[ Upstream commit c7d13358b6 ]
This extension breaks when trying to delete rules, add a new revision to
fix this.
Fixes: 5e6874cdb8 ("[SECMARK]: Add xtables SECMARK target")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f282df0391 ]
Normally SCTP_MIB_CURRESTAB is always incremented once asoc enter into
ESTABLISHED from the state < ESTABLISHED and decremented when the asoc
is being deleted.
However, in sctp_sf_do_dupcook_b(), the asoc's state can be changed to
ESTABLISHED from the state >= ESTABLISHED where it shouldn't increment
SCTP_MIB_CURRESTAB. Otherwise, one asoc may increment MIB_CURRESTAB
multiple times but only decrement once at the end.
I was able to reproduce it by using scapy to do the 4-way shakehands,
after that I replayed the COOKIE-ECHO chunk with 'peer_vtag' field
changed to different values, and SCTP_MIB_CURRESTAB was incremented
multiple times and never went back to 0 even when the asoc was freed.
This patch is to fix it by only incrementing SCTP_MIB_CURRESTAB when
the state < ESTABLISHED in sctp_sf_do_dupcook_b().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 643001b47a ]
In enic_hard_start_xmit, it calls enic_queue_wq_skb(). Inside
enic_queue_wq_skb, if some error happens, the skb will be freed
by dev_kfree_skb(skb). But the freed skb is still used in
skb_tx_timestamp(skb).
My patch makes enic_queue_wq_skb() return error and goto spin_unlock()
incase of error. The solution is provided by Govind.
See https://lkml.org/lkml/2021/4/30/961.
Fixes: fb7516d424 ("enic: add sw timestamp support")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Acked-by: Govindarajulu Varadarajan <gvaradar@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 35b4f24415 ]
There's a panic that occurs in a few of envs, the call trace is as below:
[] general protection fault, ... 0x29acd70f1000a: 0000 [#1] SMP PTI
[] RIP: 0010:sctp_ulpevent_notify_peer_addr_change+0x4b/0x1fa [sctp]
[] sctp_assoc_control_transport+0x1b9/0x210 [sctp]
[] sctp_do_8_2_transport_strike.isra.16+0x15c/0x220 [sctp]
[] sctp_cmd_interpreter.isra.21+0x1231/0x1a10 [sctp]
[] sctp_do_sm+0xc3/0x2a0 [sctp]
[] sctp_generate_timeout_event+0x81/0xf0 [sctp]
This is caused by a transport use-after-free issue. When processing a
duplicate COOKIE-ECHO chunk in sctp_sf_do_dupcook_a(), both COOKIE-ACK
and SHUTDOWN chunks are allocated with the transort from the new asoc.
However, later in the sideeffect machine, the old asoc is used to send
them out and old asoc's shutdown_last_sent_to is set to the transport
that SHUTDOWN chunk attached to in sctp_cmd_setup_t2(), which actually
belongs to the new asoc. After the new_asoc is freed and the old asoc
T2 timeout, the old asoc's shutdown_last_sent_to that is already freed
would be accessed in sctp_sf_t2_timer_expire().
Thanks Alexander and Jere for helping dig into this issue.
To fix it, this patch is to do the asoc update first, then allocate
the COOKIE-ACK and SHUTDOWN chunks with the 'updated' old asoc. This
would make more sense, as a chunk from an asoc shouldn't be sent out
with another asoc. We had fixed quite a few issues caused by this.
Fixes: 145cb2f717 ("sctp: Fix bundling of SHUTDOWN with COOKIE-ACK")
Reported-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Reported-by: syzbot+bbe538efd1046586f587@syzkaller.appspotmail.com
Reported-by: Michal Tesar <mtesar@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 472497d0bd ]
If selftest and reset are performed at the same time, the phy
loopback setting may be still in enable state after the reset,
and device cannot link up. So fix this issue by disabling phy
loopback before phy_start().
