commit 6ae01050e4 upstream.
Use our default values when wrong module-parameters are given, instead of
refusing to load. Refusing to load leaves the fan at the BIOS default
setting, which is "Off". The CPU's thermal throttling should protect the
system from damage, but not-loading is really not the best fallback in this
case.
This commit fixes this by re-setting module-parameter values to their
defaults if they are out of range, instead of failing the probe with
-EINVAL.
Cc: stable@vger.kernel.org
Cc: Jason Anderson <jasona.594@gmail.com>
Reported-by: Jason Anderson <jasona.594@gmail.com>
Fixes: 594ce6db32 ("platform/x86: GPD pocket fan: Use a min-speed of 2 while charging")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 176a7fca81 upstream.
Some of ASUS laptops like UX431FL keyboard backlight cannot be set to
brightness 0. According to ASUS' information, the brightness should be
0x80 ~ 0x83. This patch fixes it by following the logic.
Fixes: e9809c0b96 ("asus-wmi: add keyboard backlight support")
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Reviewed-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e8796c6c69 upstream.
The CONNECT X300 uses the PMC clock for on-board components and gets
stuck during boot if the clock is disabled. Therefore, add this
device to the critical systems list.
Tested on CONNECT X300.
Fixes: 648e921888 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Signed-off-by: Michael Haener <michael.haener@siemens.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 133b2acee3 upstream.
At least on the HP Envy x360 15-cp0xxx model the WMI interface
for HPWMI_FEATURE2_QUERY requires an outsize of at least 128 bytes,
otherwise it fails with an error code 5 (HPWMI_RET_INVALID_PARAMETERS):
Dec 06 00:59:38 kernel: hp_wmi: query 0xd returned error 0x5
We do not care about the contents of the buffer, we just want to know
if the HPWMI_FEATURE2_QUERY command is supported.
This commits bumps the buffer size, fixing the error.
Fixes: 8a1513b493 ("hp-wmi: limit hotkey enable")
Cc: stable@vger.kernel.org
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f3e4f3fc8e upstream.
The AML code implementing the WMI methods creates a variable length
field to hold the input data we pass like this:
CreateDWordField (Arg1, 0x0C, DSZI)
Local5 = DSZI /* \HWMC.DSZI */
CreateField (Arg1, 0x80, (Local5 * 0x08), DAIN)
If we pass 0 as bios_args.datasize argument then (Local5 * 0x08)
is 0 which results in these errors:
[ 71.973305] ACPI BIOS Error (bug): Attempt to CreateField of length zero (20190816/dsopcode-133)
[ 71.973332] ACPI Error: Aborting method \HWMC due to previous error (AE_AML_OPERAND_VALUE) (20190816/psparse-529)
[ 71.973413] ACPI Error: Aborting method \_SB.WMID.WMAA due to previous error (AE_AML_OPERAND_VALUE) (20190816/psparse-529)
And in our HPWMI_WIRELESS2_QUERY calls always failing. for read commands
like HPWMI_WIRELESS2_QUERY the DSZI value is not used / checked, except for
read commands where extra input is needed to specify exactly what to read.
So for HPWMI_WIRELESS2_QUERY we can safely pass the size of the expected
output as insize to hp_wmi_perform_query(), as we are already doing for all
other HPWMI_READ commands we send. Doing so fixes these errors.
Cc: stable@vger.kernel.org
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=197007
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201981
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 16245db148 upstream.
The HP WMI calls may take up to 128 bytes of data as input, and
the AML methods implementing the WMI calls, declare a couple of fields for
accessing input in different sizes, specifycally the HWMC method contains:
CreateField (Arg1, 0x80, 0x0400, D128)
Even though we do not use any of the WMI command-types which need a buffer
of this size, the APCI interpreter still tries to create it as it is
declared in generoc code at the top of the HWMC method which runs before
the code looks at which command-type is requested.
