We have observed rcar_canfd driver entering IRQ storm under high load,
with following scenario:
- rcar_canfd_global_interrupt() in entered due to Rx available,
- napi_schedule_prep() is called, and sets NAPIF_STATE_SCHED in state
- Rx fifo interrupts are masked,
- rcar_canfd_global_interrupt() is entered again, this time due to
error interrupt (e.g. due to overflow),
- since scheduled napi poller has not yet executed, condition for calling
napi_schedule_prep() from rcar_canfd_global_interrupt() remains true,
thus napi_schedule_prep() gets called and sets NAPIF_STATE_MISSED flag
in state,
- later, napi poller function rcar_canfd_rx_poll() gets executed, and
calls napi_complete_done(),
- due to NAPIF_STATE_MISSED flag in state, this call does not clear
NAPIF_STATE_SCHED flag from state,
- on return from napi_complete_done(), rcar_canfd_rx_poll() unmasks Rx
interrutps,
- Rx interrupt happens, rcar_canfd_global_interrupt() gets called
and calls napi_schedule_prep(),
- since NAPIF_STATE_SCHED is set in state at this time, this call
returns false,
- due to that false return, rcar_canfd_global_interrupt() returns
without masking Rx interrupt
- and this results into IRQ storm: unmasked Rx interrupt happens again
and again is misprocessed in the same way.
This patch fixes that scenario by unmasking Rx interrupts only when
napi_complete_done() returns true, which means it has cleared
NAPIF_STATE_SCHED in state.
Fixes: dd3bd23eb4 ("can: rcar_canfd: Add Renesas R-Car CAN FD driver")
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
CONFIG_CAN_LEDS is deprecated. When trying to use the generic netdev
trigger as suggested, there's a small inconsistency with the link
property: The LED is on initially, stays on when the device is brought
up, and then turns off (as expected) when the device is brought down.
Make sure the LED always reflects the state of the CAN device.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Renaming docs seems to be en vogue at the moment, so fix on of the
grossly misnamed directories. We usually never use "virtual" as
a shortcut for virtualization in the kernel, but always virt,
as seen in the virt/ top-level directory. Fix up the documentation
to match that.
Fixes: ed16648eb5 ("Move kvm, uml, and lguest subdirectories under a common "virtual" directory, I.E:")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Retrying immediately after we've received a 'transitioning' sense code is
pretty much pointless, we should always use a delay before retrying. So
ensure the default delay is applied before retrying.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Tested-by: Zhangguanghui <zhang.guanghui@h3c.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
#define relative to FCOE CTLR start with FCOE_CTLR, except
FCOE_CTRL_SOL_TOV.
This is likely a typo and CTRL should be CTLR here as well.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix sparse warnings:
drivers/scsi/megaraid/megaraid_sas_fusion.c:541:1: warning: symbol 'megasas_alloc_cmdlist_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:580:1: warning: symbol 'megasas_alloc_request_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:661:1: warning: symbol 'megasas_alloc_reply_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:738:1: warning: symbol 'megasas_alloc_rdpq_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:920:1: warning: symbol 'megasas_alloc_cmds_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:1740:1: warning: symbol 'megasas_init_adapter_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:1966:1: warning: symbol 'map_cmd_status' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:2379:1: warning: symbol 'megasas_set_pd_lba' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:2718:1: warning: symbol 'megasas_build_ldio_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:3215:1: warning: symbol 'megasas_build_io_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:3328:6: warning: symbol 'megasas_prepare_secondRaid1_IO' was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While loading fw crashdump in function fw_crash_buffer_show(), left bytes
in one dma chunk was not checked, if copying size over it, overflow access
will cause kernel panic.
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull parisc fixes from Helge Deller:
- Fix build issues when kprobes are enabled
- Speed up ITLB/DTLB cache flushes when running on machines with
combined TLBs
* 'parisc-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Flush ITLB in flush_tlb_all_local() only on split TLB machines
parisc: add kprobe_fault_handler()
'channels.max_combined' initialized only on ioctl success and
errno is only valid on ioctl failure.
