In phylink_parse_fixedlink() the pl->link_config.advertising bits are AND
with pl->supported, pl->supported is zeroed and only the speed/duplex
modes and MII bits are set.
So pl->link_config.advertising always loses the flow control/pause bits.
By setting Pause and Asym_Pause bits in pl->supported, the flow control
work again when devicetree "pause" is set in fixes-link node and the MAC
advertise that is supports pause.
Results with this patch.
Legend:
- DT = 'Pause' is set in the fixed-link in devicetree.
- validate() = ‘Yes’ means phylink_set(mask, Pause) is set in the
validate().
- flow = results reported my link is Up line.
+-----+------------+-------+
| DT | validate() | flow |
+-----+------------+-------+
| Yes | Yes | rx/tx |
| No | Yes | off |
| Yes | No | off |
+-----+------------+-------+
Fixes: 9525ae8395 ("phylink: add phylink infrastructure")
Signed-off-by: René van Dorst <opensource@vdorst.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Dutch consumer grade ISDN network will be shut down on September 1,
2019. This means I'll be converted to some sort of VOIP shortly. At that
point it would be unwise to try to maintain the gigaset driver, even for
odd fixes as I do. So I'll stop maintaining it as a seperate driver and
bump support to CAPI in staging. De facto this means the driver will be
unmaintained, since no-one seems to be working on CAPI.
I've lighty tested the hardware specific modules of this driver (bas-gigaset,
ser-gigaset, and usb-gigaset) for v5.3-rc1. The basic functionality appears to
be working. It's unclear whether anyone still cares. I'm aware of only one
person sort of using the driver a few years ago.
Thanks to Karsten Keil for the ISDN subsystems gigaset was using (I4L and
CAPI). And many thanks to Hansjoerg Lipp and Tilman Schmidt for writing and
upstreaming this driver.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
In rds_rdma_cm_event_handler_cmn(), there are some if statements to
check whether conn is NULL, such as on lines 65, 96 and 112.
But conn is not checked before being used on line 108:
trans->cm_connect_complete(conn, event);
and on lines 140-143:
rdsdebug("DISCONNECT event - dropping connection "
"%pI6c->%pI6c\n", &conn->c_laddr,
&conn->c_faddr);
rds_conn_drop(conn);
Thus, possible null-pointer dereferences may occur.
To fix these bugs, conn is checked before being used.
These bugs are found by a static analysis tool STCheck written by us.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
gcc-9 complains about a blatant uninitialized variable use that
all earlier compiler versions missed:
drivers/iio/adc/rcar-gyroadc.c:510:5: warning: 'ret' may be used uninitialized in this function [-Wmaybe-uninitialized]
Return -EINVAL instead here and a few lines above it where
we accidentally return 0 on failure.
Cc: stable@vger.kernel.org
Fixes: 059c53b323 ("iio: adc: Add Renesas GyroADC driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In start_isoc_chain(), usb_alloc_urb() on line 1392 may fail
and return NULL. At this time, fifo->iso[i].urb is assigned to NULL.
Then, fifo->iso[i].urb is used at some places, such as:
LINE 1405: fill_isoc_urb(fifo->iso[i].urb, ...)
urb->number_of_packets = num_packets;
urb->transfer_flags = URB_ISO_ASAP;
urb->actual_length = 0;
urb->interval = interval;
LINE 1416: fifo->iso[i].urb->...
LINE 1419: fifo->iso[i].urb->...
Thus, possible null-pointer dereferences may occur.
To fix these bugs, "continue" is added to avoid using fifo->iso[i].urb
when it is NULL.
These bugs are found by a static analysis tool STCheck written by us.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull Wimplicit-fallthrough enablement from Gustavo A. R. Silva:
"This marks switch cases where we are expecting to fall through, and
globally enables the -Wimplicit-fallthrough option in the main
Makefile.