This results in many of these errors on many different HP laptop models:
[ 14.459261] ACPI Error: Field [D128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20170303/dsopcode-236)
[ 14.459268] ACPI Error: Method parse/execution failed [\HWMC] (Node ffff8edcc61507f8), AE_AML_BUFFER_LIMIT (20170303/psparse-543)
[ 14.459279] ACPI Error: Method parse/execution failed [\_SB.WMID.WMAA] (Node ffff8edcc61523c0), AE_AML_BUFFER_LIMIT (20170303/psparse-543)
This commit increases the size of the data element of the bios_args struct
to 128 bytes fixing these errors.
Cc: stable@vger.kernel.org
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=197007
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201981
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1520703
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 440f343df1 ]
Exchange LED configuration between msn201x and next generation systems
types.
Bug was introduced when LED driver activation was added to mlx-platform.
LED configuration for the three new system MQMB7, MSN37, MSN34 was
assigned to MSN21 and vice versa. This bug affects MSN21 only and
likely requires backport to v4.19.
Fixes: 1189456b1c ("platform/x86: mlx-platform: Add LED platform driver activation")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 589edb56b4 ]
Bay and Cherry Trail devices with a Dollar Cove or Whiskey Cove PMIC
have an ACPI node with a HID of INT33FE which is a "virtual" battery
device implementing a standard ACPI battery interface which depends upon
a proprietary, undocument OpRegion called BMOP. Since we do have docs
for the actual fuel-gauges used on these boards we instead use native
fuel-gauge drivers talking directly to the fuel-gauge ICs on boards which
rely on this INT33FE device for their battery monitoring.
On boards with a Dollar Cove PMIC the INT33FE device's resources (_CRS)
describe a non-existing I2C client at address 0x6b with a bus-speed of
100KHz. This is a problem on some boards since there are actual devices
on that same bus which need a speed of 400KHz to function properly.
This commit adds the INT33FE HID to the list of devices with I2C resources
which should be enumerated as a platform-device rather then letting the
i2c-core instantiate an i2c-client matching the first I2C resource,
so that its bus-speed will not influence the max speed of the I2C bus.
This fixes e.g. the touchscreen not working on the Teclast X98 II Plus.
The INT33FE device on boards with a Whiskey Cove PMIC is somewhat special.
Its first I2C resource is for a secondary I2C address of the PMIC itself,
which is already described in an ACPI device with an INT34D3 HID.
But it has 3 more I2C resources describing 3 other chips for which we do
need to instantiate I2C clients and which need device-connections added
between them for things to work properly. This special case is handled by
the drivers/platform/x86/intel_cht_int33fe.c code.
Before this commit that code was binding to the i2c-client instantiated
for the secondary I2C address of the PMIC, since we now instantiate a
platform device for the INT33FE device instead, this commit also changes
the intel_cht_int33fe driver from an i2c driver to a platform driver.
This also brings the intel_cht_int33fe drv inline with how we instantiate
multiple i2c clients from a single ACPI device in other cases, as done
by the drivers/platform/x86/i2c-multi-instantiate.c code.
Reported-and-tested-by: Alexander Meiler <alex.meiler@protonmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8289c4b6f2 ]
Clang warns that mlxplat_mlxcpld_msn201x_items is not going to be
emitted in the final assembly because it's only used in ARRAY_SIZE right
now, which is a compile time evaluation since the array's size is known.
drivers/platform/x86/mlx-platform.c:555:32: warning: variable
'mlxplat_mlxcpld_msn201x_items' is not needed and will not be emitted
[-Wunneeded-internal-declaration]
static struct mlxreg_core_item mlxplat_mlxcpld_msn201x_items[] = {
^
1 warning generated.
It appears this was a copy and paste mistake from when this item was
first added. Use the definition in mlxplat_mlxcpld_msn201x_data so that
Clang no longer warns.
