Jonathan writes:
First set of IIO fixes in the 5.6 cycle.
* adxl372
- Fix marking of buffered values as big endian.
* ak8974
- Fix wrong handling of negative values when read from sysfs.
* at91-sama5d2
- Fix differential mode by ensuring configuration set correctly.
* ping
- Use the write sensor type for of_ping_match table.
* sps30
- Kconfig build dependency fix.
* st-sensors
- Fix a wrong identification of which part the SMO8840 ACPI ID indicates.
* stm32-dsfdm
- Fix a sleep in atomic issue by not using a trigger when it makes no sense.
* stm32-timer
- Make sure master mode is disabled when stopping.
* vcnl400
- Update some sampling periods based on new docs.
* tag 'iio-fixes-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: ping: set pa_laser_ping_cfg in of_ping_match
iio: chemical: sps30: fix missing triggered buffer dependency
iio: st_sensors: remap SMO8840 to LIS2DH12
iio: light: vcnl4000: update sampling periods for vcnl4040
iio: light: vcnl4000: update sampling periods for vcnl4200
iio: accel: adxl372: Set iio_chan BE
iio: magnetometer: ak8974: Fix negative raw values in sysfs
iio: trigger: stm32-timer: disable master mode when stopping
iio: adc: stm32-dfsdm: fix sleep in atomic context
iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode
Johan writes:
USB-serial fixes for 5.6-rc7
Here are a couple of new device ids for 5.6-rc.
All have been in linux-next with no reported issues.
* tag 'usb-serial-5.6-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: pl2303: add device-id for HP LD381
USB: serial: option: add ME910G1 ECM composition 0x110b
On a system configured to trigger a crash_kexec() reboot, when only one CPU
is online and another CPU panics while starting-up, crash_smp_send_stop()
will fail to send any STOP message to the other already online core,
resulting in fail to freeze and registers not properly saved.
Moreover even if the proper messages are sent (case CPUs > 2)
it will similarly fail to account for the booting CPU when executing
the final stop wait-loop, so potentially resulting in some CPU not
been waited for shutdown before rebooting.
A tangible effect of this behaviour can be observed when, after a panic
with kexec enabled and loaded, on the following reboot triggered by kexec,
the cpu that could not be successfully stopped fails to come back online:
[ 362.291022] ------------[ cut here ]------------
[ 362.291525] kernel BUG at arch/arm64/kernel/cpufeature.c:886!
[ 362.292023] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 362.292400] Modules linked in:
[ 362.292970] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Not tainted 5.6.0-rc4-00003-gc780b890948a #105
[ 362.293136] Hardware name: Foundation-v8A (DT)
[ 362.293382] pstate: 200001c5 (nzCv dAIF -PAN -UAO)
[ 362.294063] pc : has_cpuid_feature+0xf0/0x348
[ 362.294177] lr : verify_local_elf_hwcaps+0x84/0xe8
[ 362.294280] sp : ffff800011b1bf60
[ 362.294362] x29: ffff800011b1bf60 x28: 0000000000000000
[ 362.294534] x27: 0000000000000000 x26: 0000000000000000
[ 362.294631] x25: 0000000000000000 x24: ffff80001189a25c
[ 362.294718] x23: 0000000000000000 x22: 0000000000000000
[ 362.294803] x21: ffff8000114aa018 x20: ffff800011156a00
[ 362.294897] x19: ffff800010c944a0 x18: 0000000000000004
[ 362.294987] x17: 0000000000000000 x16: 0000000000000000
[ 362.295073] x15: 00004e53b831ae3c x14: 00004e53b831ae3c
[ 362.295165] x13: 0000000000000384 x12: 0000000000000000
[ 362.295251] x11: 0000000000000000 x10: 00400032b5503510
[ 362.295334] x9 : 0000000000000000 x8 : ffff800010c7e204
[ 362.295426] x7 : 00000000410fd0f0 x6 : 0000000000000001
[ 362.295508] x5 : 00000000410fd0f0 x4 : 0000000000000000
[ 362.295592] x3 : 0000000000000000 x2 : ffff8000100939d8
[ 362.295683] x1 : 0000000000180420 x0 : 0000000000180480
[ 362.296011] Call trace:
[ 362.296257] has_cpuid_feature+0xf0/0x348
[ 362.296350] verify_local_elf_hwcaps+0x84/0xe8
[ 362.296424] check_local_cpu_capabilities+0x44/0x128
[ 362.296497] secondary_start_kernel+0xf4/0x188
[ 362.296998] Code: 52805001 72a00301 6b01001f 54000ec0 (d4210000)
[ 362.298652] SMP: stopping secondary CPUs
[ 362.300615] Starting crashdump kernel...
