[ Upstream commit cbb79863fc ]
If something has the IPMI driver open, don't allow the device
module to be unloaded. Before it would unload and the user would
get errors on use.
This change is made on user request, and it makes it consistent
with the I2C driver, which has the same behavior.
It does change things a little bit with respect to kernel users.
If the ACPI or IPMI watchdog (or any other kernel user) has
created a user, then the device module cannot be unloaded. Before
it could be unloaded,
This does not affect hot-plug. If the device goes away (it's on
something removable that is removed or is hot-removed via sysfs)
then it still behaves as it did before.
Reported-by: tony camuso <tcamuso@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: tony camuso <tcamuso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eaecce12f5 ]
When unloading omap3-rom-rng, we'll get the following:
WARNING: CPU: 0 PID: 100 at drivers/clk/clk.c:948 clk_core_disable
This is because the clock may be already disabled by omap3_rom_rng_idle().
Let's fix the issue by checking for rng_idle on exit.
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Adam Ford <aford173@gmail.com>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Fixes: 1c6b7c2108 ("hwrng: OMAP3 ROM Random Number Generator support")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit be867f987a upstream.
Existing RNG data read timeout is 200us but it doesn't cover EIP76 RNG
data rate which takes approx. 700us to produce 16 bytes of output data
as per testing results. So configure the timeout as 1000us to also take
account of lack of udelay()'s reliability.
Fixes: 383212425c ("hwrng: omap - Add device variant for SafeXcel IP-76 found in Armada 8K")
Cc: <stable@vger.kernel.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 45a2d64696 upstream.
The layout of struct timeval is different on sparc64 from
anything else, and the patch I did long ago failed to take
this into account.
Change it now to handle sparc64 user space correctly again.
Quite likely nobody cares about parallel ports on sparc64,
but there is no reason not to fix it.
Cc: stable@vger.kernel.org
Fixes: 9a45048408 ("lp: support 64-bit time_t user space")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20191108203435.112759-7-arnd@arndb.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d791cfcbf9 upstream.
When we hot unplug a virtserialport and then try to hot plug again,
it fails:
(qemu) chardev-add socket,id=serial0,path=/tmp/serial0,server,nowait
(qemu) device_add virtserialport,bus=virtio-serial0.0,nr=2,\
chardev=serial0,id=serial0,name=serial0
(qemu) device_del serial0
(qemu) device_add virtserialport,bus=virtio-serial0.0,nr=2,\
chardev=serial0,id=serial0,name=serial0
kernel error:
virtio-ports vport2p2: Error allocating inbufs
qemu error:
virtio-serial-bus: Guest failure in adding port 2 for device \
virtio-serial0.0
This happens because buffers for the in_vq are allocated when the port is
added but are not released when the port is unplugged.
They are only released when virtconsole is removed (see a7a69ec0d8)
To avoid the problem and to be symmetric, we could allocate all the buffers
in init_vqs() as they are released in remove_vqs(), but it sounds like
a waste of memory.
Rather than that, this patch changes add_port() logic to ignore ENOSPC
error in fill_queue(), which means queue has already been filled.
Fixes: a7a69ec0d8 ("virtio_console: free buffers after reset")
Cc: mst@redhat.com
Cc: stable@vger.kernel.org
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a5e9f55709 ]
In commit 9f480faec5 ("crypto: chacha20 - Fix keystream alignment for
chacha20_block()"), I had missed that chacha20_block() can be called
directly on the buffer passed to get_random_bytes(), which can have any
alignment. So, while my commit didn't break anything, it didn't fully
solve the alignment problems.
Revert my solution and just update chacha20_block() to use
put_unaligned_le32(), so the output buffer need not be aligned.
This is simpler, and on many CPUs it's the same speed.
But, I kept the 'tmp' buffers in extract_crng_user() and
_get_random_bytes() 4-byte aligned, since that alignment is actually
needed for _crng_backtrack_protect() too.