Link: https://github.com/ClangBuiltLinux/linux/issues/141
Fixes: a49a41482f ("platform/x86: mlx-platform: Add support for new msn201x system type")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ad0d315b4d upstream.
The SIMATIC IPC227E uses the PMC clock for on-board components and gets
stuck during boot if the clock is disabled. Therefore, add this device
to the critical systems list.
Fixes: 648e921888 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6a31061833 ]
We lose even config space access when we power gate the ISP
via the PUNIT. That makes lspci & co. produce gibberish.
To fix that let's try to implement actual runtime pm hooks
and inform the pci core that the device always goes to
D3cold. That will cause the pci core to resume the device
before attempting config space access.
This introduces another annoyance though. We get the
following error every time we try to resume the device:
intel_atomisp2_pm 0000:00:03.0: Refused to change power state, currently in D3
The reason being that the pci core tries to put the device
back into D0 via the standard PCI PM mechanism before
calling the driver resume hook. To fix this properly
we'd need to infiltrate the platform pm hooks (could
turn ugly real fast), or use pm domains (which don't
seem to exist on x86), or some extra early resume
hook for the driver (which doesn't exist either).
So maybe we just choose to live with the error?
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Darren Hart <dvhart@infradead.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d505758b1 ]
On a Xen-based PVH virtual machine with more than 4 GiB of RAM,
intel_pmc_core fails initialization with the following warning message
from the kernel, indicating that the driver is attempting to ioremap
RAM:
ioremap on RAM at 0x00000000fe000000 - 0x00000000fe001fff
WARNING: CPU: 1 PID: 434 at arch/x86/mm/ioremap.c:186 __ioremap_caller.constprop.0+0x2aa/0x2c0
...
Call Trace:
? pmc_core_probe+0x87/0x2d0 [intel_pmc_core]
pmc_core_probe+0x87/0x2d0 [intel_pmc_core]
This issue appears to manifest itself because of the following fallback
mechanism in the driver:
if (lpit_read_residency_count_address(&slp_s0_addr))
pmcdev->base_addr = PMC_BASE_ADDR_DEFAULT;
The validity of address PMC_BASE_ADDR_DEFAULT (i.e., 0xFE000000) is not
verified by the driver, which is what this patch introduces. With this
patch, if address PMC_BASE_ADDR_DEFAULT is in RAM, then the driver will
not attempt to ioremap the aforementioned address.
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9452fbf5c6 upstream.
The CB4063 board uses pmc_plt_clk* clocks for ethernet controllers. This
adds it to the critclk_systems DMI table so the clocks are marked as
CLK_CRITICAL and not turned off.
Fixes: 648e921888 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cb1921b17a ]
When a switch event, such as tablet mode/laptop mode or docked/undocked,
wakes a device make sure that the value of the swich is reported.
Without when a device is put in tablet mode from laptop mode when it is
suspended or vice versa the device will wake up but mode will be
incorrect.
Tested by suspending a device in laptop mode and putting it in tablet
mode, the device resumes and is in tablet mode. When suspending the
device in tablet mode and putting it in laptop mode the device resumes
and is in laptop mode.
Signed-off-by: Mathew King <mathewk@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 401fee8195 ]
Commit 78f3ac76d9 ("platform/x86: asus-wmi: Tell the EC the OS will
handle the display off hotkey") causes the backlight to be permanently off
on various EeePC laptop models using the eeepc-wmi driver (Asus EeePC
1015BX, Asus EeePC 1025C).
The asus_wmi_set_devstate(ASUS_WMI_DEVID_BACKLIGHT, 2, NULL) call added
by that commit is made conditional in this commit and only enabled in
the quirk_entry structs in the asus-nb-wmi driver fixing the broken
display / backlight on various EeePC laptop models.
