mirror of
https://github.com/hardkernel/linux.git
synced 2026-04-02 11:13:02 +09:00
8a1d63080fce675dd1e9fd01ac5fd3947fc86dc4
21 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
tao zeng
|
4d6ae43593 |
mm: optimize thread stack usage on arm64 [1/1]
PD#SWPL-1219 Problem: On arm64, thread stack is 16KB for each task. If running task number is large, this type of memory may over 40MB. It's a large amount on small memory platform. But most case thread only use less 4KB stack. It's waste of memory and we need optimize it. Solution: 1. Pre-allocate a vmalloc address space for task stack; 2. Only map 1st page for stack and handle page fault in EL1 when stack growth triggered exception; 3. handle stack switch for exception. Verify: p212 Change-Id: I47f511ccfa2868d982bc10a820ed6435b6d52ba9 Signed-off-by: tao zeng <tao.zeng@amlogic.com> |
||
|
Greg Kroah-Hartman
|
9797dcb8c7 |
Merge 4.9.104 into android-4.9
Changes in 4.9.104
MIPS: c-r4k: Fix data corruption related to cache coherence
MIPS: ptrace: Expose FIR register through FP regset
MIPS: Fix ptrace(2) PTRACE_PEEKUSR and PTRACE_POKEUSR accesses to o32 FGRs
KVM: Fix spelling mistake: "cop_unsuable" -> "cop_unusable"
affs_lookup(): close a race with affs_remove_link()
aio: fix io_destroy(2) vs. lookup_ioctx() race
ALSA: timer: Fix pause event notification
do d_instantiate/unlock_new_inode combinations safely
mmc: sdhci-iproc: remove hard coded mmc cap 1.8v
mmc: sdhci-iproc: fix 32bit writes for TRANSFER_MODE register
libata: Blacklist some Sandisk SSDs for NCQ
libata: blacklist Micron 500IT SSD with MU01 firmware
xen-swiotlb: fix the check condition for xen_swiotlb_free_coherent
drm/vmwgfx: Fix 32-bit VMW_PORT_HB_[IN|OUT] macros
IB/hfi1: Use after free race condition in send context error path
Revert "ipc/shm: Fix shmat mmap nil-page protection"
ipc/shm: fix shmat() nil address after round-down when remapping
kasan: fix memory hotplug during boot
kernel/sys.c: fix potential Spectre v1 issue
kernel/signal.c: avoid undefined behaviour in kill_something_info
KVM/VMX: Expose SSBD properly to guests
KVM: s390: vsie: fix < 8k check for the itdba
KVM: x86: Update cpuid properly when CR4.OSXAVE or CR4.PKE is changed
kvm: x86: IA32_ARCH_CAPABILITIES is always supported
firewire-ohci: work around oversized DMA reads on JMicron controllers
x86/tsc: Allow TSC calibration without PIT
NFSv4: always set NFS_LOCK_LOST when a lock is lost.
