PD#TV-3067
Problem:
Image signal delay of 1.5 seconds when switching to AV source.
Solution:
1.add av audio control for audio patch.
Verify:
verified by x301
Change-Id: I3e820923a26439b3aeb9841562b81cd6d55ed4ea
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
PD#SH-397
Problem:
use modetest to test A113D DRM function, displaying is incorrect
Solution:
add linear addr config for a113d drm mode
Verify:
verified on s400
Change-Id: Id6a2c6ad94bc0148815076561d9dc2ae8ded6884
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
PD#SWPL-6161
Problem:
partial ir-keys with RC5 can’t been decoded on some boards(Eg: TL1, TXLX)
Solution:
adjust the register to extend the detection range of half/whole bit
Verify:
test pass on TL1
Change-Id: I6ff0af79b3bf9f624c1f249f056b729df7b5dd0c
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
PD#SWPL-5185
Problem:
"fence color format error 28" when test weston-simple-egl
Solution:
reset afbcd flag when convert format value
Verify:
Locally on g12b_w400
Change-Id: I81a9394288026bc596f6b3438cec72ceaad7749f
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#OTT-2745
Problem:
TEST_N used only as gpio, and don't support other function
Solution:
add new group definition for support TEST_N used as i2sout
Verify:
test pass on P212
Change-Id: I47103b27df9baf21537e82b48ad18911a355f873
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
PD#SWPL-5685
Problem:
ge2d buffer index error when dma alloc called simultaneously
Solution:
add lock to ge2d buffer index
Verify:
verified by w400
Change-Id: I1efa4127fbcb939ade457a890769d59a146a0798
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
PD#SWPL-5685
Problem:
gdc buffer index error when dma alloc called simultaneously
Solution:
add lock to gdc buffer index
Verify:
verified by w400
Change-Id: Ia5e41562675b594029fd5a0166561c0069739536
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
PD#TV-2929
Problem:
The pic_mode in cur_dispbuf was changed but not be detected.
Solution:
Add global pic_mode variable to check if the pic_mode in cur_dispbuf
is changed. If so, force vpp_set_filters.
Verify:
verified on x301
Change-Id: I5b95f512ad0823b031989f05526f114694887f2b
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#SWPL-5301
Problem:
When open NUMA config on ARM64, there is compile error
Solution:
fix some compile problems
Verify:
p212
Change-Id: I1ae9ef975c680e3e5545186aac9ca2b57597bfe4
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
PD#SWPL-5613
Problem:
boot fail because of the UBI write error
Solution:
fixed nested-calls spin-lock when update bbt
Verify:
AXG-S420
Change-Id: I56b603ebffa5557ab7949ead2fddd41323346d09
Signed-off-by: xianjun.liu <xianjun.liu@amlogic.com>
PD#SWPL-5564
Problem:
When open VMAP for kernel stack, if we meet kernel panic log, we
can't know physical address of stack and hard to debug.
Solution:
Print pfn for register in vmalloc range
Verify:
p212
Change-Id: Iee120df1feab88e412ef63e87c2e2bb4ad0645fb
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
PD#SWPL-5833
Problem:
No audio out for g12b socket board
Solution:
Open audio codec
Verify:
test pass on g12b socket board
Change-Id: Ieec710edec218a13da41d249889515b0ac53a3e9
Signed-off-by: huijie.huang <huijie.huang@amlogic.com>
PD#SWPL-4010
Problem:
Not detect audio type by PAO for frhdmirx
Solution:
Add hw detect for frdhmirx PAO
audio type is checked by hw for PCM too
Verify:
x301
Change-Id: Ib60d738c69f336866250a8181609503912bf0485
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
PD#TV-3062
Problem:
When switching channels, Hisense platform needs hold video,
and the timming obtained at this time is wrong
Solution:
because we have add hold video function, so get width and
height interface give the last video frame width and height,
and so on change the video
Verify:
X301
Change-Id: I331a4589dcb5f5785dce7eea6d8cd03c92d733d2
Signed-off-by: Xiaoming Sui <xiaoming.sui@amlogic.com>
PD#SWPL-5942
Problem:
Too many log when DI process called the vpp_set_filters with AFBC.
Solution:
Add log switch to disable it.