[ 362.301168] Bye!
[ 0.000000] Booting Linux on physical CPU 0x0000000003 [0x410fd0f0]
[ 0.000000] Linux version 5.6.0-rc4-00003-gc780b890948a (crimar01@e120937-lin) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #105 SMP PREEMPT Fri Mar 6 17:00:42 GMT 2020
[ 0.000000] Machine model: Foundation-v8A
[ 0.000000] earlycon: pl11 at MMIO 0x000000001c090000 (options '')
[ 0.000000] printk: bootconsole [pl11] enabled
.....
[ 0.138024] rcu: Hierarchical SRCU implementation.
[ 0.153472] its@2f020000: unable to locate ITS domain
[ 0.154078] its@2f020000: Unable to locate ITS domain
[ 0.157541] EFI services will not be available.
[ 0.175395] smp: Bringing up secondary CPUs ...
[ 0.209182] psci: failed to boot CPU1 (-22)
[ 0.209377] CPU1: failed to boot: -22
[ 0.274598] Detected PIPT I-cache on CPU2
[ 0.278707] GICv3: CPU2: found redistributor 1 region 0:0x000000002f120000
[ 0.285212] CPU2: Booted secondary processor 0x0000000001 [0x410fd0f0]
[ 0.369053] Detected PIPT I-cache on CPU3
[ 0.372947] GICv3: CPU3: found redistributor 2 region 0:0x000000002f140000
[ 0.378664] CPU3: Booted secondary processor 0x0000000002 [0x410fd0f0]
[ 0.401707] smp: Brought up 1 node, 3 CPUs
[ 0.404057] SMP: Total of 3 processors activated.
Make crash_smp_send_stop() account also for the online status of the
calling CPU while evaluating how many CPUs are effectively online: this way
the right number of STOPs is sent and all other stopped-cores's registers
are properly saved.
Fixes: 78fd584cde ("arm64: kdump: implement machine_crash_shutdown()")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
We have been receiving bug reports that ethernet connections over
RTL8153 based ethernet adapters stops working after a while with
errors like these showing up in dmesg when the ethernet stops working:
[12696.189484] r8152 6-1:1.0 enp10s0u1: Tx timeout
[12702.333456] r8152 6-1:1.0 enp10s0u1: Tx timeout
[12707.965422] r8152 6-1:1.0 enp10s0u1: Tx timeout
This has been reported on Dell WD15 docks, Belkin USB-C Express Dock 3.1
docks and with generic USB to ethernet dongles using the RTL8153
chipsets. Some users have tried adding usbcore.quirks=0bda:8153:k to
the kernel commandline and all users who have tried this report that
this fixes this.
Also note that we already have an existing NO_LPM quirk for the RTL8153
used in the Microsoft Surface Dock (where it uses a different usb-id).
This commit adds a NO_LPM quirk for the generic Realtek RTL8153
0bda:8153 usb-id, fixing the Tx timeout errors on these devices.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198931
Cc: stable@vger.kernel.org
Cc: russianneuromancer@ya.ru
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200313120708.100339-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we call fiemap on a truncated file with none blocks allocated,
it makes sense we get nothing from this call. No output means
no blocks have been counted, but the call succeeded. It's a valid
response.
Simple example reproducer:
xfs_io -f 'truncate 2M' -c 'fiemap -v' /cifssch/testfile
xfs_io: ioctl(FS_IOC_FIEMAP) ["/cifssch/testfile"]: Invalid argument
Signed-off-by: Murphy Zhou <jencce.kernel@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
CC: Stable <stable@vger.kernel.org>
The num_remote_opens counter keeps track of the number of open files which must be
maintained by the server at any point. This is a per-tree-connect counter, and the value
of this counter gets displayed in the /proc/fs/cifs/Stats output as a following...
Open files: 0 total (local), 1 open on server
^^^^^^^^^^^^^^^^
As a thumb-rule, we want to increment this counter for each open/create that we
successfully execute on the server. Similarly, we should decrement the counter when
we successfully execute a close.
