Pull execve updates from Kees Cook:
"Most are small refactorings and bug fixes, but three things stand out:
switching timens (which got reverted before) looks solid now,
FOLL_FORCE has been removed (no failures seen yet across several weeks
in -next), and some whitespace cleanups (which are long overdue).
- Add timens support (when switching mm). This version has survived
in -next for the entire cycle (Andrei Vagin)
- Various small bug fixes, refactoring, and readability improvements
(Bernd Edlinger, Rolf Eike Beer, Bo Liu, Li Zetao Liu Shixin)
- Remove FOLL_FORCE for stack setup (Kees Cook)
- Whitespace cleanups (Rolf Eike Beer, Kees Cook)"
* tag 'execve-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt_misc: fix shift-out-of-bounds in check_special_flags
binfmt: Fix error return code in load_elf_fdpic_binary()
exec: Remove FOLL_FORCE for stack setup
binfmt_elf: replace IS_ERR() with IS_ERR_VALUE()
binfmt_elf: simplify error handling in load_elf_phdrs()
binfmt_elf: fix documented return value for load_elf_phdrs()
exec: simplify initial stack size expansion
binfmt: Fix whitespace issues
exec: Add comments on check_unsafe_exec() fs counting
ELF uapi: add spaces before '{'
selftests/timens: add a test for vfork+exit
fs/exec: switch timens when a task gets a new mm
Pull seccomp updates from Kees Cook:
- Add missing kerndoc parameter (Randy Dunlap)
- Improve seccomp selftest to check CAP_SYS_ADMIN (Gautam Menghani)
- Fix allocation leak when cloned thread immediately dies (Kuniyuki
Iwashima)
* tag 'seccomp-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
seccomp: document the "filter_count" field
seccomp: Move copy_seccomp() to no failure path.
selftests/seccomp: Check CAP_SYS_ADMIN capability in the test mode_filter_without_nnp
Pull pstore updates from Kees Cook:
"A small collection of bug fixes, refactorings, and general
improvements:
- Reporting improvements and return path fixes (Guilherme G. Piccoli,
Wang Yufen, Kees Cook)
- Clean up kmsg_bytes module parameter usage (Guilherme G. Piccoli)
- Add Guilherme to pstore MAINTAINERS entry
- Choose friendlier allocation flags (Qiujun Huang, Stephen Boyd)"
* tag 'pstore-v6.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore: Avoid kcore oops by vmap()ing with VM_IOREMAP
pstore/ram: Fix error return code in ramoops_probe()
pstore: Alert on backend write error
MAINTAINERS: Update pstore maintainers
pstore/ram: Set freed addresses to NULL
pstore/ram: Move internal definitions out of kernel-wide include
pstore/ram: Move pmsg init earlier
pstore/ram: Consolidate kfree() paths
efi: pstore: Follow convention for the efi-pstore backend name
pstore: Inform unregistered backend names as well
pstore: Expose kmsg_bytes as a module parameter
pstore: Improve error reporting in case of backend overlap
pstore/zone: Use GFP_ATOMIC to allocate zone buffer
Pull unsigned-char conversion from Jason Donenfeld:
"Enable -funsigned-char and fix code affected by that flag.
During the 6.1 cycle, several patches already made it into the tree,
which were for code that was already broken on at least one
architecture, where the naked char had a different sign than the code
author anticipated, or were part of some bug fix for an existing bug
that this initiative unearthed.
These 6.1-era fixes are:
648060902a ("MIPS: pic32: treat port as signed integer")
5c26159c97 ("ipvs: use explicitly signed chars")
e6cb876945 ("wifi: airo: do not assign -1 to unsigned char")
937ec9f7d5 ("staging: rtl8192e: remove bogus ssid character sign test")
6770473832 ("misc: sgi-gru: use explicitly signed char")
50895a55bc ("ALSA: rme9652: use explicitly signed char")
ee03c0f200 ("ALSA: au88x0: use explicitly signed char")
835bed1b83 ("fbdev: sisfb: use explicitly signed char")
50f19697dd ("parisc: Use signed char for hardware path in pdc.h")
66063033f7 ("wifi: rt2x00: use explicitly signed or unsigned types")
Regarding patches in this pull:
- There is one patch in this pull that should have made it to you
during 6.1 ("media: stv0288: use explicitly signed char"), but the
maintainer was MIA during the cycle, so it's in here instead.