Fixes: 256727da73 ("net: hns3: Add MDIO support to HNS3 Ethernet driver for hip08 SoC")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73f5c88f52 ]
Currently the client ignores the value of the sr_eof of the SEEK
operation. According to the spec, if the server didn't find the
requested extent and reached the end of the file, the server
would return sr_eof=true. In case the request for DATA and no
data was found (ie in the middle of the hole), then the lseek
expects that ENXIO would be returned.
Fixes: 1c6dcbe5ce ("NFS: Implement SEEK")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed34695e15 ]
We (adam zabrocki, alexander matrosov, alexander tereshkin, maksym
bazalii) observed the check:
if (fh->size > sizeof(struct nfs_fh))
should not use the size of the nfs_fh struct which includes an extra two
bytes from the size field.
struct nfs_fh {
unsigned short size;
unsigned char data[NFS_MAXFHSIZE];
}
but should determine the size from data[NFS_MAXFHSIZE] so the memcpy
will not write 2 bytes beyond destination. The proposed fix is to
compare against the NFS_MAXFHSIZE directly, as is done elsewhere in fs
code base.
Fixes: d67ae825a5 ("pnfs/flexfiles: Add the FlexFile Layout Driver")
Signed-off-by: Nikola Livic <nlivic@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9fdbfad177 ]
We need to use unsigned long subtraction and then convert to signed in
order to deal correcly with C overflow rules.
Fixes: f506200346 ("NFS: Set an attribute barrier on all updates")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99f2378322 ]
Whether we're allocating or delallocating space, we should flush out the
pending writes in order to avoid races with attribute updates.
Fixes: 1e564d3dbd ("NFSv4.2: Fix a race in nfs42_proc_deallocate()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28e18ee636 ]
The uninitialized variable dn.node_changed does not get set when a
call to f2fs_get_node_page fails. This uninitialized value gets used
in the call to f2fs_balance_fs() that may or not may not balances
dirty node and dentry pages depending on the uninitialized state of
the variable. Fix this by only calling f2fs_balance_fs if err is
not set.
Thanks to Jaegeuk Kim for suggesting an appropriate fix.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: 2a34076070 ("f2fs: call f2fs_balance_fs only when node was changed")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99e729bd40 ]
Noticed failure as a crash on ia64 when tried to symbolize all backtraces
collected by page_owner=on:
$ cat /sys/kernel/debug/page_owner
<oops>
CPU: 1 PID: 2074 Comm: cat Not tainted 5.12.0-rc4 #226
Hardware name: hp server rx3600, BIOS 04.03 04/08/2008
ip is at dereference_module_function_descriptor+0x41/0x100
Crash happens at dereference_module_function_descriptor() due to
use-after-free when dereferencing ".opd" section header.
All section headers are already freed after module is laoded successfully.
To keep symbolizer working the change stores ".opd" address and size after
module is relocated to a new place and before section headers are
discarded.
To make similar errors less obscure module_finalize() now zeroes out all
variables relevant to module loading only.
Link: https://lkml.kernel.org/r/20210403074803.3309096-1-slyfox@gentoo.org
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f57d8c40f ]
The VLAN ID in the rx descriptor is only valid if the RX_DMA_VTAG bit is
set. Fixes frames wrongly marked with VLAN tags.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
[Ilya: fix commit message]
Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc7130bf11 ]
The IOMMU table is divided into pools for concurrent mappings and each
pool has a separate spinlock. When taking the ownership of an IOMMU group
to pass through a device to a VM, we lock these spinlocks which triggers
a false negative warning in lockdep (below).
This fixes it by annotating the large pool's spinlock as a nest lock
which makes lockdep not complaining when locking nested locks if
the nest lock is locked already.