ALSA: hda - Use IS_REACHABLE() for dependency on input
kvm: x86: fix KVM_XEN_HVM_CONFIG ioctl
netfilter: ipv6: nf_defrag: Pass on packets to stack per RFC2460
tracing/hrtimer: Fix tracing bugs by taking all clock bases and modes into account
PCI: Add function 1 DMA alias quirk for Marvell 9128
Input: psmouse - fix Synaptics detection when protocol is disabled
i40iw: Zero-out consumer key on allocate stag for FMR
tools lib traceevent: Simplify pointer print logic and fix %pF
perf callchain: Fix attr.sample_max_stack setting
tools lib traceevent: Fix get_field_str() for dynamic strings
perf record: Fix failed memory allocation for get_cpuid_str
iommu/vt-d: Use domain instead of cache fetching
dm thin: fix documentation relative to low water mark threshold
net: stmmac: dwmac-meson8b: fix setting the RGMII TX clock on Meson8b
net: stmmac: dwmac-meson8b: propagate rate changes to the parent clock
nfs: Do not convert nfs_idmap_cache_timeout to jiffies
watchdog: sp5100_tco: Fix watchdog disable bit
kconfig: Don't leak main menus during parsing
kconfig: Fix automatic menu creation mem leak
kconfig: Fix expr_free() E_NOT leak
mac80211_hwsim: fix possible memory leak in hwsim_new_radio_nl()
ipmi/powernv: Fix error return code in ipmi_powernv_probe()
Btrfs: set plug for fsync
btrfs: Fix out of bounds access in btrfs_search_slot
Btrfs: fix scrub to repair raid6 corruption
btrfs: fail mount when sb flag is not in BTRFS_SUPER_FLAG_SUPP
HID: roccat: prevent an out of bounds read in kovaplus_profile_activated()
fm10k: fix "failed to kill vid" message for VF
device property: Define type of PROPERTY_ENRTY_*() macros
jffs2: Fix use-after-free bug in jffs2_iget()'s error handling path
powerpc/numa: Use ibm,max-associativity-domains to discover possible nodes
powerpc/numa: Ensure nodes initialized for hotplug
RDMA/mlx5: Avoid memory leak in case of XRCD dealloc failure
ntb_transport: Fix bug with max_mw_size parameter
gianfar: prevent integer wrapping in the rx handler
tcp_nv: fix potential integer overflow in tcpnv_acked
kvm: Map PFN-type memory regions as writable (if possible)
ocfs2: return -EROFS to mount.ocfs2 if inode block is invalid
ocfs2/acl: use 'ip_xattr_sem' to protect getting extended attribute
ocfs2: return error when we attempt to access a dirty bh in jbd2
mm/mempolicy: fix the check of nodemask from user
mm/mempolicy: add nodes_empty check in SYSC_migrate_pages
asm-generic: provide generic_pmdp_establish()
sparc64: update pmdp_invalidate() to return old pmd value
mm: thp: use down_read_trylock() in khugepaged to avoid long block
mm: pin address_space before dereferencing it while isolating an LRU page
mm/fadvise: discard partial page if endbyte is also EOF
openvswitch: Remove padding from packet before L3+ conntrack processing
IB/ipoib: Fix for potential no-carrier state
drm/nouveau/pmu/fuc: don't use movw directly anymore
netfilter: ipv6: nf_defrag: Kill frag queue on RFC2460 failure
x86/power: Fix swsusp_arch_resume prototype
firmware: dmi_scan: Fix handling of empty DMI strings
ACPI: processor_perflib: Do not send _PPC change notification if not ready
ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs
bpf: fix selftests/bpf test_kmod.sh failure when CONFIG_BPF_JIT_ALWAYS_ON=y
MIPS: generic: Fix machine compatible matching
MIPS: TXx9: use IS_BUILTIN() for CONFIG_LEDS_CLASS
xen-netfront: Fix race between device setup and open
xen/grant-table: Use put_page instead of free_page
RDS: IB: Fix null pointer issue
arm64: spinlock: Fix theoretical trylock() A-B-A with LSE atomics
proc: fix /proc/*/map_files lookup
cifs: silence compiler warnings showing up with gcc-8.0.0
bcache: properly set task state in bch_writeback_thread()
bcache: fix for allocator and register thread race
bcache: fix for data collapse after re-attaching an attached device
bcache: return attach error when no cache set exist
tools/libbpf: handle issues with bpf ELF objects containing .eh_frames
bpf: fix rlimit in reuseport net selftest
vfs/proc/kcore, x86/mm/kcore: Fix SMAP fault when dumping vsyscall user page
locking/qspinlock: Ensure node->count is updated before initialising node
irqchip/gic-v3: Ignore disabled ITS nodes