- Two patches fix single architecture code affected by unsigned char
("perf/x86: Make struct p4_event_bind::cntr signed array" and
"sparc: sbus: treat CPU index as integer"), while one patch fixes
an unused typedef, in case it's ever used in the future ("media:
atomisp: make hive_int8 explictly signed").
- Finally, there's the change to actually enable -funsigned-char
("kbuild: treat char as always unsigned") and then the removal of
some no longer useful !__CHAR_UNSIGNED__ selftest code ("lib:
assume char is unsigned").
The various fixes were found with a combination of diffing objdump
output, a large variety of Coccinelle scripts, and plain old grep. In
the end, things didn't seem as bad as I feared they would. But of
course, it's also possible I missed things.
However, this has been in linux-next for basically an entire cycle
now, so I'm not overly worried. I've also been daily driving this on
my laptop for all of 6.1. Still, this series, and the ones sent for
6.1 don't total in quantity to what I thought it'd be, so I will be on
the lookout for breakage.
We could receive a few reports that are quickly fixable. Hopefully we
won't receive a barrage of reports that would result in a revert. And
just maybe we won't receive any reports at all and nobody will even
notice. Knock on wood"
* tag 'unsigned-char-6.2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/zx2c4/linux:
lib: assume char is unsigned
kbuild: treat char as always unsigned
media: atomisp: make hive_int8 explictly signed
media: stv0288: use explicitly signed char
sparc: sbus: treat CPU index as integer
perf/x86: Make struct p4_event_bind::cntr signed array
Pull nolibc updates from Paul McKenney:
- Further improvements to nolibc testing
* tag 'nolibc.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
selftests/nolibc: Always rebuild the sysroot when running a test
selftests/nolibc: Add 7 tests for memcmp()
Pull KCSAN updates from Paul McKenney:
- Add instrumentation for memcpy(), memset(), and memmove() for Clang
v16+'s new function names that are used when the -fsanitize=thread
argument is given
- Fix objtool warnings from KCSAN's volatile instrumentation, and typos
in a pair of Kconfig options' help clauses
* tag 'kcsan.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
kcsan: Fix trivial typo in Kconfig help comments
objtool, kcsan: Add volatile read/write instrumentation to whitelist
kcsan: Instrument memcpy/memset/memmove with newer Clang
Pull kernel memory model documentation updates from Paul McKenney:
- Update the LKMM documentation, both in English and in Korean
* tag 'lkmm.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
docs/memory-barriers.txt/kokr: Fix confusing name of 'data dependency barrier'
docs/memory-barriers.txt/kokr: Add memory barrier dma_mb()
docs/memory-barriers.txt/kokr: introduce io_stop_wc() and add implementation for ARM64
docs/memory-barriers.txt: Add a missed closing parenthesis
tools/memory-model: Weaken ctrl dependency definition in explanation.txt
Merge one more Intel thermal control change for 6.2-rc1:
- Remove a pointless die_id chec from the Intel HFI thermal control
driver (Ricardo Neri).
* thermal-intel:
thermal: intel: hfi: Remove a pointless die_id check
Pull RCU updates from Paul McKenney:
- Documentation updates. This is the second in a series from an ongoing
review of the RCU documentation.
- Miscellaneous fixes.
- Introduce a default-off Kconfig option that depends on RCU_NOCB_CPU
that, on CPUs mentioned in the nohz_full or rcu_nocbs boot-argument
CPU lists, causes call_rcu() to introduce delays.
These delays result in significant power savings on nearly idle
Android and ChromeOS systems. These savings range from a few percent
to more than ten percent.
This series also includes several commits that change call_rcu() to a
new call_rcu_hurry() function that avoids these delays in a few
cases, for example, where timely wakeups are required. Several of
these are outside of RCU and thus have acks and reviews from the
relevant maintainers.
- Create an srcu_read_lock_nmisafe() and an srcu_read_unlock_nmisafe()
for architectures that support NMIs, but which do not provide
NMI-safe this_cpu_inc(). These NMI-safe SRCU functions are required
by the upcoming lockless printk() work by John Ogness et al.