Finally, some missing-break fixes that have been tagged for -stable:
- drm/amdkfd: Fix missing break in switch statement
- drm/amdgpu/gfx10: Fix missing break in switch statement
With these changes, we completely get rid of all the fall-through
warnings in the kernel"
* tag 'Wimplicit-fallthrough-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
Makefile: Globally enable fall-through warning
drm/i915: Mark expected switch fall-throughs
drm/amd/display: Mark expected switch fall-throughs
drm/amdkfd/kfd_mqd_manager_v10: Avoid fall-through warning
drm/amdgpu/gfx10: Fix missing break in switch statement
drm/amdkfd: Fix missing break in switch statement
perf/x86/intel: Mark expected switch fall-throughs
mtd: onenand_base: Mark expected switch fall-through
afs: fsclient: Mark expected switch fall-throughs
afs: yfsclient: Mark expected switch fall-throughs
can: mark expected switch fall-throughs
firewire: mark expected switch fall-throughs
Pull s390 updates from Heiko Carstens:
- Add ABI to kernel image file which allows e.g. the file utility to
figure out the kernel version.
- Wire up clone3 system call.
- Add support for kasan bitops instrumentation.
- uapi header cleanup: use __u{16,32,64} instead of uint{16,32,64}_t.
- Provide proper ARCH_ZONE_DMA_BITS so the s390 DMA zone is correctly
defined with 2 GB instead of the default value of 1 MB.
- Farhan Ali leaves the group of vfio-ccw maintainers.
- Various small vfio-ccw fixes.
- Add missing locking for airq_areas array in virtio code.
- Minor qdio improvements.
* tag 's390-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
MAINTAINERS: vfio-ccw: Remove myself as the maintainer
s390/mm: use shared variables for sysctl range check
virtio/s390: fix race on airq_areas[]
s390/dma: provide proper ARCH_ZONE_DMA_BITS value
s390/kasan: add bitops instrumentation
s390/bitops: make test functions return bool
s390: wire up clone3 system call
kbuild: enable arch/s390/include/uapi/asm/zcrypt.h for uapi header test
s390: use __u{16,32,64} instead of uint{16,32,64}_t in uapi header
s390/hypfs: fix a typo in the name of a function
s390/qdio: restrict QAOB usage to IQD unicast queues
s390/qdio: add sanity checks to the fast-requeue path
s390: enable detection of kernel version from bzImage
Documentation: fix vfio-ccw doc
vfio-ccw: Update documentation for csch/hsch
vfio-ccw: Don't call cp_free if we are processing a channel program
vfio-ccw: Set pa_nr to 0 if memory allocation fails for pa_iova_pfn
vfio-ccw: Fix memory leak and don't call cp_free in cp_init
vfio-ccw: Fix misleading comment when setting orb.cmd.c64
Pull Devicetree fixes from Rob Herring:
"The nvmem changes would typically go thru Greg's tree, but they were
missed in the merge window. [ Acked by Greg ]
Summary:
- Fix mismatches in $id values and actual filenames. Now checked by
tools.
- Convert nvmem binding to DT schema
- Fix a typo in of_property_read_bool() kerneldoc
- Remove some redundant description in al-fic interrupt-controller"
* tag 'devicetree-fixes-for-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: Fix more $id value mismatches filenames
dt-bindings: nvmem: SID: Fix the examples node names
dt-bindings: nvmem: Add YAML schemas for the generic NVMEM bindings
of: Fix typo in kerneldoc
dt-bindings: interrupt-controller: al-fic: remove redundant binding
dt-bindings: clk: allwinner,sun4i-a10-ccu: Correct path in $id
Pull libnvdimm fixes from Dan Williams:
"A collection of locking and async operations fixes for v5.3-rc2. These
had been soaking in a branch targeting the merge window, but missed
due to a regression hunt. This fixed up version has otherwise been in
-next this past week with no reported issues.
In order to gain confidence in the locking changes the pull also
includes a debug / instrumentation patch to enable lockdep coverage
for libnvdimm subsystem operations that depend on the device_lock for
exclusion. As mentioned in the changelog it is a hack, but it works
and documents the locking expectations of the sub-system in a way that
others can use lockdep to verify. The driver core touches got an ack
from Greg.
Summary:
- Fix duplicate device_unregister() calls (multiple threads competing
to do unregister work when scheduling device removal from a sysfs
attribute of the self-same device).
