We want to set the irq parent for interrupts that we're setting up to be
cascaded from another interrupt controller, but we may or may not have
already mapped the gpiochip irqs into the kernel's virtual irq number
space at this point. If we have mapped irqs before calling here, then
we've gone through gpiochip_irq_map() and called irq_set_parent()
already. If we haven't mapped irqs, then the gpiochip is dynamically
mapping irqs and we can rely on gpiochip_irq_map() or the gpio driver's
irqdomain ops to setup the irq parent properly.
Either way, setting the parent here when cascading the gpiochip doesn't
make much sense because it should be done at irq mapping time. In the
dynamic mapping case, this code is mapping virq 0 to some parent virq in
a loop. While that's benign, let's drop this code to simplify.
Cc: Evan Green <evgreen@chromium.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The local ->probe() stub does nothing except calling
a generic Intel pin control probe function. Thus,
it's not needed and generic function may be called directly.
This patch converts the driver accordingly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
According to an updated pin list few names of the pins can be spelled better,
taking into account their primary functions.
Thus, update a pin list to cover B0 stepping.
Note, SPI numbering had been fixed even in A0 public documentation.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
David Ahern says:
====================
net: Kernel side filtering for route dumps
Implement kernel side filtering of route dumps by protocol (e.g., which
routing daemon installed the route), route type (e.g., unicast), table
id and nexthop device.
iproute2 has been doing this filtering in userspace for years; pushing
the filters to the kernel side reduces the amount of data the kernel
sends and reduces wasted cycles on both sides processing unwanted data.
These initial options provide a huge improvement for efficiently
examining routes on large scale systems.
v2
- better handling of requests for a specific table. Rather than walking
the hash of all tables, lookup the specific table and dump it
- refactor mr_rtm_dumproute moving the loop over the table into a
helper that can be invoked directly
- add hook to return NLM_F_DUMP_FILTERED in DONE message to ensure
it is returned even when the dump returns nothing
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Unlike IPv6, IPv4 does not have routes marked with RTF_PREFIX_RT. If the
flag is set in the dump request, just return.
In the process of this change, move the CLONE check to use the new
filter flags.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to IPv4, IPv6 fib no longer contains cloned routes. If a user
requests a route dump for only cloned entries, no sense walking the FIB
and returning everything.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update the dump request parsing in MPLS for the non-INET case to
enable kernel side filtering. If INET is disabled the only filters
that make sense for MPLS are protocol and nexthop device.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update parsing of route dump request to enable kernel side filtering.
Allow filtering results by protocol (e.g., which routing daemon installed
the route), route type (e.g., unicast), table id and nexthop device. These
amount to the low hanging fruit, yet a huge improvement, for dumping
routes.
ip_valid_fib_dump_req is called with RTNL held, so __dev_get_by_index can
be used to look up the device index without taking a reference. From
there filter->dev is only used during dump loops with the lock still held.
Set NLM_F_DUMP_FILTERED in the answer_flags so the user knows the results
have been filtered should no entries be returned.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement kernel side filtering of routes by egress device index and
table id. If the table id is given in the filter, lookup table and
call mr_table_dump directly for it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move per-table loops from mr_rtm_dumproute to mr_table_dump and export
mr_table_dump for dumps by specific table id.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement kernel side filtering of routes by egress device index and
protocol. MPLS uses only a single table and route type.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement kernel side filtering of routes by table id, egress device
index, protocol, and route type. If the table id is given in the filter,
lookup the table and call fib6_dump_table directly for it.
Move the existing route flags check for prefix only routes to the new
filter.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement kernel side filtering of routes by table id, egress device index,
protocol and route type. If the table id is given in the filter, lookup the
table and call fib_table_dump directly for it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add struct fib_dump_filter for options on limiting which routes are
returned in a dump request. The current list is table id, protocol,
route type, rtm_flags and nexthop device index. struct net is needed
to lookup the net_device from the index.
Declare the filter for each route dump handler and plumb the new
arguments from dump handlers to ip_valid_fib_dump_req.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With dump filtering we need a way to ensure the NLM_F_DUMP_FILTERED
flag is set on a message back to the user if the data returned is
influenced by some input attributes. Normally this can be done as
messages are added to the skb, but if the filter results in no data
being returned, the user could be confused as to why.
This patch adds answer_flags to the netlink_callback allowing dump
handlers to set the NLM_F_DUMP_FILTERED at a minimum in the
NLMSG_DONE message ensuring the flag gets back to the user.
The netlink_callback space is initialized to 0 via a memset in
__netlink_dump_start, so init of the new answer_flags is covered.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A user can provide a hint which will be attached to the packet and written
to the CQE on receive. This can be used as a way to offload operations
into the HW, for example parsing a packet which is a tunneled packet, and
if so, pass 0x1 as the hint. The software can use that hint to decapsulate
the packet and parse only the inner headers thus saving CPU cycles.
Signed-off-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Remove double error check from create user RQ error flow.
Fixes: 79b20a6c30 ("IB/mlx5: Add receive Work Queue verbs")
Signed-off-by: Gal Pressman <pressmangal@gmail.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-10-16
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Convert BPF sockmap and kTLS to both use a new sk_msg API and enable
sk_msg BPF integration for the latter, from Daniel and John.
2) Enable BPF syscall side to indicate for maps that they do not support
a map lookup operation as opposed to just missing key, from Prashant.
3) Add bpftool map create command which after map creation pins the
map into bpf fs for further processing, from Jakub.
4) Add bpftool support for attaching programs to maps allowing sock_map
and sock_hash to be used from bpftool, from John.
