The pldmfw library is used to implement common logic needed to flash
devices based on firmware files using the format described by the PLDM
for Firmware Update standard.
This library consists of logic to parse the PLDM file format from
a firmware file object, as well as common logic for sending the relevant
PLDM header data to the device firmware.
A simple ops table is provided so that device drivers can implement
device specific hardware interactions while keeping the common logic to
the pldmfw library.
This library will be used by the Intel ice networking driver as part of
implementing device flash update via devlink. The library aims to be
vendor and device agnostic. For this reason, it has been placed in
lib/pldmfw, in the hopes that other devices which use the PLDM firmware
file format may benefit from it in the future. However, do note that not
all features defined in the PLDM standard have been implemented.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
So the parser can be used to parse range property of ISA bus.
As they're all using PCI-like method of range property, there is no need
start a new parser.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Make sure not just the pointer itself but the whole range lies in
the user address space. For that pass the length and then use
the access_ok helper to do the check.
Fixes: 6d04fe15f7 ("net: optimize the sockptr_t for unified kernel/user address spaces")
Reported-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
sockptr_advance never properly worked. Replace it with _offset variants
of copy_from_sockptr and copy_to_sockptr.
Fixes: ba423fdaa5 ("net: add a new sockptr_t type")
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While the kernel in general is not strict aliasing safe we can trivially
do that in sockptr_is_null without affecting code generation, so always
check the actually assigned union member.
Reported-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
When setting the PF interface up/down, notify the firmware to update
uplink state via MODIFY_VPORT_STATE, when E-Switch is enabled.
This behavior will prevent sending traffic out on uplink port when PF is
down, such as sending traffic from a VF interface which is still up.
Currently when calling mlx5e_open/close(), the driver only sends PAOS
command to notify the firmware to set the physical port state to
up/down, however, it is not sufficient. When VF is in "auto" state, it
follows the uplink state, which was not updated on mlx5e_open/close()
before this patch.
When switchdev mode is enabled and uplink representor is first enabled,
set the uplink port state value back to its FW default "AUTO".
Fixes: 63bfd399de ("net/mlx5e: Send PAOS command on interface up/down")
Signed-off-by: Ron Diskin <rondi@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Currently migrate_vma_setup() calls mmu_notifier_invalidate_range_start()
which flushes all device private page mappings whether or not a page is
being migrated to/from device private memory.
In order to not disrupt device mappings that are not being migrated, shift
the responsibility for clearing device private mappings to the device
driver and leave CPU page table unmapping handled by
migrate_vma_setup().
To support this, the caller of migrate_vma_setup() should always set
struct migrate_vma::pgmap_owner to a non NULL value that matches the
device private page->pgmap->owner. This value is then passed to the struct
mmu_notifier_range with a new event type which the driver's invalidation
function can use to avoid device MMU invalidations.
Link: https://lore.kernel.org/r/20200723223004.9586-4-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The src_owner field in struct migrate_vma is being used for two purposes,
it acts as a selection filter for which types of pages are to be migrated
and it identifies device private pages owned by the caller.
Split this into separate parameters so the src_owner field can be used
just to identify device private pages owned by the caller of
migrate_vma_setup().
Rename the src_owner field to pgmap_owner to reflect it is now used only
to identify which device private pages to migrate.
Link: https://lore.kernel.org/r/20200723223004.9586-3-rcampbell@nvidia.com
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Reviewed-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Pull asm-generic bugfix from Arnd Bergmann:
"A single bugfix for a regression introduced through a typo in the v5.8
merge window, leading to incorrect data returned from inl() on some
architectures"
* tag 'asm-generic-fixes-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
io: Fix return type of _inb and _inl
No need to define typedefs for the callbacks, because there is not a
single user except blk_mq_ops.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Johan writes:
USB-serial updates for 5.9-rc1
Here are the USB-serial updates for 5.9-rc1, including:
- console flow-control support
- simulated line-breaks on some ch341
- hardware flow-control fixes for cp210x
- break-detection and sysrq fixes for ftdi_sio
- sysrq optimisations
- input parity checking for cp210x
Included are also some new device ids and various clean ups.
All have been in linux-next with no reported issues.
