As per draft-hilland-iwarp-verbs-v1.0, sec 6.2.3, always initiate a CLOSE
when entering into TERM state.
In c4iw_modify_qp(), disconnect operation should only be performed when
the modify_qp call is invoked from ib_core. And all other internal
modify_qp calls(invoked within iw_cxgb4) that needs 'disconnect' should
call c4iw_ep_disconnect() explicitly after modify_qp. Otherwise, deadlocks
like below can occur:
Call Trace:
schedule+0x2f/0xa0
schedule_preempt_disabled+0xa/0x10
__mutex_lock.isra.5+0x2d0/0x4a0
c4iw_ep_disconnect+0x39/0x430 => tries to reacquire ep lock again
c4iw_modify_qp+0x468/0x10d0
rx_data+0x218/0x570 => acquires ep lock
process_work+0x5f/0x70
process_one_work+0x1a7/0x3b0
worker_thread+0x30/0x390
kthread+0x112/0x130
ret_from_fork+0x35/0x40
Fixes: d2c33370ae ("RDMA/iw_cxgb4: Always disconnect when QP is transitioning to TERMINATE state")
Link: https://lore.kernel.org/r/20200204091230.7210-1-krishna2@chelsio.com
Signed-off-by: Krishnamraju Eraparaju <krishna2@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
When binding a QP with a counter and the QP state is not RESET, return
failure if the rts2rts_qp_counters_set_id is not supported by the
device.
This is to prevent cases like manual bind for Connect-IB devices from
returning success when the feature is not supported.
Fixes: d14133dd41 ("IB/mlx5: Support set qp counter")
Link: https://lore.kernel.org/r/20200126171708.5167-1-leon@kernel.org
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
[WHY & HOW]
Previously drain clk was unconstrained and fill clk was constrained on fclk.
We want to change it to fill clk unconstrained and drain clock constrained
to dcfclk.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
The optimized_require flag is needed to set watermarks and clocks lower
in certain conditions. This flag is set to true and then set to false
while programming front end in dcn20.
[HOW]
Do not set the flag to false while disabling plane.
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Driver crash with psr feature enabled due to divide-by-zero error.
This is a regression after rework to calculate static screen frame
number entry time.
[How]
Correct order of operations to avoid divide-by-zero.
Signed-off-by: Roman Li <roman.li@amd.com>
Reviewed-by: Zhan Liu <Zhan.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove "snps,phy-bus-name", "snps,phy-bus-id" and "snps,phy-addr"
properties which are deprecated.
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
We've got a regression report about M-Audio Fast Track C400 device,
and the git bisection resulted in the commit e0ccdef926 ("ALSA:
usb-audio: Clean up check_input_term()"). This commit was about the
rewrite of the input terminal parser, and it's not too obvious from
the change what really broke. The answer is: it's the interpretation
of UAC2/3 effect units.
In the original code, UAC2 effect unit is as if through UAC1
processing unit because both UAC1 PU and UAC2/3 EU share the same
number (0x07). The old code went through a complex switch-case
fallthrough, finally bailing out in the middle:
if (protocol == UAC_VERSION_2 &&
hdr[2] == UAC2_EFFECT_UNIT) {
/* UAC2/UAC1 unit IDs overlap here in an
* uncompatible way. Ignore this unit for now.
*/
return 0;
}
... and this special handling was missing in the new code; the new
code treats UAC2/3 effect unit as if it were equivalent with the
processing unit.
Actually, the old code was too confusing. The effect unit has an
incompatible unit description with the processing unit, so we
shouldn't have dealt with EU in the same way.
This patch addresses the regression by changing the effect unit
handling to the own parser function. The own parser function makes
the clear distinct with PU, so it improves the readability, too.
The EU parser just sets the type and the id like the old kernels.
Once when the proper effect unit support is added, we can revisit this
parser function, but for now, let's keep this simple setup as is.