cpumask: Make for_each_cpu_wrap() available on UP as well
irqchip/gic-v3: Change pr_debug message to pr_devel
ARC: Fix malformed ARC_EMUL_UNALIGNED default
ptr_ring: prevent integer overflow when calculating size
libata: Fix compile warning with ATA_DEBUG enabled
selftests: pstore: Adding config fragment CONFIG_PSTORE_RAM=m
selftests: memfd: add config fragment for fuse
ARM: OMAP2+: timer: fix a kmemleak caused in omap_get_timer_dt
ARM: OMAP3: Fix prm wake interrupt for resume
ARM: OMAP1: clock: Fix debugfs_create_*() usage
ibmvnic: Free RX socket buffer in case of adapter error
iwlwifi: mvm: fix security bug in PN checking
iwlwifi: mvm: always init rs with 20mhz bandwidth rates
NFC: llcp: Limit size of SDP URI
rxrpc: Work around usercopy check
mac80211: round IEEE80211_TX_STATUS_HEADROOM up to multiple of 4
mac80211: fix a possible leak of station stats
mac80211: fix calling sleeping function in atomic context
mac80211: Do not disconnect on invalid operating class
md raid10: fix NULL deference in handle_write_completed()
drm/exynos: g2d: use monotonic timestamps
drm/exynos: fix comparison to bitshift when dealing with a mask
locking/xchg/alpha: Add unconditional memory barrier to cmpxchg()
md: raid5: avoid string overflow warning
kernel/relay.c: limit kmalloc size to KMALLOC_MAX_SIZE
powerpc/bpf/jit: Fix 32-bit JIT for seccomp_data access
s390/cio: fix ccw_device_start_timeout API
s390/cio: fix return code after missing interrupt
s390/cio: clear timer when terminating driver I/O
PKCS#7: fix direct verification of SignerInfo signature
ARM: OMAP: Fix dmtimer init for omap1
smsc75xx: fix smsc75xx_set_features()
regulatory: add NUL to request alpha2
integrity/security: fix digsig.c build error with header file
locking/xchg/alpha: Fix xchg() and cmpxchg() memory ordering bugs
x86/topology: Update the 'cpu cores' field in /proc/cpuinfo correctly across CPU hotplug operations
mac80211: drop frames with unexpected DS bits from fast-rx to slow path
arm64: fix unwind_frame() for filtered out fn for function graph tracing
macvlan: fix use-after-free in macvlan_common_newlink()
kvm: fix warning for CONFIG_HAVE_KVM_EVENTFD builds
fs: dcache: Avoid livelock between d_alloc_parallel and __d_add
fs: dcache: Use READ_ONCE when accessing i_dir_seq
md: fix a potential deadlock of raid5/raid10 reshape
md/raid1: fix NULL pointer dereference
batman-adv: fix packet checksum in receive path
batman-adv: invalidate checksum on fragment reassembly
netfilter: ebtables: convert BUG_ONs to WARN_ONs
batman-adv: Ignore invalid batadv_iv_gw during netlink send
batman-adv: Ignore invalid batadv_v_gw during netlink send
batman-adv: Fix netlink dumping of BLA claims
batman-adv: Fix netlink dumping of BLA backbones
nvme-pci: Fix nvme queue cleanup if IRQ setup fails
clocksource/drivers/fsl_ftm_timer: Fix error return checking
ceph: fix dentry leak when failing to init debugfs
ARM: orion5x: Revert commit
|
||
|
Pratyush Anand
|
c3655e72f8 |
arm64: fix unwind_frame() for filtered out fn for function graph tracing
[ Upstream commit |
||
|
Mark Rutland
|
0c7aad6502 |
UPSTREAM: arm64: prep stack walkers for THREAD_INFO_IN_TASK
When CONFIG_THREAD_INFO_IN_TASK is selected, task stacks may be freed
before a task is destroyed. To account for this, the stacks are
refcounted, and when manipulating the stack of another task, it is
necessary to get/put the stack to ensure it isn't freed and/or re-used
while we do so.
This patch reworks the arm64 stack walking code to account for this.
When CONFIG_THREAD_INFO_IN_TASK is not selected these perform no
refcounting, and this should only be a structural change that does not
affect behaviour.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: AKASHI Takahiro <takahiro.akashi@linaro.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit
|
||
|
Mark Rutland
|
abcc8cc3e4 |
UPSTREAM: arm64: unexport walk_stackframe
The walk_stackframe functions is architecture-specific, with a varying
prototype, and common code should not use it directly. None of its
current users can be built as modules. With THREAD_INFO_IN_TASK, users
will also need to hold a stack reference before calling it.