In this case, an increment was being missed in case of smb2_query_dir_first,
in case of successful open. As a result, we would underflow the counter and we
could even see the counter go to negative after sufficient smb2_query_dir_first calls.
I tested the stats counter for a bunch of filesystem operations with the fix.
And it looks like the counter looks correct to me.
I also check if we missed the increments and decrements elsewhere. It does not
seem so. Few other cases where an open is done and we don't increment the counter are
the compound calls where the corresponding close is also sent in the request.
Signed-off-by: Shyam Prasad N <nspmangalore@gmail.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Smatch complains that "rc" could be uninitialized.
fs/cifs/inode.c:2206 cifs_getattr() error: uninitialized symbol 'rc'.
Changing it to "return 0;" improves readability as well.
Fixes: cc1baf98c8f6 ("cifs: do not ignore the SYNC flags in getattr")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Pull HID fixes from Jiri Kosina:
- string buffer formatting fixes in picolcd and sensor drivers, from
Takashi Iwai
- two new device IDs from Chen-Tsung Hsieh and Tony Fischetti
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: add ALWAYS_POLL quirk to lenovo pixart mouse
HID: google: add moonball USB id
HID: hid-sensor-custom: Use scnprintf() for avoiding potential buffer overflow
HID: hid-picolcd_fb: Use scnprintf() for avoiding potential buffer overflow
Newer GCC warns about possible truncations of two generated path names as
we're concatenating the configurable sysfs and debugfs path prefixes
with a filename and placing the results in buffers of the same size as
the maximum length of the prefixes.
snprintf(d->name, MAX_STR_LEN, "gb_loopback%u", dev_id);
snprintf(d->sysfs_entry, MAX_SYSFS_PATH, "%s%s/",
t->sysfs_prefix, d->name);
snprintf(d->debugfs_entry, MAX_SYSFS_PATH, "%sraw_latency_%s",
t->debugfs_prefix, d->name);
Fix this by separating the maximum path length from the maximum prefix
length and reducing the latter enough to fit the generated strings.
Note that we also need to reduce the device-name buffer size as GCC
isn't smart enough to figure out that we ever only used MAX_STR_LEN
bytes of it.
Fixes: 6b0658f687 ("greybus: tools: Add tools directory to greybus repo and add loopback")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20200312110151.22028-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Newer GCC warns about a possible truncation of a generated sysfs path
name as we're concatenating a directory path with a file name and
placing the result in a buffer that is half the size of the maximum
length of the directory path (which is user controlled).
loopback_test.c: In function 'open_poll_files':
loopback_test.c:651:31: warning: '%s' directive output may be truncated writing up to 511 bytes into a region of size 255 [-Wformat-truncation=]
651 | snprintf(buf, sizeof(buf), "%s%s", dev->sysfs_entry, "iteration_count");
| ^~
loopback_test.c:651:3: note: 'snprintf' output between 16 and 527 bytes into a destination of size 255
651 | snprintf(buf, sizeof(buf), "%s%s", dev->sysfs_entry, "iteration_count");
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix this by making sure the buffer is large enough the concatenated
strings.
Fixes: 6b0658f687 ("greybus: tools: Add tools directory to greybus repo and add loopback")
Fixes: 9250c0ee26 ("greybus: Loopback_test: use poll instead of inotify")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20200312110151.22028-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SDHCI_PRESET_FOR_* registers are not set for the UniPhier platform
integration. (They are all read as zeros).
Set the SDHCI_QUIRK2_PRESET_VALUE_BROKEN quirk flag. Otherwise, the
High Speed DDR mode on the eMMC controller (MMC_TIMING_MMC_DDR52)
would not work.
I split the platform data to give no impact to other platforms,
although the UniPhier platform is currently only the upstream user
of this IP.
The SDHCI_QUIRK2_PRESET_VALUE_BROKEN flag is set if the compatible
string matches to "socionext,uniphier-sd4hc".
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200312104257.21017-1-yamada.masahiro@socionext.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
On the Acer Aspire Switch 10 (SW5-012) microSD slot always reports the card
being write-protected even though microSD cards do not have a write-protect
switch at all.
Add a new DMI_QUIRK_SD_NO_WRITE_PROTECT quirk which when set sets
the MMC_CAP2_NO_WRITE_PROTECT flag on the controller for the external SD
slot; and add a DMI quirk table entry which selects this quirk for the
Acer SW5-012.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200316184753.393458-2-hdegoede@redhat.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Based on a sample of 7 DSDTs from Cherry Trail devices using an AXP288
PMIC depending on the design one of 2 possible LDOs on the PMIC is used
for the MMC signalling voltage, either DLDO3 or GPIO1LDO (GPIO1 pin in
low noise LDO mode).