===
WARNING: possible recursive locking detected
5.11.0-le_syzkaller_a+fstn1 #100 Not tainted
--------------------------------------------
qemu-system-ppc/4129 is trying to acquire lock:
c0000000119bddb0 (&(p->lock)/1){....}-{2:2}, at: iommu_take_ownership+0xac/0x1e0
but task is already holding lock:
c0000000119bdd30 (&(p->lock)/1){....}-{2:2}, at: iommu_take_ownership+0xac/0x1e0
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(p->lock)/1);
lock(&(p->lock)/1);
===
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210301063653.51003-1-aik@ozlabs.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb43e5718d ]
Fix the following out-of-bounds warnings by adding a new structure
wl3501_req instead of duplicating the same members in structure
wl3501_join_req and wl3501_scan_confirm:
arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [39, 108] from the object at 'sig' is out of the bounds of referenced subobject 'beacon_period' with type 'short unsigned int' at offset 36 [-Warray-bounds]
arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [25, 95] from the object at 'sig' is out of the bounds of referenced subobject 'beacon_period' with type 'short unsigned int' at offset 22 [-Warray-bounds]
Refactor the code, accordingly:
$ pahole -C wl3501_req drivers/net/wireless/wl3501_cs.o
struct wl3501_req {
u16 beacon_period; /* 0 2 */
u16 dtim_period; /* 2 2 */
u16 cap_info; /* 4 2 */
u8 bss_type; /* 6 1 */
u8 bssid[6]; /* 7 6 */
struct iw_mgmt_essid_pset ssid; /* 13 34 */
struct iw_mgmt_ds_pset ds_pset; /* 47 3 */
struct iw_mgmt_cf_pset cf_pset; /* 50 8 */
struct iw_mgmt_ibss_pset ibss_pset; /* 58 4 */
struct iw_mgmt_data_rset bss_basic_rset; /* 62 10 */
/* size: 72, cachelines: 2, members: 10 */
/* last cacheline: 8 bytes */
};
$ pahole -C wl3501_join_req drivers/net/wireless/wl3501_cs.o
struct wl3501_join_req {
u16 next_blk; /* 0 2 */
u8 sig_id; /* 2 1 */
u8 reserved; /* 3 1 */
struct iw_mgmt_data_rset operational_rset; /* 4 10 */
u16 reserved2; /* 14 2 */
u16 timeout; /* 16 2 */
u16 probe_delay; /* 18 2 */
u8 timestamp[8]; /* 20 8 */
u8 local_time[8]; /* 28 8 */
struct wl3501_req req; /* 36 72 */
/* size: 108, cachelines: 2, members: 10 */
/* last cacheline: 44 bytes */
};
$ pahole -C wl3501_scan_confirm drivers/net/wireless/wl3501_cs.o
struct wl3501_scan_confirm {
u16 next_blk; /* 0 2 */
u8 sig_id; /* 2 1 */
u8 reserved; /* 3 1 */
u16 status; /* 4 2 */
char timestamp[8]; /* 6 8 */
char localtime[8]; /* 14 8 */
struct wl3501_req req; /* 22 72 */
/* --- cacheline 1 boundary (64 bytes) was 30 bytes ago --- */
u8 rssi; /* 94 1 */
/* size: 96, cachelines: 2, members: 8 */
/* padding: 1 */
/* last cacheline: 32 bytes */
};
The problem is that the original code is trying to copy data into a
bunch of struct members adjacent to each other in a single call to
memcpy(). Now that a new struct wl3501_req enclosing all those adjacent
members is introduced, memcpy() doesn't overrun the length of
&sig.beacon_period and &this->bss_set[i].beacon_period, because the
address of the new struct object _req_ is used as the destination,
instead.