- Fix badblocks registration order bug. Ensure region badblocks are
initialized in advance of namespace registration.
- Fix a deadlock between the bus lock and probe operations.
- Export device-core infrastructure to coordinate async operations
via the device ->dead state.
- Add device-core infrastructure to validate device_lock() usage with
lockdep"
* tag 'libnvdimm-fixes-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
driver-core, libnvdimm: Let device subsystems add local lockdep coverage
libnvdimm/bus: Fix wait_nvdimm_bus_probe_idle() ABBA deadlock
libnvdimm/bus: Stop holding nvdimm_bus_list_mutex over __nd_ioctl()
libnvdimm/bus: Prepare the nd_ioctl() path to be re-entrant
libnvdimm/region: Register badblocks before namespaces
libnvdimm/bus: Prevent duplicate device_unregister() calls
drivers/base: Introduce kill_device()
There are two references to the generic counter ABI, with was added
on a separate patch. Both point to a non-existing file.
Fix them.
Fixes: ea2b23b895 ("counter: Documentation: Add Generic Counter sysfs documentation")
Fixes: 09e7d4ed89 ("docs: Add Generic Counter interface documentation")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Distribution installation images such as Debian include different sets
of modules which can be downloaded dynamically. Such images may notably
include the hda sound modules but not the i915 DRM module, even if the
latter was enabled at build time, as reported on
https://bugs.debian.org/931507
In such a case hdac_i915 would be linked in and try to load the i915
module, fail since it is not there, but still wait for a whole minute
before giving up binding with it.
This fixes such as case by only waiting for the binding if the module
was properly loaded (or module support is disabled, in which case i915
is already compiled-in anyway).
Fixes: f9b54e1961 ("ALSA: hda/i915: Allow delayed i915 audio component binding")
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is unused since commit 9f69a496f1 ("kbuild: split out *.mod out
of {single,multi}-used-m rules").
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Running gen_compile_commands.py after building the kernel with
allnoconfig gave this:
$ ./scripts/gen_compile_commands.py
WARNING: Found 449 entries. Have you compiled the kernel?
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This file is used by clangd to use language server protocol.
It can be generated at each compile using scripts/gen_compile_commands.py.
Therefore it is different depending on the environment and should be
ignored.
Signed-off-by: Toru Komatsu <k0ma@utam0k.jp>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Commit 415008af32 ("docs-rst: convert lsm from DocBook to ReST")
removed the last users of this macro.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Pull block DMA segment fix from Jens Axboe:
"Here's the virtual boundary segment size fix"
* tag 'for-linus-20190726-2' of git://git.kernel.dk/linux-block:
block: fix max segment size handling in blk_queue_virt_boundary
Pull selinux fix from Paul Moore:
"One small SELinux patch to add some proper bounds/overflow checking
when adding a new sid/secid"
* tag 'selinux-pr-20190726' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: check sidtab limit before adding a new entry
f2fs_allocate_data_block() invalidates old block address and enable new block
address. Then, if we try to read old block by f2fs_submit_page_bio(), it will
give WARN due to reading invalid blocks.
Let's make the order sanely back.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now that the examples are validated, the examples in the SID binding
generates an error since the node names aren't one of the valid ones.
Let's switch for one that is ok.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>
The nvmem providers and consumers have a bunch of generic properties that
are needed in a device tree. Add a YAML schemas for those.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
[Srini: Changed licence to (GPL-2.0 OR BSD-2-Clause)]
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
"Findfrom" is not a word. Replace the function synopsis by something
that makes sense.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2019-07-25
This series introduces some fixes to mlx5 driver.
1) Ariel is addressing an issue with enacp flow counter race condition
2) Aya fixes ethtool speed handling
3) Edward fixes modify_cq hw bits alignment
4) Maor fixes RDMA_RX capabilities handling
5) Mark reverses unregister devices order to address an issue with LAG
6) From Tariq,
- wrong max num channels indication regression
- TLS counters naming and documentation as suggested by Jakub
- kTLS, Call WARN_ONCE on netdev mismatch
There is one patch in this series that touches nfp driver to align
TLS statistics names with latest documentation, Jakub is CC'ed.
