It is not allowed to call kfree_skb() from hardware interrupt
context or with hardware interrupts being disabled.
So replace kfree_skb() with dev_kfree_skb_irq() under
spin_lock_irqsave(). Compile tested only.
Fixes: baac6276c0 ("Bluetooth: btusb: handle mSBC audio over USB Endpoints")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The quirks table was named "blacklist_table" which isn't a good
description for that table as devices detected using it weren't ignored
by the driver.
Rename the table to match what it actually does.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In the case of a Periodic Synchronized Receiver,
the PA report received from a Broadcaster contains the BASE,
which has information about codec and other parameters of a BIG.
This isnformation is stored and the application can retrieve it
using getsockopt(BT_ISO_BASE).
Signed-off-by: Claudia Draghicescu <claudia.rosu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Not calling hci_(dis)connect_cfm before deleting conn referred to by a
socket generally results to use-after-free.
When cleaning up SCO connections when the parent ACL is deleted too
early, use hci_conn_failed to do the connection cleanup properly.
We also need to clean up ISO connections in a similar situation when
connecting has started but LE Create CIS is not yet sent, so do it too
here.
Fixes: ca1fd42e7d ("Bluetooth: Fix potential double free caused by hci_conn_unlink")
Reported-by: syzbot+cf54c1da6574b6c1b049@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-bluetooth/00000000000013b93805fbbadc50@google.com/
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There a few instances still using HCI_MAX_AD_LENGTH instead of using
max_adv_len which takes care of detecting what is the actual maximum
length depending on if the controller supports EA or not.
Fixes: 112b5090c2 ("Bluetooth: MGMT: Fix always using HCI_MAX_AD_LENGTH")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This commit implements defer setup support for the Broadcast Sink
scenario: By setting defer setup on a broadcast socket before calling
listen, the user is able to trigger the PA sync and BIG sync procedures
separately.
This is useful if the user first wants to synchronize to the periodic
advertising transmitted by a Broadcast Source, and trigger the BIG sync
procedure later on.
If defer setup is set, once a PA sync established event arrives, a new
hcon is created and notified to the ISO layer. A child socket associated
with the PA sync connection will be added to the accept queue of the
listening socket.
Once the accept call returns the fd for the PA sync child socket, the
user should call read on that fd. This will trigger the BIG create sync
procedure, and the PA sync socket will become a listening socket itself.
When the BIG sync established event is notified to the ISO layer, the
bis connections will be added to the accept queue of the PA sync parent.
The user should call accept on the PA sync socket to get the final bis
connections.
Signed-off-by: Iulia Tanasescu <iulia.tanasescu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add support for the WCN7850 Bluetooth chipset.
Tested on the SM8550 QRD platform.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use switch/case to handle soc type specific behaviour,
the permit dropping the qca_is_xxx() inline functions
and make the code clearer and easier to update for new
SoCs.
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Suggested-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes sending BT_HCI_CMD_LE_CREATE_CONN_CANCEL when
hci_le_create_conn_sync has not been called because HCI_CONN_SCANNING
has been clear too early before its cmd_sync callback has been run.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use-after-free can occur in hci_disconnect_all_sync if a connection is
deleted by concurrent processing of a controller event.
To prevent this the code now tries to iterate over the list backwards
to ensure the links are cleanup before its parents, also it no longer
relies on a cursor, instead it always uses the last element since
hci_abort_conn_sync is guaranteed to call hci_conn_del.