* tag 'usb-serial-5.9-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: (31 commits)
USB: serial: qcserial: add EM7305 QDL product ID
USB: serial: iuu_phoenix: fix led-activity helpers
USB: serial: sierra: clean up special-interface handling
USB: serial: cp210x: use in-kernel types in port data
USB: serial: cp210x: drop unnecessary packed attributes
USB: serial: cp210x: add support for TIOCGICOUNT
USB: serial: cp210x: add support for line-status events
USB: serial: cp210x: disable interface on errors in open
USB: serial: drop redundant transfer-buffer casts
USB: serial: drop extern keyword from function declarations
USB: serial: drop unnecessary sysrq include
USB: serial: add sysrq break-handler dummy
USB: serial: inline sysrq dummy function
USB: serial: only process sysrq when enabled
USB: serial: only set sysrq timestamp for consoles
USB: serial: ftdi_sio: fix break and sysrq handling
USB: serial: ftdi_sio: clean up receive processing
USB: serial: ftdi_sio: make process-packet buffer unsigned
USB: serial: use fallthrough pseudo-keyword
USB: serial: ch341: fix missing simulated-break margin
...
Devices sitting on proprietary busses have a device ID space that
is owned by the respective bus and related firmware bindings. In order
to let the generic OF layer handle the input translations to
an IOMMU id, for such busses the current of_dma_configure() interface
should be extended in order to allow the bus layer to provide the
device input id parameter - that is retrieved/assigned in bus
specific code and firmware.
Augment of_dma_configure() to add an optional input_id parameter,
leaving current functionality unchanged.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Link: https://lore.kernel.org/r/20200619082013.13661-8-lorenzo.pieralisi@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Some HW devices are created as child devices of proprietary busses,
that have a bus specific policy defining how the child devices
wires representing the devices ID are translated into IOMMU and
IRQ controllers device IDs.
Current IORT code provides translations for:
- PCI devices, where the device ID is well identified at bus level
as the requester ID (RID)
- Platform devices that are endpoint devices where the device ID is
retrieved from the ACPI object IORT mappings (Named components single
mappings). A platform device is represented in IORT as a named
component node
For devices that are child devices of proprietary busses the IORT
firmware represents the bus node as a named component node in IORT
and it is up to that named component node to define in/out bus
specific ID translations for the bus child devices that are
allocated and created in a bus specific manner.
In order to make IORT ID translations available for proprietary
bus child devices, the current ACPI (and IORT) code must be
augmented to provide an additional ID parameter to acpi_dma_configure()
representing the child devices input ID. This ID is bus specific
and it is retrieved in bus specific code.
By adding an ID parameter to acpi_dma_configure(), the IORT
code can map the child device ID to an IOMMU stream ID through
the IORT named component representing the bus in/out ID mappings.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Link: https://lore.kernel.org/r/20200619082013.13661-6-lorenzo.pieralisi@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Per page request event, FW request to allocated or release pages for a
single function. Driver maintains FW pages object per function, so there
is no need to hold one global page data-base. Instead, have a page
data-base per function, which will improve performance release flow in all
cases, especially for "release all pages".
As the range of function IDs is large and not sequential, use xarray to
store a per function ID page data-base, where the function ID is the key.
Upon first allocation of a page to a function ID, create the page
data-base per function. This data-base will be released only at pagealloc
mechanism cleanup.
NIC: ConnectX-4 Lx
CPU: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz
Test case: 32 VFs, measure release pages on one VF as part of FLR
Before: 0.021 Sec
After: 0.014 Sec
The improvement depends on amount of VFs and memory utilization
by them. Time measurements above were taken from idle system.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Currently lockdep_types.h includes list.h without actually using any
of its macros or functions. All it needs are the type definitions
which were moved into types.h long ago. This potentially causes
inclusion loops because both are included by many core header
files.
This patch moves the list.h inclusion into lockdep.h. Note that
we could probably remove it completely but that could potentially
result in compile failures should any end users not include list.h
directly and also be unlucky enough to not get list.h via some other
header file.
Reported-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Petr Mladek <pmladek@suse.com>
Link: https://lkml.kernel.org/r/20200716063649.GA23065@gondor.apana.org.au
For some reason they tend to squat on the very first CSR/
Cambridge Silicon Radio VID/PID instead of paying fees.
This is an extremely common problem; the issue goes as back as 2013
and these devices are only getting more popular, even rebranded by
reputable vendors and sold by retailers everywhere.
So, at this point in time there are hundreds of modern dongles reusing
the ID of what originally was an early Bluetooth 1.1 controller.
Linux is the only place where they don't work due to spotty checks
in our detection code. It only covered a minimum subset.