Reported-by: Stephan Müller <smueller@chronox.de>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 060e8fb53f ]
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/char/ipmi/ipmi_msghandler.c: In function 'ipmi_set_my_LUN':
drivers/char/ipmi/ipmi_msghandler.c:1335:13: warning:
variable 'rv' set but not used [-Wunused-but-set-variable]
int index, rv = 0;
'rv' should be the correct return value.
Fixes: 048f7c3e35 ("ipmi: Properly release srcu locks on error conditions")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1574608f5f ]
Looking at logs from systems all over the place, it looks like tons
of broken systems exist that set the base address to zero. I can
only guess that is some sort of non-standard idea to mark the
interface as not being present. It can't be zero, anyway, so just
complain and ignore it.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97a103e6b5 ]
Shifting unsigned char b by an int type can lead to sign-extension
overflow. For example, if b is 0xff and the shift is 24, then top
bit is sign-extended so the final value passed to writeq has all
the upper 32 bits set. Fix this by casting b to a 64 bit unsigned
before the shift.
Detected by CoverityScan, CID#1465246 ("Unintended sign extension")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01508d9ebf ]
I noticed that 4.17.0 logs the follwing during ipmi_si setup:
ipmi_si 0000:01:04.6: probing via PCI
(NULL device *): Could not setup I/O space
ipmi_si 0000:01:04.6: [mem 0xf5ef0000-0xf5ef00ff] regsize 1 spacing 1 irq 21
Fix the "NULL device *) by moving io.dev assignment before its potential
use by ipmi_pci_probe_regspacing().
Result:
ipmi_si 0000:01:04.6: probing via PCI
ipmi_si 0000:01:04.6: Could not setup I/O space
ipmi_si 0000:01:04.6: [mem 0xf5ef0000-0xf5ef00ff] regsize 1 spacing 1 irq 21
Signed-off-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 340ff31ab0 ]
ipmi_thread() uses back-to-back schedule() to poll for command
completion which, on some machines, can push up CPU consumption and
heavily tax the scheduler locks leading to noticeable overall
performance degradation.
This was originally added so firmware updates through IPMI would
complete in a timely manner. But we can't kill the scheduler
locks for that one use case.
Instead, only run schedule() continuously in maintenance mode,
where firmware updates should run.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 78887832e7 upstream.
add_early_randomness() is called by hwrng_register() when the
hardware is added. If this hardware and its module are present
at boot, and if there is no data available the boot hangs until
data are available and can't be interrupted.
For instance, in the case of virtio-rng, in some cases the host can be
not able to provide enough entropy for all the guests.
We can have two easy ways to reproduce the problem but they rely on
misconfiguration of the hypervisor or the egd daemon:
- if virtio-rng device is configured to connect to the egd daemon of the
host but when the virtio-rng driver asks for data the daemon is not
connected,
- if virtio-rng device is configured to connect to the egd daemon of the
host but the egd daemon doesn't provide data.
The guest kernel will hang at boot until the virtio-rng driver provides
enough data.
To avoid that, call rng_get_data() in non-blocking mode (wait=0)
from add_early_randomness().
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Fixes: d9e7972619 ("hwrng: add randomness to system from rng...")
Cc: <stable@vger.kernel.org>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8619e5bdee upstream.
syzbot found that a thread can stall for minutes inside read_mem() or
write_mem() after that thread was killed by SIGKILL [1]. Reading from
iomem areas of /dev/mem can be slow, depending on the hardware.
While reading 2GB at one read() is legal, delaying termination of killed
thread for minutes is bad. Thus, allow reading/writing /dev/mem and
/dev/kmem to be preemptible and killable.
[ 1335.912419][T20577] read_mem: sz=4096 count=2134565632
[ 1335.943194][T20577] read_mem: sz=4096 count=2134561536
[ 1335.978280][T20577] read_mem: sz=4096 count=2134557440
[ 1336.011147][T20577] read_mem: sz=4096 count=2134553344
[ 1336.041897][T20577] read_mem: sz=4096 count=2134549248
Theoretically, reading/writing /dev/mem and /dev/kmem can become
"interruptible". But this patch chose "killable". Future patch will make
them "interruptible" so that we can revert to "killable" if some program
regressed.
