Read times from p->time_in_state. Remove the "times" pointer, which is
never initialized.
Bug: 75238970
Test: /proc/<pid>/time_in_state now shows some nonzero values
Change-Id: I2f375b64ec39de034da3e24e5e5fb58b04958b76
Signed-off-by: Connor O'Brien <connoro@google.com>
The newly added dtc warning to check DT unit-address without reg
property and vice-versa generates lots of warnings. Turn off the check
unless building with W=1 or W=2.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Michal Marek <mmarek@suse.com>
Cc: linux-kbuild@vger.kernel.org
(cherry picked from commit bc553986a2)
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ief2e68988f6cf32cb4e98f489fa4079f523c0887
Add a NEON-accelerated implementation of Speck128-XTS and Speck64-XTS
for ARM64. This is ported from the 32-bit version. It may be useful on
devices with 64-bit ARM CPUs that don't have the Cryptography
Extensions, so cannot do AES efficiently -- e.g. the Cortex-A53
processor on the Raspberry Pi 3.
It generally works the same way as the 32-bit version, but there are
some slight differences due to the different instructions, registers,
and syntax available in ARM64 vs. in ARM32. For example, in the 64-bit
version there are enough registers to hold the XTS tweaks for each
128-byte chunk, so they don't need to be saved on the stack.
Benchmarks on a Raspberry Pi 3 running a 64-bit kernel:
Algorithm Encryption Decryption
--------- ---------- ----------
Speck64/128-XTS (NEON) 92.2 MB/s 92.2 MB/s
Speck128/256-XTS (NEON) 75.0 MB/s 75.0 MB/s
Speck128/256-XTS (generic) 47.4 MB/s 35.6 MB/s
AES-128-XTS (NEON bit-sliced) 33.4 MB/s 29.6 MB/s
AES-256-XTS (NEON bit-sliced) 24.6 MB/s 21.7 MB/s
The code performs well on higher-end ARM64 processors as well, though
such processors tend to have the Crypto Extensions which make AES
preferred. For example, here are the same benchmarks run on a HiKey960
(with CPU affinity set for the A73 cores), with the Crypto Extensions
implementation of AES-256-XTS added:
Algorithm Encryption Decryption
--------- ----------- -----------
AES-256-XTS (Crypto Extensions) 1273.3 MB/s 1274.7 MB/s
Speck64/128-XTS (NEON) 359.8 MB/s 348.0 MB/s
Speck128/256-XTS (NEON) 292.5 MB/s 286.1 MB/s
Speck128/256-XTS (generic) 186.3 MB/s 181.8 MB/s
AES-128-XTS (NEON bit-sliced) 142.0 MB/s 124.3 MB/s
AES-256-XTS (NEON bit-sliced) 104.7 MB/s 91.1 MB/s
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 91a2abb78f
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/cryptodev-2.6.git master)
(changed speck-neon-glue.c to use blkcipher API instead of skcipher API)
(resolved merge conflicts in arch/arm64/crypto/Makefile and
arch/arm64/crypto/Kconfig)
(made CONFIG_CRYPTO_SPECK_NEON select CONFIG_CRYPTO_GF128MUL, since
gf128mul_x_ble() is non-inline in older kernels)
Change-Id: Iaed7a14c84b32b09ec299060a5d27060693043d5
Signed-off-by: Eric Biggers <ebiggers@google.com>
__krealloc may return the same pointer that's passed in if the
original allocation provided enough memory to accommodate the new
request. In this case the "old" uid_entry should not be freed or
replaced in uid_hash_table, so add a check to avoid doing so.
Bug: 74338318
Test: Hikey960 boots & shows reasonable UID numbers
Change-Id: Id1a094f60a8ffcc827358d0f40c9f3ff70719cce
Signed-off-by: Connor O'Brien <connoro@google.com>
Support both 16-bit and 32-bit framebuffers.