- Changes providing minor but important increases in torture test
coverage for the new RCU polled-grace-period APIs.
- Changes to torturescript that avoid redundant kernel builds, thus
providing about a 30% speedup for the torture.sh acceptance test.
* tag 'rcu.2022.12.02a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (49 commits)
net: devinet: Reduce refcount before grace period
net: Use call_rcu_hurry() for dst_release()
workqueue: Make queue_rcu_work() use call_rcu_hurry()
percpu-refcount: Use call_rcu_hurry() for atomic switch
scsi/scsi_error: Use call_rcu_hurry() instead of call_rcu()
rcu/rcutorture: Use call_rcu_hurry() where needed
rcu/rcuscale: Use call_rcu_hurry() for async reader test
rcu/sync: Use call_rcu_hurry() instead of call_rcu
rcuscale: Add laziness and kfree tests
rcu: Shrinker for lazy rcu
rcu: Refactor code a bit in rcu_nocb_do_flush_bypass()
rcu: Make call_rcu() lazy to save power
rcu: Implement lockdep_rcu_enabled for !CONFIG_DEBUG_LOCK_ALLOC
srcu: Debug NMI safety even on archs that don't require it
srcu: Explain the reason behind the read side critical section on GP start
srcu: Warn when NMI-unsafe API is used in NMI
arch/s390: Add ARCH_HAS_NMI_SAFE_THIS_CPU_OPS Kconfig option
arch/loongarch: Add ARCH_HAS_NMI_SAFE_THIS_CPU_OPS Kconfig option
rcu: Fix __this_cpu_read() lockdep warning in rcu_force_quiescent_state()
rcu-tasks: Make grace-period-age message human-readable
...
In MT8195 SOF design, both DSP and audio driver would access audio
registers. Before DSP accesses audio registers, audio power and clock
should be enabled. DSP will hang up if DSP access audio register but
audio power and clock are disabled. Therefore, we add audio pm runtime
active checking before accessing audio registers in SOF BE's callback
hw_params function to avoid this situation.
Signed-off-by: YC Hung <yc.hung@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20221209031053.8444-1-yc.hung@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge devfreq updates and cpupower utility updates for 6.2-rc1:
- Add a private governor_data for devfreq governors (Kant Fan).
- Reorganize devfreq code to use device_match_of_node() and
devm_platform_get_and_ioremap_resource() instead of open coding
them (ye xingchen, Minghao Chi).
- Make cpupower choose base_cpu to display default cpupower details
instead of picking CPU 0 (Saket Kumar Bhaskar).
- Add Georgian translation to cpupower documentation (Zurab
Kargareteli).
- Introduce powercap intel-rapl library, powercap-info command, and
RAPL monitor into cpupower (Thomas Renninger).
* pm-devfreq:
PM / devfreq: event: use devm_platform_get_and_ioremap_resource()
PM / devfreq: event: Use device_match_of_node()
PM / devfreq: Use device_match_of_node()
PM/devfreq: governor: Add a private governor_data for governor
* pm-tools:
cpupower: rapl monitor - shows the used power consumption in uj for each rapl domain
cpupower: Introduce powercap intel-rapl library and powercap-info command
cpupower: Add Georgian translation
tools/cpupower: Choose base_cpu to display default cpupower details
Merge power capping code updates, x86-specific power management pdate,
operating performance points library updates and miscellaneous power
management updates for 6.2-rc1:
- Fix compiler warnings with make W=1 in the idle_inject power capping
driver (Srinivas Pandruvada).
- Use kstrtobool() instead of strtobool() in the power capping sysfs
interface (Christophe JAILLET).
- Add SCMI Powercap based power capping driver (Cristian Marussi).
- Add Emerald Rapids support to the intel-uncore-freq driver (Artem
Bityutskiy).
- Repair slips in kernel-doc comments in the generic notifier code
(Lukas Bulwahn).
- Fix several DT issues in the OPP library reorganize code around
opp-microvolt-<named> DT property (Viresh Kumar).
- Allow any of opp-microvolt, opp-microamp, or opp-microwatt properties
to be present without the others present (James Calligeros).
- Fix clock-latency-ns property in DT example (Serge Semin).