UAF crash log:
==================================================================
BUG: KASAN: slab-use-after-free in hci_set_powered_sync
(net/bluetooth/hci_sync.c:5424) [bluetooth]
Read of size 8 at addr ffff888009d9c000 by task kworker/u9:0/124
CPU: 0 PID: 124 Comm: kworker/u9:0 Tainted: G W
6.5.0-rc1+ #10
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
1.16.2-1.fc38 04/01/2014
Workqueue: hci0 hci_cmd_sync_work [bluetooth]
Call Trace:
<TASK>
dump_stack_lvl+0x5b/0x90
print_report+0xcf/0x670
? __virt_addr_valid+0xdd/0x160
? hci_set_powered_sync+0x2c9/0x4a0 [bluetooth]
kasan_report+0xa6/0xe0
? hci_set_powered_sync+0x2c9/0x4a0 [bluetooth]
? __pfx_set_powered_sync+0x10/0x10 [bluetooth]
hci_set_powered_sync+0x2c9/0x4a0 [bluetooth]
? __pfx_hci_set_powered_sync+0x10/0x10 [bluetooth]
? __pfx_lock_release+0x10/0x10
? __pfx_set_powered_sync+0x10/0x10 [bluetooth]
hci_cmd_sync_work+0x137/0x220 [bluetooth]
process_one_work+0x526/0x9d0
? __pfx_process_one_work+0x10/0x10
? __pfx_do_raw_spin_lock+0x10/0x10
? mark_held_locks+0x1a/0x90
worker_thread+0x92/0x630
? __pfx_worker_thread+0x10/0x10
kthread+0x196/0x1e0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
</TASK>
Allocated by task 1782:
kasan_save_stack+0x33/0x60
kasan_set_track+0x25/0x30
__kasan_kmalloc+0x8f/0xa0
hci_conn_add+0xa5/0xa80 [bluetooth]
hci_bind_cis+0x881/0x9b0 [bluetooth]
iso_connect_cis+0x121/0x520 [bluetooth]
iso_sock_connect+0x3f6/0x790 [bluetooth]
__sys_connect+0x109/0x130
__x64_sys_connect+0x40/0x50
do_syscall_64+0x60/0x90
entry_SYSCALL_64_after_hwframe+0x6e/0xd8
Freed by task 695:
kasan_save_stack+0x33/0x60
kasan_set_track+0x25/0x30
kasan_save_free_info+0x2b/0x50
__kasan_slab_free+0x10a/0x180
__kmem_cache_free+0x14d/0x2e0
device_release+0x5d/0xf0
kobject_put+0xdf/0x270
hci_disconn_complete_evt+0x274/0x3a0 [bluetooth]
hci_event_packet+0x579/0x7e0 [bluetooth]
hci_rx_work+0x287/0xaa0 [bluetooth]
process_one_work+0x526/0x9d0
worker_thread+0x92/0x630
kthread+0x196/0x1e0
ret_from_fork+0x2c/0x50
==================================================================
Fixes: 182ee45da0 ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This improves the inband IR command handling for NXP BT chipsets.
When the IR vendor command is received, the driver injects a HW
error event, which causes a reset sequence in hci_error_reset().
The vendor IR command is sent to the controller while hci dev
is been closed, and FW is re-downloaded when nxp_setup() is
called during hci_dev_do_open().
The HCI_SETUP flag is set in nxp_hw_err() to make sure that
nxp_setup() is been called during hci_dev_do_open().
This also makes the nxp_setup() and power save functions more
generic.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support for NXP IW624 chipset in btnxpuart driver
by adding FW name and bootloader signature. Based on the
loader version bits 7:6 of the bootloader signature, the
driver can choose between selecting secure and non-secure
FW files.
For cmd5 payload during FW download, this chip has addresses
of few registers offset by 1, so added boot_reg_offset to
handle the chip specific offset.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This removes the unnecessary check for CTS low after FW download.
After FW download is complete, the CTS line is already seen low.
It becomes high after 2 msec, and low again after FW initialization
is complete.
This makes the current check for CTS low redundant.
This removes the wait for CTS low section and increase delay to
1200msec instead, which is sufficiant for all NXP chipsets to
initialize FW.
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Leon Romanovsky says:
====================
mlx5 MACsec RoCEv2 support
From Patrisious:
This series extends previously added MACsec offload support
to cover RoCE traffic either.
In order to achieve that, we need configure MACsec with offload between
the two endpoints, like below:
REMOTE_MAC=10:70:fd:43:71:c0
* ip addr add 1.1.1.1/16 dev eth2
* ip link set dev eth2 up
* ip link add link eth2 macsec0 type macsec encrypt on
* ip macsec offload macsec0 mac
* ip macsec add macsec0 tx sa 0 pn 1 on key 00 dffafc8d7b9a43d5b9a3dfbbf6a30c16
* ip macsec add macsec0 rx port 1 address $REMOTE_MAC
* ip macsec add macsec0 rx port 1 address $REMOTE_MAC sa 0 pn 1 on key 01 ead3664f508eb06c40ac7104cdae4ce5
* ip addr add 10.1.0.1/16 dev macsec0
* ip link set dev macsec0 up
And in a similar manner on the other machine, while noting the keys order
would be reversed and the MAC address of the other machine.