BUG: 72717639
Change-Id: Ib1357ef6c16d66a9d94da57bb97558c5ff820640
Signed-off-by: Bo Hu <bohu@google.com>
Signed-off-by: Roman Kiryanov <rkir@google.com>
Patch 2898d1ea41
ANDROID: Address checkpatch.pl warnings in goldfish_pipe_v2
has typo in function call.
Change-Id: I3355c4a71f1e4026b6095a34cfe7adefa52f7fb6
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
Cherry-pick from origin/upstream-f2fs-stable-linux-4.4.y:
39ed8376d6 ("f2fs: don't put dentry page in pagecache into highmem")
Previous dentry page uses highmem, which will cause panic in platforms
using highmem (such as arm), since the address space of dentry pages
from highmem directly goes into the decryption path via the function
fscrypt_fname_disk_to_usr. But sg_init_one assumes the address is not
from highmem, and then cause panic since it doesn't call kmap_high but
kunmap_high is triggered at the end. To fix this problem in a simple
way, this patch avoids to put dentry page in pagecache into highmem.
Change-Id: I0c87dafb92fce72bf70403a15d28c73992c03203
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
[Jaegeuk Kim: fix coding style]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This driver was inherited from qemu1 and not used anymore.
Test: manually (built the kernel)
Change-Id: Ie66773bbde4ece8ade86f441effb6a94c16b9660
Signed-off-by: Roman Kiryanov <rkir@google.com>
Also enable the roraty device in Kconfig and
defconfigs.
Change-Id: Id05325a1d7e5a03baf6f85bb28bd6ee87fa8a20c
Signed-off-by: Roman Kiryanov <rkir@google.com>
Signed-off-by: Lingfeng Yang <lfy@google.com>
Per-UID proc files require rtmutex, so add an include statement and
make CONFIG_PROC_UID depend on CONFIG_RT_MUTEXES
Bug: 74338318
Test: Previously broken bcm63xx and stm32 builds now succeed.
Change-Id: Id9d44775cf9ea04319d21d833a4666e3dfc16b40
Signed-off-by: Connor O'Brien <connoro@google.com>
binder_send_failed_reply() is called when a synchronous
transaction fails. It reports an error to the thread that
is waiting for the completion. Given that the transaction
is synchronous, there should never be more than 1 error
response to that thread -- this was being asserted with
a WARN().
However, when exercising the driver with syzbot tests, cases
were observed where multiple "synchronous" requests were
sent without waiting for responses, so it is possible that
multiple errors would be reported to the thread. This testing
was conducted with panic_on_warn set which forced the crash.
This is easily reproduced by sending back-to-back
"synchronous" transactions without checking for any
response (eg, set read_size to 0):
bwr.write_buffer = (uintptr_t)&bc1;
bwr.write_size = sizeof(bc1);
bwr.read_buffer = (uintptr_t)&br;
bwr.read_size = 0;
ioctl(fd, BINDER_WRITE_READ, &bwr);
sleep(1);
bwr2.write_buffer = (uintptr_t)&bc2;
bwr2.write_size = sizeof(bc2);
bwr2.read_buffer = (uintptr_t)&br;
bwr2.read_size = 0;
ioctl(fd, BINDER_WRITE_READ, &bwr2);
sleep(1);
The first transaction is sent to the servicemanager and the reply
fails because no VMA is set up by this client. After
binder_send_failed_reply() is called, the BINDER_WORK_RETURN_ERROR
is sitting on the thread's todo list since the read_size was 0 and
the client is not waiting for a response.
The 2nd transaction is sent and the BINDER_WORK_RETURN_ERROR has not
been consumed, so the thread's reply_error.cmd is still set (normally
cleared when the BINDER_WORK_RETURN_ERROR is handled). Therefore
when the servicemanager attempts to reply to the 2nd failed
transaction, the error is already set and it triggers this warning.
This is a user error since it is not waiting for the synchronous
transaction to complete. If it ever does check, it will see an
error.
Changed the WARN() to a pr_warn().
Signed-off-by: Todd Kjos <tkjos@android.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
(cherry picked from commit e46a3b3ba7)
Change-Id: I3365b0775ceee37bdb1d868e3ce066c260aa88ea
Without these, the goldfish x86 and x86_64 builds fail.