[1] https://syzkaller.appspot.com/bug?id=a0e3436829698d5824231251fad9d8e998f94f5e
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: stable <stable@vger.kernel.org>
Reported-by: syzbot <syzbot+8ab2d0f39fb79fe6ca40@syzkaller.appspotmail.com>
Link: https://lore.kernel.org/r/1566825205-10703-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 62f95ae805 ]
Newer combinations of the glibc, kernel and openssh can result in long initial
startup times on OMAP devices:
[ 6.671425] systemd-rc-once[102]: Creating ED25519 key; this may take some time ...
[ 142.652491] systemd-rc-once[102]: Creating ED25519 key; done.
due to the blocking getrandom(2) system call:
[ 142.610335] random: crng init done
Set the quality level for the omap hwrng driver allowing the kernel to use the
hwrng as an entropy source at boot.
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4b0a2c5ff7 ]
For regular serial ports we do not initialize value of vtermno
variable. A garbage value is assigned for non console ports.
The value can be observed as a random integer with [1].
[1] vim /sys/kernel/debug/virtio-ports/vport*p*
This patch initialize the value of vtermno for console serial
ports to '1' and regular serial ports are initiaized to '0'.
Reported-by: siliu@redhat.com
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7d5dc2107 ]
The per-CPU variable batched_entropy_uXX is protected by get_cpu_var().
This is just a preempt_disable() which ensures that the variable is only
from the local CPU. It does not protect against users on the same CPU
from another context. It is possible that a preemptible context reads
slot 0 and then an interrupt occurs and the same value is read again.
The above scenario is confirmed by lockdep if we add a spinlock:
| ================================
| WARNING: inconsistent lock state
| 5.1.0-rc3+ #42 Not tainted
| --------------------------------
| inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
| ksoftirqd/9/56 [HC0[0]:SC1[1]:HE0:SE0] takes:
| (____ptrval____) (batched_entropy_u32.lock){+.?.}, at: get_random_u32+0x3e/0xe0
| {SOFTIRQ-ON-W} state was registered at:
| _raw_spin_lock+0x2a/0x40
| get_random_u32+0x3e/0xe0
| new_slab+0x15c/0x7b0
| ___slab_alloc+0x492/0x620
| __slab_alloc.isra.73+0x53/0xa0
| kmem_cache_alloc_node+0xaf/0x2a0
| copy_process.part.41+0x1e1/0x2370
| _do_fork+0xdb/0x6d0
| kernel_thread+0x20/0x30
| kthreadd+0x1ba/0x220
| ret_from_fork+0x3a/0x50
…
| other info that might help us debug this:
| Possible unsafe locking scenario:
|
| CPU0
| ----
| lock(batched_entropy_u32.lock);
| <Interrupt>
| lock(batched_entropy_u32.lock);
|
| *** DEADLOCK ***
|
| stack backtrace:
| Call Trace:
…
| kmem_cache_alloc_trace+0x20e/0x270
| ipmi_alloc_recv_msg+0x16/0x40
…
| __do_softirq+0xec/0x48d
| run_ksoftirqd+0x37/0x60
| smpboot_thread_fn+0x191/0x290
| kthread+0xfe/0x130
| ret_from_fork+0x3a/0x50
Add a spinlock_t to the batched_entropy data structure and acquire the
lock while accessing it. Acquire the lock with disabled interrupts
because this function may be used from interrupt context.