The code doesn't produce any runtime issues, but makes memory
sanitizers angry:
Conditional jump or move depends on uninitialised value(s)
at 0x55C056F: xsk_get_max_queues (xsk.c:336)
by 0x55C05B2: xsk_create_bpf_maps (xsk.c:354)
by 0x55C089F: xsk_setup_xdp_prog (xsk.c:447)
by 0x55C0E57: xsk_socket__create (xsk.c:601)
Uninitialised value was created by a stack allocation
at 0x55C04CD: xsk_get_max_queues (xsk.c:318)
Additionally fixed warning on uninitialized bytes in ioctl arguments:
Syscall param ioctl(SIOCETHTOOL) points to uninitialised byte(s)
at 0x648D45B: ioctl (in /usr/lib64/libc-2.28.so)
by 0x55C0546: xsk_get_max_queues (xsk.c:330)
by 0x55C05B2: xsk_create_bpf_maps (xsk.c:354)
by 0x55C089F: xsk_setup_xdp_prog (xsk.c:447)
by 0x55C0E57: xsk_socket__create (xsk.c:601)
Address 0x1ffefff378 is on thread 1's stack
in frame #1, created by xsk_get_max_queues (xsk.c:318)
Uninitialised value was created by a stack allocation
at 0x55C04CD: xsk_get_max_queues (xsk.c:318)
CC: Magnus Karlsson <magnus.karlsson@intel.com>
Fixes: 1cad078842 ("libbpf: add support for using AF_XDP sockets")
Signed-off-by: Ilya Maximets <i.maximets@samsung.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
perf.data:
Alexey Budankov:
- Fix loading of compressed data split across adjacent records
Jiri Olsa:
- Fix buffer size setting for processing CPU topology perf.data header.
perf stat:
Jiri Olsa:
- Fix segfault for event group in repeat mode
Cong Wang:
- Always separate "stalled cycles per insn" line, it was being appended to
the "instructions" line.
perf script:
Andi Kleen:
- Fix --max-blocks man page description.
- Improve man page description of metrics.
- Fix off by one in brstackinsn IPC computation.
perf probe:
Arnaldo Carvalho de Melo:
- Avoid calling freeing routine multiple times for same pointer.
perf build:
- Do not use -Wshadow on gcc < 4.8, avoiding too strict warnings
treated as errors, breaking the build.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Eric Dumazet says:
====================
First patch changes the kernel, second patch
adds a new test.
Note that other patches might be needed to take
care of similar issues in sock_ops_convert_ctx_access()
and SOCK_OPS_GET_FIELD()
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use BPF_REG_1 for source and destination of gso_segs read,
to exercise "bpf: fix access to skb_shared_info->gso_segs" fix.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Replace the custom implementation with fwnode_get_mac_address,
which works on both DT and ACPI platforms.
While here, replace memcpy() by ether_addr_copy().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The very first check in test_pkt_md_access is failing on s390, which
happens because loading a part of a struct __sk_buff field produces
an incorrect result.
The preprocessed code of the check is:
{
__u8 tmp = *((volatile __u8 *)&skb->len +
((sizeof(skb->len) - sizeof(__u8)) / sizeof(__u8)));
if (tmp != ((*(volatile __u32 *)&skb->len) & 0xFF)) return 2;
};
clang generates the following code for it:
0: 71 21 00 03 00 00 00 00 r2 = *(u8 *)(r1 + 3)
1: 61 31 00 00 00 00 00 00 r3 = *(u32 *)(r1 + 0)
2: 57 30 00 00 00 00 00 ff r3 &= 255
3: 5d 23 00 1d 00 00 00 00 if r2 != r3 goto +29 <LBB0_10>
Finally, verifier transforms it to:
0: (61) r2 = *(u32 *)(r1 +104)
1: (bc) w2 = w2
2: (74) w2 >>= 24
3: (bc) w2 = w2
4: (54) w2 &= 255
5: (bc) w2 = w2
The problem is that when verifier emits the code to replace a partial
load of a struct __sk_buff field (*(u8 *)(r1 + 3)) with a full load of
struct sk_buff field (*(u32 *)(r1 + 104)), an optional shift and a
bitwise AND, it assumes that the machine is little endian and
incorrectly decides to use a shift.
Adjust shift count calculation to account for endianness.