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1fbaf516da763b50edac47d792a9145aa4482e29.1618442265.git.gustavoars@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 820aa37638 ]
Fix the following out-of-bounds warnings by enclosing structure members
daddr and saddr into new struct addr, in structures wl3501_md_req and
wl3501_md_ind:
arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [18, 23] from the object at 'sig' is out of the bounds of referenced subobject 'daddr' with type 'u8[6]' {aka 'unsigned char[6]'} at offset 11 [-Warray-bounds]
arch/x86/include/asm/string_32.h:182:25: warning: '__builtin_memcpy' offset [18, 23] from the object at 'sig' is out of the bounds of referenced subobject 'daddr' with type 'u8[6]' {aka 'unsigned char[6]'} at offset 11 [-Warray-bounds]
Refactor the code, accordingly:
$ pahole -C wl3501_md_req drivers/net/wireless/wl3501_cs.o
struct wl3501_md_req {
u16 next_blk; /* 0 2 */
u8 sig_id; /* 2 1 */
u8 routing; /* 3 1 */
u16 data; /* 4 2 */
u16 size; /* 6 2 */
u8 pri; /* 8 1 */
u8 service_class; /* 9 1 */
struct {
u8 daddr[6]; /* 10 6 */
u8 saddr[6]; /* 16 6 */
} addr; /* 10 12 */
/* size: 22, cachelines: 1, members: 8 */
/* last cacheline: 22 bytes */
};
$ pahole -C wl3501_md_ind drivers/net/wireless/wl3501_cs.o
struct wl3501_md_ind {
u16 next_blk; /* 0 2 */
u8 sig_id; /* 2 1 */
u8 routing; /* 3 1 */
u16 data; /* 4 2 */
u16 size; /* 6 2 */
u8 reception; /* 8 1 */
u8 pri; /* 9 1 */
u8 service_class; /* 10 1 */
struct {
u8 daddr[6]; /* 11 6 */
u8 saddr[6]; /* 17 6 */
} addr; /* 11 12 */
/* size: 24, cachelines: 1, members: 9 */
/* padding: 1 */
/* last cacheline: 24 bytes */
};
The problem is that the original code is trying to copy data into a
couple of arrays adjacent to each other in a single call to memcpy().
Now that a new struct _addr_ enclosing those two adjacent arrays
is introduced, memcpy() doesn't overrun the length of &sig.daddr[0]
and &sig.daddr, because the address of the new struct object _addr_
is used, instead.
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/d260fe56aed7112bff2be5b4d152d03ad7b78e78.1618442265.git.gustavoars@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed8029d7b4 ]
RCU complains about us calling printk() from an offline CPU:
=============================
WARNING: suspicious RCU usage
5.12.0-rc7-02874-g7cf90e481cb8 #1 Not tainted
-----------------------------
kernel/locking/lockdep.c:3568 RCU-list traversed in non-reader section!!
other info that might help us debug this:
RCU used illegally from offline CPU!
rcu_scheduler_active = 2, debug_locks = 1
no locks held by swapper/0/0.
stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc7-02874-g7cf90e481cb8 #1
Call Trace:
dump_stack+0xec/0x144 (unreliable)
lockdep_rcu_suspicious+0x124/0x144
__lock_acquire+0x1098/0x28b0
lock_acquire+0x128/0x600
_raw_spin_lock_irqsave+0x6c/0xc0
down_trylock+0x2c/0x70
__down_trylock_console_sem+0x60/0x140
vprintk_emit+0x1a8/0x4b0
vprintk_func+0xcc/0x200
printk+0x40/0x54
pseries_cpu_offline_self+0xc0/0x120
arch_cpu_idle_dead+0x54/0x70
do_idle+0x174/0x4a0
cpu_startup_entry+0x38/0x40
rest_init+0x268/0x388
start_kernel+0x748/0x790
start_here_common+0x1c/0x614
Which happens because by the time we get to rtas_stop_self() we are
already offline. In addition the message can be spammy, and is not that
helpful for users, so remove it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210418135413.1204031-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1d9e34e11 ]
Fix the following out-of-bounds warning:
net/ethtool/ioctl.c:492:2: warning: 'memcpy' offset [49, 84] from the object at 'link_usettings' is out of the bounds of referenced subobject 'base' with type 'struct ethtool_link_settings' at offset 0 [-Warray-bounds]
The problem is that the original code is trying to copy data into a
some struct members adjacent to each other in a single call to
memcpy(). This causes a legitimate compiler warning because memcpy()
overruns the length of &link_usettings.base. Fix this by directly
using &link_usettings and _from_ as destination and source addresses,
instead.