Verify:
verified on X301
Change-Id: I34c8573bed78e49d27ec386279e929e617bf76d5
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#OTT-2643
Problem:
when bringup imx307,sensor name in dts need to update
Solution:
add sensor name for imx307 in dts
Verify:
W400
Change-Id: Ic5614326b0debd01efa028f66e7c6337d78ec242
Signed-off-by: shichang.zhai <shichang.zhai@amlogic.com>
PD#SWPL-5366
Problem:
g12b cpucore cooling devices hotplug a little core and a big
when hot trippoint trigger, need to update cooling devices that
hotplug one core one hotstep for big core to little core.
Solution:
1.modify cpucore cooling for new solution.
2.modify hotplug core for can hotplug all big core.
3.ipa dts no cluster id, all cpucore is one cooling device
dts have cluster id, one cluster is one cooling devices.
Verify:
test on g12b w400.
Change-Id: I3320b007e35e7ac415cf7623f74f0a5153fed9b5
Signed-off-by: Huan Biao <huan.biao@amlogic.com>
PD# SWPL-4823
Problem:
1. After stack optimization, stack memory cannot be
mapped as dma buffers and thus causing crypto dma failed to
generate correct result.
2. crypto dma was not enabled on G12B
Solution:
1. Move key_iv buffer from stack to memory provided by kzalloc
2. Enable crypto dma on G12B
3. Replace module_param with debugfs
4. Replace pr_err with dev_err
Verify:
verified on G12B
Change-Id: I6de682e3d1fc141f8c6179c7d91f9b4bff165eae
Signed-off-by: Matthew Shyu <matthew.shyu@amlogic.com>
Signed-off-by: Mingyen Hung <mingyen.hung@amlogic.com>
PD#TV-3085
Problem:
Add VRTC debug interface into TL1 Android P
Solution:
add wakeup and wakeup_time debug nodes
if you want to set alarm time, for example, set alarm wakeup time 10s
echo 10 > /sys/kernel/debug/wakeup_time
if you want to wake the system when an alarm is triggered, like this
echo 1 > /sys/kernel/debug/wakeup
Verify:
tl1_t962x2_x301
Change-Id: Ic40db0d9cb4ac2cab615206518d8db22b4095f72
Signed-off-by: yuehu mi <yuehu.mi@amlogic.com>
PD#SWPL-5594
Problem:
The PDM input channel is not always in the
first lane, we need a mask to detect which
lane to use
Solution:
Add lane config in PDM module
Add lane-mask-in in W411 config
Verify:
W411
Change-Id: I48ca5927402282611ba5e225d75d034eeceacad6
Signed-off-by: yujie.wu <yujie.wu@amlogic.com>
PD#SWPL-4679
Problem:
optimize vsync probe method, by string, not index value in dts
Solution:
optimize vsync probe method, by string, not index value in dts
Verify:
verify by t962x2-x301
Change-Id: Ib87a2913b7dafb3ea3c9c5a936b29939ab7ee034
Signed-off-by: Shaochan Liu <shaochan.liu@amlogic.com>
PD#SWPL-5553
Problem:
Binder will allocate about 1MB vmalloc memory for IPC for each process,
but under code like GTVS, there are about over 100 vmalloc ranges
allocated by binder, which cause vmalloc address range not enough for
other modules.
Solution:
1, only vmalloc 4KB at first;
2, if user space need more memory, try to allocate a new vmalloc
range with large size and move all related data to new place
3, dump vmalloc info if vmalloc failed
Verify:
P212
Change-Id: I07eea2623e5e19d410e0ff8a0bc6b11e2037023c
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
PD#SWPL-4511
Problem:
1Gb SLC Nand ZDND1G08U3D-IA requested by Marketing
aka ZDND1G08U3D-xx module number in code
Solution:
add the nand id into amlogic nand flash id table
Verify:
AXG_S400
Change-Id: I4e221497b801239aa62f62f844ff247fa05925d0
Signed-off-by: Yi Zeng <yi.zeng@amlogic.com>
PD#SWPL-5205
Problem:
Now vdin support afbc+interlace format
Solution:
In vpp, add case to support vdin afbc with interlace
Verify:
tl1_x301, verify pass
Change-Id: I6540b03a6cb5308fc2bc202069aa87234fd35df6
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
PD#TV-3086
Problem:
3D display abnormal. The vd1 canvas1 was incorrect.