* powercap:
powercap: idle_inject: Fix warnings with make W=1
powercap: Use kstrtobool() instead of strtobool()
powercap: arm_scmi: Add SCMI Powercap based driver
* pm-x86:
platform/x86: intel-uncore-freq: add Emerald Rapids support
* pm-opp:
dt-bindings: opp-v2: Fix clock-latency-ns prop in example
OPP: decouple dt properties in opp_parse_supplies()
OPP: Simplify opp_parse_supplies() by restructuring it
OPP: Parse named opp-microwatt property too
dt-bindings: opp: Fix named microwatt property
dt-bindings: opp: Fix usage of current in microwatt property
* pm-misc:
notifier: repair slips in kernel-doc comments
Merge cpuidle changes, updates related to system sleep amd generic power
domains code fixes for 6.2-rc1:
- Improve kernel messages printed by the cpuidle PCI driver (Ulf
Hansson).
- Make the DT cpuidle driver return the correct number of parsed idle
states, clean it up and clarify a comment in it (Ulf Hansson).
- Modify the tasks freezing code to avoid using pr_cont() and refine an
error message printed by it (Rafael Wysocki).
- Make the hibernation core code complain about memory map mismatches
during resume to help diagnostics (Xueqin Luo).
- Fix mistake in a kerneldoc comment in the hibernation code (xiongxin).
- Reverse the order of performance and enabling operations in the
generic power domains code (Abel Vesa).
- Power off[on] domains in hibernate .freeze[thaw]_noirq hook of in the
generic power domains code (Abel Vesa).
- Consolidate genpd_restore_noirq() and genpd_resume_noirq() (Shawn
Guo).
- Pass generic PM noirq hooks to genpd_finish_suspend() (Shawn Guo).
- Drop generic power domain status manipulation during hibernate
restore (Shawn Guo).
* pm-cpuidle:
cpuidle: dt: Clarify a comment and simplify code in dt_init_idle_driver()
cpuidle: dt: Return the correct numbers of parsed idle states
cpuidle: psci: Extend information in log about OSI/PC mode
* pm-sleep:
PM: sleep: Refine error message in try_to_freeze_tasks()
PM: sleep: Avoid using pr_cont() in the tasks freezing code
PM: hibernate: Complain about memory map mismatches during resume
PM: hibernate: Fix mistake in kerneldoc comment
* pm-domains:
PM: domains: Reverse the order of performance and enabling ops
PM: domains: Power off[on] domain in hibernate .freeze[thaw]_noirq hook
PM: domains: Consolidate genpd_restore_noirq() and genpd_resume_noirq()
PM: domains: Pass generic PM noirq hooks to genpd_finish_suspend()
PM: domains: Drop genpd status manipulation for hibernate restore
Merge cpufreq changes for 6.2-rc1:
- Generalize of_perf_domain_get_sharing_cpumask phandle format (Hector
Martin).
- Add new cpufreq driver for Apple SoC CPU P-states (Hector Martin).
- Update Qualcomm cpufreq driver, including:
* CPU clock provider support,
* Generic cleanups or reorganization.
* Potential memleak fix.
* Fix of the return value of cpufreq_driver->get().
(Manivannan Sadhasivam, Chen Hui).
- Update Qualcomm cpufreq driver's DT bindings, including:
* Support for CPU clock provider.
* Missing cache-related properties fixes.
* Support for QDU1000/QRU1000.
(Manivannan Sadhasivam, Rob Herring, Melody Olvera).
- Add support for ti,am625 SoC and enable build of ti-cpufreq for
ARCH_K3 (Dave Gerlach, and Vibhore Vardhan).
- Use flexible array to simplify memory allocation in the tegra186
cpufreq driver (Christophe JAILLET).
- Convert cpufreq statistics code to use sysfs_emit_at() (ye xingchen).
- Allow intel_pstate to use no-HWP mode on Sapphire Rapids (Giovanni
Gherdovich).
- Add missing pci_dev_put() to the amd_freq_sensitivity cpufreq driver
(Xiongfeng Wang).
- Initialize the kobj_unregister completion before calling
kobject_init_and_add() in the cpufreq core code (Yongqiang Liu).
- Defer setting boost MSRs in the ACPI cpufreq driver (Stuart Hayes,
Nathan Chancellor).
- Make intel_pstate accept initial EPP value of 0x80 (Srinivas
Pandruvada).