Please pull and let me know if there is any problem.
For -stable v4.9:
('net/mlx5: Use reversed order when unregister devices')
For -stable v4.20
('net/mlx5e: Prevent encap flow counter update async to user query')
('net/mlx5: Fix modify_cq_in alignment')
For -stable v5.1
('net/mlx5e: Fix matching of speed to PRM link modes')
For -stable v5.2
('net/mlx5: Add missing RDMA_RX capabilities')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull SCSI fixes from James Bottomley:
"Nine fixes: The most important core one is the dma_max_mapping_size
fix that corrects the boot problem Gunter Roeck was having. A couple
of other driver only fixes are significant, like the cxgbi selector
support addition, the alua 2 second delay and the fdomain build fix"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_dh_alua: always use a 2 second delay before retrying RTPG
scsi: ibmvfc: fix WARN_ON during event pool release
scsi: fcoe: fix a typo
scsi: megaraid_sas: Make some functions static
scsi: megaraid_sas: fix panic on loading firmware crashdump
scsi: megaraid_sas: fix spelling mistake "megarid_sas" -> "megaraid_sas"
scsi: core: fix the dma_max_mapping_size call
scsi: fdomain: fix building pcmcia front-end
scsi: target: cxgbit: add support for IEEE_8021QAZ_APP_SEL_STREAM selector
The udp_ip4_ind bit is set only for IPv4 UDP non-fragmented packets
so that the hardware can flip the checksum to 0xFFFF if the computed
checksum is 0 per RFC768.
However, this bit had to be set for IPv6 UDP non fragmented packets
as well per hardware requirements. Otherwise, IPv6 UDP packets
with computed checksum as 0 were transmitted by hardware and were
dropped in the network.
In addition to setting this bit for IPv6 UDP, the field is also
appropriately renamed to udp_ind as part of this change.
Fixes: 5eb5f8608e ("net: qualcomm: rmnet: Add support for TX checksum offload")
Cc: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
ip4ip6/ip6ip6 tunnels run iptunnel_handle_offloads on xmit which
can cause a possible use-after-free accessing iph/ipv6h pointer
since the packet will be 'uncloned' running pskb_expand_head if
it is a cloned gso skb.
Fixes: 0e9a709560 ("ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets")
Signed-off-by: Haishuang Yan <yanhaishuang@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull drm fixes from Daniel Vetter:
"Dave seems to collect an entire streak of things happening, so again
me typing pull summary.
Nothing nefarious here, most of the fixes are for new stuff or things
users won't see. The amd-display patches are a bit different, and very
much look like they should have at least some cc: stable tags. Might
be amd is a bit too comfortable with their internal tree and not
enough looking at upstream. Dave&me are looking into this, in case
something needs rectified with process here.
Also no intel fixes pull, but intel CI is general become rather good,
still I guess expect a notch more for -rc3.
Summary:
amdgpu:
- fixes for (new in 5.3) hw support (vega20, navi)
- disable RAS
- lots of display fixes all over (audio, DSC, dongle, clock mgr)
ttm:
- fix dma_free_attrs calls to appease dma debugging
msm:
- fixes for dma-api, locking debug and compiler splats
core:
- fix cmdline mode to not apply rotation if not specified (new in 5.3)
- compiler warn fix"
* tag 'drm-fixes-2019-07-26' of git://anongit.freedesktop.org/drm/drm: (46 commits)
drm/amd/display: Set enabled to false at start of audio disable
drm/amdgpu/smu: move fan rpm query into the asic specific code
drm/amd/powerplay: custom peak clock freq for navi10
drm: silence variable 'conn' set but not used
drm/msm: stop abusing dma_map/unmap for cache
drm/msm/dpu: Correct dpu encoder spinlock initialization
drm/msm: correct NULL pointer dereference in context_init
drm/amd/display: handle active dongle port type is DP++ or DP case
drm/amd/display: do not read link setting if edp not connected
drm/amd/display: Increase size of audios array
drm/amd/display: drop ASSERT() if eDP panel is not connected
drm/amd/display: Only enable audio if speaker allocation exists
drm/amd/display: Fix dc_create failure handling and 666 color depths
drm/amd/display: allocate 4 ddc engines for RV2
drm/amd/display: put back front end initialization sequence
drm/amd/display: Wait for flip to complete
drm/amd/display: Change min_h_sync_width from 8 to 4
drm/amd/display: use encoder's engine id to find matched free audio device
drm/amd/display: fix DMCU hang when going into Modern Standby
drm/amd/display: Disable Audio on reinitialize hardware
...