The Lenovo Miix 320-10ICR uses GPIO1LDO in the SHC1 ACPI device's DSM
methods to set 3.3 or 1.8 signalling voltage and this appears to work
as advertised, so presumably the device is actually using GPIO1LDO for
the external microSD signalling voltage.
But this device has a bug in the _PS0 method of the SHC1 ACPI device,
the DSM remembers the last set signalling voltage and the _PS0 restores
this after a (runtime) suspend-resume cycle, but it "restores" the voltage
on DLDO3 instead of setting it on GPIO1LDO as the DSM method does. DLDO3
is used for the LCD and setting it to 1.8V causes the LCD to go black.
This commit works around this issue by calling the Intel DSM to reset the
signal voltage to 3.3V after the host has been runtime suspended.
This will make the _PS0 method reprogram the DLDO3 voltage to 3.3V, which
leaves it at its original setting fixing the LCD going black.
This commit adds and uses a DMI quirk mechanism to only trigger this
workaround on the Lenovo Miix 320 while leaving the behavior of the
driver unchanged on other devices.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=111294
BugLink: https://gitlab.freedesktop.org/drm/intel/issues/355
Reported-by: russianneuromancer <russianneuromancer@ya.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200316184753.393458-1-hdegoede@redhat.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Even though INITRAMFS_SOURCE kconfig option isn't set in most of
defconfigs it is used (set) extensively by various build systems.
Commit f26661e127 ("initramfs: make initramfs compression choice
non-optional") has changed default compression mode. Previously we
compress initramfs using available compression algorithm. Now
we don't use any compression at all by default.
It significantly increases the image size in case of build system
chooses embedded initramfs. Initially I faced with this issue while
using buildroot.
As of today it's not possible to set preferred compression mode
in target defconfig as this option depends on INITRAMFS_SOURCE
being set. Modification of all build systems either doesn't look
like good option.
Let's instead rewrite initramfs compression mode choices list
the way that "INITRAMFS_COMPRESSION_NONE" will be the last option
in the list. In that case it will be chosen only if all other
options (which implements any compression) are not available.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
In order to preserve backwards compatability with kmod tools, we have to
move the namespace field in Module.symvers last, as the depmod -e -E
option looks at the first three fields in Module.symvers to check symbol
versions (and it's expected they stay in the original order of crc,
symbol, module).
In addition, update an ancient comment above read_dump() in modpost that
suggested that the export type field in Module.symvers was optional. I
suspect that there were historical reasons behind that comment that are
no longer accurate. We have been unconditionally printing the export
type since 2.6.18 (commit bd5cbcedf4), which is over a decade ago now.
Fix up read_dump() to treat each field as non-optional. I suspect the
original read_dump() code treated the export field as optional in order
to support pre <= 2.6.18 Module.symvers (which did not have the export
type field). Note that although symbol namespaces are optional, the
field will not be omitted from Module.symvers if a symbol does not have
a namespace. In this case, the field will simply be empty and the next
delimiter or end of line will follow.
Cc: stable@vger.kernel.org
Fixes: cb9b55d21f ("modpost: add support for symbol namespaces")
Tested-by: Matthias Maennich <maennich@google.com>
Reviewed-by: Matthias Maennich <maennich@google.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
A lenovo pixart mouse (17ef:608d) is afflicted common the the malfunction
where it disconnects and reconnects every minute--each time incrementing
the device number. This patch adds the device id of the device and
specifies that it needs the HID_QUIRK_ALWAYS_POLL quirk in order to
work properly.
Signed-off-by: Tony Fischetti <tony.fischetti@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull irq fix from Thomas Gleixner:
"A single commit to handle an erratum in Cavium ThunderX to prevent
access to GIC registers which are broken in the implementation"
* tag 'irq-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3: Workaround Cavium erratum 38539 when reading GICD_TYPER2
Pull futex fix from Thomas Gleixner:
"Fix for yet another subtle futex issue.
The futex code used ihold() to prevent inodes from vanishing, but
ihold() does not guarantee inode persistence. Replace the inode
pointer with a per boot, machine wide, unique inode identifier.
