We always call nfs_mark_client_ready() even if nfs_create_rpc_client()
returns an error, so we can rearrange nfs_init_client() to mark the
client ready from a single place.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Removing the dprintk() lets us simplify the function by returning status
codes directly, rather than using a goto.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Removing the dprintk() lets us return the status value directly, rather
than jumping to a label if an error occurs.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
In addition to removing the dprintk(), this patch also initializes "res"
to the default return value instead of doing this through an else
condition.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Removing the dprintk()s lets us simplify the function by removing the
else condition entirely and returning the status of
initiate_{file,bulk}_draining() directly.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Johannes Berg says:
====================
A single fix, for the MU-MIMO monitor mode, that fixes
bad SKB accesses if the SKB was paged, which is the case
for the only driver supporting this - iwlwifi.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Flexfilelayout supports data servers which talk NFS v3 and v4.{0,1,2}.
However, this code path is disabled and v3 only servers are accepted.
This change removes this limitation.
Signed-off-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
NFS has some optimizations for readdir to choose between using READDIR or
READDIRPLUS based on workload, and which NFS operation to use is determined
by subsequent interactions with lookup, d_revalidate, and getattr.
Concurrent use of nfs_readdir() via ->iterate_shared() can cause those
optimizations to repeatedly invalidate the pagecache used to store
directory entries during readdir(), which causes some very bad performance
for directories with many entries (more than about 10000).
There's a couple ways to fix this in NFS, but no fix would be as simple as
going back to ->iterate() to serialize nfs_readdir(), and neither fix I
tested performed as well as going back to ->iterate().
The first required taking the directory's i_lock for each entry, with the
result of terrible contention.
The second way adds another flag to the nfs_inode, and so keeps the
optimizations working for large directories. The difference from using
->iterate() here is that much more memory is consumed for a given workload
without any performance gain.
The workings of nfs_readdir() are such that concurrent users are serialized
within read_cache_page() waiting to retrieve pages of entries from the
server. By serializing this work in iterate_dir() instead, contention for
cache pages is reduced. Waiting processes can have an uncontended pass at
the entirety of the directory's pagecache once previous processes have
completed filling it.
v2 - Keep the bits needed for parallel lookup
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
gcc 4.8.4 complains that mlx4_SW2HW_MPT_wrapper() uses an uninitialized
'mpt' variable:
drivers/net/ethernet/mellanox/mlx4/resource_tracker.c: In function 'mlx4_SW2HW_MPT_wrapper':
drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:2802:12: warning: 'mpt' may be used uninitialized in this function [-Wmaybe-uninitialized]
mpt->mtt = mtt;
I think this warning is a false complaint. mpt is only used when
mr_res_start_move_to() return zero, and in all such cases it initializes
mpt. But apparently gcc cannot see that.
Initialize mpt to avoid the warning.
Signed-off-by: Greg Thelen <gthelen@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since nr_queued is changed, we need to call wake_up here
if the array is already frozen and waiting for condition
"nr_pending == nr_queued + extra" to be true.
And commit 824e47dadd ("RAID1: avoid unnecessary spin
locks in I/O barrier code") which has already added the
wake_up for raid1.
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Use __le32 and __le64 instead of u32 and u64.
This fixes klibc build error:
In file included from /klibc/usr/klibc/../include/sys/md.h:30:0,
from /klibc/usr/kinit/do_mounts_md.c:19:
/linux-next/usr/include/linux/raid/md_p.h:414:51: error: 'u32' undeclared here (not in a function)
(PPL_HEADER_SIZE - PPL_HDR_RESERVED - 4 * sizeof(u32) - sizeof(u64))
Reported-by: Greg Thelen <gthelen@google.com>
Reported-by: Nigel Croxon <ncroxon@redhat.com>
Tested-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Compiling the DT file with W=1, DTC warns like follows:
Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a
unit name, but no reg property
Fix this by replacing '@' with '-' as the OPP nodes will never have a
"reg" property.
Reported-by: Krzysztof Kozlowski <krzk@kernel.org>
Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
[k.kozlowski: Split patch per ARM and ARM64]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
OPA VEMA function interfaces with the Infiniband MAD stack to exchange the
management information packets with the Ethernet Manager (EM).
It interfaces with the OPA VNIC netdev function to SET/GET the management
information. The information exchanged with the EM includes class port
details, encapsulation configuration, various counters, unicast and
multicast MAC list and the MAC table. It also supports sending traps
to the EM.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
OPA VNIC EMA interface functions are the management interfaces to the OPA
VNIC netdev. Add support to add and remove VNIC ports. Implement the
required GET/SET management interface functions and processing of new
management information. Add support to send trap notifications upon various
events like interface status change, unicast/multicast mac list update and
mac address change.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
OPA VNIC MAC table contains the MAC address to DLID mappings provided by
the Ethernet manager. During transmission, the MAC table provides the MAC
address to DLID translation. Implement MAC table using simple hash list.
Also provide support to update/query the MAC table by Ethernet manager.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
OPA VNIC driver statistics support maintains various counters including
standard netdev counters and the Ethernet manager defined counters.
Add the Ethtool hook to read the counters.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Define VNIC EM MAD structures and the associated macros. These structures
are used for information exchange between VNIC EM agent (EMA) on the host
and the Ethernet manager. These include the virtual ethernet switch (vesw)
port information, vesw port mac table, summay and error counters,
vesw port interface mac lists and the EMA trap.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
OPA VNIC netdev function supports Ethernet functionality over Omni-Path
fabric by encapsulating Ethernet packets inside Omni-Path packet header.
It allocates a rdma netdev device and interfaces with the network stack to
provide standard Ethernet network interfaces. It overrides HFI1 device's
netdev operations where it is required.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Sadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds the panel device tree node for s6e3hf2 display
controller to TM2e dts.
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