There's no reason for it to be exported, and it's very easy to misuse,
so unexport it for now.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit
|
||
|
Mark Rutland
|
ab96e216b6 |
UPSTREAM: arm64: factor out current_stack_pointer
We define current_stack_pointer in <asm/thread_info.h>, though other
files and header relying upon it do not have this necessary include, and
are thus fragile to changes in the header soup.
Subsequent patches will affect the header soup such that directly
including <asm/thread_info.h> may result in a circular header include in
some of these cases, so we can't simply include <asm/thread_info.h>.
Instead, factor current_thread_info into its own header, and have all
existing users include this explicitly.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
(cherry picked from commit
|
||
|
Mark Rutland
|
b5e7307d9d |
arm64: fix dump_backtrace/unwind_frame with NULL tsk
In some places, dump_backtrace() is called with a NULL tsk parameter, e.g. in bug_handler() in arch/arm64, or indirectly via show_stack() in core code. The expectation is that this is treated as if current were passed instead of NULL. Similar is true of unwind_frame(). Commit |
||
|
Pratyush Anand
|
98ab10e977 |
arm64: ftrace: add save_stack_trace_regs()
Currently, enabling stacktrace of a kprobe events generates warning: echo stacktrace > /sys/kernel/debug/tracing/trace_options echo "p xhci_irq" > /sys/kernel/debug/tracing/kprobe_events echo 1 > /sys/kernel/debug/tracing/events/kprobes/enable save_stack_trace_regs() not implemented yet. ------------[ cut here ]------------ WARNING: CPU: 1 PID: 0 at ../kernel/stacktrace.c:74 save_stack_trace_regs+0x3c/0x48 Modules linked in: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0-rc4-dirty #5128 Hardware name: ARM Juno development board (r1) (DT) task: ffff800975dd1900 task.stack: ffff800975ddc000 PC is at save_stack_trace_regs+0x3c/0x48 LR is at save_stack_trace_regs+0x3c/0x48 pc : [<ffff000008126c64>] lr : [<ffff000008126c64>] pstate: 600003c5 sp : ffff80097ef52c00 Call trace: save_stack_trace_regs+0x3c/0x48 __ftrace_trace_stack+0x168/0x208 trace_buffer_unlock_commit_regs+0x5c/0x7c kprobe_trace_func+0x308/0x3d8 kprobe_dispatcher+0x58/0x60 kprobe_breakpoint_handler+0xbc/0x18c brk_handler+0x50/0x90 do_debug_exception+0x50/0xbc This patch implements save_stack_trace_regs(), so that stacktrace of a kprobe events can be obtained. After this patch, there is no warning and we can see the stacktrace for kprobe events in trace buffer. more /sys/kernel/debug/tracing/trace <idle>-0 [004] d.h. 1356.000496: p_xhci_irq_0:(xhci_irq+0x0/0x9ac) <idle>-0 [004] d.h. 1356.000497: <stack trace> => xhci_irq => __handle_irq_event_percpu => handle_irq_event_percpu => handle_irq_event => handle_fasteoi_irq => generic_handle_irq => __handle_domain_irq => gic_handle_irq => el1_irq => arch_cpu_idle => default_idle_call => cpu_startup_entry => secondary_start_kernel => Tested-by: David A. Long <dave.long@linaro.org> Reviewed-by: James Morse <james.morse@arm.com> Signed-off-by: Pratyush Anand <panand@redhat.com> Signed-off-by: Will Deacon <will.deacon@arm.com> |
||
|
Yang Shi
|
a80a0eb70c |
arm64: make irq_stack_ptr more robust
Switching between stacks is only valid if we are tracing ourselves while on the
irq_stack, so it is only valid when in current and non-preemptible context,
otherwise is is just zeroed off.
