I will lose access to my @arm.com email address next week, so
let's update the MAINTAINERS file and map it correctly in
.mailmap
Signed-off-by: Andrew Murray <andrew.murray@arm.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Though the second half of trampoline page is unused a task could be
preempted in the middle of the first half of trampoline and two
updates to trampoline would change the code from underneath the
preempted task. Hence wait for tasks to voluntarily schedule or go
to userspace. Add similar wait before freeing the trampoline.
Fixes: fec56f5890 ("bpf: Introduce BPF trampoline")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/bpf/20200121032231.3292185-1-ast@kernel.org
When seeding KALSR on a system where we have architecture level random
number generation make use of that entropy, mixing it in with the seed
passed by the bootloader. Since this is run very early in init before
feature detection is complete we open code rather than use archrandom.h.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Expose the ID_AA64ISAR0.RNDR field to userspace, as the RNG system
registers are always available at EL0.
Implement arch_get_random_seed_long using RNDR. Given that the
TRNG is likely to be a shared resource between cores, and VMs,
do not explicitly force re-seeding with RNDRRS. In order to avoid
code complexity and potential issues with hetrogenous systems only
provide values after cpufeature has finalized the system capabilities.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[Modified to only function after cpufeature has finalized the system
capabilities and move all the code into the header -- broonie]
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
[will: Advertise HWCAP via /proc/cpuinfo]
Signed-off-by: Will Deacon <will@kernel.org>
A load on an ESB page returning all 1's means that the underlying
device has invalidated the access to the PQ state of the interrupt
through mmio. It may happen, for example when querying a PHB interrupt
while the PHB is in an error state.
In that case, we should consider the interrupt to be invalid when
checking its state in the irq_get_irqchip_state() handler.
Fixes: da15c03b04 ("powerpc/xive: Implement get_irqchip_state method for XIVE to fix shutdown race")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
[clg: wrote a commit log, introduced XIVE_ESB_INVALID ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200113130118.27969-1-clg@kaod.org
The main irq handler function starts by first masking disabled
interrupts in the status register values to ensure to only handle
enabled interrupts. This is important as when the RX path in the
hardware is disabled reading the RX fifo results in an external abort.
This checking must be done under the port lock, otherwise the following
can happen:
CPU1 | CPU2
|
irq triggers as there are chars |
in the RX fifo |
| grab port lock
imx_uart_int finds RRDY enabled |
and calls imx_uart_rxint which |
has to wait for port lock |
| disable RX (e.g. because we're
| using RS485 with !RX_DURING_TX)
|
| release port lock
read from RX fifo with RX |
disabled => exception |
So take the port lock only once in imx_uart_int() instead of in the
functions called from there.
Reported-by: Andre Renaud <arenaud@designa-electronics.com>
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20200121071702.20150-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Unbinding the bcm2835aux UART driver raises the following error if the
maximum number of 8250 UARTs is set to 1 (via the 8250.nr_uarts module
parameter or CONFIG_SERIAL_8250_RUNTIME_UARTS):
(NULL device *): Removing wrong port: a6f80333 != fa20408b
That's because bcm2835aux_serial_probe() retrieves UART line number 1
from the devicetree and stores it in data->uart.port.line, while
serial8250_register_8250_port() instead uses UART line number 0,
which is stored in data->line.
On driver unbind, bcm2835aux_serial_remove() uses data->uart.port.line,
which contains the wrong number. Fix it.
The issue does not occur if the maximum number of 8250 UARTs is >= 2.
Fixes: bdc5f30095 ("serial: bcm2835: add driver for bcm2835-aux-uart")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v4.6+
Cc: Martin Sperl <kernel@martin.sperl.org>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/912ccf553c5258135c6d7e8f404a101ef320f0f4.1579175223.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enable this Kconfig on COMPILE_TEST enabled configs so we can get more
build coverage.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Set the MODULE_FIRMWARE for tegra186, it's registered for 124/210 and
ensures the firmware is available at the appropriate time such as in
the initrd, else if the firmware is unavailable the driver fails with
the following errors:
tegra-xusb 3530000.usb: Direct firmware load for nvidia/tegra186/xusb.bin failed with error -2
tegra-xusb 3530000.usb: failed to request firmware: -2
tegra-xusb 3530000.usb: failed to load firmware: -2
tegra-xusb: probe of 3530000.usb failed with error -2
Fixes: 5f9be5f3f8 ("usb: host: xhci-tegra: Add Tegra186 XUSB support")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200120141910.116097-1-pbrobinson@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Georgi writes:
interconnect patches for 5.6
Here are the interconnect patches for the 5.6-rc1 merge window.