Cc: João Paulo Rechi Vita <jprvita@endlessm.com>
Fixes: 78f3ac76d9 ("platform/x86: asus-wmi: Tell the EC the OS will handle the display off hotkey")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d6423bd030 ]
There are several Beckhoff Automation industrial PC boards which use
pmc_plt_clk* clocks for ethernet controllers. This adds affected boards
to critclk_systems DMI table so the clocks are marked as CLK_CRITICAL and
not turned off.
Fixes: 648e921888 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d0818f5eb ]
The Lex 3I380D industrial PC has 4 ethernet controllers on board
which need pmc_plt_clk0 - 3 to function, add it to the critclk_systems
DMI table, so that drivers/clk/x86/clk-pmc-atom.c will mark the clocks
as CLK_CRITICAL and they will not get turned off.
Fixes: 648e921888 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Reported-and-tested-by: Semyon Verchenko <semverchenko@factor-ts.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94d4e7af14 ]
As new transfer mechanisms are added to the EC codebase, they may
not support v2 of the EC protocol.
If the v3 initial handshake transfer fails, the kernel will try
and call cmd_xfer as a fallback. If v2 is not supported, cmd_xfer
will be NULL, and the code will end up causing a kernel panic.
Add a check for NULL before calling the transfer function, along
with a helpful comment explaining how one might end up in this
situation.
Signed-off-by: Enrico Granata <egranata@chromium.org>
Reviewed-by: Jett Rink <jettrink@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f7db839fcc upstream.
Some AMD based ThinkPads have a firmware bug that calling
"GBDC" will cause Bluetooth on Intel wireless cards blocked.
Probe these models by DMI match and disable Bluetooth subdriver
if specified Intel wireless card exist.
Cc: stable <stable@vger.kernel.org> # 4.14+
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c2e071300 upstream.
Since commit 648e921888 ("clk: x86: Stop marking clocks as
CLK_IS_CRITICAL"), the pmc_plt_clocks of the Bay Trail SoC are
unconditionally gated off. Unfortunately this will break systems where these
clocks are used for external purposes beyond the kernel's knowledge. Fix it
by implementing a system specific quirk to mark the necessary pmc_plt_clks as
critical.
Fixes: 648e921888 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Signed-off-by: David Müller <dave.mueller@gmx.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 49ad712afa ]
The Image Signal Processor found on Cherry Trail devices is brought up in
D0 state on devices which have camera sensors attached to it. The ISP will
not enter D3 state again without some massaging of its registers beforehand
and the ISP not being in D3 state blocks the SoC from entering S0ix modes.
There was a driver for the ISP in drivers/staging but that got removed
again because it never worked. It does not seem likely that a real
driver for the ISP will be added to the mainline kernel anytime soon.
This commit adds a dummy driver which contains the necessary magic from
the staging driver to powerdown the ISP, so that Cherry Trail devices where
the ISP is used will properly use S0ix modes when suspended.
Together with other recent S0ix related fixes this allows S0ix modes to
be entered on e.g. a Chuwi Hi8 Pro and a HP x2 210.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=196915
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e97a34563d ]
Power button suspend for some Dell models was added in:
commit 821b853662 ("platform/x86: intel-hid: Power button suspend on Dell Latitude 7275")
by checking against the power button press notification (0xCE) to report
the power button press event. The corresponding power button release
notification (0xCF) was caught and ignored to stop it from being reported
as an "unknown event" in the logs.
The missing button release event is creating issues on Android-x86, as
reported on the project mailing list for a Dell Latitude 5175 model, since
the events are expected in down/up pairs.
Report the power button release event to fix this issue.