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5272ad4aa ]
Fix the following out-of-bounds warning:
net/sctp/sm_make_chunk.c:3150:4: warning: 'memcpy' offset [17, 28] from the object at 'addr' is out of the bounds of referenced subobject 'v4' with type 'struct sockaddr_in' at offset 0 [-Warray-bounds]
This helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines
on memcpy().
Link: https://github.com/KSPP/linux/issues/109
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c94b430b9 ]
If the user selects the very first entry in a page and performs a
search-up operation, or selects the very last entry in a page and
performs a search-down operation that will not succeed (e.g., via
[/]asdfzzz[Up Arrow]), nconf will never terminate searching the page.
The reason is that in this case, the starting point will be set to -1
or n, which is then translated into (n - 1) (i.e., the last entry of
the page) or 0 (i.e., the first entry of the page) and finally the
search begins. This continues to work fine until the index reaches 0 or
(n - 1), at which point it will be decremented to -1 or incremented to
n, but not checked against the starting point right away. Instead, it's
wrapped around to the bottom or top again, after which the starting
point check occurs... and naturally fails.
My original implementation added another check for -1 before wrapping
the running index variable around, but Masahiro Yamada pointed out that
the actual issue is that the comparison point (starting point) exceeds
bounds (i.e., the [0,n-1] interval) in the first place and that,
instead, the starting point should be fixed.
This has the welcome side-effect of also fixing the case where the
starting point was n while searching down, which also lead to an
infinite loop.
OTOH, this code is now essentially all his work.
Amazingly, nobody seems to have been hit by this for 11 years - or at
the very least nobody bothered to debug and fix this.
Signed-off-by: Mihai Moldovan <ionic@ionic.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26e6dd1072 ]
selftests/bpf/Makefile includes lib.mk. With the following command
make -j60 LLVM=1 LLVM_IAS=1 <=== compile kernel
make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1 V=1
some files are still compiled with gcc. This patch
fixed lib.mk issue which sets CC to gcc in all cases.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210413153413.3027426-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8217673d07 ]
For cloned connections cuse_channel_release() will be called more than
once, resulting in use after free.
Prevent device cloning for CUSE, which does not make sense at this point,
and highly unlikely to be used in real life.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa0c10a5f3 ]
The Special Function Registers on all Exynos SoC, including ARM64, are
32-bit wide, so entire driver uses matching functions like readl() or
writel(). On 64-bit ARM using unsigned long for register masks:
1. makes little sense as immediately after bitwise operation it will be
cast to 32-bit value when calling writel(),
2. is actually error-prone because it might promote other operands to
64-bit.
Addresses-Coverity: Unintentional integer overflow
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Link: https://lore.kernel.org/r/20210408195029.69974-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d6843d1ee2 ]
After channel switch, we should consider any beacon with a
CSA IE as a new switch. If the CSA IE is a leftover from
before the switch that the AP forgot to remove, we'll get
a CSA-to-Self.
This caused issues in iwlwifi where the firmware saw a beacon
with a CSA-to-Self with mode = 1 on the new channel after a
switch. The firmware considered this a new switch and closed
its queues. Since the beacon didn't change between before and
after the switch, we wouldn't handle it (the CRC is the same)
and we wouldn't let the firmware open its queues again or
disconnect if the CSA IE stays for too long.
Clear the CRC valid state after we switch to make sure that
we handle the beacon and handle the CSA IE as required.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://lore.kernel.org/r/20210408143124.b9e68aa98304.I465afb55ca2c7d59f7bf610c6046a1fd732b4c28@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aca01415e0 ]
This quirk signifies that the adapter cannot do a repeated
START, it always issues a STOP condition after transfers.
