The function finds Nth set CPU in a given cpumask starting from a given
node.
Leveraging the fact that each hop in sched_domains_numa_masks includes the
same or greater number of CPUs than the previous one, we can use binary
search on hops instead of linear walk, which makes the overall complexity
of O(log n) in terms of number of cpumask_weight() calls.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce cpumask_nth_and_andnot() based on find_nth_and_andnot_bit().
It's used in the following patch to traverse cpumasks without storing
intermediate result in temporary cpumask.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the following patches the function is used to implement in-place bitmaps
traversing without storing intermediate result in temporary bitmaps.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case FW is publishing a string which isn't found in the driver's
string DBs, keep the string as raw data.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In case a new string DB is added to the FW, the FW publishes an event
notifying the strings DB have updated.
Add support in driver for handling this event.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Device can expose string DB of size 0 which means this string DB is
currently not in use. Therefore, allow for 0 size string DBs.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The debug message specify tdsn, but takes as an argument the
tmsn. The correct argument is tmsn, hence, fix the print.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
size is being reassigned in the line after.
remove the redundant assignment.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Local variable "err" is not used so it is safe to remove.
Signed-off-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In the cited commit, shared buffer updates were added whenever
port buffer gets updated.
However, in case the shared buffer update fails, exiting early from
port_set_buffer() is performed without freeing previously-allocated memory.
Fix it by jumping to out label where memory is freed before returning
with error.
Fixes: a440030d89 ("net/mlx5e: Update shared buffer along with device buffer changes")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Remove the NULL check on debugfs_create_dir() return value as the
function returns an ERR pointer on failure, not NULL.
The check is not replaced with a IS_ERR_OR_NULL() as
debugfs_create_file(), and debugfs functions in general don't need error
checking.
Fixes: 0fedee1ae9 ("net/mlx5e: kTLS, Add debugfs")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Remove the NULL check on debugfs_create_dir() return value as the
function returns an ERR pointer on failure, not NULL.
The check is not replaced with a IS_ERR_OR_NULL() as
debugfs_create_file(), and debugfs functions in general don't need error
checking.
Fixes: 0e414518d6 ("net/mlx5e: Add hairpin debugfs files")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
vport_number and other_vport being reassigned outside the if clause anyway.
remove the redundant assignment.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Remove unused code which was used only with deprecated HW
which didn't support vlan actions.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
remove_flow_enable event isn't really needed as it will be
triggered once user and/or XFRM core explicitly asked to delete
state. In such situation, we won't be interested in any event
at all.
So don't trigger and listen to remove_flow_enable event.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In case where after reset the PCI link is not ready within timeout, skip
reading device ID as if there is no PCI link up we can't have FW
response to pci config cycles either.
This also fixes err value not used and overwritten in such flow.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Commit 90e7cb78b8 ("net/mlx5: fix missing mutex_unlock in
mlx5_fw_fatal_reporter_err_work()") introduced another checking of
MLX5_DROP_HEALTH_NEW_WORK. At this point, the first check of
MLX5_DROP_HEALTH_NEW_WORK is redundant and so is the lock that
protects it.
Remove the lock and rename MLX5_DROP_HEALTH_NEW_WORK to reflect these
changes.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Clang warns about excessive stack usage on 32-bit targets:
drivers/net/ethernet/mellanox/mlx5/core/en_main.c:3597:12: error: stack frame size (1184) exceeds limit (1024) in 'mlx5e_setup_tc' [-Werror,-Wframe-larger-than]
static int mlx5e_setup_tc(struct net_device *dev, enum tc_setup_type type,
It turns out that both the mlx5e_setup_tc_mqprio_dcb() function and
the mlx5e_safe_switch_params() function it calls have a copy of
'struct mlx5e_params' on the stack, and this structure is fairly
large.
Use dynamic allocation for the inner one.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
rxrpc_recvmsg_data() schedules an ACK to be transmitted every time at least
two packets have been consumed and any time it runs out of data and would
return -EAGAIN to the caller. Both events may occur within a single loop,
however, and if the I/O thread is quick enough it may send duplicate ACKs.
The ACKs are sent to inform the peer that more space has been made in the
local Rx window, but the I/O thread is going to send an ACK every couple of
DATA packets anyway, so we end up sending a lot more ACKs than we really
need to.
So reduce the rate at which recvmsg() schedules ACKs, such that if the I/O
thread sends ACKs at its normal faster rate, recvmsg() won't actually
schedule ACKs until the Rx flow stops (call->rx_consumed is cleared any
time we transmit an ACK for that call, resetting the counter used by
recvmsg).
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
If an rxrpc call is given a poke, it will get woken up unconditionally,
even if there's already a poke pending (for which there will have been a
wake) or if the call refcount has gone to 0.
Fix this by only waking the call if it is still referenced and if it
doesn't already have a poke pending.