Link: https://groups.google.com/forum/#!topic/android-x86/aSwZK9Nf9Ro
Tested-by: Tristian Celestin <tristian.celestin@outlook.com>
Tested-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Signed-off-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
[dvhart: corrected commit reference format per checkpatch]
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e68eeea98 ]
A previous commit "platform/x86: intel_pmc_core: Make the driver PCH
family agnostic <c977b98bbef5898ed3d30b08ea67622e9e82082a>" provided
better abstraction to this driver but has some fundamental issues.
e.g. the following condition
for (index = 0; index < pmcdev->map->ppfear_buckets &&
index < PPFEAR_MAX_NUM_ENTRIES; index++, iter++)
is wrong because for CNL, PPFEAR_MAX_NUM_ENTRIES is hardcoded as 5 which
is _wrong_ and even though ppfear_buckets is 8, the loop fails to read
all eight registers needed for CNL PCH i.e. PPFEAR0 and PPFEAR1. This
patch refactors the pfear show logic to correctly read PCH IP power
gating status for Cannonlake and beyond.
Cc: "David E. Box" <david.e.box@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: c977b98bbe ("platform/x86: intel_pmc_core: Make the driver PCH family agnostic")
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d9b2864a4 ]
Commit ae7c8cba32 ("platform/x86: ideapad-laptop: add lenovo RESCUER
R720-15IKBN to no_hw_rfkill_list") added
DMI_MATCH(DMI_BOARD_NAME, "80WW")
for Lenovo RESCUER R720-15IKBN.
But DMI_BOARD_NAME does not match 80WW on Lenovo RESCUER R720-15IKBN,
thus cause Wireless LAN still be hard blocked.
On Lenovo RESCUER R720-15IKBN:
~$ cat /sys/class/dmi/id/sys_vendor
LENOVO
~$ cat /sys/class/dmi/id/board_name
Provence-5R3
~$ cat /sys/class/dmi/id/product_name
80WW
~$ cat /sys/class/dmi/id/product_version
Lenovo R720-15IKBN
So on Lenovo RESCUER R720-15IKBN:
DMI_SYS_VENDOR should match "LENOVO",
DMI_BOARD_NAME should match "Provence-5R3",
DMI_PRODUCT_NAME should match "80WW",
DMI_PRODUCT_VERSION should match "Lenovo R720-15IKBN".
Fix it, and in according with other entries in no_hw_rfkill_list,
use DMI_PRODUCT_VERSION instead of DMI_BOARD_NAME.
Fixes: ae7c8cba32 ("platform/x86: ideapad-laptop: add lenovo RESCUER R720-15IKBN to no_hw_rfkill_list")
Signed-off-by: Yang Fan <nullptr.cpp@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 495965a100 upstream.
Assigning the mux to the USB Type-C port on top of fusb302.
That will prepare this driver for the change in the USB
Type-C class code, where the class driver will assume the
muxes to be always assigned to the ports and not the
controllers.
Once the USB Type-C class driver has been updated, the
connections between the mux and fusb302 can be dropped.
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 78d2b54b13 upstream.
Adding a connection for the DisplayPort alternate mode.
PI3USB30532 is used for muxing the port to DisplayPort on
CHT platforms. The connection allows the alternate mode
device to get handle to the mux, and therefore make it
possible to use the USB Type-C connector as DisplayPort.
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0ee4b5f801 ]
Add BACKLIGHT_LCD_SUPPORT for SAMSUNG_Q10 to fix the
warning: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE.
SAMSUNG_Q10 selects BACKLIGHT_CLASS_DEVICE but BACKLIGHT_CLASS_DEVICE
depends on BACKLIGHT_LCD_SUPPORT.
Copy BACKLIGHT_LCD_SUPPORT dependency into SAMSUNG_Q10 to fix:
WARNING: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE
Depends on [n]: HAS_IOMEM [=y] && BACKLIGHT_LCD_SUPPORT [=n]
Selected by [y]:
- SAMSUNG_Q10 [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] && ACPI [=y]
Signed-off-by: Sinan Kaya <okaya@kernel.org>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d58bf90a32 ]
Add BACKLIGHT_LCD_SUPPORT for ACPI_CMPC to fix the
warning: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE.
ACPI_CMPC selects BACKLIGHT_CLASS_DEVICE but BACKLIGHT_CLASS_DEVICE
depends on BACKLIGHT_LCD_SUPPORT.