RDMA traffic is separated through relevant GID entries and in case
of IP ambiguity issue - meaning we have a physical GIDs and a MACsec
GIDs with the same IP/GID, we disable our physical GID in order
to force the user to only use the MACsec GID.
v0: https://lore.kernel.org/netdev/20230813064703.574082-1-leon@kernel.org/
* 'mlx5-next' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
RDMA/mlx5: Handles RoCE MACsec steering rules addition and deletion
net/mlx5: Add RoCE MACsec steering infrastructure in core
net/mlx5: Configure MACsec steering for ingress RoCEv2 traffic
net/mlx5: Configure MACsec steering for egress RoCEv2 traffic
IB/core: Reorder GID delete code for RoCE
net/mlx5: Add MACsec priorities in RDMA namespaces
RDMA/mlx5: Implement MACsec gid addition and deletion
net/mlx5: Maintain fs_id xarray per MACsec device inside macsec steering
net/mlx5: Remove netdevice from MACsec steering
net/mlx5e: Move MACsec flow steering and statistics database from ethernet to core
net/mlx5e: Rename MACsec flow steering functions/parameters to suit core naming style
net/mlx5: Remove dependency of macsec flow steering on ethernet
net/mlx5e: Move MACsec flow steering operations to be used as core library
macsec: add functions to get macsec real netdevice and check offload
====================
Link: https://lore.kernel.org/r/20230821073833.59042-1-leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the necessity to modify skb_ext_total_length() when new extension
types are added.
Also reduces the line count a bit.
With optimizations enabled the function is folded down to the same
constant value as before during compilation.
This has been validated on x86 with GCC 6.5.0 and 13.2.1.
Also a similar construct has been validated on godbolt.org with GCC 5.1.
In any case the compiler has to be able to evaluate the construct at
compile-time for the BUILD_BUG_ON() in skb_extensions_init().
Even if not evaluated at compile-time this function would only ever
be executed once at run-time, so the overhead would be very minuscule.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230823-skb_ext-simplify-v2-1-66e26cd66860@weissschuh.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These remove a redundant check from a driver's "remove" routine
and use module_platform_driver() to replace an open-coded version
of it in one driver.
* thermal-intel:
thermal: intel: intel_soc_dts_iosf: Remove redundant check
thermal: intel: int340x: simplify the code with module_platform_driver()
All required libraries have been imported and make sure that none of
them are external dependencies. To achieve this, created a virt env and
verified.
Modified usage information and added combined command.
Modified the main() function to read the --save-only command-line option
and set the output_file variable accordingly.
Modified the trace_end() function to check for the output_file variable.
If it is set, the profiler data is saved to a local file in Gecko
Profile format, or the profiler.firefox.com is opened on the default
browser.
Included trace_begin() to initialize the Firefox Profiler and launch the
default browser to display the profiler.firefox.com.
Added a new function launchFirefox() to start a local server and launch
the profiler UI on the default browser with the appropriate URL.
Created the "CORSRequestHandler" class to enable Cross-Origin Resource
Sharing.
Summary:
This integration now includes a exiting feature to conveniently host the
Gecko Profile data on a local server and open it directly in the default
web browser.
This means that users can now effortlessly visualize and analyze the
profiler results with just a single click.
The addition of the --save-only command-line option allows users to save
the profiler output to a local file in Gecko Profile format, but the
real highlight lies in the capability to seamlessly launch a local
server, making the data accessible to Firefox Profiler via a web
browser.
In addition, it's important to highlight that all data are hosted
locally, eliminating any concerns about data privacy rules and
regulations.