So what's the big idea? Take advantage of the fact that all CSR
chips report the same internal version as both the LMP sub-version and
HCI revision number. It always matches, couple that with the manufacturer
code, that rarely lies, and we now have a good idea of who is who.
Additionally, by compiling a list of user-reported HCI/lsusb dumps, and
searching around for legit CSR dongles in similar product ranges we can
find what CSR BlueCore firmware supported which Bluetooth versions.
That way we can narrow down ranges of fakes for each of them.
e.g. Real CSR dongles with LMP subversion 0x73 are old enough that
support BT 1.1 only; so it's a dead giveaway when some
third-party BT 4.0 dongle reuses it.
So, to sum things up; there are multiple classes of fake controllers
reusing the same 0A12:0001 VID/PID. This has been broken for a while.
Known 'fake' bcdDevices: 0x0100, 0x0134, 0x1915, 0x2520, 0x7558, 0x8891
IC markings on 0x7558: FR3191AHAL 749H15143 (???)
https://bugzilla.kernel.org/show_bug.cgi?id=60824
Fixes: 81cac64ba2 (Deal with USB devices that are faking CSR vendor)
Reported-by: Michał Wiśniewski <brylozketrzyn@gmail.com>
Tested-by: Mike Johnson <yuyuyak@gmail.com>
Tested-by: Ricardo Rodrigues <ekatonb@gmail.com>
Tested-by: M.Hanny Sabbagh <mhsabbagh@outlook.com>
Tested-by: Oussama BEN BRAHIM <b.brahim.oussama@gmail.com>
Tested-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com>
Signed-off-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The glue layer may need to know current available role to do some
setting, eg, the wakeup setting. So we add ci_hdrc_query_available_role
for that.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Provide DIV_S64_ROUND_CLOSEST helper which uses div_s64 to perform
division rounded to the closest integer using signed 64bit
dividend and signed 32bit divisor.
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The method handle_event() grew a lot of complexity due to the design of
fanotify and merging of ignore masks.
Most backends do not care about this complex functionality, so we can hide
this complexity from them.
Introduce a method handle_inode_event() that serves those backends and
passes a single inode mark and less arguments.
This change converts all backends except fanotify and inotify to use the
simplified handle_inode_event() method. In pricipal, inotify could have
also used the new method, but that would require passing more arguments
on the simple helper (data, data_type, cookie), so we leave it with the
handle_event() method.
Link: https://lore.kernel.org/r/20200722125849.17418-9-amir73il@gmail.com
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Introduce a new fanotify_init() flag FAN_REPORT_NAME. It requires the
flag FAN_REPORT_DIR_FID and there is a constant for setting both flags
named FAN_REPORT_DFID_NAME.
For a group with flag FAN_REPORT_NAME, the parent fid and name are
reported for directory entry modification events (create/detete/move)
and for events on non-directory objects.
Events on directories themselves are reported with their own fid and
"." as the name.
The parent fid and name are reported with an info record of type
FAN_EVENT_INFO_TYPE_DFID_NAME, similar to the way that parent fid is
reported with into type FAN_EVENT_INFO_TYPE_DFID, but with an appended
null terminated name string.
Link: https://lore.kernel.org/r/20200716084230.30611-21-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
For now, the flag is mutually exclusive with FAN_REPORT_FID.
Events include a single info record of type FAN_EVENT_INFO_TYPE_DFID
with a directory file handle.
For now, events are only reported for:
- Directory modification events
- Events on children of a watching directory
- Events on directory objects
Soon, we will add support for reporting the parent directory fid
for events on non-directories with filesystem/mount mark and
support for reporting both parent directory fid and child fid.
Link: https://lore.kernel.org/r/20200716084230.30611-19-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Remove the unneeded check for positive source dentry in
fsnotify_move().
fsnotify_move() hook is mostly called from vfs_rename() under
lock_rename() and vfs_rename() starts with may_delete() test that
verifies positive source dentry. The only other caller of
fsnotify_move() - debugfs_rename() also verifies positive source.
Link: https://lore.kernel.org/r/20200716084230.30611-17-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Similar to events "on child" to watching directory, send event
with parent/name info if sb/mount/non-dir marks are interested in
parent/name info.
The FS_EVENT_ON_CHILD flag can be set on sb/mount/non-dir marks to specify
interest in parent/name info for events on non-directory inodes.
Events on "orphan" children (disconnected dentries) are sent without
parent/name info.
Events on directories are sent with parent/name info only if the parent
directory is watching.