Remove the batched_entropy_reset_lock lock. Now that we have a lock for
the data scructure, we can access it from a remote CPU.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe6f1a6a8e ]
When the system boots with random.trust_cpu=1 it doesn't initialize the
per-NUMA CRNGs because it skips the rest of the CRNG startup code. This
means that the code from 1e7f583af6 ("random: make /dev/urandom scalable
for silly userspace programs") is not used when random.trust_cpu=1.
crash> dmesg | grep random:
[ 0.000000] random: get_random_bytes called from start_kernel+0x94/0x530 with crng_init=0
[ 0.314029] random: crng done (trusting CPU's manufacturer)
crash> print crng_node_pool
$6 = (struct crng_state **) 0x0
After adding the missing call to numa_crng_init() the per-NUMA CRNGs are
initialized again:
crash> dmesg | grep random:
[ 0.000000] random: get_random_bytes called from start_kernel+0x94/0x530 with crng_init=0
[ 0.314031] random: crng done (trusting CPU's manufacturer)
crash> print crng_node_pool
$1 = (struct crng_state **) 0xffff9a915f4014a0
The call to invalidate_batched_entropy() was also missing. This is
important for architectures like PPC and S390 which only have the
arch_get_random_seed_* functions.
Fixes: 39a8883a2b ("random: add a config option to trust the CPU's hwrng")
Signed-off-by: Jon DeVree <nuxi@vault24.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 55be8658c7 upstream.
According to ipmi spec, block number is a number that is incremented,
starting with 0, for each new block of message data returned using the
middle transaction.
Here, the 'blocknum' is data[0] which always starts from zero(0) and
'ssif_info->multi_pos' starts from 1.
So, we need to add +1 to blocknum while comparing with multi_pos.
Fixes: 7d6380cd40 ("ipmi:ssif: Fix handling of multi-part return messages").
Reported-by: Kiran Kolukuluru <kirank@ami.com>
Signed-off-by: Kamlakant Patel <kamlakantp@marvell.com>
Message-Id: <1556106615-18722-1-git-send-email-kamlakantp@marvell.com>
[Also added a debug log if the block numbers don't match.]
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org # 4.4
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a885bcfd15 ]
The intended behavior of function ipmi_hardcode_init_one() is to default
to kcs interface when no type argument is presented when initializing
ipmi with hard coded addresses.
However, the array of char pointers allocated on the stack by function
ipmi_hardcode_init() was not inited to zeroes, so it contained stack
debris.
Consequently, passing the cruft stored in this array to function
ipmi_hardcode_init_one() caused a crash when it was unable to detect
that the char * being passed was nonsense and tried to access the
address specified by the bogus pointer.
The fix is simply to initialize the si_type array to zeroes, so if
there were no type argument given to at the command line, function
ipmi_hardcode_init_one() could properly default to the kcs interface.
Signed-off-by: Tony Camuso <tcamuso@redhat.com>
Message-Id: <1554837603-40299-1-git-send-email-tcamuso@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c7084edc3f upstream.
The n_r3964 line discipline driver was written in a different time, when
SMP machines were rare, and users were trusted to do the right thing.
Since then, the world has moved on but not this code, it has stayed
rooted in the past with its lovely hand-crafted list structures and
loads of "interesting" race conditions all over the place.
After attempting to clean up most of the issues, I just gave up and am
now marking the driver as BROKEN so that hopefully someone who has this
hardware will show up out of the woodwork (I know you are out there!)
and will help with debugging a raft of changes that I had laying around
for the code, but was too afraid to commit as odds are they would break
things.
Many thanks to Jann and Linus for pointing out the initial problems in
this codebase, as well as many reviews of my attempts to fix the issues.
It was a case of whack-a-mole, and as you can see, the mole won.
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[ Upstream commit 24d48a61f2 ]
Commit '3d035f580699 ("drivers/char/hpet.c: allow user controlled mmap for
user processes")' introduced a new kernel command line parameter hpet_mmap,
that is required to expose the memory map of the HPET registers to
user-space. Unfortunately the kernel command line parameter 'hpet_mmap' is
broken and never takes effect due to missing '=' character in the __setup()
code of hpet_mmap_enable.