- Make read-only array sys_clk_src in the SPEAr cpufreq driver static
(Colin Ian King).
- Make array speeds in the longhaul cpufreq driver static (Colin Ian
King).
- Use str_enabled_disabled() helper in the ACPI cpufreq driver (Andy
Shevchenko).
- Drop a reference to CVS from cpufreq documentation (Conghui Wang).
* pm-cpufreq: (30 commits)
cpufreq: Remove CVS version control contents from documentation
cpufreq: stats: Convert to use sysfs_emit_at() API
cpufreq: ACPI: Only set boost MSRs on supported CPUs
dt-bindings: cpufreq: cpufreq-qcom-hw: Add QDU1000/QRU1000 cpufreq
cpufreq: tegra186: Use flexible array to simplify memory allocation
cpufreq: intel_pstate: Add Sapphire Rapids support in no-HWP mode
cpufreq: amd_freq_sensitivity: Add missing pci_dev_put()
cpufreq: Init completion before kobject_init_and_add()
cpufreq: apple-soc: Add new driver to control Apple SoC CPU P-states
cpufreq: qcom-hw: Add CPU clock provider support
dt-bindings: cpufreq: cpufreq-qcom-hw: Add cpufreq clock provider
cpufreq: qcom-hw: Fix the frequency returned by cpufreq_driver->get()
cpufreq: ACPI: Remove unused variables 'acpi_cpufreq_online' and 'ret'
cpufreq: qcom-hw: Fix memory leak in qcom_cpufreq_hw_read_lut()
arm64: dts: ti: k3-am625-sk: Add 1.4GHz OPP
cpufreq: ti: Enable ti-cpufreq for ARCH_K3
arm64: dts: ti: k3-am625: Introduce operating-points table
cpufreq: dt-platdev: Blacklist ti,am625 SoC
cpufreq: ti-cpufreq: Add support for AM625
dt-bindings: cpufreq: qcom: Add missing cache related properties
...
Combine all queued EDAC changes for submission into v6.2:
* ras/edac-ghes:
EDAC/igen6: Return the correct error type when not the MC owner
apei/ghes: Use xchg_release() for updating new cache slot instead of cmpxchg()
EDAC: Check for GHES preference in the chipset-specific EDAC drivers
EDAC/ghes: Make ghes_edac a proper module
EDAC/ghes: Prepare to make ghes_edac a proper module
EDAC/ghes: Add a notifier for reporting memory errors
efi/cper: Export several helpers for ghes_edac to use
* ras/edac-misc:
EDAC/i10nm: fix refcount leak in pci_get_dev_wrapper()
EDAC/i5400: Fix typo in comment: vaious -> various
EDAC/mc_sysfs: Increase legacy channel support to 12
MAINTAINERS: Make Mauro EDAC reviewer
MAINTAINERS: Make Manivannan Sadhasivam the maintainer of qcom_edac
EDAC/i5000: Mark as BROKEN
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Merge ACPI fan driver fixes, ACPI PCC driver fixes, miscellaneous ACPI
cleanups and PNP updates for 6.2-rc1:
- Make the ACPI fan driver use sysfs_emit_at() in its sysfs interface
code (ye xingchen).
- Fix the _FIF package extraction failure handling in the ACPI fan
driver (Hanjun Guo).
- Fix the PCC mailbox handling error code path (Huisong Li).
- Avoid using PCC Opregions if there is no platform interrupt allocated
for this purpose (Huisong Li).
- Use sysfs_emit() instead of scnprintf() in the ACPI PAD driver and
CPPC library (ye xingchen).
- Fix some kernel-doc issues in the ACPI GSI processing code (Xiongfeng
Wang).
- Fix name memory leak in pnp_alloc_dev() (Yang Yingliang).
- Do not disable PNP devices on suspend when they cannot be re-enabled
on resume (Hans de Goede).