Suggested-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Bence Csókás <bence98@sch.bme.hu>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0353b4a96b ]
Recently we had an interop issue where RARP packets got suppressed with
bridge neigh suppression enabled, but the check in the code was meant to
suppress GARP. Exclude RARP packets from it which would allow some VMWare
setups to work, to quote the report:
"Those RARP packets usually get generated by vMware to notify physical
switches when vMotion occurs. vMware may use random sip/tip or just use
sip=tip=0. So the RARP packet sometimes get properly flooded by the vtep
and other times get dropped by the logic"
Reported-by: Amer Abdalamer <amer@nvidia.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a9d54b194 ]
Currently l2cap_chan_set_defaults() reset chan->conf_state to zero.
However, there is a flag CONF_NOT_COMPLETE which is set when
creating the l2cap_chan. It is suggested that the flag should be
cleared when l2cap_chan is ready, but when l2cap_chan_set_defaults()
is called, l2cap_chan is not yet ready. Therefore, we must set this
flag as the default.
Example crash call trace:
__dump_stack lib/dump_stack.c:15 [inline]
dump_stack+0xc4/0x118 lib/dump_stack.c:56
panic+0x1c6/0x38b kernel/panic.c:117
__warn+0x170/0x1b9 kernel/panic.c:471
warn_slowpath_fmt+0xc7/0xf8 kernel/panic.c:494
debug_print_object+0x175/0x193 lib/debugobjects.c:260
debug_object_assert_init+0x171/0x1bf lib/debugobjects.c:614
debug_timer_assert_init kernel/time/timer.c:629 [inline]
debug_assert_init kernel/time/timer.c:677 [inline]
del_timer+0x7c/0x179 kernel/time/timer.c:1034
try_to_grab_pending+0x81/0x2e5 kernel/workqueue.c:1230
cancel_delayed_work+0x7c/0x1c4 kernel/workqueue.c:2929
l2cap_clear_timer+0x1e/0x41 include/net/bluetooth/l2cap.h:834
l2cap_chan_del+0x2d8/0x37e net/bluetooth/l2cap_core.c:640
l2cap_chan_close+0x532/0x5d8 net/bluetooth/l2cap_core.c:756
l2cap_sock_shutdown+0x806/0x969 net/bluetooth/l2cap_sock.c:1174
l2cap_sock_release+0x64/0x14d net/bluetooth/l2cap_sock.c:1217
__sock_release+0xda/0x217 net/socket.c:580
sock_close+0x1b/0x1f net/socket.c:1039
__fput+0x322/0x55c fs/file_table.c:208
____fput+0x17/0x19 fs/file_table.c:244
task_work_run+0x19b/0x1d3 kernel/task_work.c:115
exit_task_work include/linux/task_work.h:21 [inline]
do_exit+0xe4c/0x204a kernel/exit.c:766
do_group_exit+0x291/0x291 kernel/exit.c:891
get_signal+0x749/0x1093 kernel/signal.c:2396
do_signal+0xa5/0xcdb arch/x86/kernel/signal.c:737
exit_to_usermode_loop arch/x86/entry/common.c:243 [inline]
prepare_exit_to_usermode+0xed/0x235 arch/x86/entry/common.c:277
syscall_return_slowpath+0x3a7/0x3b3 arch/x86/entry/common.c:348
int_ret_from_sys_call+0x25/0xa3
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reported-by: syzbot+338f014a98367a08a114@syzkaller.appspotmail.com
Reviewed-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e127906b68 ]
Commit eaf4fac478 ("net: stmmac: Do not accept invalid MTU values")
started using the TX FIFO size to verify what counts as a valid MTU
request for the stmmac driver. This is unset for the ipq806x variant.
Looking at older patches for this it seems the RX + TXs buffers can be
up to 8k, so set appropriately.
(I sent this as an RFC patch in June last year, but received no replies.
I've been running with this on my hardware (a MikroTik RB3011) since
then with larger MTUs to support both the internal qca8k switch and
VLANs with no problems. Without the patch it's impossible to set the
larger MTU required to support this.)
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