Before this patch:
dmesg output with the kernel command line parameter hpet_mmap=1
[ 0.204152] HPET mmap disabled
dmesg output with the kernel command line parameter hpet_mmap=0
[ 0.204192] HPET mmap disabled
After this patch:
dmesg output with the kernel command line parameter hpet_mmap=1
[ 0.203945] HPET mmap enabled
dmesg output with the kernel command line parameter hpet_mmap=0
[ 0.204652] HPET mmap disabled
Fixes: 3d035f5806 ("drivers/char/hpet.c: allow user controlled mmap for user processes")
Signed-off-by: Buland Singh <bsingh@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aef027db48 ]
The virtio-rng driver uses a completion called have_data to wait for a
virtio read to be fulfilled by the hypervisor. The completion is reset
before placing a buffer on the virtio queue and completed by the virtio
callback once data has been written into the buffer.
Prior to this commit, the driver called init_completion on this
completion both during probe as well as when registering virtio buffers
as part of a hwrng read operation. The second of these init_completion
calls should instead be reinit_completion because the have_data
completion has already been inited by probe. As described in
Documentation/scheduler/completion.txt, "Calling init_completion() twice
on the same completion object is most likely a bug".
This bug was present in the initial implementation of virtio-rng in
f7f510ec19 ("virtio: An entropy device, as suggested by hpa"). Back
then the have_data completion was a single static completion rather than
a member of one of potentially multiple virtrng_info structs as
implemented later by 08e53fbdb8 ("virtio-rng: support multiple
virtio-rng devices"). The original driver incorrectly used
init_completion rather than INIT_COMPLETION to reset have_data during
read.
Tested by running `head -c48 /dev/random | hexdump` within crosvm, the
Chrome OS virtual machine monitor, and confirming that the virtio-rng
driver successfully produces random bytes from the host.
Signed-off-by: David Tolnay <dtolnay@gmail.com>
Tested-by: David Tolnay <dtolnay@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Backport from 41b766d661
When excuting a command like:
modprobe ipmi_si ports=0xffc0e3 type=bt
The system would get an oops.
The trouble here is that ipmi_si_hardcode_find_bmc() is called before
ipmi_si_platform_init(), but initialization of the hard-coded device
creates an IPMI platform device, which won't be initialized yet.
The real trouble is that hard-coded devices aren't created with
any device, and the fixup is done later. So do it right, create the
hard-coded devices as normal platform devices.
This required adding some new resource types to the IPMI platform
code for passing information required by the hard-coded device
and adding some code to remove the hard-coded platform devices
on module removal.
To enforce the "hard-coded devices passed by the user take priority
over firmware devices" rule, some special code was added to check
and see if a hard-coded device already exists.
The backport required some minor fixups and adding the device
id table that had been added in another change and was used
in this one.
Reported-by: Yang Yingliang <yangyingliang@huawei.com>
Cc: stable@vger.kernel.org # v4.15+
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3d7a850fdc upstream.
The current approach to read first 6 bytes from the response and then tail
of the response, can cause the 2nd memcpy_fromio() to do an unaligned read
(e.g. read 32-bit word from address aligned to a 16-bits), depending on how
memcpy_fromio() is implemented. If this happens, the read will fail and the
memory controller will fill the read with 1's.
This was triggered by 170d13ca3a, which should be probably refined to
check and react to the address alignment. Before that commit, on x86
memcpy_fromio() turned out to be memcpy(). By a luck GCC has done the right
thing (from tpm_crb's perspective) for us so far, but we should not rely on
that. Thus, it makes sense to fix this also in tpm_crb, not least because
the fix can be then backported to stable kernels and make them more robust
when compiled in differing environments.
Cc: stable@vger.kernel.org
Cc: James Morris <jmorris@namei.org>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Jerry Snitselaar <jsnitsel@redhat.com>
Fixes: 30fc8d138e ("tpm: TPM 2.0 CRB Interface")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d7ac3c6ef5 upstream.
IndexCard is indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/char/applicom.c:418 ac_write() warn: potential spectre issue 'apbs' [r]
drivers/char/applicom.c:728 ac_ioctl() warn: potential spectre issue 'apbs' [r] (local cap)
Fix this by sanitizing IndexCard before using it to index apbs.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 701956d401 upstream.
ipcnum is indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/char/mwave/mwavedd.c:299 mwave_ioctl() warn: potential spectre issue 'pDrvData->IPCs' [w] (local cap)
Fix this by sanitizing ipcnum before using it to index pDrvData->IPCs.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 913a89f009 upstream.