Fixes: e0ccdef926 ("ALSA: usb-audio: Clean up check_input_term()")
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206147
Link: https://lore.kernel.org/r/20200211160521.31990-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For the old mount API, the module parameters parseing function will
be called in ceph_mount() and also just after the default posix acl
flag set, so we can control to enable/disable it via the mount option.
But for the new mount API, it will call the module parameters
parseing function before ceph_get_tree(), so the posix acl will always
be enabled.
Fixes: 82995cc6c5 ("libceph, rbd, ceph: convert to use the new mount API")
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
syzbot reported that 4fbc0c711b ("ceph: remove the extra slashes in
the server path") had caused a regression where an allocation could be
done under a spinlock -- compare_mount_options() is called by sget_fc()
with sb_lock held.
We don't really need the supplied server path, so canonicalize it
in place and compare it directly. To make this work, the leading
slash is kept around and the logic in ceph_real_mount() to skip it
is restored. CEPH_MSG_CLIENT_SESSION now reports the same (i.e.
canonicalized) path, with the leading slash of course.
Fixes: 4fbc0c711b ("ceph: remove the extra slashes in the server path")
Reported-by: syzbot+98704a51af8e3d9425a9@syzkaller.appspotmail.com
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
In O_APPEND & O_DIRECT mode, the data from different writers will
be possibly overlapping each other since they take the shared lock.
For example, both Writer1 and Writer2 are in O_APPEND and O_DIRECT
mode:
Writer1 Writer2
shared_lock() shared_lock()
getattr(CAP_SIZE) getattr(CAP_SIZE)
iocb->ki_pos = EOF iocb->ki_pos = EOF
write(data1)
write(data2)
shared_unlock() shared_unlock()
The data2 will overlap the data1 from the same file offset, the
old EOF.
Switch to exclusive lock instead when O_APPEND is specified.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Each user context is allocated a certain number of RcvArray (TID)
entries and these entries are managed through TID groups. These groups
are put into one of three lists in each user context: tid_group_list,
tid_used_list, and tid_full_list, depending on the number of used TID
entries within each group. When TID packets are expected, one or more
TID groups will be allocated. After the packets are received, the TID
groups will be freed. Since multiple user threads may access the TID
groups simultaneously, a mutex exp_mutex is used to synchronize the
access. However, when the user file is closed, it tries to release
all TID groups without acquiring the mutex first, which risks a race
condition with another thread that may be releasing its TID groups,
leading to data corruption.
This patch addresses the issue by acquiring the mutex first before
releasing the TID groups when the file is closed.
Fixes: 3abb33ac65 ("staging/hfi1: Add TID cache receive init and free funcs")
Link: https://lore.kernel.org/r/20200210131026.87408.86853.stgit@awfm-01.aw.intel.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Commit e812744c5f ("drm: msm: a6xx: Add support for A618") missed
updating the VBIF flush in a6xx_gmu_shutdown and instead
inserted the new sequence into a6xx_pm_suspend along with a redundant
GMU idle.
Move a6xx_bus_clear_pending_transactions to a6xx_gmu.c and use it in
the appropriate place in the shutdown routine and remove the redundant
idle call.
v2: Remove newly unused variable that was triggering a warning
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Fixes: e812744c5f ("drm: msm: a6xx: Add support for A618")
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Commit e812744c5f ("drm: msm: a6xx: Add support for A618") added a
universal GBIF un-halt into a6xx_start(). This can cause problems for
a630 targets which do not use GBIF and might have access protection
enabled on the region now occupied by the GBIF registers.
But it turns out that we didn't need to unhalt the GBIF in this path
since the stop function already takes care of that after executing a flush
but before turning off the headswitch. We should be confident that the
GBIF is open for business when we restart the hardware.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Fixes: e812744c5f ("drm: msm: a6xx: Add support for A618")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Highest bank bit configuration is different for a618 gpu. Update
it with the correct configuration which is the reset value incidentally.