Copy BACKLIGHT_LCD_SUPPORT dependency into ACPI_CMPC to fix
WARNING: unmet direct dependencies detected for BACKLIGHT_CLASS_DEVICE
Depends on [n]: HAS_IOMEM [=y] && BACKLIGHT_LCD_SUPPORT [=n]
Selected by [y]:
- ACPI_CMPC [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y] && ACPI [=y] && INPUT [=y] && (RFKILL [=n] || RFKILL [=n]=n)
Signed-off-by: Sinan Kaya <okaya@kernel.org>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit edd45cba5e ]
Shift by one the registers for tachometers (7 - 12).
This fix is relevant for the same new systems MQMB7, MSN37, MSN34,
which are about to be released to the customers.
At the moment, none of them is at customers sites. The customers will
not suffer from this change.
This fix is necessary, because register used before for tachometer 7
has been than reserved for the second PWM for newer systems, which are
not supported yet in mlx-platform driver. So registers of tachometers
7-12 have been shifted by one.
Fixes: 0378123c58 ("platform/x86: mlx-platform: Add mlxreg-fan platform driver activation")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ad16b78a0 ]
EC_MKBP_EVENT_SENSOR_FIFO events can be triggered for a variety of
reasons, and there are very few cases in which they should be treated as
wakeup interrupts (particularly, when a certain
MOTIONSENSE_MODULE_FLAG_* is set, but this is not even supported in the
mainline cros_ec_sensor driver yet). Most of the time, they are benign
sensor readings. In any case, the top-level cros_ec device doesn't know
enough to determine that they should wake the system, and so it should
not report the event. This would be the job of the cros_ec_sensors
driver to parse.
This patch adds checks to cros_ec_get_next_event() such that it doesn't
signal 'wakeup' for events of type EC_MKBP_EVENT_SENSOR_FIFO.
This patch is particularly relevant on devices like Scarlet (Rockchip
RK3399 tablet, known as Acer Chromebook Tab 10), where the EC firmware
reports sensor events much more frequently. This was causing
/sys/power/wakeup_count to increase very frequently, often needlessly
interrupting our ability to suspend the system.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71b12beaf1 ]
According to Asus firmware engineers, the meaning of these codes is only
to notify the OS that the screen brightness has been turned on/off by
the EC. This does not match the meaning of KEY_DISPLAYTOGGLE /
KEY_DISPLAY_OFF, where userspace is expected to change the display
brightness.
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3f2f3799a ]
When the OS registers to handle events from the display off hotkey the
EC will send a notification with 0x35 for every key press, independent
of the backlight state.
The behavior of this key on Windows, with the ATKACPI driver from Asus
installed, is turning off the backlight of all connected displays with a
fading effect, and any cursor input or key press turning the backlight
back on. The key press or cursor input that wakes up the display is also
passed through to the application under the cursor or under focus.
The key that matches this behavior the closest is KEY_SCREENLOCK.
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78f3ac76d9 ]
In the past, Asus firmwares would change the panel backlight directly
through the EC when the display off hotkey (Fn+F7) was pressed, and
only notify the OS of such change, with 0x33 when the LCD was ON and
0x34 when the LCD was OFF. These are currently mapped to
KEY_DISPLAYTOGGLE and KEY_DISPLAY_OFF, respectively.
Most recently the EC on Asus most machines lost ability to toggle the
LCD backlight directly, but unless the OS informs the firmware it is
going to handle the display toggle hotkey events, the firmware still
tries change the brightness through the EC, to no effect. The end result
is a long list (at Endless we counted 11) of Asus laptop models where
the display toggle hotkey does not perform any action. Our firmware
engineers contacts at Asus were surprised that there were still machines
out there with the old behavior.