* acpi-fan:
ACPI: fan: Convert to use sysfs_emit_at() API
ACPI: fan: Bail out if extract package failed
* acpi-pcc:
mailbox: pcc: Reset pcc_chan_count to zero in case of PCC probe failure
ACPI: PCC: Setup PCC Opregion handler only if platform interrupt is available
* acpi-misc:
ACPI: use sysfs_emit() instead of scnprintf()
ACPI: irq: Fix some kernel-doc issues
* pnp:
PNP: Do not disable devices on suspend when they cannot be re-enabled on resume
PNP: fix name memory leak in pnp_alloc_dev()
Make ACPI APEI updates, x86-specific ACPI updates, ACPI battery driver
fix and ACPI PFRU/T driver fixes for 6.2-rc1:
- Drop unsetting ACPI APEI driver data on remove (Uwe Kleine-König).
- Use xchg_release() instead of cmpxchg() for updating new GHES cache
slots (Ard Biesheuvel).
- Clean up the ACPI APEI code (Sudeep Holla, Christophe JAILLET, Jay Lu).
- Add new I2C device enumeration quirks for Medion Lifetab S10346 and
Lenovo Yoga Tab 3 Pro (YT3-X90F) (Hans de Goede).
- Make the ACPI battery driver notify user space about adding new
battery hooks and removing the existing ones (Armin Wolf).
- Modify the pfr_update and pfr_telemetry drivers to use ACPI_FREE()
for freeing acpi_object structures to help diagnostics (Wang ShaoBo).
* acpi-apei:
ACPI: APEI: EINJ: Refactor available_error_type_show()
ACPI: APEI: EINJ: Fix formatting errors
ACPI: APEI: Remove a useless include
ACPI: APEI: Silence missing prototype warnings
apei/ghes: Use xchg_release() for updating new cache slot instead of cmpxchg()
ACPI: APEI: Drop unsetting driver data on remove
* acpi-x86:
ACPI: x86: Add skip i2c clients quirk for Medion Lifetab S10346
ACPI: x86: Add skip i2c clients quirk for Lenovo Yoga Tab 3 Pro (YT3-X90F)
* acpi-battery:
ACPI: battery: Call power_supply_changed() when adding hooks
* acpi-pfrut:
ACPI: pfr_update: use ACPI_FREE() to free acpi_object
ACPI: pfr_telemetry: use ACPI_FREE() to free acpi_object
Make ACPI power management changes, ACPI processor driver updates, ACPI
EC driver quirk and ACPI backlight driver updates for 6.2-rc1:
- Print full name paths of ACPI power resources objects during
enumeration (Kane Chen).
- Eliminate a compiler warning regarding a missing function prototype
in the ACPI power management code (Sudeep Holla).
- Fix and clean up the ACPI processor driver (Rafael Wysocki, Li Zhong,
Colin Ian King, Sudeep Holla).
- Add quirk for the HP Pavilion Gaming 15-cx0041ur to the ACPI EC
driver (Mia Kanashi).
- Add some mew ACPI backlight handling quirks and update some existing
ones (Hans de Goede).
- Make the ACPI backlight driver prefer the native backlight control
over vendor backlight control when possible (Hans de Goede).
* acpi-pm:
ACPI: PM: Silence missing prototype warning
ACPI: PM: Print full name path while adding power resource
* acpi-processor:
ACPI: processor: perflib: Adjust acpi_processor_notify_smm() return value
ACPI: processor: perflib: Rearrange acpi_processor_notify_smm()
ACPI: processor: perflib: Rearrange unregistration routine
ACPI: processor: perflib: Drop redundant parentheses
ACPI: processor: perflib: Adjust white space
ACPI: processor: idle: Drop unnecessary statements and parens
ACPI: processor: Silence missing prototype warnings
ACPI: processor_idle: Silence missing prototype warnings
ACPI: processor: throttling: remove variable count
ACPI: processor: idle: Check acpi_fetch_acpi_dev() return value
* acpi-ec:
ACPI: EC: Add quirk for the HP Pavilion Gaming 15-cx0041ur
* acpi-video:
ACPI: video: Prefer native over vendor
ACPI: video: Simplify __acpi_video_get_backlight_type()
ACPI: video: Add force_native quirk for Sony Vaio VPCY11S1E
ACPI: video: Add force_vendor quirk for Sony Vaio PCG-FRV35
ACPI: video: Change Sony Vaio VPCEH3U1E quirk to force_native
ACPI: video: Change GIGABYTE GB-BXBT-2807 quirk to force_none
ACPI: video: Add a few bugtracker links to DMI quirks
Merge ACPI changes related to device enumeration, device object
managenet, operation region handling, table parsing and sysfs
interface:
- Use ZERO_PAGE(0) instead of empty_zero_page in the ACPI device
enumeration code (Giulio Benetti).