Make sure the delayed work for stats update is not pending before
wq destruction.
This fixes the module unload path.
The issue is there since day 1.
Fixes: a556c76adc ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The hw_ver field was initialized to zero. Return the chip revision.
This is relevant for rdma driver.
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The BroadMobi BM818 M.2 card uses the QMI protocol
Signed-off-by: Bob Ham <bob.ham@puri.sm>
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
We should only set the max segment size to unlimited if we actually
have a virt boundary. Otherwise we accidentally clear that limit
when called from the SCSI midlayer, which always calls
blk_queue_virt_boundary, even if that mask is 0.
Fixes: 7ad388d8e4 ("scsi: core: add a host / host template field for the virt boundary")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull documentation fixes from Jonathan Corbet:
"This is mostly a set of follow-on fixes from Mauro fixing various
fallout from the massive RST conversion; a few other small fixes as
well"
* tag 'docs-5.3-1' of git://git.lwn.net/linux: (21 commits)
docs: phy: Drop duplicate 'be made'
doc:it_IT: translations in process/
docs/vm: transhuge: fix typo in madvise reference
doc:it_IT: rephrase statement
doc:it_IT: align translation to mainline
docs: load_config.py: ensure subdirs end with "/"
docs: virtual: add it to the documentation body
docs: remove extra conf.py files
docs: load_config.py: avoid needing a conf.py just due to LaTeX docs
scripts/sphinx-pre-install: seek for Noto CJK fonts for pdf output
scripts/sphinx-pre-install: cleanup Gentoo checks
scripts/sphinx-pre-install: fix latexmk dependencies
scripts/sphinx-pre-install: don't use LaTeX with CentOS 7
scripts/sphinx-pre-install: fix script for RHEL/CentOS
docs: conf.py: only use CJK if the font is available
docs: conf.py: add CJK package needed by translations
docs: pdf: add all Documentation/*/index.rst to PDF output
docs: fix broken doc references due to renames
docs: power: add it to to the main documentation index
docs: powerpc: convert docs to ReST and rename to *.rst
...
Pull arm64 fixes from Will Deacon:
"There's more here than we usually have at this stage, but that's
mainly down to the stacktrace changes which came in slightly too late
for the merge window.
Summary:
- Big bad batch of MAINTAINERS updates
- Fix handling of SP alignment fault exceptions
- Fix PSTATE.SSBS handling on heterogeneous systems
- Fix fallout from moving to the generic vDSO implementation
- Fix stack unwinding in the face of frame corruption
- Fix off-by-one in IORT code
- Minor SVE cleanups"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
ACPI/IORT: Fix off-by-one check in iort_dev_find_its_id()
arm64: entry: SP Alignment Fault doesn't write to FAR_EL1
arm64: Force SSBS on context switch
MAINTAINERS: Update my email address
MAINTAINERS: Update my email address
MAINTAINERS: Fix spelling mistake in my name
MAINTAINERS: Update my email address to @kernel.org
arm64: mm: Drop pte_huge()
arm64/sve: Fix a couple of magic numbers for the Z-reg count
arm64/sve: Factor out FPSIMD to SVE state conversion
arm64: stacktrace: Better handle corrupted stacks
arm64: stacktrace: Factor out backtrace initialisation
arm64: stacktrace: Constify stacktrace.h functions
arm64: vdso: Cleanup Makefiles
arm64: vdso: fix flip/flop vdso build bug
arm64: vdso: Fix population of AT_SYSINFO_EHDR for compat vdso
Pull btrfs fixes from David Sterba:
"Two regression fixes:
- hangs caused by a missing barrier in the locking code
- memory leaks of extent_state due to bad handling of a cached
pointer"
* tag 'for-5.3-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix extent_state leak in btrfs_lock_and_flush_ordered_range
btrfs: Fix deadlock caused by missing memory barrier
Pull vfs umount_tree() leak fix from Al Viro:
"Fix braino introduced in 'switch the remnants of releasing the
mountpoint away from fs_pin'.
