hjc
91f66d5c8b
rk fb: recovery need two framebuffer
...
Signed-off-by: hjc <hjc@rock-chips.com >
2015-05-15 10:28:22 +08:00
hjc
bafc97155a
rk fb: add for iommu pagefault debug
...
Signed-off-by: hjc <hjc@rock-chips.com >
2015-05-15 10:11:40 +08:00
hjc
4d13925646
rk fb: add interface for debug
...
Signed-off-by: hjc <hjc@rock-chips.com >
2015-05-15 10:11:34 +08:00
Xiao Feng
29d49c1410
ddrfreq: add vop bandwidth freq table in dts, in order to support more boards
...
Signed-off-by: Xiao Feng <xf@rock-chips.com >
2015-05-14 21:37:55 +08:00
Xiao Feng
a755bf1653
ddrfreq: fix new_freq=0 when the current load of ddr is between high_load and low_load
...
Signed-off-by: Xiao Feng <xf@rock-chips.com >
2015-05-14 21:37:46 +08:00
dalon.zhang
fabdd7f607
camsys_drv: v0.0x1f.0
2015-05-14 11:11:44 +08:00
Wenlong Zhuang
354b0297ae
video: rockchip: rk312x lcdc: Refine lcdc standby
...
add wait for lcdc hold valid when standby and add standby when
lcdc timing is changing at the moment of switch hdmi.
Signed-off-by: Wenlong Zhuang <daisen.zhuang@rockchips.com >
2015-05-13 15:21:26 +08:00
Zheng Yang
a7bce9c97d
HDMI:rk3128/rk3036:
...
1. For MID, remove interlace mode support and
set default mode to be enabled.
2. If HDMI is disabled, disable hotplug irq.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com >
2015-05-12 15:37:06 +08:00
Zheng Yang
753f5bec8e
HDMI:rk3288: fix pinctrl mode switch error.
...
For 3288, i25 pinctrl gpio mode name is "sleep",
not "gpio" any more.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com >
2015-05-11 19:21:12 +08:00
hjc
08a333eb63
rk3288 lcdc: delete unused message and update coding style
...
Signed-off-by: hjc <hjc@rock-chips.com >
2015-05-09 16:28:37 +08:00
hjc
1a1b1b856b
rk3288 lcdc: add overscan for extern screen
...
Signed-off-by: hjc <hjc@rock-chips.com >
2015-05-09 15:48:22 +08:00
hjc
4d9cf9bf23
rk3368 lcdc: add support overscan
...
Signed-off-by: hjc <hjc@rock-chips.com >
2015-05-09 15:37:41 +08:00
Zheng Yang
e0026f346f
rk_fb: 1. Make sure fb_par->state lowest value is zero.
...
2. For box, video layer z-order is always zero.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com >
2015-05-09 15:09:20 +08:00
hjc
a1cad7c41e
rk fb: add consider vop full mutile area for vsync register check
...
Signed-off-by: hjc <hjc@rock-chips.com >
2015-05-09 15:09:12 +08:00
hjc
8bd11d215d
rk fb: delay 200ms when extern display switch screen can fix mmu pagefault
2015-05-09 15:09:12 +08:00
hjc
e0623084bd
rk fb: kfree envp[1], if we not do real switch screen
...
Signed-off-by: hjc <hjc@rock-chips.com >
2015-05-09 15:09:11 +08:00
hjc
04ee6ea250
rk fb: fix iommu page fault when in video test
...
Signed-off-by: hjc <hjc@rock-chips.com >
2015-05-09 15:09:11 +08:00
hjc
c47ee929eb
rk fb: extend output mutex lock in win config
...
Signed-off-by: hjc <hjc@rock-chips.com >
2015-05-09 15:09:10 +08:00
hjc
af926b30e8
rk3368 lcdc: fix some hidden trouble maybe lead to abnormal when shutdown
...
Signed-off-by: hjc <hjc@rock-chips.com >
2015-05-09 15:09:10 +08:00
hjc
f75ea94550
rk fb: if lcdc is suspend ignore set par and display
...
Signed-off-by: hjc <hjc@rock-chips.com >
2015-05-09 15:09:09 +08:00
hjc
88ba5de0b5
rk fb: add fb disp policy for excessive stage
...
Signed-off-by: hjc <hjc@rock-chips.com >
2015-05-09 15:09:09 +08:00
hjc
e7c5005de8
rk fb: add mutex lock for switch screen to prevent
...
hdmi and cvbs call this function at the same
time.
Signed-off-by: hjc <hjc@rock-chips.com >
2015-05-09 15:09:08 +08:00
hjc
d0c8843219
rk fb: add switch enable status when send uevent
...
Signed-off-by: hjc <hjc@rock-chips.com >
2015-05-09 15:09:08 +08:00
hjc
629d39fd04
rk fb: update message info when page fault
...
Signed-off-by: hjc <hjc@rock-chips.com >
2015-05-09 15:09:07 +08:00
hjc
e6b41fe709
rk fb: send uevent when change video mode
...
Signed-off-by: hjc <hjc@rock-chips.com >
2015-05-09 15:09:07 +08:00
hjc
514c54f85c
rk fb: do something when user set invalid config
...