The IPMI driver was recently modified to use SRCU, but it turns out
this uses a chunk of percpu memory, even if IPMI is never used.
So modify thing to on initialize on the first use. There was already
code to sort of handle this for handling init races, so piggy back
on top of that, and simplify it in the process.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reported-by: Tejun Heo <tj@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # 4.18
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7d6380cd40 upstream.
The block number was not being compared right, it was off by one
when checking the response.
Some statistics wouldn't be incremented properly in some cases.
Check to see if that middle-part messages always have 31 bytes of
data.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org # 4.4
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 479d6b39b9 upstream.
Some IPMI modules (e.g. ibmpex_msg_handler()) will have ipmi_usr_hdlr
handlers that call ipmi_free_recv_msg() directly. This will essentially
kfree(msg), leading to use-after-free.
This does not happen in the ipmi_devintf module, which will queue the
message and run ipmi_free_recv_msg() later.
BUG: KASAN: use-after-free in deliver_response+0x12f/0x1b0
Read of size 8 at addr ffff888a7bf20018 by task ksoftirqd/3/27
CPU: 3 PID: 27 Comm: ksoftirqd/3 Tainted: G O 4.19.11-amd64-ani99-debug #12.0.1.601133+pv
Hardware name: AppNeta r1000/X11SPW-TF, BIOS 2.1a-AP 09/17/2018
Call Trace:
dump_stack+0x92/0xeb
print_address_description+0x73/0x290
kasan_report+0x258/0x380
deliver_response+0x12f/0x1b0
? ipmi_free_recv_msg+0x50/0x50
deliver_local_response+0xe/0x50
handle_one_recv_msg+0x37a/0x21d0
handle_new_recv_msgs+0x1ce/0x440
...
Allocated by task 9885:
kasan_kmalloc+0xa0/0xd0
kmem_cache_alloc_trace+0x116/0x290
ipmi_alloc_recv_msg+0x28/0x70
i_ipmi_request+0xb4a/0x1640
ipmi_request_settime+0x1b8/0x1e0
...
Freed by task 27:
__kasan_slab_free+0x12e/0x180
kfree+0xe9/0x280
deliver_response+0x122/0x1b0
deliver_local_response+0xe/0x50
handle_one_recv_msg+0x37a/0x21d0
handle_new_recv_msgs+0x1ce/0x440
tasklet_action_common.isra.19+0xc4/0x250
__do_softirq+0x11f/0x51f
Fixes: e86ee2d44b ("ipmi: Rework locking and shutdown for hot remove")
Cc: stable@vger.kernel.org # 4.18
Signed-off-by: Fred Klassen <fklassen@appneta.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a7102c7461 upstream.
channel and addr->channel are indirectly controlled by user-space,
hence leading to a potential exploitation of the Spectre variant 1
vulnerability.
These issues were detected with the help of Smatch:
drivers/char/ipmi/ipmi_msghandler.c:1381 ipmi_set_my_address() warn: potential spectre issue 'user->intf->addrinfo' [w] (local cap)
drivers/char/ipmi/ipmi_msghandler.c:1401 ipmi_get_my_address() warn: potential spectre issue 'user->intf->addrinfo' [r] (local cap)
drivers/char/ipmi/ipmi_msghandler.c:1421 ipmi_set_my_LUN() warn: potential spectre issue 'user->intf->addrinfo' [w] (local cap)
drivers/char/ipmi/ipmi_msghandler.c:1441 ipmi_get_my_LUN() warn: potential spectre issue 'user->intf->addrinfo' [r] (local cap)
drivers/char/ipmi/ipmi_msghandler.c:2260 check_addr() warn: potential spectre issue 'intf->addrinfo' [r] (local cap)
Fix this by sanitizing channel and addr->channel before using them to
index user->intf->addrinfo and intf->addrinfo, correspondingly.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 01f54664a4 upstream.