- Change the return type of the ACPI driver remove callback to void and
update its users accordingly (Dawei Li).
- Add general support for FFH address space type and implement the low-
level part of it for ARM64 (Sudeep Holla).
- Fix stale comments in the ACPI tables parsing code and make it print
more messages related to MADT (Hanjun Guo, Huacai Chen).
- Replace invocations of generic library functions with more kernel-
specific counterparts in the ACPI sysfs interface (Christophe JAILLET,
Xu Panda).
* acpi-scan:
ACPI: scan: substitute empty_zero_page with helper ZERO_PAGE(0)
* acpi-bus:
ACPI: FFH: Silence missing prototype warnings
ACPI: make remove callback of ACPI driver void
ACPI: bus: Fix the _OSC capability check for FFH OpRegion
arm64: Add architecture specific ACPI FFH Opregion callbacks
ACPI: Implement a generic FFH Opregion handler
* acpi-tables:
ACPI: tables: Fix the stale comments for acpi_locate_initial_tables()
ACPI: tables: Print CORE_PIC information when MADT is parsed
* acpi-sysfs:
ACPI: sysfs: use sysfs_emit() to instead of scnprintf()
ACPI: sysfs: Use kstrtobool() instead of strtobool()
Merge ACPICA changes, including bug fixes and cleanups as well as support
for some recently defined data structures, for 6.2-rc1:
- Make acpi_ex_load_op() match upstream implementation (Rafael Wysocki).
- Add support for loong_arch-specific APICs in MADT (Huacai Chen).
- Add support for fixed PCIe wake event (Huacai Chen).
- Add EBDA pointer sanity checks (Vit Kabele).
- Avoid accessing VGA memory when EBDA < 1KiB (Vit Kabele).
- Add CCEL table support to both compiler/disassembler (Kuppuswamy
Sathyanarayanan).
- Add a couple of new UUIDs to the known UUID list (Bob Moore).
- Add support for FFH Opregion special context data (Sudeep Holla).
- Improve warning message for "invalid ACPI name" (Bob Moore).
- Add support for CXL 3.0 structures (CXIMS & RDPAS) in the CEDT table
(Alison Schofield).
- Prepare IORT support for revision E.e (Robin Murphy).
- Finish support for the CDAT table (Bob Moore).
- Fix error code path in acpi_ds_call_control_method() (Rafael Wysocki).
- Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage() (Li Zetao).
- Update the version of the ACPICA code in the kernel (Bob Moore).
* acpica:
ACPICA: Fix use-after-free in acpi_ut_copy_ipackage_to_ipackage()
ACPICA: Fix error code path in acpi_ds_call_control_method()
ACPICA: Update version to 20221020
ACPICA: Add utcksum.o to the acpidump Makefile
Revert "LoongArch: Provisionally add ACPICA data structures"
ACPICA: Finish support for the CDAT table
ACPICA: IORT: Update for revision E.e
ACPICA: Add CXL 3.0 structures (CXIMS & RDPAS) to the CEDT table
ACPICA: Improve warning message for "invalid ACPI name"
ACPICA: Add support for FFH Opregion special context data
ACPICA: Add a couple of new UUIDs to the known UUID list
ACPICA: iASL: Add CCEL table to both compiler/disassembler
ACPICA: Do not touch VGA memory when EBDA < 1ki_b
ACPICA: Check that EBDA pointer is in valid memory
ACPICA: Events: Support fixed PCIe wake event
ACPICA: MADT: Add loong_arch-specific APICs support
ACPICA: Make acpi_ex_load_op() match upstream
Marc Kleine-Budde says:
====================
linux-can-next-for-6.2-20221212
this is a pull request of 39 patches for net-next/master.
The first 2 patches are by me fix a warning and coding style in the
kvaser_usb driver.
Vivek Yadav's patch sorts the includes of the m_can driver.
Biju Das contributes 5 patches for the rcar_canfd driver improve the
support for different IP core variants.
Jean Delvare's patch for the ctucanfd drops the dependency on
COMPILE_TEST.