- New core helper functions for some common functionalities in drivers.
- Improvements in the information exposed via debugfs.
- Basic tracepoints support.
- New interconnect driver for msm8916 platforms.
- Misc fixes.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
* tag 'icc-5.6-rc1' of https://git.linaro.org/people/georgi.djakov/linux:
interconnect: qcom: Add MSM8916 interconnect provider driver
dt-bindings: interconnect: Add Qualcomm MSM8916 DT bindings
interconnect: Check for valid path in icc_set_bw()
interconnect: Print the tag in the debugfs summary
interconnect: Add interconnect_graph file to debugfs
interconnect: qcom: Use the standard aggregate function
interconnect: Add a common standard aggregate function
interconnect: Add basic tracepoints
interconnect: Add a name to struct icc_path
interconnect: Move internal structs into a separate file
interconnect: qcom: Use the new common helper for node removal
interconnect: Add a common helper for removing all nodes
Moritz writes:
Here is the first set of FPGA changes for 5.6
The first two patches are minor cleanups to the DFL drivers,
that remove unused warnings.
The third patch removes a redundant error message to the ts73xx driver.
The last patch removes a confusing print in case a call to devm_clk_get
returns -EPROBE_DEFER.
All patches have been reviewed on the mailing list and have been in the
last couple of linux-next releases without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>
* tag 'fpga-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
fpga: xilinx-pr-decoupler: Remove clk_get error message for probe defer
fpga: remove redundant dev_err message
fpga: dfl: afu: remove set but not used variable 'afu'
fpga: dfl: fme: remove set but not used variable 'fme'
Following the device's documentation guidance, reading a packet from the
device or writing a packet to it must be atomic. Previously, only
reading device's vacancy (before writing on it) or occupancy (before
reading from it) was locked. Hence, effectively reading the packet or
writing the packet wasn't locked at all. However, reading a packet (and
writing one, to a lesser extent) requires to read 3 different registers
in a specific order, without missing one or else we should reset the
device.
This patch fixes the device's locking mechanism on the FIFO character
device. As the device was using copy_from_user() and copy_to_user(), we
need to replace spinlocks with mutexes.
Signed-off-by: Quentin Deslandes <quentin.deslandes@itdev.co.uk>
Link: https://lore.kernel.org/r/20200121103958.12941-1-quentin.deslandes@itdev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the length of the socket buffer is 0xFFFFFFFF (max size for an
unsigned int), then payload_len becomes 0xFFFFFFF1 after subtracting 14
(ETH_HLEN). Then, mdp_len is set to payload_len + 16 (MDP_HDR_LEN)
which overflows and results in a value of 2. These values for
payload_len and mdp_len will pass current buffer size checks.
This patch checks if derived from skb->len sum may overflow.
The check is based on the following idea:
For any `unsigned V1, V2` and derived `unsigned SUM = V1 + V2`,
`V1 + V2` overflows iif `SUM < V1`.
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrey Shvetsov <andrey.shvetsov@k2l.de>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200116172238.6046-1-andrey.shvetsov@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the ARM accelerated ChaCha driver is built as part of a configuration
that has kernel mode NEON disabled, we expect the compiler to propagate
the build time constant expression IS_ENABLED(CONFIG_KERNEL_MODE_NEON) in
a way that eliminates all the cross-object references to the actual NEON
routines, which allows the chacha-neon-core.o object to be omitted from
the build entirely.
Unfortunately, this fails to work as expected in some cases, and we may
end up with a build error such as
chacha-glue.c:(.text+0xc0): undefined reference to `chacha_4block_xor_neon'
caused by the fact that chacha_doneon() has not been eliminated from the
object code, even though it will never be called in practice.
Let's fix this by adding some IS_ENABLED(CONFIG_KERNEL_MODE_NEON) tests
that are not strictly needed from a logical point of view, but should
help the compiler infer that the NEON code paths are unreachable in
those cases.
Fixes: b36d8c09e7 ("crypto: arm/chacha - remove dependency on generic ...")
Reported-by: Russell King <linux@armlinux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for the crypto engine used in i.mx8mp (i.MX 8M "Plus"),
which is very similar to the one used in i.mx8mq, i.mx8mm, i.mx8mn.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