Fixes: 31fd85816d ("bpf: permits narrower load from bpf program context fields")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The onboard sky2 NIC on ASUS P6T WS PRO doesn't work after PM resume
due to the infamous IRQ problem. Disabling MSI works around it, so
let's add it to the blacklist.
Unfortunately the BIOS on the machine doesn't fill the standard
DMI_SYS_* entry, so we pick up DMI_BOARD_* entries instead.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1142496
Reported-and-tested-by: Marcus Seyfarth <m.seyfarth@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Each iteration of for_each_child_of_node puts the previous node, but in
the case of a return from the middle of the loop, there is no put, thus
causing a memory leak. Hence add an of_node_put before the return.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Each iteration of for_each_available_child_of_node puts the previous
node, but in the case of a return from the middle of the loop, there is
no put, thus causing a memory leak. Hence add an of_node_put before the
return.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[Why]
In an effort to stop redundant calls to dce110_disable_audio_stream
the audio->enabled flag was added to the audio resource struct. While
this state probably shouldn't have been tracked on the audio struct
itself it still works fine for some sequences.
However, it does not work for cases where we're freeing the audio
resource (such as hotplugs) or when dynamic audio is enabled.
In these cases the pipe_ctx->stream_res.audio = NULL before we can
set audio->enabled = false. The next time we acquire the audio resource
such as on hotplug the audio will not be enabled for the stream since
DC thinks it's still enabled.
Audio state tracking should cover this sequence.
[How]
Set audio->enabled = false at the start as long as we have
pipe_ctx->stream_res.audio.
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Zhan Liu <Zhan.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ido Schimmel says:
====================
selftests: forwarding: GRE multipath fixes
Patch #1 ensures IPv4 forwarding is enabled during the test.
Patch #2 fixes the flower filters used to measure the distribution of
the traffic between the two nexthops, so that the test will pass
regardless if traffic is offloaded or not.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The TC filters used in the test do not work with veth devices because the
outer Ethertype is 802.1Q and not IPv4. The test passes with mlxsw
netdevs since the hardware always looks at "The first Ethertype that
does not point to either: VLAN, CNTAG or configurable Ethertype".
Fix this by matching on the VLAN ID instead, but on the ingress side.
The reason why this is not performed at egress is explained in the
commit cited below.
Fixes: 541ad323db ("selftests: forwarding: gre_multipath: Update next-hop statistics match criteria")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Tested-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test did not enable IPv4 forwarding during its setup phase, which
causes the test to fail on machines where IPv4 forwarding is disabled.
Fixes: 54818c4c4b ("selftests: forwarding: Test multipath tunneling")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Tested-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
i.MX fixes for 5.3:
- Fix i.MX8MM SAI3 RXC/TXFS pinmux configuration.
- Fix i.MX7ULP usb-phy unit address to drop extra '0x' notation.
- Fix typo of clock frequency property name in a few i.MX6UL board
I2C buses.
- Drop "fsl,imx6sx-sai" from i.MX8M SAI device, as it's not compatible
with i.MX6SX SAI.
* tag 'imx-fixes-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mq: fix SAI compatible
arm64: dts: imx8mm: Correct SAI3 RXC/TXFS pin's mux option #1
ARM: dts: imx6ul: fix clock frequency property name of I2C buses
ARM: dts: imx7ulp: Fix usb-phy unit address format
Link: https://lore.kernel.org/r/20190723090827.GU15632@dragon
Signed-off-by: Olof Johansson <olof@lixom.net>
This enables the new or updates driver options for U8500
that got merged into v5.3-rc1:
- CMA, MCDE driver, LIMA driver and the Samsung S6D16D0 driver
enabled by default bringing up the new graphics support.
Include the LOGO so we can see when the graphics are live.
- We use the IIO hwmon bridge for reflecting temperature
in the system.
- Set MUSB to PIO mode as this is the one working most stable
for the time being.
- HWSPINLOCK needs to be set to get the hardware semaphore
driver to compile and link properly.
Link: https://lore.kernel.org/r/20190723081523.13079-2-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
When building a multiplatform kernel that includes armv4 support,
the default target CPU does not support the blx instruction,
which leads to a build failure:
arch/arm/mach-davinci/sleep.S: Assembler messages:
arch/arm/mach-davinci/sleep.S:56: Error: selected processor does not support `blx ip' in ARM mode
Add a .arch statement in the sources to make this file build.