The most visible result is leaking struct mount when mounting btrfs,
making it impossible to shut down"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fix the struct mount leak in umount_tree()
Pull block fixes from Jens Axboe:
- Several io_uring fixes/improvements:
- Blocking fix for O_DIRECT (me)
- Latter page slowness for registered buffers (me)
- Fix poll hang under certain conditions (me)
- Defer sequence check fix for wrapped rings (Zhengyuan)
- Mismatch in async inc/dec accounting (Zhengyuan)
- Memory ordering issue that could cause stall (Zhengyuan)
- Track sequential defer in bytes, not pages (Zhengyuan)
- NVMe pull request from Christoph
- Set of hang fixes for wbt (Josef)
- Redundant error message kill for libahci (Ding)
- Remove unused blk_mq_sched_started_request() and related ops (Marcos)
- drbd dynamic alloc shash descriptor to reduce stack use (Arnd)
- blkcg ->pd_stat() non-debug print (Tejun)
- bcache memory leak fix (Wei)
- Comment fix (Akinobu)
- BFQ perf regression fix (Paolo)
* tag 'for-linus-20190726' of git://git.kernel.dk/linux-block: (24 commits)
io_uring: ensure ->list is initialized for poll commands
Revert "nvme-pci: don't create a read hctx mapping without read queues"
nvme: fix multipath crash when ANA is deactivated
nvme: fix memory leak caused by incorrect subsystem free
nvme: ignore subnqn for ADATA SX6000LNP
drbd: dynamically allocate shash descriptor
block: blk-mq: Remove blk_mq_sched_started_request and started_request
bcache: fix possible memory leak in bch_cached_dev_run()
io_uring: track io length in async_list based on bytes
io_uring: don't use iov_iter_advance() for fixed buffers
block: properly handle IOCB_NOWAIT for async O_DIRECT IO
blk-mq: allow REQ_NOWAIT to return an error inline
io_uring: add a memory barrier before atomic_read
rq-qos: use a mb for got_token
rq-qos: set ourself TASK_UNINTERRUPTIBLE after we schedule
rq-qos: don't reset has_sleepers on spurious wakeups
rq-qos: fix missed wake-ups in rq_qos_throttle
wait: add wq_has_single_sleeper helper
block, bfq: check also in-flight I/O in dispatch plugging
block: fix sysfs module parameters directory path in comment
...
Pull sound fixes from Takashi Iwai:
"All relatively small changes:
- a regression fix for PCM link code with CONFIG_REFCOUNT_FULL;
stumbled on a slight difference between atomic_t and refcount_t
- a couple of HD-audio stabilization patches addressing the too slow
PM resume seen on some Intel chips
- a series of ALSA compress-offload API fixes, including the
regression by the previous capture stream support
- trivial LINE6 USB-audio driver fixes, a new Conexant HD-audio chip
coverage, and a fix in AC97 bus error path"
* tag 'sound-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Add a conexant codec entry to let mute led work
ALSA: hda - Fix intermittent CORB/RIRB stall on Intel chips
ALSA: ac97: Fix double free of ac97_codec_device
ALSA: compress: Be more restrictive about when a drain is allowed
ALSA: compress: Don't allow paritial drain operations on capture streams
ALSA: compress: Prevent bypasses of set_params
ALSA: compress: Fix regression on compressed capture streams
ALSA: line6: Fix a typo
ALSA: pcm: Fix refcount_inc() on zero usage
ALSA: line6: Fix wrong altsetting for LINE6_PODHD500_1
ALSA: hda - Optimize resume for codecs without jack detection
Pull IOMMU fixes from Joerg Roedel:
- revert an Intel VT-d patch that caused boot problems on some machines
- fix AMD IOMMU interrupts with x2apic enabled
- fix a potential crash when Intel VT-d domain allocation fails