Vincent Mailhol's patch sorts the includes of the etas_es58x driver.
Haibo Chen's contributes 2 patches that add i.MX93 support to the
flexcan driver.
Lad Prabhakar's patch updates the dt-bindings documentation of the
rcar_canfd driver.
Minghao Chi's patch converts the c_can platform driver to
devm_platform_get_and_ioremap_resource().
In the next 7 patches Vincent Mailhol adds devlink support to the
etas_es58x driver to report firmware, bootloader and hardware version.
Xu Panda's patch converts a strncpy() -> strscpy() in the ucan driver.
Ye Bin's patch removes a useless parameter from the AF_CAN protocol.
The next 2 patches by Vincent Mailhol and remove unneeded or unused
pointers to struct usb_interface in device's priv struct in the ucan
and gs_usb driver.
Vivek Yadav's patch cleans up the usage of the RAM initialization in
the m_can driver.
A patch by me add support for SO_MARK to the AF_CAN protocol.
Geert Uytterhoeven's patch fixes the number of CAN channels in the
rcan_canfd bindings documentation.
In the last 11 patches Markus Schneider-Pargmann optimizes the
register access in the t_can driver and cleans up the tcan glue
driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
TCAN4X5X_ERROR_STATUS is not a status register that needs clearing
during interrupt handling. Instead this is a masking register that masks
error interrupts. Writing TCAN4X5X_CLEAR_ALL_INT to this register
effectively masks everything.
Rename the register and mask all error interrupts only once by writing
to the register in tcan4x5x_init.
Fixes: 5443c226ba ("can: tcan4x5x: Add tcan4x5x driver to the kernel")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20221206115728.1056014-10-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Register 0x824 TCAN4X5X_MCAN_INT_REG is a read-only register. Any writes
to this register do not have any effect.
Remove this write. The m_can driver aldready clears the interrupts in
m_can_isr() by writing to M_CAN_IR which is translated to register
0x1050 which is a writable version of this register.
Fixes: 5443c226ba ("can: tcan4x5x: Add tcan4x5x driver to the kernel")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20221206115728.1056014-9-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
For peripheral devices the m_can_rx_handler is called directly after
setting cdev->irqstatus. This means we don't have to read the irqstatus
again in m_can_rx_handler. Avoid this by adding a parameter that is
false for direct calls.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20221206115728.1056014-3-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The TXFQS register is read first to check if the fifo is full and then
immediately again to get the putidx. This is unnecessary and adds
significant overhead if read requests are done over a slow bus, for
example SPI with tcan4x5x.
Add a variable to store the value of the register. Split the
m_can_tx_fifo_full function into two to avoid the hidden m_can_read call
if not needed.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20221206115728.1056014-2-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
According to the bindings, only two channels are supported.
However, R-Car V3U supports eight, leading to "make dtbs" failures:
arch/arm64/boot/dts/renesas/r8a779a0-falcon.dtb: can@e6660000: Unevaluated properties are not allowed ('channel2', 'channel3', 'channel4', 'channel5', 'channel6', 'channel7' were unexpected)
Update the number of channels to 8 on R-Car V3U.
While at it, prevent adding more properties to the channel nodes, as
they must contain no other properties than a status property.
Fixes: d6254d52d7 ("dt-bindings: can: renesas,rcar-canfd: Document r8a779a0 support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/all/7d41d72cd7db2e90bae069ce57dbb672f17500ae.1670431681.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When we try to access the mcan message ram addresses during the probe,
hclk is gated by any other drivers or disabled, because of that probe
gets failed.
Move the mram init functionality to mcan chip config called by
m_can_start from mcan open function, by that time clocks are
enabled.
Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Vivek Yadav <vivek.2311@samsung.com>
Link: https://lore.kernel.org/all/20221207100632.96200-2-vivek.2311@samsung.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Vincent Mailhol <mailhol.vincent@wanadoo.fr> says:
The gs_can and ucan drivers keep a pointer to struct usb_interface in
their private structure. This is not needed. For gs_can the only use
is to retrieve struct usb_device, which is already available in
gs_usb::udev. For ucan, the field is set but never used.
Remove the struct usb_interface fields and clean up.
Link: https://lore.kernel.org/all/20221208081142.16936-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