Signed-off-by: Anup Sharma <anupnewsmail@gmail.com>
Tested-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/ZNOS0vo58DnVLpD8@yoga
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
After receiving the location(s) of the DS server(s) in the
GETDEVINCEINFO, create the request for the clientid to such
server and indicate that the client is connecting to a DS.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Ensure that the connect timeout for the pNFS flexfiles driver is of the
same order as the I/O timeout, so that we can fail over quickly when
trying to read from a data server that is down.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the caller specifies the connect timeouts in the arguments to
rpc_clnt_add_xprt(), then we shouldn't override them.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When we create a TCP transport, the connect timeout parameters are
currently fixed to be 90s. This is problematic in the pNFS flexfiles
case, where we may have multiple mirrors, and we would like to fail over
quickly to the next mirror if a data server is down.
This patch adds the ability to specify the connection parameters at RPC
client creation time.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Instead of requiring the requests to redrive the connection several
times, just let the TCP connect code manage it now that we've adjusted
the TCP_SYNCNT value.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We must ensure that the subrequests are joined back into the head before
we can retransmit a request. If the head was not on the commit lists,
because the server wrote it synchronously, we still need to add it back
to the retransmission list.
Add a call that mirrors the effect of nfs_cancel_remove_inode() for
O_DIRECT.
Fixes: ed5d588fe4 ("NFS: Try to join page groups before an O_DIRECT retransmission")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When a directory contains 17 files (except . and ..), nfs client sends
a redundant readdir request after get eof.
A simple reproduce,
At NFS server, create a directory with 17 files under exported directory.
# mkdir test
# cd test
# for i in {0..16} ; do touch $i; done
At NFS client, no matter mounting through nfsv3 or nfsv4,
does ls (or ll) at the created test directory.
A tshark output likes following (for nfsv4),
# tshark -i eth0 tcp port 2049 -Tfields -e ip.src -e ip.dst -e nfs -e nfs.cookie4
srcip dstip SEQUENCE, PUTFH, READDIR 0
dstip srcip SEQUENCE PUTFH READDIR 909539109313539306,2108391201987888856,2305312124304486544,2566335452463141496,2978225129081509984,4263037479923412583,4304697173036510679,4666703455469210097,4759208201298769007,4776701232145978803,5338408478512081262,5949498658935544804,5971526429894832903,6294060338267709855,6528840566229532529,8600463293536422524,9223372036854775807
srcip dstip
srcip dstip SEQUENCE, PUTFH, READDIR 9223372036854775807
dstip srcip SEQUENCE PUTFH READDIR
The READDIR with cookie 9223372036854775807(0x7FFFFFFFFFFFFFFF) is redundant.
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
This allocation should use the passed in GFP_ flags instead of
GFP_KERNEL. One places where this matters is in filelayout_pg_init_write()
which uses GFP_NOFS as the allocation flags.
Fixes: 5c83746a0c ("pnfs/blocklayout: in-kernel GETDEVICEINFO XDR parsing")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The following checkpatch errors are removed:
ERROR: "foo * bar" should be "foo *bar"
"foo * bar" should be "foo *bar"
Signed-off-by: ZhiHu <huzhi001@208suo.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
It is an almost improbable error case but when page allocating loop in
nfs4_get_device_info() fails then we should only free the already
allocated pages, as __free_page() can't deal with NULL arguments.
Found by Linux Verification Center (linuxtesting.org).
Cc: stable@vger.kernel.org
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
module.h, clnt.h, addr.h and dns_resolve.h is always included whether
CONFIG_NFS_USE_KERNEL_DNS is set or not and their order does not seems
to matter.
Move them outside the ifdef to simplify code and avoid checkincludes
message.
Signed-off-by: GUO Zihua <guozihua@huawei.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Current audio-graph-card functions definition are like below
(A)' static int graph_get_dais_count();
(B) int audio_graph_parse_of(...)
{
...
(A) ret = graph_get_dais_count();
...
}
(A) static int graph_get_dais_count(...)
{
...
}
(C)
We don't need to have (A)' definition if audio_graph_parse_of() (B) was
defined at (C). This patch moves (B) to (C).
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87r0ntmc3c.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org
yamllint has a quoted string check. Enable the check aligned with the
DT schema style which is only using quotes when necessary with the
exception of regex patterns. There's also the frequent occurrence of '/'
which we allow rather than fixing.
Link: https://lore.kernel.org/all/20230324202243.2442956-1-robh@kernel.org/
Signed-off-by: Rob Herring <robh@kernel.org>