After this change, even groups that do not subscribe to events on
children could get an event with mark iterator type TYPE_CHILD and
without mark iterator type TYPE_INODE if fanotify has marks on the same
objects.
dnotify and inotify event handlers can already cope with that situation.
audit does not subscribe to events that are possible on child, so won't
get to this situation. nfsd does not access the marks iterator from its
event handler at the moment, so it is not affected.
This is a bit too fragile, so we should prepare all groups to cope with
mark type TYPE_CHILD preferably using a generic helper.
Link: https://lore.kernel.org/r/20200716084230.30611-16-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
The arguments of fsnotify() are overloaded and mean different things
for different event types.
Replace the to_tell argument with separate arguments @dir and @inode,
because we may be sending to both dir and child. Using the @data
argument to pass the child is not enough, because dirent events pass
this argument (for audit), but we do not report to child.
Document the new fsnotify() function argumenets.
Link: https://lore.kernel.org/r/20200722125849.17418-7-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
The object type iterator is used to collect all the marks of
a specific group that have interest in an event.
It is used by fanotify to get a single handle_event callback
when an event has a match to either of inode/sb/mount marks
of the group.
The nature of fsnotify events is that they are associated with
at most one sb at most one mount and at most one inode.
When a parent and child are both watching, two events are sent
to backend, one associated to parent inode and one associated
to the child inode.
This results in duplicate events in fanotify, which usually
get merged before user reads them, but this is sub-optimal.
It would be better if the same event is sent to backend with
an object type iterator that has both the child inode and its
parent, and let the backend decide if the event should be reported
once (fanotify) or twice (inotify).
Link: https://lore.kernel.org/r/20200716084230.30611-9-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
It was never enabled in uapi and its functionality is about to be
superseded by events FAN_CREATE, FAN_DELETE, FAN_MOVE with group
flag FAN_REPORT_NAME.
Keep a place holder variable name_event instead of removing the
name recording code since it will be used by the new events.
Link: https://lore.kernel.org/r/20200708111156.24659-17-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Parallel Redundancy Protocol (PRP) is another redundancy protocol
introduced by IEC 63439 standard. It is similar to HSR in many
aspects:-
- Use a pair of Ethernet interfaces to created the PRP device
- Use a 6 byte redundancy protocol part (RCT, Redundancy Check
Trailer) similar to HSR Tag.
- Has Link Redundancy Entity (LRE) that works with RCT to implement
redundancy.
Key difference is that the protocol unit is a trailer instead of a
prefix as in HSR. That makes it inter-operable with tradition network
components such as bridges/switches which treat it as pad bytes,
whereas HSR nodes requires some kind of translators (Called redbox) to
talk to regular network devices. This features allows regular linux box
to be converted to a DAN-P box. DAN-P stands for Dual Attached Node - PRP
similar to DAN-H (Dual Attached Node - HSR).
Add a comment at the header/source code to explicitly state that the
driver files also handles PRP protocol as well.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Define the VFS inode flags using bit numbers instead of hardcoding
powers of 2, which has become unwieldy now that we're up to 65536.
No change in the actual values.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
->regset_get() takes task+regset+buffer, returns the amount of free space
left in the buffer on success and -E... on error.
buffer is represented as struct membuf - a pair of (kernel) pointer
and amount of space left
Primitives for writing to such:
* membuf_write(buf, data, size)
* membuf_zero(buf, size)
* membuf_store(buf, value)
These are implemented as inlines (in case of membuf_store - a macro).
All writes are sequential; they become no-ops when there's no space
left. Return value of all primitives is the amount of space left
after the operation, so they can be used as return values of ->regset_get().
Example of use:
// stores pt_regs of task + 64 bytes worth of zeroes + 32bit PID of task
int foo_get(struct task_struct *task, const struct regset *regset,
struct membuf to)
{
membuf_write(&to, task_pt_regs(task), sizeof(struct pt_regs));
membuf_zero(&to, 64);
return membuf_store(&to, (u32)task_tgid_vnr(task));
}
regset_get()/regset_get_alloc() taught to use that thing if present.
By the end of the series all users of ->get() will be converted;
then ->get() and ->get_size() can go.
Note that unlike ->get() this thing always starts at offset 0 and,
since it only writes to kernel buffer, can't fail on copyout.
It can, of course, fail for other reasons, but those tend to
be less numerous.
The caller guarantees that the buffer size won't be bigger than
regset->n * regset->size. That simplifies life for quite a few
instances.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
