releasing a spinlock in between
- Improve the concurrency of sending and receiving messages by
holding locks for a shorter time, and changing how workqueues are
used
- Remove old code for shutting down sockets, which is no longer
needed with the reliable connection handling that was recently
added"
* tag 'dlm-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: (37 commits)
fs: dlm: fix building without lockdep
fs: dlm: parallelize lowcomms socket handling
fs: dlm: don't init error value
fs: dlm: use saved sk_error_report()
fs: dlm: use sock2con without checking null
fs: dlm: remove dlm_node_addrs lookup list
fs: dlm: don't put dlm_local_addrs on heap
fs: dlm: cleanup listen sock handling
fs: dlm: remove socket shutdown handling
fs: dlm: use listen sock as dlm running indicator
fs: dlm: use list_first_entry_or_null
fs: dlm: remove twice INIT_WORK
fs: dlm: add midcomms init/start functions
fs: dlm: add dst nodeid for msg tracing
fs: dlm: rename seq to h_seq for msg tracing
fs: dlm: rename DLM_IFL_NEED_SCHED to DLM_IFL_CB_PENDING
fs: dlm: ast do WARN_ON_ONCE() on hotpath
fs: dlm: drop lkb ref in bug case
fs: dlm: avoid false-positive checker warning
fs: dlm: use WARN_ON_ONCE() instead of WARN_ON()
...
Pull jfs updates from David Kleikamp:
"Assorted JFS fixes for 6.2"
* tag 'jfs-6.2' of https://github.com/kleikamp/linux-shaggy:
jfs: makes diUnmount/diMount in jfs_mount_rw atomic
jfs: Fix a typo in function jfs_umount
fs: jfs: fix shift-out-of-bounds in dbDiscardAG
jfs: Fix fortify moan in symlink
jfs: remove redundant assignments to ipaimap and ipaimap2
jfs: remove unused declarations for jfs
fs/jfs/jfs_xattr.h: Fix spelling typo in comment
MAINTAINERS: git://github -> https://github.com for kleikamp
fs/jfs: replace ternary operator with min_t()
fs: jfs: fix shift-out-of-bounds in dbAllocAG
Pull udf and ext2 fixes from Jan Kara:
- a couple of smaller cleanups and fixes for ext2
- fixes of a data corruption issues in udf when handling holes and
preallocation extents
- fixes and cleanups of several smaller issues in udf
- add maintainer entry for isofs
* tag 'fixes_for_v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Fix extending file within last block
udf: Discard preallocation before extending file with a hole
udf: Do not bother looking for prealloc extents if i_lenExtents matches i_size
udf: Fix preallocation discarding at indirect extent boundary
udf: Increase UDF_MAX_READ_VERSION to 0x0260
fs/ext2: Fix code indentation
ext2: unbugger ext2_empty_dir()
udf: remove ->writepage
ext2: remove ->writepage
ext2: Don't flush page immediately for DIRSYNC directories
ext2: Fix some kernel-doc warnings
maintainers: Add ISOFS entry
udf: Avoid double brelse() in udf_rename()
fs: udf: Optimize udf_free_in_core_inode and udf_find_fileset function
Pull xattr audit fix from Seth Forshee:
"This is a single patch to remove auditing of the capability check in
simple_xattr_list().
This check is done to check whether trusted xattrs should be included
by listxattr(2). SELinux will normally log a denial when capable() is
called and the task's SELinux context doesn't have the corresponding
capability permission allowed, which can end up spamming the log.
Since a failed check here cannot be used to infer malicious intent,
auditing is of no real value, and it makes sense to stop auditing the
capability check"
* tag 'fs.xattr.simple.noaudit.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
fs: don't audit the capability check in simple_xattr_list()
Pull squashfs update from Seth Forshee:
"This is a simple patch to enable idmapped mounts for squashfs.