- fix crash in Intel VT-d driver when accessing a domain without a
flush queue
- formatting fix for new Intel VT-d debugfs code
- fix for use-after-free bug in IOVA code
- fix for a NULL-pointer dereference in Intel VT-d driver when PCI
hotplug is used
- compilation fix for one of the previous fixes
* tag 'iommu-fixes-v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Add support for X2APIC IOMMU interrupts
iommu/iova: Fix compilation error with !CONFIG_IOMMU_IOVA
iommu/vt-d: Print pasid table entries MSB to LSB in debugfs
iommu/iova: Remove stale cached32_node
iommu/vt-d: Check if domain->pgd was allocated
iommu/vt-d: Don't queue_iova() if there is no flush queue
iommu/vt-d: Avoid duplicated pci dma alias consideration
Revert "iommu/vt-d: Consolidate domain_init() to avoid duplication"
Pull iscsi_ibft fix from Konrad Rzeszutek Wilk:
"One tiny fix to enable iSCSI IBFT to be compiled under ARM"
* 'for-linus-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft:
iscsi_ibft: make ISCSI_IBFT depend on ACPI instead of ISCSI_IBFT_FIND
Pull hwmon fixes from Guenter Roeck:
"A couple of hwmon bug fixes:
- Update k8temp documentation URL
- Register address fixes in nct6775 driver
- Fix potential division by zero in occ driver"
* tag 'hwmon-for-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (k8temp) documentation: update URL of datasheet
hwmon: (nct6775) Fix register address and added missed tolerance for nct6106
hwmon: (occ) Fix division by zero issue
Picking the changes from:
66bb8a065f ("KVM: x86: PMU Event Filter")
f087a02941 ("KVM: nVMX: Stash L1's CR3 in vmcs01.GUEST_CR3 on nested entry w/o EPT")
99adb56763 ("KVM: arm/arm64: Add save/restore support for firmware workaround state")
Silencing this perf build warning:
Warning: Kernel ABI header at 'tools/arch/arm/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm/include/uapi/asm/kvm.h'
diff -u tools/arch/arm/include/uapi/asm/kvm.h arch/arm/include/uapi/asm/kvm.h
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/vmx.h' differs from latest version at 'arch/x86/include/uapi/asm/vmx.h'
diff -u tools/arch/x86/include/uapi/asm/vmx.h arch/x86/include/uapi/asm/vmx.h
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Now 'perf trace' and other code that might use the tools/perf/trace/beauty autogenerated
tables will be able to translate this new ioctl code into a string:
$ tools/perf/trace/beauty/kvm_ioctl.sh > before
$
$ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h
$ tools/perf/trace/beauty/kvm_ioctl.sh > after
$ diff -u before after
--- before 2019-07-26 12:32:47.959220236 -0300
+++ after 2019-07-26 12:33:05.766464871 -0300
@@ -79,6 +79,7 @@
[0xac] = "SET_ONE_REG",
[0xad] = "KVMCLOCK_CTRL",
[0xb0] = "GET_REG_LIST",
+ [0xb2] = "SET_PMU_EVENT_FILTER",
[0xb7] = "SMI",
[0xba] = "MEMORY_ENCRYPT_OP",
[0xbb] = "MEMORY_ENCRYPT_REG_REGION",
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Eric Hankland <ehankland@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <sean.j.christopherson@intel.com>
Link: https://lkml.kernel.org/n/tip-py1gcmt6rboehlwg6zvagfg2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We've added two ESR exception classes for new ARM hardware extensions:
ESR_ELx_EC_PAC and ESR_ELx_EC_SVE, but failed to update the strings
used in tracing and other debug.
Let's update "kvm_arm_exception_class" for these two EC, which the
new EC will be visible to user-space via kvm_exit trace events
Also update to "esr_class_str" for ESR_ELx_EC_PAC, by which we can
get more readable debug info.