Test: build kernel for goldfish x86 and x86_64
Change-Id: I1cbdbaaa03404975ee51c7420927d605074c93e4
Signed-off-by: Connor O'Brien <connoro@google.com>
Add per-uid files that report the data in binary format rather than
text, to allow faster reading & parsing by userspace.
Signed-off-by: Connor O'Brien <connoro@google.com>
Bug: 72339335
Test: compare values to those reported in /proc/uid_time_in_state
Change-Id: I463039ea7f17b842be4c70024fe772539fe2ce02
Add support for reporting per-uid information through procfs, roughly
following the approach used for per-tid and per-tgid directories in
fs/proc/base.c.
This also entails some new tracking of which uids have been used, to
avoid losing information when the last task with a given uid exits.
Signed-off-by: Connor O'Brien <connoro@google.com>
Bug: 72339335
Test: ls /proc/uid/; compare with UIDs in /proc/uid_time_in_state
Change-Id: I0908f0c04438b11ceb673d860e58441bf503d478
Add time in state data to task structs, and create
/proc/<pid>/time_in_state files to show how long each individual task
has run at each frequency.
Create a CONFIG_CPU_FREQ_TIMES option to enable/disable this tracking.
Signed-off-by: Connor O'Brien <connoro@google.com>
Bug: 72339335
Test: Read /proc/<pid>/time_in_state
Change-Id: Ia6456754f4cb1e83b2bc35efa8fbe9f8696febc8
* linux-linaro-lsk-v4.4: (515 commits)
Linux 4.4.132
perf/x86: Fix possible Spectre-v1 indexing for x86_pmu::event_map()
perf/core: Fix possible Spectre-v1 indexing for ->aux_pages[]
perf/x86/msr: Fix possible Spectre-v1 indexing in the MSR driver
perf/x86/cstate: Fix possible Spectre-v1 indexing for pkg_msr
perf/x86: Fix possible Spectre-v1 indexing for hw_perf_event cache_*
tracing/uprobe_event: Fix strncpy corner case
Revert "Bluetooth: btusb: Fix quirk for Atheros 1525/QCA6174"
atm: zatm: Fix potential Spectre v1
net: atm: Fix potential Spectre v1
can: kvaser_usb: Increase correct stats counter in kvaser_usb_rx_can_msg()
tracing: Fix regex_match_front() to not over compare the test string
libata: Apply NOLPM quirk for SanDisk SD7UB3Q*G1001 SSDs
rfkill: gpio: fix memory leak in probe error path
xfrm_user: fix return value from xfrm_user_rcv_msg
f2fs: fix a dead loop in f2fs_fiemap()
bdi: Fix oops in wb_workfn()
tcp: fix TCP_REPAIR_QUEUE bound checking
perf: Remove superfluous allocation error check
soreuseport: initialise timewait reuseport field
...
Conflicts:
arch/s390/kernel/module.c
arch/x86/kernel/kprobes/core.c
fs/proc/task_mmu.c
net/ipv6/route.c
Trivial conflicts between AOSP/LSK and backported/rebased LTS changes.
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
commit 2be147f745 upstream.
pool can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/atm/zatm.c:1462 zatm_ioctl() warn: potential spectre issue
'zatm_dev->pool_info' (local cap)
Fix this by sanitizing pool before using it to index
zatm_dev->pool_info
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit acf784bd0c upstream.
ioc_data.dev_num can be controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
net/atm/lec.c:702 lec_vcc_attach() warn: potential spectre issue
'dev_lec'
Fix this by sanitizing ioc_data.dev_num before using it to index
dev_lec. Also, notice that there is another instance in which array
dev_lec is being indexed using ioc_data.dev_num at line 705:
lec_vcc_added(netdev_priv(dev_lec[ioc_data.dev_num]),
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc432c3d7f upstream.
