This patch adds documentation of device tree bindings for the
STM32 SAI ASoC driver.
Signed-off-by: olivier moysan <olivier.moysan@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently when there are buffered writes that were not yet flushed and
they fall within allocated ranges of the file (that is, not in holes or
beyond eof assuming there are no prealloc extents beyond eof), btrfs
simply reports an incorrect number of used blocks through the stat(2)
system call (or any of its variants), regardless of mount options or
inode flags (compress, compress-force, nodatacow). This is because the
number of blocks used that is reported is based on the current number
of bytes in the vfs inode plus the number of dealloc bytes in the btrfs
inode. The later covers bytes that both fall within allocated regions
of the file and holes.
Example scenarios where the number of reported blocks is wrong while the
buffered writes are not flushed:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt/sdc
$ xfs_io -f -c "pwrite -S 0xaa 0 64K" /mnt/sdc/foo1
wrote 65536/65536 bytes at offset 0
64 KiB, 16 ops; 0.0000 sec (259.336 MiB/sec and 66390.0415 ops/sec)
$ sync
$ xfs_io -c "pwrite -S 0xbb 0 64K" /mnt/sdc/foo1
wrote 65536/65536 bytes at offset 0
64 KiB, 16 ops; 0.0000 sec (192.308 MiB/sec and 49230.7692 ops/sec)
# The following should have reported 64K...
$ du -h /mnt/sdc/foo1
128K /mnt/sdc/foo1
$ sync
# After flushing the buffered write, it now reports the correct value.
$ du -h /mnt/sdc/foo1
64K /mnt/sdc/foo1
$ xfs_io -f -c "falloc -k 0 128K" -c "pwrite -S 0xaa 0 64K" /mnt/sdc/foo2
wrote 65536/65536 bytes at offset 0
64 KiB, 16 ops; 0.0000 sec (520.833 MiB/sec and 133333.3333 ops/sec)
$ sync
$ xfs_io -c "pwrite -S 0xbb 64K 64K" /mnt/sdc/foo2
wrote 65536/65536 bytes at offset 65536
64 KiB, 16 ops; 0.0000 sec (260.417 MiB/sec and 66666.6667 ops/sec)
# The following should have reported 128K...
$ du -h /mnt/sdc/foo2
192K /mnt/sdc/foo2
$ sync
# After flushing the buffered write, it now reports the correct value.
$ du -h /mnt/sdc/foo2
128K /mnt/sdc/foo2
So the number of used file blocks is simply incorrect, unlike in other
filesystems such as ext4 and xfs for example, but only while the buffered
writes are not flushed.
Fix this by tracking the number of delalloc bytes that fall within holes
and beyond eof of a file, and use instead this new counter when reporting
the number of used blocks for an inode.
Another different problem that exists is that the delalloc bytes counter
is reset when writeback starts (by clearing the EXTENT_DEALLOC flag from
the respective range in the inode's iotree) and the vfs inode's bytes
counter is only incremented when writeback finishes (through
insert_reserved_file_extent()). Therefore while writeback is ongoing we
simply report a wrong number of blocks used by an inode if the write
operation covers a range previously unallocated. While this change does
not fix this problem, it does minimizes it a lot by shortening that time
window, as the new dealloc bytes counter (new_delalloc_bytes) is only
decremented when writeback finishes right before updating the vfs inode's
bytes counter. Fully fixing this second problem is not trivial and will
be addressed later by a different patch.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Normally we don't have inline extents followed by regular extents, but
there's currently at least one harmless case where this happens. For
example, when the page size is 4Kb and compression is enabled:
$ mkfs.btrfs -f /dev/sdb
$ mount -o compress /dev/sdb /mnt
$ xfs_io -f -c "pwrite -S 0xaa 0 4K" -c "fsync" /mnt/foobar
$ xfs_io -c "pwrite -S 0xbb 8K 4K" -c "fsync" /mnt/foobar
In this case we get a compressed inline extent, representing 4Kb of
data, followed by a hole extent and then a regular data extent. The
inline extent was not expanded/converted to a regular extent exactly
because it represents 4Kb of data. This does not cause any apparent
problem (such as the issue solved by commit e1699d2d7b
("btrfs: add missing memset while reading compressed inline extents"))
except trigger an unexpected case in the incremental send code path
that makes us issue an operation to write a hole when it's not needed,
resulting in more writes at the receiver and wasting space at the
receiver.
So teach the incremental send code to deal with this particular case.