Link: https://lore.kernel.org/r/20190722145211.1154785-1-arnd@arndb.de
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
This reverts commit 0298d54352.
With this patch, set 'poll_queues > hard queues' will lead to 'nr_read_queues = 0'
in nvme_calc_irq_sets. Then poll_queues setting can fail since dev->tagset.nr_maps
equals to 2 and nvme_pci_map_queues will not do map for poll queues.
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When freeing the subsystem after finding another match with
__nvme_find_get_subsystem(), use put_device() instead of
__nvme_release_subsystem() which calls kfree() directly.
Per the documentation, put_device() should always be used
after device_initialization() is called. Otherwise, leaks
like the one below which was detected by kmemleak may occur.
Once the call of __nvme_release_subsystem() is removed it no
longer makes sense to keep the helper, so fold it back
into nvme_release_subsystem().
unreferenced object 0xffff8883d12bfbc0 (size 16):
comm "nvme", pid 2635, jiffies 4294933602 (age 739.952s)
hex dump (first 16 bytes):
6e 76 6d 65 2d 73 75 62 73 79 73 32 00 88 ff ff nvme-subsys2....
backtrace:
[<000000007d8fc208>] __kmalloc_track_caller+0x16d/0x2a0
[<0000000081169e5f>] kvasprintf+0xad/0x130
[<0000000025626f25>] kvasprintf_const+0x47/0x120
[<00000000fa66ad36>] kobject_set_name_vargs+0x44/0x120
[<000000004881f8b3>] dev_set_name+0x98/0xc0
[<000000007124dae3>] nvme_init_identify+0x1995/0x38e0
[<000000009315020a>] nvme_loop_configure_admin_queue+0x4fa/0x5e0
[<000000001a63e766>] nvme_loop_create_ctrl+0x489/0xf80
[<00000000a46ecc23>] nvmf_dev_write+0x1a12/0x2220
[<000000002259b3d5>] __vfs_write+0x66/0x120
[<000000002f6df81e>] vfs_write+0x154/0x490
[<000000007e8cfc19>] ksys_write+0x10a/0x240
[<00000000ff5c7b85>] __x64_sys_write+0x73/0xb0
[<00000000fee6d692>] do_syscall_64+0xaa/0x470
[<00000000997e1ede>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes: ab9e00cc72 ("nvme: track subsystems")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The ADATA SX6000LNP NVMe SSDs have the same subnqn and, due to this, a
system with more than one of these SSDs will only have one usable.
[ 0.942706] nvme nvme1: ignoring ctrl due to duplicate subnqn (nqn.2018-05.com.example:nvme:nvm-subsystem-OUI00E04C).
[ 0.943017] nvme nvme1: Removing after probe failure status: -22
02:00.0 Non-Volatile memory controller [0108]: Realtek Semiconductor Co., Ltd. Device [10ec:5762] (rev 01)
71:00.0 Non-Volatile memory controller [0108]: Realtek Semiconductor Co., Ltd. Device [10ec:5762] (rev 01)
There are no firmware updates available from the vendor, unfortunately.
Applying the NVME_QUIRK_IGNORE_DEV_SUBNQN quirk for these SSDs resolves
the issue, and they all work after this patch:
/dev/nvme0n1 2J1120050420 ADATA SX6000LNP [...]
/dev/nvme1n1 2J1120050540 ADATA SX6000LNP [...]
Signed-off-by: Misha Nasledov <misha@nasledov.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We currently have cases where the dma_addressing_limited() gets
called with dma_mask unset. This causes a NULL pointer dereference.
Use dma_get_mask() accessor to prevent the crash.
Fixes: b866455423 ("dma-mapping: add a dma_addressing_limited helper")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
AMD IOMMU requires IntCapXT registers to be setup in order to generate
its own interrupts (for Event Log, PPR Log, and GA Log) with 32-bit
APIC destination ID. Without this support, AMD IOMMU MSI interrupts
will not be routed correctly when booting the system in X2APIC mode.