Signed-off-by: Akhil P Oommen <akhilpo@codeaurora.org>
Signed-off-by: Sharat Masetty <smasetty@codeaurora.org>
Fixes: e812744c5f ("drm: msm: a6xx: Add support for A618")
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add rate limiting of the 'pp done time out' warnings since these
warnings can quickly fill the dmesg buffer.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The commit 4b638f13ba ("xsk: Eliminate the RX batch size")
introduced a much more lazy way of updating the global consumer
pointers from the kernel side, by only doing so when running out of
entries in the fill or Tx rings (the rings consumed by the
kernel). This can result in a deadlock with the user application if
the kernel requires more than one entry to proceed and the application
cannot put these entries in the fill ring because the kernel has not
updated the global consumer pointer since the ring is not empty.
Fix this by publishing the local kernel side consumer pointer whenever
we have completed Rx or Tx processing in the kernel. This way, user
space will have an up-to-date view of the consumer pointers whenever it
gets to execute in the one core case (application and driver on the
same core), or after a certain number of packets have been processed
in the two core case (application and driver on different cores).
A side effect of this patch is that the one core case gets better
performance, but the two core case gets worse. The reason that the one
core case improves is that updating the global consumer pointer is
relatively cheap since the application by definition is not running
when the kernel is (they are on the same core) and it is beneficial
for the application, once it gets to run, to have pointers that are
as up to date as possible since it then can operate on more packets
and buffers. In the two core case, the most important performance
aspect is to minimize the number of accesses to the global pointers
since they are shared between two cores and bounces between the caches
of those cores. This patch results in more updates to global state,
which means lower performance in the two core case.
Fixes: 4b638f13ba ("xsk: Eliminate the RX batch size")
Reported-by: Ryan Goodfellow <rgoodfel@isi.edu>
Reported-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Link: https://lore.kernel.org/bpf/1581348432-6747-1-git-send-email-magnus.karlsson@intel.com
Perf doesn't take the left period into account when auto-reload is
enabled with fixed period sampling mode in context switch.
Here is the MSR trace of the perf command as below.
(The MSR trace is simplified from a ftrace log.)
#perf record -e cycles:p -c 2000000 -- ./triad_loop
//The MSR trace of task schedule out
//perf disable all counters, disable PEBS, disable GP counter 0,
//read GP counter 0, and re-enable all counters.
//The counter 0 stops at 0xfffffff82840
write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0
write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 0
write_msr: MSR_P6_EVNTSEL0(186), value 40003003c
rdpmc: 0, value fffffff82840
write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff
//The MSR trace of the same task schedule in again
//perf disable all counters, enable and set GP counter 0,
//enable PEBS, and re-enable all counters.
//0xffffffe17b80 (-2000000) is written to GP counter 0.
write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0
write_msr: MSR_IA32_PMC0(4c1), value ffffffe17b80
write_msr: MSR_P6_EVNTSEL0(186), value 40043003c
write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 1
write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff
When the same task schedule in again, the counter should starts from
previous left. However, it starts from the fixed period -2000000 again.
A special variant of intel_pmu_save_and_restart() is used for
auto-reload, which doesn't update the hwc->period_left.
When the monitored task schedules in again, perf doesn't know the left
period. The fixed period is used, which is inaccurate.
With auto-reload, the counter always has a negative counter value. So
the left period is -value. Update the period_left in
intel_pmu_save_and_restart_reload().
With the patch:
//The MSR trace of task schedule out
write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0
write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 0
write_msr: MSR_P6_EVNTSEL0(186), value 40003003c
rdpmc: 0, value ffffffe25cbc
write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff
//The MSR trace of the same task schedule in again
write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value 0
write_msr: MSR_IA32_PMC0(4c1), value ffffffe25cbc
write_msr: MSR_P6_EVNTSEL0(186), value 40043003c
write_msr: MSR_IA32_PEBS_ENABLE(3f1), value 1
write_msr: MSR_CORE_PERF_GLOBAL_CTRL(38f), value f000000ff
Fixes: d31fc13fdc ("perf/x86/intel: Fix event update for auto-reload")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20200121190125.3389-1-kan.liang@linux.intel.com
Now that patch.o is unconditionally selected for ftrace, it can also
get compiled for !MMU kernels. These (obviously) lack
{set,clear}_fixmap() support.