First, rename out_no_locality to out_locality for bailing out on
both tpm_cmd_ready() and tpm_request_locality() failure.
Second, ignore the return value of go_to_idle() as it may override
the return value of the actual tpm operation, the go_to_idle() error
will be caught on any consequent command.
Last, fix the wrong 'goto out', that jumped back instead of forward.
Cc: stable@vger.kernel.org
Fixes: 627448e85c ("tpm: separate cmd_ready/go_idle from runtime_pm")
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 84b59f6487 upstream.
When checking whether the response is large enough to be able to contain
the received random bytes in tpm_get_random() and tpm2_get_random(),
they fail to take account the header size, which should be added to the
minimum size. This commit fixes this issue.
Cc: stable@vger.kernel.org
Fixes: c659af78eb ("tpm: Check size of response before accessing data")
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e487a0f523 upstream.
Functionality of the xen-tpmfront driver was lost secondary to
the introduction of xenbus multi-page support in commit ccc9d90a9a
("xenbus_client: Extend interface to support multi-page ring").
In this commit pointer to location of where the shared page address
is stored was being passed to the xenbus_grant_ring() function rather
then the address of the shared page itself. This resulted in a situation
where the driver would attach to the vtpm-stubdom but any attempt
to send a command to the stub domain would timeout.
A diagnostic finding for this regression is the following error
message being generated when the xen-tpmfront driver probes for a
device:
<3>vtpm vtpm-0: tpm_transmit: tpm_send: error -62
<3>vtpm vtpm-0: A TPM error (-62) occurred attempting to determine
the timeouts
This fix is relevant to all kernels from 4.1 forward which is the
release in which multi-page xenbus support was introduced.
Daniel De Graaf formulated the fix by code inspection after the
regression point was located.
Fixes: ccc9d90a9a ("xenbus_client: Extend interface to support multi-page ring")
Signed-off-by: Dr. Greg Wettstein <greg@enjellic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[boris: Updated commit message, added Fixes tag]
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: stable@vger.kernel.org # v4.1+
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
[ Upstream commit 0d6d0d62d9 ]
For TPM 1.2 chips the system setup utility allows to set the TPM device in
one of the following states:
* Active: Security chip is functional
* Inactive: Security chip is visible, but is not functional
* Disabled: Security chip is hidden and is not functional
When choosing the "Inactive" state, the TPM 1.2 device is enumerated and
registered, but sending TPM commands fail with either TPM_DEACTIVATED or
TPM_DISABLED depending if the firmware deactivated or disabled the TPM.
Since these TPM 1.2 error codes don't have special treatment, inactivating
the TPM leads to a very noisy kernel log buffer that shows messages like
the following:
tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
tpm tpm0: TPM is disabled/deactivated (0x6)
tpm tpm0: A TPM error (6) occurred attempting get random
tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
ima: No TPM chip found, activating TPM-bypass! (rc=6)
tpm tpm0: A TPM error (6) occurred attempting get random
tpm tpm0: A TPM error (6) occurred attempting get random
tpm tpm0: A TPM error (6) occurred attempting get random
tpm tpm0: A TPM error (6) occurred attempting get random
Let's just suppress error log messages for the TPM_{DEACTIVATED,DISABLED}
return codes, since this is expected when the TPM 1.2 is set to Inactive.
In that case the kernel log is cleaner and less confusing for users, i.e:
tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
tpm tpm0: TPM is disabled/deactivated (0x6)
ima: No TPM chip found, activating TPM-bypass! (rc=6)
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull IPMI bugfixes from Corey Minyard:
"A few fixes that came around or after the merge window, except for
commit cd2315d471 ("ipmi: kcs_bmc: don't change device name") which
is for a driver that very few people use, and those people need the
change"
* tag 'for-linus-4.19' of git://github.com/cminyard/linux-ipmi:
ipmi: Fix NULL pointer dereference in ssif_probe
ipmi: Fix I2C client removal in the SSIF driver
ipmi: Move BT capabilities detection to the detect call
ipmi: Rework SMI registration failure
ipmi: kcs_bmc: don't change device name