All functionality squashfs needs to support idmapped mounts is already
implemented in generic VFS code, so all that is needed is to set
FS_ALLOW_IDMAP in fs_flags"
* tag 'fs.idmapped.squashfs.v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
squashfs: enable idmapped mounts
Pull fuse update from Miklos Szeredi:
- Allow some write requests to proceed in parallel
- Fix a performance problem with allow_sys_admin_access
- Add a special kind of invalidation that doesn't immediately purge
submounts
- On revalidation treat the target of rename(RENAME_NOREPLACE) the same
as open(O_EXCL)
- Use type safe helpers for some mnt_userns transformations
* tag 'fuse-update-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: Rearrange fuse_allow_current_process checks
fuse: allow non-extending parallel direct writes on the same file
fuse: remove the unneeded result variable
fuse: port to vfs{g,u}id_t and associated helpers
fuse: Remove user_ns check for FUSE_DEV_IOC_CLONE
fuse: always revalidate rename target dentry
fuse: add "expire only" mode to FUSE_NOTIFY_INVAL_ENTRY
fs/fuse: Replace kmap() with kmap_local_page()
Pull overlayfs update from Miklos Szeredi:
- Fix a couple of bugs found by syzbot
- Don't ingore some open flags set by fcntl(F_SETFL)
- Fix failure to create a hard link in certain cases
- Use type safe helpers for some mnt_userns transformations
- Improve performance of mount
- Misc cleanups
* tag 'ovl-update-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: Kconfig: Fix spelling mistake "undelying" -> "underlying"
ovl: use inode instead of dentry where possible
ovl: Add comment on upperredirect reassignment
ovl: use plain list filler in indexdir and workdir cleanup
ovl: do not reconnect upper index records in ovl_indexdir_cleanup()
ovl: fix comment typos
ovl: port to vfs{g,u}id_t and associated helpers
ovl: Use ovl mounter's fsuid and fsgid in ovl_link()
ovl: Use "buf" flexible array for memcpy() destination
ovl: update ->f_iocb_flags when ovl_change_flags() modifies ->f_flags
ovl: fix use inode directly in rcu-walk mode
Pull erofs updates from Gao Xiang:
"In this cycle, large folios are now enabled in the iomap/fscache mode
for uncompressed files first. In order to do that, we've also cleaned
up better interfaces between erofs and fscache, which are acked by
fscache/netfs folks and included in this pull request.
Other than that, there are random fixes around erofs over fscache and
crafted images by syzbot, minor cleanups and documentation updates.
Summary:
- Enable large folios for iomap/fscache mode
- Avoid sysfs warning due to mounting twice with the same fsid and
domain_id in fscache mode
- Refine fscache interface among erofs, fscache, and cachefiles
- Use kmap_local_page() only for metabuf
- Fixes around crafted images found by syzbot
- Minor cleanups and documentation updates"
* tag 'erofs-for-6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: validate the extent length for uncompressed pclusters
erofs: fix missing unmap if z_erofs_get_extent_compressedlen() fails
erofs: Fix pcluster memleak when its block address is zero
erofs: use kmap_local_page() only for erofs_bread()
erofs: enable large folios for fscache mode
erofs: support large folios for fscache mode
erofs: switch to prepare_ondemand_read() in fscache mode
fscache,cachefiles: add prepare_ondemand_read() callback
erofs: clean up cached I/O strategies
erofs: update documentation
erofs: check the uniqueness of fsid in shared domain in advance
erofs: enable large folios for iomap mode
Pull fsverity updates from Eric Biggers:
"The main change this cycle is to stop using the PG_error flag to track
verity failures, and instead just track failures at the bio level.
This follows a similar fscrypt change that went into 6.1, and it is a
step towards freeing up PG_error for other uses.
There's also one other small cleanup"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fsverity: simplify fsverity_get_digest()
fsverity: stop using PG_error to track error status
Pull fscrypt updates from Eric Biggers:
"This release adds SM4 encryption support, contributed by Tianjia
Zhang. SM4 is a Chinese block cipher that is an alternative to AES.
I recommend against using SM4, but (according to Tianjia) some people
are being required to use it. Since SM4 has been turning up in many
other places (crypto API, wireless, TLS, OpenSSL, ARMv8 CPUs, etc.),
it hasn't been very controversial, and some people have to use it, I
don't think it would be fair for me to reject this optional feature.
Besides the above, there are a couple cleanups"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: add additional documentation for SM4 support
fscrypt: remove unused Speck definitions
fscrypt: Add SM4 XTS/CTS symmetric algorithm support
blk-crypto: Add support for SM4-XTS blk crypto mode
fscrypt: add comment for fscrypt_valid_enc_modes_v1()
fscrypt: pass super_block to fscrypt_put_master_key_activeref()