Solution:
When enabled 3D function, config vd1 canvas1 correctly
Verify:
x301
Change-Id: I201cda2f33badf1af54ab4f177a17f761c7cea8d
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#TV-3042
Problem:
3D function did not support afbc format before
Solution:
Add the support case which format is afbc.
Verify:
x301
Change-Id: I38189bfa78eec6ac811fb81631514d7d7b8b3d62
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#SWPL-4761
Problem:
When slave device is busy processing, it is unable to handle the
incoming communication attempts. i2c master have to repeatedly attemp
communication until the slave sends an ACK after receiving its slave
address.
Solution:
add retry-process when slave NACK.
Verify:
mesonaxg_s420_32_release
Change-Id: Ieb195176cac4b80e223ea6adb502ffd3bc9ef728
Signed-off-by: Daogao Xu <daogao.xu@amlogic.com>
PD#SWPL-5555
Problem:
Current driver does not support both NEC and RC5
Solution:
Add a macro to depecit both NEC and RC5 state
Verify:
X301
Change-Id: I06894d033eabdb22db6e34fc2ad76e0390ef565f
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
PD#SWPL-5574
Problem:
amixer return error due to ad82584f not exist in W411 platform
Solution:
Disable ad82584f, and remove it from TDM output list
Verify:
Yes
Change-Id: I7fcd5ad31ba57887399c45d67b130e8c3d08e671
Signed-off-by: Blance Tang <guofeng.tang@amlogic.com>
PD#SWPL-4854
Problem:
TXL DTMB has losing lock issue
Solution:
set HHI_DEMOD_CLK_CNTL to 0x301 for TXL
Verify:
verified by t962_p321
Change-Id: I51b61949b5f9c96b64eae7e0054771ce44dbfd5b
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
PD#SWPL-5202
Problem:
cma memory is not released when suspend
Solution:
provide suspend interface to release cma memory
Verify:
verified by t962x2_x301
Change-Id: I1d808a8a6119a2f385961c4c5bded5ab71c9c9d1
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
PD#SWPL-4975
Problem:
some basic saradc registers are only initialized at bl2 stage, the ADC
value is abnormal when bl2 disable saradc init.
Solution:
to re-initialize the basic saradc registers in kernel.
Verify:
test pass on w400 and p212
Change-Id: Ie98e8789fd47cc43cafcb49d9862ccccbe1d9b66
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
PD#OTT-2168
Problem:
media control bar can't displayed because afbc source crop not support
Solution:
add afbc source crop support
Verify:
verify on raven
Change-Id: Ib1f925aeea12ba18d8f976aba8c84f0738c41293
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
PD#SWPL-5014
Problem:
ppmgr provider error sometimes in long time run under poor signal
Solution:
use light reg for video decoder local reset
Verify:
X301
Change-Id: I1500c9ddfdce76b3e9cb2b24a35cdee765f82d5f
Signed-off-by: Hui Zhang <hui.zhang@amlogic.com>
PD#SWPL-5295
Problem:
add RX delay for 8211f and add led setup interface
Solution:
tuning delay and leds
Verify:
verify on u200 board
Change-Id: I45e855894d570fdd976f90fd8f03151ad52a3683
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>
PD#SWPL-5206
Problem:
Setup time in sdio highspeed mode of txlx is
inconsistent with the protocol standard.
Solution:
set co_phase = 2.
Verify:
r321
Change-Id: I3e5a1bca335faea6397513de772d3ee35ea76d40
Signed-off-by: Nan Li <nan.li@amlogic.com>
PD#SWPL-3300
Problem:
local contrast interface for pc tool
Solution:
add driver interface for pc tool
Verify:
tl1
Change-Id: I874ebc6c234f1030fa64a48033580af644550048
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
PD#TV-2272
Problem:
can't get corrent reboot reason in system panic
Solution:
get corrent reboot reason in system panic
Verify:
test pass on T962x2_x301
Change-Id: If0fc95c2807d89542b4ccbc8e3709be20f17b03b
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
PD#SWPL-5017
Problem:
need support dummy lcd for viu1
Solution:
add dummp_panel display mode.
when need viu1 + viu2 -> encl, and show viu2 data,
you can use below setting:
echo dump_panel >/sys/class/display/mode
echo panel >/sys/class/display2/mode
Verify:
x301
Change-Id: I8a7fb52e2272fc8f71d682424ff20dc37f02b726
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