Also remove the superfluous __acquire/__release nonsense.
Fixes: 42e51f187f86 ("arm/ftrace: Use __patch_text()")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The __patch_text() function already applies __opcode_to_mem_*(), so
when __opcode_to_mem_*() is not the identity (BE*), it is applied
twice, wrecking the instruction.
Fixes: 42e51f187f86 ("arm/ftrace: Use __patch_text()")
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Followup patch will need a helper function with the 'clashing entries
refer to the identical tuple in both directions' resolution logic.
This patch will add another resolve_clash helper where loser_ct must
not be added to the dying list because it will be inserted into the
table.
Therefore this also moves the stat counters and dying-list insertion
of the losing ct.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
... so it can be re-used from clash resolution in followup patch.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
ctinfo is whats taken from the skb, i.e.
ct = nf_ct_get(skb, &ctinfo).
We do not pass 'ct' and instead re-fetch it from the skb.
Just do the same for both netns and ctinfo.
Also add a comment on what clash resolution is supposed to do.
While at it, one indent level can be removed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently we create a new mmap_offset for every call to
mmap_offset_ioctl. This exposes ourselves to an abusive client that may
simply create new mmap_offsets ad infinitum, which will exhaust physical
memory and the virtual address space. In addition to the exhaustion, a
very long linear list of mmap_offsets causes other clients using the
object to incur long list walks -- these long lists can also be
generated by simply having many clients generate their own mmap_offset.
However, we can simply use the drm_vma_node itself to manage the file
association (allow/revoke) dropping our need to keep an mmo per-file.
Then if we keep a small rbtree of per-type mmap_offsets, we can lookup
duplicate requests quickly.
Fixes: cc662126b4 ("drm/i915: Introduce DRM_I915_GEM_MMAP_OFFSET")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120104924.4000706-3-chris@chris-wilson.co.uk
(cherry picked from commit 7865559872)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The entire asm/archrandom.h header is generically included via
linux/archrandom.h only when CONFIG_ARCH_RANDOM is already set, so the
stub definitions of __arm64_rndr() and __early_cpu_has_rndr() are only
visible to KASLR if it explicitly includes the arch-internal header.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
During device memory memset, the driver allocates and use a CB (command
buffer). To reuse existing code, it keeps a pointer to the CB in two
variables, user_cb and patched_cb. Therefore, there is no need to "put"
both the user_cb and patched_cb, as it will cause an underflow of the
refcnt of the CB.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
During hard reset we must not write to the device.
Hence avoid halting CoreSight during user context close if it is done
during hard reset.
In addition, we must not re-enable clock gating afterwards as it was
deliberately disabled in the beginning of the hard reset flow.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The driver must halt the engines before doing hard-reset, otherwise the
device can go into undefined state. There is a place where the driver
didn't do that and this patch fixes it.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
It is theoretically possible for the ACPI EC GPE to be set after the
s2idle_ops->wake() called from s2idle_loop() has returned and before
the subsequent pm_wakeup_pending() check is carried out. If that
happens, the resulting wakeup event will cause the system to resume
even though it may be a spurious one.
To avoid that race, first make the ->wake() callback in struct
platform_s2idle_ops return a bool value indicating whether or not
to let the system resume and rearrange s2idle_loop() to use that
value instad of the direct pm_wakeup_pending() call if ->wake() is
present.
Next, rework acpi_s2idle_wake() to process EC events and check
pm_wakeup_pending() before re-arming the SCI for system wakeup
to prevent it from triggering prematurely and add comments to
that function to explain the rationale for the new code flow.
Fixes: 56b9918490 ("PM: sleep: Simplify suspend-to-idle control flow")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