Calling WMNB(ASUS_WMI_DEVID_BACKLIGHT==0x00050011, 2) on the _WDG device
tells the firmware that it should let the OS handle the display toggle
event, in which case it will simply notify the OS of a key press with
0x35, as shown by the DSDT excerpts bellow.
Scope (_SB)
{
(...)
Device (ATKD)
{
(...)
Name (_WDG, Buffer (0x28)
{
/* 0000 */ 0xD0, 0x5E, 0x84, 0x97, 0x6D, 0x4E, 0xDE, 0x11,
/* 0008 */ 0x8A, 0x39, 0x08, 0x00, 0x20, 0x0C, 0x9A, 0x66,
/* 0010 */ 0x4E, 0x42, 0x01, 0x02, 0x35, 0xBB, 0x3C, 0x0B,
/* 0018 */ 0xC2, 0xE3, 0xED, 0x45, 0x91, 0xC2, 0x4C, 0x5A,
/* 0020 */ 0x6D, 0x19, 0x5D, 0x1C, 0xFF, 0x00, 0x01, 0x08
})
Method (WMNB, 3, Serialized)
{
CreateDWordField (Arg2, Zero, IIA0)
CreateDWordField (Arg2, 0x04, IIA1)
Local0 = (Arg1 & 0xFFFFFFFF)
(...)
If ((Local0 == 0x53564544))
{
(...)
If ((IIA0 == 0x00050011))
{
If ((IIA1 == 0x02))
{
^^PCI0.SBRG.EC0.SPIN (0x72, One)
^^PCI0.SBRG.EC0.BLCT = One
}
Return (One)
}
}
(...)
}
(...)
}
(...)
}
(...)
Scope (_SB.PCI0.SBRG.EC0)
{
(...)
Name (BLCT, Zero)
(...)
Method (_Q10, 0, NotSerialized) // _Qxx: EC Query
{
If ((BLCT == Zero))
{
Local0 = One
Local0 = RPIN (0x72)
Local0 ^= One
SPIN (0x72, Local0)
If (ATKP)
{
Local0 = (0x34 - Local0)
^^^^ATKD.IANE (Local0)
}
}
ElseIf ((BLCT == One))
{
If (ATKP)
{
^^^^ATKD.IANE (0x35)
}
}
}
(...)
}
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 684238d79a ]
To fix:
acerhdf: unknown (unsupported) BIOS version Gateway /LT31 /v1.3307 , please report, aborting!
As can be seen in the context, the BIOS registers haven't changed in
the previous versions, so the assumption is they won't have changed
in this last update for this somewhat older platform either.
Cc: Peter Feuerer <peter@piie.net>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Peter Feuerer <peter@piie.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d98b1ef36 ]
On some Goldmont based systems such as ASRock J3455M the BIOS may not
enable the IPC1 device that provides access to the PMC and PUNIT. In
such scenarios, the IOSS and PSS resources from the platform device can
not be obtained and result in a invalid telemetry_plt_config which is an
internal data structure that holds platform config and is maintained by
the telemetry platform driver.
This is also applicable to the platforms where the BIOS supports IPC1
device under debug configurations but IPC1 is disabled by user or the
policy.
This change allows user to know the reason for not seeing entries under
/sys/kernel/debug/telemetry/* when there is no apparent failure at boot.
Cc: Matt Turner <matt.turner@intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>
Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@intel.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=198779
Acked-by: Matt Turner <matt.turner@intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Commit 57e94c8b97 caused cros-ec keyboard events
be truncated on many chromebooks so that Left and Right keys on Column 12 were
always 0. Use ret as memcpy len to fix this.
The old code was using ec_dev->event_size, which is the event payload/data size
excluding event_type header, for the length of the memcpy operation. Use ret
as memcpy length to avoid the off by one and copy the whole msg->data.
Fixes: 57e94c8b97 ("mfd: cros-ec: Increase maximum mkbp event size")
Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Emil Karlson <jekarlson@gmail.com>
Signed-off-by: Benson Leung <bleung@chromium.org>