5) Improve syscall BPF map update/delete path for map-in-map types to
wait a RCU grace period for pending references to complete, from Daniel.
6) Couple of follow-up fixes for the BPF socket lookup to get it
enabled also when IPv6 is compiled as a module, from Joe.
7) Fix a generic-XDP bug to handle the case when the Ethernet header
was mangled and thus update skb's protocol and data, from Jesper.
8) Add a missing BTF header length check between header copies from
user space, from Wenwen.
9) Minor fixups in libbpf to use __u32 instead u32 types and include
proper perf_event.h uapi header instead of perf internal one, from Yonghong.
10) Allow to pass user-defined flags through EXTRA_CFLAGS and EXTRA_LDFLAGS
to bpftool's build, from Jiri.
11) BPF kselftest tweaks to add LWTUNNEL to config fragment and to install
with_addr.sh script from flow dissector selftest, from Anders.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Verify that the input DEVX object type matches the created object.
As the obj_id in the firmware is not globally unique the object type must
be considered upon checking for a valid object id.
Once both the type and the id match we know that the lock was taken on the
correct object by the uverbs layer.
Fixes: e662e14d80 ("IB/mlx5: Add DEVX support for modify and query commands")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Jakub Kicinski says:
====================
nfp: fix pedit set action offloads
Pieter says:
This set fixes set actions when using multiple pedit actions with
partial masks and with multiple keys per pedit action. Additionally
it fixes set ipv6 pedit action offloads when using it in combination
with other header keys.
The problem would only trigger if one combines multiple pedit actions
of the same type with partial masks, e.g.:
$ tc filter add dev netdev protocol ip parent ffff: \
flower indev netdev \
ip_proto tcp \
action pedit ex munge \
ip src set 11.11.11.11 retain 65535 munge \
ip src set 22.22.22.22 retain 4294901760 pipe \
csum ip and tcp pipe \
mirred egress redirect dev netdev
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously when populating the set ipv6 address action, we incorrectly
made use of pedit's key index to determine which 32bit word should be
set. We now calculate which word has been selected based on the offset
provided by the pedit action.
Fixes: 354b82bb32 ("nfp: add set ipv6 source and destination address")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously we only allowed a single header key per pedit action to
change the header. This used to result in the last header key in the
pedit action to overwrite previous headers. We now keep track of them
and allow multiple header keys per pedit action.
Fixes: c0b1bd9a8b ("nfp: add set ipv4 header action flower offload")
Fixes: 354b82bb32 ("nfp: add set ipv6 source and destination address")
Fixes: f8b7b0a6b1 ("nfp: add set tcp and udp header action flower offload")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously we did not correctly change headers when using multiple
pedit actions with partial masks. We now take this into account and
no longer just commit the last pedit action.
Fixes: c0b1bd9a8b ("nfp: add set ipv4 header action flower offload")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds fast register physical memory region (FRMR) support for
hip08.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Fix a missing call to rxrpc_put_peer() on the main path through the
rxrpc_error_report() function. This manifests itself as a ref leak
whenever an ICMP packet or other error comes in.
In commit f334430316, the hand-off of the ref to a work item was removed
and was not replaced with a put.
Fixes: f334430316 ("rxrpc: Fix error distribution")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit 9f2959b6b5 ("net: phy: improve handling delayed work")
the sync parameter isn't needed any longer in phy_start_aneg_priv().
This allows to merge phy_start_aneg() and phy_start_aneg_priv().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Masking/unmasking the CPU UART irq in CP0_Status (and redirecting it to
other CPUs) may cause interrupts be lost, especially in multi-package
machines (Package-0's UART irq cannot be delivered to others). So make
mask_loongson_irq() and unmask_loongson_irq() be no-ops.
The original problem (UART IRQ may deliver to any core) is also because
of masking/unmasking the CPU UART irq in CP0_Status. So it is safe to
remove all of the stuff.
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20433/
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Huacai Chen <chenhuacai@gmail.com>
memcpy() is the only user of the PREF() & PREFE() macros from asm/asm.h.
Switch to using the kernel_pref() & user_pref() macros from
asm/asm-eva.h which fit more consistently with other abstractions of EVA
vs non-EVA instructions.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20907/
Cc: linux-mips@linux-mips.org
We have macros in asm/asm.h to allow for use of the MOVN & MOVZ
instructions with compare-and-branch sequences providing compatibility
for ISA versions which don't include those instructions. However the
macros are unused, and appear to have always been unused. Delete the
dead code.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20909/
Cc: linux-mips@linux-mips.org
In case the NQ alloc/enable fails, free up the already allocated/enabled
NQ before reporting failure. Also, track the alloc/enable using proper
state checking.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Delayed work bnxt_re_worker would be still running even after
cancel_delayed_work returns. This causes crash as the driver proceeds with
device removal. To make sure that the work is finished before returning,
use cancel_delayed_work_sync.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Some FW versios return pkey values more than 0xFFFF. pkey_tbl_len of
ib_port_attr is 16bit value. So restricting max_pkeys to 0xFFFF.
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Expose out of sequence errors received from FW. This counter is a 32 bit
counter and driver has to accumulate the counter. Stores the previous
value for calculating the difference in the next query.
Also, update the HW statistics structure with new fields.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Expose the RoCE discard and drop counters from the HW statistics context
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
crsqe->resp would be NULL in case the host command timed out before
getting a response from HW. Check for NULL pointer to avoid a potential
crash while printing the error message.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In some FW versions, RoCE driver also receives an async notification which
was directed to L2 driver. RoCE driver does not handle this and print a
message to syslog. Drop these notifications silently.
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