The issue can be currently triggered by running fstests btrfs/137 with
compression enabled (MOUNT_OPTIONS="-o compress" ./check btrfs/137).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
If the call to btrfs_qgroup_reserve_data() failed, we were leaking an
extent map structure. The failure can happen either due to an -ENOMEM
condition or, when quotas are enabled, due to -EDQUOT for example.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[BUG]
If run_delalloc_range() returns error and there is already some ordered
extents created, btrfs will be hanged with the following backtrace:
Call Trace:
__schedule+0x2d4/0xae0
schedule+0x3d/0x90
btrfs_start_ordered_extent+0x160/0x200 [btrfs]
? wake_atomic_t_function+0x60/0x60
btrfs_run_ordered_extent_work+0x25/0x40 [btrfs]
btrfs_scrubparity_helper+0x1c1/0x620 [btrfs]
btrfs_flush_delalloc_helper+0xe/0x10 [btrfs]
process_one_work+0x2af/0x720
? process_one_work+0x22b/0x720
worker_thread+0x4b/0x4f0
kthread+0x10f/0x150
? process_one_work+0x720/0x720
? kthread_create_on_node+0x40/0x40
ret_from_fork+0x2e/0x40
[CAUSE]
|<------------------ delalloc range --------------------------->|
| OE 1 | OE 2 | ... | OE n |
|<>| |<---------- cleanup range --------->|
||
\_=> First page handled by end_extent_writepage() in __extent_writepage()
The problem is caused by error handler of run_delalloc_range(), which
doesn't handle any created ordered extents, leaving them waiting on
btrfs_finish_ordered_io() to finish.
However after run_delalloc_range() returns error, __extent_writepage()
won't submit bio, so btrfs_writepage_end_io_hook() won't be triggered
except the first page, and btrfs_finish_ordered_io() won't be triggered
for created ordered extents either.
So OE 2~n will hang forever, and if OE 1 is larger than one page, it
will also hang.
[FIX]
Introduce btrfs_cleanup_ordered_extents() function to cleanup created
ordered extents and finish them manually.
The function is based on existing
btrfs_endio_direct_write_update_ordered() function, and modify it to
act just like btrfs_writepage_endio_hook() but handles specified range
other than one page.
After fix, delalloc error will be handled like:
|<------------------ delalloc range --------------------------->|
| OE 1 | OE 2 | ... | OE n |
|<>|<-------- ----------->|<------ old error handler --------->|
|| ||
|| \_=> Cleaned up by cleanup_ordered_extents()
\_=> First page handled by end_extent_writepage() in __extent_writepage()
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
[BUG]
When btrfs_reloc_clone_csum() reports error, it can underflow metadata
and leads to kernel assertion on outstanding extents in
run_delalloc_nocow() and cow_file_range().
BTRFS info (device vdb5): relocating block group 12582912 flags data
BTRFS info (device vdb5): found 1 extents
assertion failed: inode->outstanding_extents >= num_extents, file: fs/btrfs//extent-tree.c, line: 5858
Currently, due to another bug blocking ordered extents, the bug is only
reproducible under certain block group layout and using error injection.
a) Create one data block group with one 4K extent in it.
To avoid the bug that hangs btrfs due to ordered extent which never
finishes
b) Make btrfs_reloc_clone_csum() always fail
c) Relocate that block group
[CAUSE]
run_delalloc_nocow() and cow_file_range() handles error from
btrfs_reloc_clone_csum() wrongly:
(The ascii chart shows a more generic case of this bug other than the
bug mentioned above)
|<------------------ delalloc range --------------------------->|
| OE 1 | OE 2 | ... | OE n |
|<----------- cleanup range --------------->|
|<----------- ----------->|
\/
btrfs_finish_ordered_io() range
So error handler, which calls extent_clear_unlock_delalloc() with
EXTENT_DELALLOC and EXTENT_DO_ACCOUNT bits, and btrfs_finish_ordered_io()
will both cover OE n, and free its metadata, causing metadata under flow.
[Fix]
The fix is to ensure after calling btrfs_add_ordered_extent(), we only
call error handler after increasing the iteration offset, so that
cleanup range won't cover any created ordered extent.
|<------------------ delalloc range --------------------------->|
| OE 1 | OE 2 | ... | OE n |
|<----------- ----------->|<---------- cleanup range --------->|
\/
btrfs_finish_ordered_io() range
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
For automatic module loading (e.g. as it is used with cryptsetup)
an alias "paes" for the paes_s390 kernel module is needed.
Correct the paes_s390 module alias from "aes-all" to "paes".
Signed-off-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Kabylake uses code loader dma and wait on notification instead of ipc
reply for load library ipc status. So modify the argument of
skl_sst_ipc_load_library to check on flag to wait for ipc reply.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
For audio kabylake is same as skylake except the module load approach.
This patch registers different dsp_fw_ops for kabylake and next patch
adds the module load support for kabylake.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Kabylake also uses code loader dma for module load and library load.
skl_transfer_module can be reused. Modify the arguments to include
library index to be passed to lib load ipc and module/lib check to use
correct ipc for lib/module load.
Signed-off-by: G Kranthi <gudishax.kranthikumar@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
request firmware, strip extended manifest and release library changes
are common to kabylake and APL.
So move these common code to utils to be reused in later patches for
kabylake library load.
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Some skl sst context are not dependent of platform and initializing them
independently for each platform can lead to errors. So optimize by
moving them to a helper function and platform specific init code can
call this.
Signed-off-by: G Kranthi <gudishax.kranthikumar@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove .owner field if calls are used which set it automatically.