Fixes:
|
||
|
Yang Shi
|
bcaf669b4b |
arm64: disable kasan when accessing frame->fp in unwind_frame
When boot arm64 kernel with KASAN enabled, the below error is reported by kasan: BUG: KASAN: out-of-bounds in unwind_frame+0xec/0x260 at addr ffffffc064d57ba0 Read of size 8 by task pidof/499 page:ffffffbdc39355c0 count:0 mapcount:0 mapping: (null) index:0x0 flags: 0x0() page dumped because: kasan: bad access detected CPU: 2 PID: 499 Comm: pidof Not tainted 4.5.0-rc1 #119 Hardware name: Freescale Layerscape 2085a RDB Board (DT) Call trace: [<ffffffc00008d078>] dump_backtrace+0x0/0x290 [<ffffffc00008d32c>] show_stack+0x24/0x30 [<ffffffc0006a981c>] dump_stack+0x8c/0xd8 [<ffffffc0002e4400>] kasan_report_error+0x558/0x588 [<ffffffc0002e4958>] kasan_report+0x60/0x70 [<ffffffc0002e3188>] __asan_load8+0x60/0x78 [<ffffffc00008c92c>] unwind_frame+0xec/0x260 [<ffffffc000087e60>] get_wchan+0x110/0x160 [<ffffffc0003b647c>] do_task_stat+0xb44/0xb68 [<ffffffc0003b7730>] proc_tgid_stat+0x40/0x50 [<ffffffc0003ac840>] proc_single_show+0x88/0xd8 [<ffffffc000345be8>] seq_read+0x370/0x770 [<ffffffc00030aba0>] __vfs_read+0xc8/0x1d8 [<ffffffc00030c0ec>] vfs_read+0x94/0x168 [<ffffffc00030d458>] SyS_read+0xb8/0x128 [<ffffffc000086530>] el0_svc_naked+0x24/0x28 Memory state around the buggy address: ffffffc064d57a80: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 f4 f4 ffffffc064d57b00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffffc064d57b80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ^ ffffffc064d57c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffffc064d57c80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Since the shadow byte pointed by the report is 0, so it may mean it is just hit oob in non-current task. So, disable the instrumentation to silence these warnings. Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Yang Shi <yang.shi@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> |
||
|
AKASHI Takahiro
|
20380bb390 |
arm64: ftrace: fix a stack tracer's output under function graph tracer
Function graph tracer modifies a return address (LR) in a stack frame
to hook a function return. This will result in many useless entries
(return_to_handler) showing up in
a) a stack tracer's output
b) perf call graph (with perf record -g)
c) dump_backtrace (at panic et al.)
For example, in case of a),
$ echo function_graph > /sys/kernel/debug/tracing/current_tracer
$ echo 1 > /proc/sys/kernel/stack_trace_enabled
$ cat /sys/kernel/debug/tracing/stack_trace
Depth Size Location (54 entries)
----- ---- --------
0) 4504 16 gic_raise_softirq+0x28/0x150
1) 4488 80 smp_cross_call+0x38/0xb8
2) 4408 48 return_to_handler+0x0/0x40
3) 4360 32 return_to_handler+0x0/0x40
...
In case of b),
$ echo function_graph > /sys/kernel/debug/tracing/current_tracer
$ perf record -e mem:XXX:x -ag -- sleep 10
$ perf report
...
| | |--0.22%-- 0x550f8
| | | 0x10888
| | | el0_svc_naked
| | | sys_openat
| | | return_to_handler
| | | return_to_handler
...
In case of c),
$ echo function_graph > /sys/kernel/debug/tracing/current_tracer
$ echo c > /proc/sysrq-trigger
...
Call trace:
[<ffffffc00044d3ac>] sysrq_handle_crash+0x24/0x30
[<ffffffc000092250>] return_to_handler+0x0/0x40
[<ffffffc000092250>] return_to_handler+0x0/0x40
...
This patch replaces such entries with real addresses preserved in
current->ret_stack[] at unwind_frame(). This way, we can cover all
the cases.
Reviewed-by: Jungseok Lee <jungseoklee85@gmail.com>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
[will: fixed minor context changes conflicting with irq stack bits]
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
||
|
AKASHI Takahiro
|
fe13f95b72 |
arm64: pass a task parameter to unwind_frame()
Function graph tracer modifies a return address (LR) in a stack frame
to hook a function's return. This will result in many useless entries
(return_to_handler) showing up in a call stack list.