Signed-off-by: hjc <hjc@rock-chips.com >
2015-05-09 15:09:06 +08:00
hjc
92ad83ba00
rk fb: set retire fence fd to -1 when ignore this frame
...
Signed-off-by: hjc <hjc@rock-chips.com >
2015-05-09 15:09:06 +08:00
hjc
842e4d1fdc
rk fb: when unplug hdmi,post fb to display
...
Signed-off-by: hjc <hjc@rock-chips.com >
2015-05-09 15:09:05 +08:00
hjc
5456670f05
rk fb: ignore frame when in hdmi switch or set error config
...
Signed-off-by: hjc <hjc@rock-chips.com >
2015-05-09 15:09:05 +08:00
hjc
11d2362b0e
rk fb: hdmi 24hz frame time need 41ms
...
Signed-off-by: hjc <hjc@rock-chips.com >
2015-05-09 15:09:04 +08:00
hjc
acf4e1b1b7
rk fb: from rk3368 fb only need to reserved 1 framebuffer
...
Signed-off-by: hjc <hjc@rock-chips.com >
2015-05-09 15:07:27 +08:00
许盛飞
87b37bc9b4
pwm: enable pwm-frequrency less than 1K
...
Signed-off-by: 许盛飞 <xsf@rock-chips.com >
2015-05-07 17:15:58 +08:00
Zheng Yang
3848053c4a
HDMI: improve EDID parse.
...
1. For some sink device, there is no available video mode
in EDID. hdmi driver will crash under such case.
2. There are some video mode is not defined in EDID extend
block, so we need to check first block data.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com >
2015-05-06 17:15:24 +08:00
Zheng Yang
6f5f0b8243
HDMI: rk3368/rk3288: If HDCP is enabled in uboot, do not set again.
...
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com >
2015-05-05 18:25:21 +08:00
Zheng Yang
faeeda46b1
display-sys: fix code style
...
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com >
2015-05-05 18:08:27 +08:00
Zheng Yang
b3f163f9b1
display-sys: list supported 3d format of all resolution.
...
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com >
2015-05-05 17:56:57 +08:00
Zheng Yang
33dd452d61
HDMI: 3288/3368: hdcp check firmware pointer.
...
If firmware is NULL, HDCP is disabled.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com >
2015-05-04 16:26:33 +08:00
zhangqing
e3eff0c124
rk3288: clk: isp: set isp aclk and hclk from same source.
...
Because isp aclk and hclk from same source,
So vio aclk and hclk from same source.
Signed-off-by: zhangqing <zhangqing@rock-chips.com >
2015-05-04 10:10:31 +08:00
zhangqing
f3a6eaaee4
rk3288: pmic: ricoh619: modify ricoh619_device_shutdown to syscore_shutdown.
...
ricoh619_device_shutdown is earlier than syscore_shutdown.
So PMIC use syscore_shutdown is safer.
Signed-off-by: zhangqing <zhangqing@rock-chips.com >
2015-05-04 09:34:14 +08:00
xxh
5ab3b97642
8723BU BT driver V2.21
2015-04-22 11:39:46 +08:00
xxh
991b070e0b
update default config for esp8089 wifi.
2015-04-22 08:52:02 +08:00
xiaoyao
fcbf1111ba
mmc: rk_sdmmc: delete rk3126b burst_limit
...
tested-by: xiaoyao <xiaoyao@rock-chips.com >
Reviewed-by: lintao <lintao@rock-chips.com >
Signed-off-by: xiaoyao <xiaoyao@rock-chips.com >
2015-04-21 17:19:17 +08:00
hwg
21586b9c7a
wifi: support random mac address and save to file, solve compile warning
2015-04-20 16:17:57 +08:00
hwg
030a0a5a30
wifi: support random mac address and save to file
2015-04-20 16:09:08 +08:00
hwg
7509b38221
wifi driver: rtl8723bs, rtl8723bs-vq0, rtl8723bu, rtl8812au, modify custom mac addr error problem
2015-04-20 16:07:18 +08:00
hwg
5f9d0b7f7b
bcmdhd wifi driver: support custom mac address
2015-04-15 09:35:46 +08:00
hwg
d1a4db2bec
bcmdhd wifi driver: use kthread to run dhd_module_init, save time in initcall
2015-04-13 08:37:50 +08:00
Zheng Yang
e9e801f3d2
HDMI: calling rk_fb_switch_screen() to close vop related to HDMI
...
before calling switch_set_state() when HDMI is removed.
For android hwcompser need to make sure vop is disabled when
received hdmi removing event.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com >
2015-04-11 17:14:07 +08:00
lyz
9ca3a6b153
rk3036: usb: add support of wakeup by GRF linestate change
2015-04-10 11:44:49 +08:00
Zheng Yang
796d448f7a
HDMI: call function hdmi->ops->disable() if it is disabled.
...
For system can not be wakeup under following case:
step1. Disable HDMI.
step2. set system to deep sleep mode.
step3. remove HDMI connection.
step4. wake up system.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com >
2015-04-09 18:01:51 +08:00