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
When fall-through warnings was enabled by default the following warnings
was starting to show up:
../virt/kvm/arm/hyp/vgic-v3-sr.c: In function ‘__vgic_v3_save_aprs’:
../virt/kvm/arm/hyp/vgic-v3-sr.c:351:24: warning: this statement may fall
through [-Wimplicit-fallthrough=]
cpu_if->vgic_ap0r[2] = __vgic_v3_read_ap0rn(2);
~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
../virt/kvm/arm/hyp/vgic-v3-sr.c:352:2: note: here
case 6:
^~~~
../virt/kvm/arm/hyp/vgic-v3-sr.c:353:24: warning: this statement may fall
through [-Wimplicit-fallthrough=]
cpu_if->vgic_ap0r[1] = __vgic_v3_read_ap0rn(1);
~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~
../virt/kvm/arm/hyp/vgic-v3-sr.c:354:2: note: here
default:
^~~~~~~
Rework so that the compiler doesn't warn about fall-through.
Fixes: d93512ef0f0e ("Makefile: Globally enable fall-through warning")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
When fall-through warnings was enabled by default, commit d93512ef0f0e
("Makefile: Globally enable fall-through warning"), the following
warnings was starting to show up:
In file included from ../arch/arm64/include/asm/kvm_emulate.h:19,
from ../arch/arm64/kvm/regmap.c:13:
../arch/arm64/kvm/regmap.c: In function ‘vcpu_write_spsr32’:
../arch/arm64/include/asm/kvm_hyp.h:31:3: warning: this statement may fall
through [-Wimplicit-fallthrough=]
asm volatile(ALTERNATIVE(__msr_s(r##nvh, "%x0"), \
^~~
../arch/arm64/include/asm/kvm_hyp.h:46:31: note: in expansion of macro ‘write_sysreg_elx’
#define write_sysreg_el1(v,r) write_sysreg_elx(v, r, _EL1, _EL12)
^~~~~~~~~~~~~~~~
../arch/arm64/kvm/regmap.c:180:3: note: in expansion of macro ‘write_sysreg_el1’
write_sysreg_el1(v, SYS_SPSR);
^~~~~~~~~~~~~~~~
../arch/arm64/kvm/regmap.c:181:2: note: here
case KVM_SPSR_ABT:
^~~~
In file included from ../arch/arm64/include/asm/cputype.h:132,
from ../arch/arm64/include/asm/cache.h:8,
from ../include/linux/cache.h:6,
from ../include/linux/printk.h:9,
from ../include/linux/kernel.h:15,
from ../include/asm-generic/bug.h:18,
from ../arch/arm64/include/asm/bug.h:26,
from ../include/linux/bug.h:5,
from ../include/linux/mmdebug.h:5,
from ../include/linux/mm.h:9,
from ../arch/arm64/kvm/regmap.c:11:
../arch/arm64/include/asm/sysreg.h:837:2: warning: this statement may fall
through [-Wimplicit-fallthrough=]
asm volatile("msr " __stringify(r) ", %x0" \
^~~
../arch/arm64/kvm/regmap.c:182:3: note: in expansion of macro ‘write_sysreg’
write_sysreg(v, spsr_abt);
^~~~~~~~~~~~
../arch/arm64/kvm/regmap.c:183:2: note: here
case KVM_SPSR_UND:
^~~~
Rework to add a 'break;' in the swich-case since it didn't have that,
leading to an interresting set of bugs.
Cc: stable@vger.kernel.org # v4.17+
Fixes: a892819560 ("KVM: arm64: Prepare to handle deferred save/restore of 32-bit registers")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
[maz: reworked commit message, fixed stable range]
Signed-off-by: Marc Zyngier <maz@kernel.org>
The gic_node is still being used in the rza1_irqc_parse_map() call
after the of_node_put() call, which may result in use-after-free.
Fixes: a644ccb819 ("irqchip: Add Renesas RZ/A1 Interrupt Controller driver")
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Zyngier <maz@kernel.org>
The GPCv2 is a stacked IRQ controller below the ARM GIC. It doesn't
care about the IRQ type itself, but needs to forward the type to the
parent IRQ controller, so this one can be configured correctly.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Each iteration of for_each_child_of_node puts the previous node, but
in the case of a return from the middle of the loop, there is no put,
thus causing a memory leak. Add an of_node_put before the return in
three places.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