The second commit fixes the breakage of the hash mechanism which
causes a 100% performance regression"
* tag 'locking-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Unbreak futex hashing
futex: Fix inode life-time issue
Pull x86 fixes from Thomas Gleixner:
"Two fixes for x86:
- Map EFI runtime service data as encrypted when SEV is enabled.
Otherwise e.g. SMBIOS data cannot be properly decoded by dmidecode.
- Remove the warning in the vector management code which triggered
when a managed interrupt affinity changed outside of a CPU hotplug
operation.
The warning was correct until the recent core code change that
introduced a CPU isolation feature which needs to migrate managed
interrupts away from online CPUs under certain conditions to
achieve the isolation"
* tag 'x86-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vector: Remove warning on managed interrupt migration
x86/ioremap: Map EFI runtime services data as encrypted for SEV
Pull perf fixes from Thomas Gleixner:
"A pile of perf fixes:
Kernel side:
- AMD uncore driver: Replace the open coded sanity check with the
core variant, which provides the correct error code and also leaves
a hint in dmesg
Tooling:
- Fix the stdio input handling with glibc versions >= 2.28
- Unbreak the futex-wake benchmark which was reduced to 0 test
threads due to the conversion to cpumaps
- Initialize sigaction structs before invoking sys_sigactio()
- Plug the mapfile memory leak in perf jevents
- Fix off by one relative directory includes
- Fix an undefined string comparison in perf diff"
* tag 'perf-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/amd/uncore: Replace manual sampling check with CAP_NO_INTERRUPT flag
tools: Fix off-by 1 relative directory includes
perf jevents: Fix leak of mapfile memory
perf bench: Clear struct sigaction before sigaction() syscall
perf bench futex-wake: Restore thread count default to online CPU count
perf top: Fix stdio interface input handling with glibc 2.28+
perf diff: Fix undefined string comparision spotted by clang's -Wstring-compare
perf symbols: Don't try to find a vmlinux file when looking for kernel modules
perf bench: Share some global variables to fix build with gcc 10
perf parse-events: Use asprintf() instead of strncpy() to read tracepoint files
perf env: Do not return pointers to local variables
perf tests bp_account: Make global variable static
Pull timer fix from Thomas Gleixner:
"A single fix adding the missing time namespace adjustment in
sys/sysinfo which caused sys/sysinfo to be inconsistent with
/proc/uptime when read from a task inside a time namespace"
* tag 'timers-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sys/sysinfo: Respect boottime inside time namespace
Pull RAS fixes from Thomas Gleixner:
"Two RAS related fixes:
- Shut down the per CPU thermal throttling poll work properly when a
CPU goes offline.
The missing shutdown caused the poll work to be migrated to a
unbound worker which triggered warnings about the usage of
smp_processor_id() in preemptible context
- Fix the PPIN feature initialization which missed to enable the
functionality when PPIN_CTL was enabled but the MSR locked against
updates"
* tag 'ras-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Fix logic and comments around MSR_PPIN_CTL
x86/mce/therm_throt: Undo thermal polling properly on CPU offline
Pull EFI fixes from Thomas Gleixner:
"Two EFI fixes:
- Prevent a race and buffer overflow in the sysfs efivars interface
which causes kernel memory corruption.
- Add the missing NULL pointer checks in efivar_store_raw()"
* tag 'efi-urgent-2020-03-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Add a sanity check to efivar_store_raw()
efi: Fix a race and a buffer overflow while reading efivars via sysfs
Pull IOMMU fixes from Joerg Roedel:
- Intel VT-d fixes:
- RCU list handling fixes
- Replace WARN_TAINT with pr_warn + add_taint for reporting firmware
issues
- DebugFS fixes
- Fix for hugepage handling in iova_to_phys implementation
- Fix for handling VMD devices, which have a domain number which
doesn't fit into 16 bits
- Warning message fix
- MSI allocation fix for iommu-dma code
- Sign-extension fix for io page-table code
- Fix for AMD-Vi to properly update the is-running bit when AVIC is
used
* tag 'iommu-fixes-v5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Populate debugfs if IOMMUs are detected
iommu/amd: Fix IOMMU AVIC not properly update the is_run bit in IRTE
iommu/vt-d: Ignore devices with out-of-spec domain number
iommu/vt-d: Fix the wrong printing in RHSA parsing
iommu/vt-d: Fix debugfs register reads
iommu/vt-d: quirk_ioat_snb_local_iommu: replace WARN_TAINT with pr_warn + add_taint
iommu/vt-d: dmar_parse_one_rmrr: replace WARN_TAINT with pr_warn + add_taint
iommu/vt-d: dmar: replace WARN_TAINT with pr_warn + add_taint
iommu/vt-d: Silence RCU-list debugging warnings
iommu/vt-d: Fix RCU-list bugs in intel_iommu_init()
iommu/dma: Fix MSI reservation allocation
iommu/io-pgtable-arm: Fix IOVA validation for 32-bit
iommu/vt-d: Fix a bug in intel_iommu_iova_to_phys() for huge page
iommu/vt-d: Fix RCU list debugging warnings
Processing links, io_submit_sqe() prepares requests, drops sqes, and
passes them with sqe=NULL to io_queue_sqe(). There IOSQE_DRAIN and/or
IOSQE_ASYNC requests will go through the same prep, which doesn't expect
sqe=NULL and fail with NULL pointer deference.