The regex match function regex_match_front() in the tracing filter logic,
was fixed to test just the pattern length from testing the entire test
string. That is, it went from strncmp(str, r->pattern, len) to
strcmp(str, r->pattern, r->len).
The issue is that str is not guaranteed to be nul terminated, and if r->len
is greater than the length of str, it can access more memory than is
allocated.
The solution is to add a simple test if (len < r->len) return 0.
Cc: stable@vger.kernel.org
Fixes: 285caad415 ("tracing/filters: Fix MATCH_FRONT_ONLY filter matching")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 184add2ca2 upstream.
Richard Jones has reported that using med_power_with_dipm on a T450s
with a Sandisk SD7UB3Q256G1001 SSD (firmware version X2180501) is
causing the machine to hang.
Switching the LPM to max_performance fixes this, so it seems that
this Sandisk SSD does not handle LPM well.
Note in the past there have been bug-reports about the following
Sandisk models not working with min_power, so we may need to extend
the quirk list in the future: name - firmware
Sandisk SD6SB2M512G1022I - X210400
Sandisk SD6PP4M-256G-1006 - A200906
Cc: stable@vger.kernel.org
Cc: Richard W.M. Jones <rjones@redhat.com>
Reported-and-tested-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 83e2d0587a upstream.
It doesn't support to run 32bit 'ip' to set xfrm objdect on 64bit host.
But the return value is unknown for user program:
ip xfrm policy list
RTNETLINK answers: Unknown error 524
Replace ENOTSUPP with EOPNOTSUPP:
ip xfrm policy list
RTNETLINK answers: Operation not supported
Signed-off-by: Yi Zhao <yi.zhao@windriver.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Nathan Harold <nharold@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b86e33075e upstream.
A dead loop can be triggered in f2fs_fiemap() using the test case
as below:
...
fd = open();
fallocate(fd, 0, 0, 4294967296);
ioctl(fd, FS_IOC_FIEMAP, fiemap_buf);
...
It's caused by an overflow in __get_data_block():
...
bh->b_size = map.m_len << inode->i_blkbits;
...
map.m_len is an unsigned int, and bh->b_size is a size_t which is 64 bits
on 64 bits archtecture, type conversion from an unsigned int to a size_t
will result in an overflow.
In the above-mentioned case, bh->b_size will be zero, and f2fs_fiemap()
will call get_data_block() at block 0 again an again.
Fix this by adding a force conversion before left shift.
Signed-off-by: Wei Fang <fangwei1@huawei.com>
Acked-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b8b784958e upstream.
Syzbot has reported that it can hit a NULL pointer dereference in
wb_workfn() due to wb->bdi->dev being NULL. This indicates that
wb_workfn() was called for an already unregistered bdi which should not
happen as wb_shutdown() called from bdi_unregister() should make sure
all pending writeback works are completed before bdi is unregistered.
Except that wb_workfn() itself can requeue the work with:
mod_delayed_work(bdi_wq, &wb->dwork, 0);
and if this happens while wb_shutdown() is waiting in:
flush_delayed_work(&wb->dwork);
the dwork can get executed after wb_shutdown() has finished and
bdi_unregister() has cleared wb->bdi->dev.
Make wb_workfn() use wakeup_wb() for requeueing the work which takes all
the necessary precautions against racing with bdi unregistration.
CC: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
CC: Tejun Heo <tj@kernel.org>
Fixes: 839a8e8660
Reported-by: syzbot <syzbot+9873874c735f2892e7e9@syzkaller.appspotmail.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b1993a2de1 upstream.
syzbot reported :
BUG: KMSAN: uninit-value in rtnh_ok include/net/nexthop.h:11 [inline]
BUG: KMSAN: uninit-value in fib_count_nexthops net/ipv4/fib_semantics.c:469 [inline]
BUG: KMSAN: uninit-value in fib_create_info+0x554/0x8d20 net/ipv4/fib_semantics.c:1091
@remaining is an integer, coming from user space.
If it is negative we want rtnh_ok() to return false.
Fixes: 4e902c5741 ("[IPv4]: FIB configuration using struct fib_config")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