Cc: Joerg Roedel <joro@8bytes.org>
Fixes: 90fcffd9cf ('iommu/amd: Add support for IOMMU XT mode')
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Building with clang and KASAN, we get a warning about an overly large
stack frame on 32-bit architectures:
drivers/block/drbd/drbd_receiver.c:921:31: error: stack frame size of 1280 bytes in function 'conn_connect'
[-Werror,-Wframe-larger-than=]
We already allocate other data dynamically in this function, so
just do the same for the shash descriptor, which makes up most of
this memory.
Link: https://lore.kernel.org/lkml/20190617132440.2721536-1-arnd@arndb.de/
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Roland Kammerer <roland.kammerer@linbit.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_mq_sched_completed_request is a function that checks if the elevator
related to the request has started_request implemented, but currently, none of
the available IO schedulers implement started_request, so remove both.
Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
put_device will call ac97_codec_release to free
ac97_codec_device and other resources, so remove the kfree
and other redundant code.
Fixes: 74426fbff6 ("ALSA: ac97: add an ac97 bus")
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When perf_add_probe_events() we call cleanup_perf_probe_events() for the
pev pointer it receives, then, as part of handling this failure the main
'perf probe' goes on and calls cleanup_params() and that will again call
cleanup_perf_probe_events()for the same pointer, so just set nevents to
zero when handling the failure of perf_add_probe_events() to avoid the
double free.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-x8qgma4g813z96dvtw9w219q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that, when perf_add_probe_events() fails, like in:
# perf probe icmp_rcv:64 "type=icmph->type"
Failed to find 'icmph' in this function.
Error: Failed to add events.
Segmentation fault (core dumped)
#
We don't segfault.
clear_perf_probe_event() was zeroing the whole pev, and since the switch
to zfree() for the members in the pev, that memset() was removed, which
left nargs with its original value, in the above case 1.
With the memset the same pev could be passed to clear_perf_probe_event()
multiple times, since all it would have would be zeroes, and free()
accepts zero, the loop would not happen and we would just memset it
again to zeroes.
Without it we got that segfault, so zero nargs to keep it like it was,
next cset will avoid calling clear_perf_probe_event() for the same pevs
in case of failure.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: d8f9da2404 ("perf tools: Use zfree() where applicable")
Link: https://lkml.kernel.org/n/tip-802f2jypnwqsvyavvivs8464@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix decompression failure found during the loading of compressed trace
collected on larger scale systems (>48 cores).
The error happened due to lack of decompression space for a mmaped
buffer data chunk split across adjacent PERF_RECORD_COMPRESSED records.
$ perf report -i bt.16384.data --stats
failed to decompress (B): 63869 -> 0 : Destination buffer is too small
user stack dump failure
Can't parse sample, err = -14
0x2637e436 [0x4080]: failed to process type: 9
Error:
failed to process sample
$ perf test 71
71: Zstd perf.data compression/decompression : Ok
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/4d839e1b-9c48-89c4-9702-a12217420611@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The "stalled cycles per insn" is appended to "instructions" when the CPU
has this hardware counter directly. We should always make it a separate
line, which also aligns to the output when we hit the "if (total &&
avg)" branch.
Before:
$ sudo perf stat --all-cpus --field-separator , --log-fd 1 -einstructions,cycles -- sleep 1
4565048704,,instructions,64114578096,100.00,1.34,insn per cycle,,
3396325133,,cycles,64146628546,100.00,,
After:
$ sudo ./tools/perf/perf stat --all-cpus --field-separator , --log-fd 1 -einstructions,cycles -- sleep 1
6721924,,instructions,24026790339,100.00,0.22,insn per cycle
,,,,,0.00,stalled cycles per insn
30939953,,cycles,24025512526,100.00,,
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20190517221039.8975-1-xiyou.wangcong@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Numfor Mbiziwo-Tiapo reported segfault on stat of event group in repeat
mode:
# perf stat -e '{cycles,instructions}' -r 10 ls
It's caused by memory corruption due to not cleaned evsel's id array and
index, which needs to be rebuilt in every stat iteration. Currently the
ids index grows, while the array (which is also not freed) has the same
size.
Fixing this by releasing id array and zeroing ids index in
perf_evsel__close function.
We also need to keep the evsel_list alive for stat record (which is
disabled in repeat mode).
Reported-by: Numfor Mbiziwo-Tiapo <nums@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Drayton <mbd@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190715142121.GC6032@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