We will fix this problem in a later patch ("arm64: ftrace: fix a stack
tracer's output under function graph tracer"). But since real return
addresses are saved in ret_stack[] array in struct task_struct,
unwind functions need to be notified of, in addition to a stack pointer
address, which task is being traced in order to find out real return
addresses.
This patch extends unwind functions' interfaces by adding an extra
argument of a pointer to task_struct.
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
||
|
James Morse
|
971c67ce37 |
arm64: reduce stack use in irq_handler
The code for switching to irq_stack stores three pieces of information on the stack, fp+lr, as a fake stack frame (that lets us walk back onto the interrupted tasks stack frame), and the address of the struct pt_regs that contains the register values from kernel entry. (which dump_backtrace() will print in any stack trace). To reduce this, we store fp, and the pointer to the struct pt_regs. unwind_frame() can recognise this as the irq_stack dummy frame, (as it only appears at the top of the irq_stack), and use the struct pt_regs values to find the missing interrupted link-register. Suggested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> |
||
|
James Morse
|
1ffe199b1c |
arm64: when walking onto the task stack, check sp & fp are in current->stack
When unwind_frame() reaches the bottom of the irq_stack, the last fp points to the original task stack. unwind_frame() uses IRQ_STACK_TO_TASK_STACK() to find the sp value. If either values is wrong, we may end up walking a corrupt stack. Check these values are sane by testing if they are both on the stack pointed to by current->stack. Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> |
||
|
AKASHI Takahiro
|
132cd887b5 |
arm64: Modify stack trace and dump for use with irq_stack
This patch allows unwind_frame() to traverse from interrupt stack to task stack correctly. It requires data from a dummy stack frame, created during irq_stack_entry(), added by a later patch. A similar approach is taken to modify dump_backtrace(), which expects to find struct pt_regs underneath any call to functions marked __exception. When on an irq_stack, the struct pt_regs is stored on the old task stack, the location of which is stored in the dummy stack frame. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> [james.morse: merged two patches, reworked for per_cpu irq_stacks, and no alignment guarantees, added irq_stack definitions] Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> |
||
|
Will Deacon
|
9702970c7b |
Revert "ARM64: unwind: Fix PC calculation"
This reverts commit
|
||
|
Behan Webster
|
bb28cec4ea |
arm64: LLVMLinux: Use current_stack_pointer in save_stack_trace_tsk
Use the global current_stack_pointer to get the value of the stack pointer. This change supports being able to compile the kernel with both gcc and clang. Signed-off-by: Behan Webster <behanw@converseincode.com> Signed-off-by: Mark Charlebois <charlebm@gmail.com> Reviewed-by: Jan-Simon Möller <dl9pf@gmx.de> Reviewed-by: Olof Johansson <olof@lixom.net> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> |
||
|
AKASHI Takahiro
|
26e2ae3999 |
arm64: Add 'notrace' attribute to unwind_frame() for ftrace
walk_stackframe() calls unwind_frame(), and if walk_stackframe() is "notrace", unwind_frame() should be also "notrace". Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com> |
||
|
Olof Johansson
|
e306dfd06f |
ARM64: unwind: Fix PC calculation
The frame PC value in the unwind code used to just take the saved LR value and use that. That's incorrect as a stack trace, since it shows the return path stack, not the call path stack. In particular, it shows faulty information in case the bl is done as the very last instruction of one label, since the return point will be in the next label. That can easily be seen with tail calls to panic(), which is marked __noreturn and thus doesn't have anything useful after it. Easiest here is to just correct the unwind code and do a -4, to get the actual call site for the backtrace instead of the return site. Signed-off-by: Olof Johansson <olof@lixom.net> Cc: stable@vger.kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Konstantin Khlebnikov
|
26920dd2da |
ARM64: fix framepointer check in unwind_frame
We need at least 24 bytes above frame pointer. Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Catalin Marinas
|
60ffc30d56 |
arm64: Exception handling
The patch contains the exception entry code (kernel/entry.S), pt_regs structure and related accessors, undefined instruction trapping and stack tracing. AArch64 Linux kernel (including kernel threads) runs in EL1 mode using the SP1 stack. The vectors don't have a fixed address, only alignment (2^11) requirements. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> |