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds support for using GPIOs for chipselects as described by the
default dt-bindings.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The caller only looks at the scsi_request result field anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
ide_pm_execute_rq exectures a PM request synchronously, and in the failure
case where it calls __blk_end_request_all it never checks the error field
passed to the end_io callback, so don't bother setting it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The SAS transport queues are only used by bsg, and bsg always looks at
the scsi_request results and never add the error passed in the end_io
callback.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Apparently some DP sinks are a little nuts and cause HPD to drop
intermittently during modesets. This happens eg. on an ASUS PB287Q.
In oder to recover from this we can't really use the previous
connector status to determine if the link needs retraining, so let's
just ignore that piece of information and do the retrain
unconditionally. We do of course still check whether the link is
supposed to be running or not.
To actually get read out the EDID and update things properly we
also need to nuke the goto out added by commit 7d23e3c37b
("drm/i915: Cleaning up intel_dp_hpd_pulse"). I'm actually not sure
why that was there. Perhaps to avoid an EDID read if the connector
status didn't appear to change, but that sort of thing is quite racy
and would have failed anyway if we failed to keep up with the
hotplugs (if we missed the HPD down in between two HPD ups). And
now that we take this codepath unconditionally we definitely need
to drop the goto as otherwise we would never do the EDID read.
v2: Drop the goto that made us skip EDID reads entirely. Doh!
v3: Rebase due to locking changes
s/apparely/apparently/ in the comment (Chris)
Cc: stable@vger.kernel.org
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Reported-by: Palmer Dabbelt <palmer@dabbelt.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99766
References: https://lists.freedesktop.org/archives/intel-gfx/2017-February/119779.html
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170412193017.21029-1-ville.syrjala@linux.intel.com
(cherry picked from commit 1a36147bb9)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Recently we merged the native xive support for Power9, and then separately some
reworks for doorbell IPI support. In isolation both series were OK, but the
merged result had a bug in one case.
On P9 DD1 we use pnv_p9_dd1_cause_ipi() which tries to use doorbells, and then
falls back to the interrupt controller. However the fallback is implemented by
calling icp_ops->cause_ipi. But now that xive support is merged we might be
using xive, in which case icp_ops is not initialised, it's a xics specific
structure. This leads to an oops such as:
Unable to handle kernel paging request for data at address 0x00000028
Oops: Kernel access of bad area, sig: 11 [#1]
NIP pnv_p9_dd1_cause_ipi+0x74/0xe0
LR smp_muxed_ipi_message_pass+0x54/0x70
To fix it, rather than using icp_ops which might be NULL, have both xics and
xive set smp_ops->cause_ipi, and then in the powernv code we save that as
ic_cause_ipi before overriding smp_ops->cause_ipi. For paranoia add a WARN_ON()
to check if somehow smp_ops->cause_ipi is NULL.
Fixes: b866cc2199 ("powerpc: Change the doorbell IPI calling convention")
Tested-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
If the engine is continually completing nops, we can saturate the
signaler and keep it working indefinitely. This angers the NMI watchdog!
A good example is to disable semaphores on snb and run igt/gem_exec_nop -
the parallel, multi-engine workloads are more than sufficient to hog the
CPU, preventing the system from even processing ICMP echo replies.
v2: Tvrtko dug into cond_resched() on x86 and found that it only
depended upon preempt_count and not tif_need_resched() - which means
that we would always call schedule() at that point.
Fixes: c81d46138d ("drm/i915: Convert trace-irq to the breadcrumb waiter")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170404120531.10737-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit a7980a640c)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Some of the event triggers can run fine in an instance. Have them tested in
one as well. The ones that still need work are the snapshot, stacktrace and
traceon/off triggers, as they don't currently pass a handle to the
trace_array they are attached to. But that can be for a future project.
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Some of the basic ftrace selftests should also be run in an instance. These
test a quick case of running all tracers in the available_tracers file
within the instance. The other is testing the clock used for the instance.
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The ftrace selftests of events: event-enable, event-pid, and
subsystem-enable can all be run inside an instance. Change their tests to do
both a toplevel run an an instance run.
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Both the func_event_triggers and func_traceonoff_triggers tests can be
performed in both the toplevel instance as well as for individual instances.
Have their tests run in both cases.
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
An tracing instance has several of the same capabilities as the top level
instance, but may be implemented slightly different. Instead of just writing
tests that duplicat the same test cases of the top level instance, allow a
test to be written for both the top level as well as for an instance.
If a test case can be run in both the top level as well as in an tracing
instance directory, then it should add a tag "# flags: instance" in the
header of the test file. Then after all tests have run, any test that has an
instance flag set, will run again within a tracing instance.
Link: http://lkml.kernel.org/r/20170421233850.1d0e9e05@gandalf.local.home
Cc: Shuah Khan <shuah@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The optimization for opaque dir create was wrongly being applied
also to non-dir create.
Fixes: 97c684cc91 ("ovl: create directories inside merged parent opaque")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org> # v4.10