Always do full prepare including io_alloc_async_ctx() for linked
requests, and then it can skip the second preparation.
Cc: stable@vger.kernel.org # 5.5
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull i2c fixes from Wolfram Sang:
"I2C has quite some regression fixes this time.
One is also related to watchdogs, we have proper acks from Guenter for
them"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: acpi: put device when verifying client fails
misc: eeprom: at24: fix regulator underflow
i2c: gpio: suppress error on probe defer
macintosh: windfarm: fix MODINFO regression
i2c: designware-pci: Fix BUG_ON during device removal
i2c: i801: Do not add ICH_RES_IO_SMI for the iTCO_wdt device
watchdog: iTCO_wdt: Make ICH_RES_IO_SMI optional
watchdog: iTCO_wdt: Export vendorsupport
Pull ARC fixes from Vineet Gupta:
- Fix __ALIGN_STR and __ALIGN to not use default junk padding
- Misc Kconfig cleanups, header updates
* tag 'arc-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: define __ALIGN_STR and __ALIGN symbols for ARC
ARC: show_regs: reduce lines of output
ARC: Replace <linux/clk-provider.h> by <linux/of_clk.h>
ARC: fpu: fix randconfig build error reported by 0-day test service
ARC: fix some Kconfig typos
ARC: Cleanup old Kconfig IO scheduler options
Pull kvm fixes from Paolo Bonzini:
"Bugfixes for x86 and s390"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: nVMX: avoid NULL pointer dereference with incorrect EVMCS GPAs
KVM: x86: Initializing all kvm_lapic_irq fields in ioapic_write_indirect
KVM: VMX: Condition ENCLS-exiting enabling on CPU support for SGX1
KVM: s390: Also reset registers in sync regs for initial cpu reset
KVM: fix Kconfig menu text for -Werror
KVM: x86: remove stale comment from struct x86_emulate_ctxt
KVM: x86: clear stale x86_emulate_ctxt->intercept value
KVM: SVM: Fix the svm vmexit code for WRMSR
KVM: X86: Fix dereference null cpufreq policy
Currently, the intel iommu debugfs directory(/sys/kernel/debug/iommu/intel)
gets populated only when DMA remapping is enabled (dmar_disabled = 0)
irrespective of whether interrupt remapping is enabled or not.
Instead, populate the intel iommu debugfs directory if any IOMMUs are
detected.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: ee2636b867 ("iommu/vt-d: Enable base Intel IOMMU debugfs support")
Signed-off-by: Megha Dey <megha.dey@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Pull clk fixes from Stephen Boyd:
"A small collection of fixes. I'll make another sweep soon to look for
more fixes for this -rc series.
- Mark device node const in of_clk_get_parent APIs to ease landing
changes in users later
- Fix flag for Qualcomm SC7180 video clocks where we thought it would
never turn off but actually hardware takes care of it
- Remove disp_cc_mdss_rscc_ahb_clk on Qualcomm SC7180 SoCs because
this clk is always on anyway
- Correct some bad dt-binding numbers for i.MX8MN SoCs"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: imx8mn: Fix incorrect clock defines
clk: qcom: dispcc: Remove support of disp_cc_mdss_rscc_ahb_clk
clk: qcom: videocc: Update the clock flag for video_cc_vcodec0_core_clk
of: clk: Make of_clk_get_parent_{count,name}() parameter const