Fixes: 15f661dc95 ("rxrpc: Implement a mechanism to send an event notification to a call")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Pull devicetree fixes from Rob Herring:
- Fix handling of multiple OF framebuffer devices
- Fix booting on Socionext Synquacer with bad 'dma-ranges' entries
- Add DT binding .yamllint to .gitignore
* tag 'devicetree-fixes-for-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: interrupt-controller: arm,gic-v3: Fix typo in description of msi-controller property
dt-bindings: Fix .gitignore
of/address: Return an error when no valid dma-ranges are found
of: Make OF framebuffer device names unique
A passthrough decoder is a decoder that maps only 1 target. It is a
special case because it does not impose any constraints on the
interleave-math as compared to a decoder with multiple targets. Extend
the passthrough case to multi-target-capable decoders that only have one
target selected. I.e. the current code was only considering passthrough
*ports* which are only a subset of the potential passthrough decoder
scenarios.
Fixes: e4f6dfa9ef ("cxl/region: Fix 'distance' calculation with passthrough ports")
Cc: <stable@vger.kernel.org>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/167564540422.847146.13816934143225777888.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Eric Dumazet says:
====================
net: core: use a dedicated kmem_cache for skb head allocs
Our profile data show that using kmalloc(non_const_size)/kfree(ptr)
has a certain cost, because kfree(ptr) has to pull a 'struct page'
in cpu caches.
Using a dedicated kmem_cache for TCP skb->head allocations makes
a difference, both in cpu cycles and memory savings.
This kmem_cache could also be used for GRO skb allocations,
this is left as a future exercise.
====================
Link: https://lore.kernel.org/r/20230206173103.2617121-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recent removal of ksize() in alloc_skb() increased
performance because we no longer read
the associated struct page.
We have an equivalent cost at kfree_skb() time.
kfree(skb->head) has to access a struct page,
often cold in cpu caches to get the owning
struct kmem_cache.
Considering that many allocations are small (at least for TCP ones)
we can have our own kmem_cache to avoid the cache line miss.
This also saves memory because these small heads
are no longer padded to 1024 bytes.
CONFIG_SLUB=y
$ grep skbuff_small_head /proc/slabinfo
skbuff_small_head 2907 2907 640 51 8 : tunables 0 0 0 : slabdata 57 57 0
CONFIG_SLAB=y
$ grep skbuff_small_head /proc/slabinfo
skbuff_small_head 607 624 640 6 1 : tunables 54 27 8 : slabdata 104 104 5
Notes:
- After Kees Cook patches and this one, we might
be able to revert commit
dbae2b0628 ("net: skb: introduce and use a single page frag cache")
because GRO_MAX_HEAD is also small.
- This patch is a NOP for CONFIG_SLOB=y builds.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All kmalloc_reserve() callers have to make the same computation,
we can factorize them, to prepare following patch in the series.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have many places using this expression:
SKB_DATA_ALIGN(sizeof(struct skb_shared_info))
Use of SKB_HEAD_ALIGN() will allow to clean them.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ASoC: Fixes for v6.2
A few more fixes for v6.2, all driver specific and small. It's larger
than is ideal but we can't really control when people find problems.
Pull tracing fix from Steven Rostedt:
"Fix regression in poll() and select()
With the fix that made poll() and select() block if read would block
caused a slight regression in rasdaemon, as it needed that kind of
behavior. Add a way to make that behavior come back by writing zero
into the 'buffer_percentage', which means to never block on read"
* tag 'trace-v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix poll() and select() do not work on per_cpu trace_pipe and trace_pipe_raw
Marc Kleine-Budde says:
====================
pull-request: can-next 2023-02-06
this is a pull request of 47 patches for net-next/master.
The first two patch is by Oliver Hartkopp. One adds missing error
checking to the CAN_GW protocol, the other adds a missing CAN address
family check to the CAN ISO TP protocol.
Thomas Kopp contributes a performance optimization to the mcp251xfd
driver.
The next 11 patches are by Geert Uytterhoeven and add support for
R-Car V4H systems to the rcar_canfd driver.
Stephane Grosjean and Lukas Magel contribute 8 patches to the peak_usb
driver, which add support for configurable CAN channel ID.
The last 17 patches are by me and target the CAN bit timing
configuration. The bit timing is cleaned up, error messages are
improved and forwarded to user space via NL_SET_ERR_MSG_FMT() instead
of netdev_err(), and the SJW handling is updated, including the
definition of a new default value that will benefit CAN-FD
controllers, by increasing their oscillator tolerance.
* tag 'linux-can-next-for-6.3-20230206' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (47 commits)
can: bittiming: can_validate_bitrate(): report error via netlink
can: bittiming: can_calc_bittiming(): convert from netdev_err() to NL_SET_ERR_MSG_FMT()
can: bittiming: can_calc_bittiming(): clean up SJW handling
can: bittiming: can_sjw_set_default(): use Phase Seg2 / 2 as default for SJW
can: bittiming: can_sjw_check(): check that SJW is not longer than either Phase Buffer Segment
can: bittiming: can_sjw_check(): report error via netlink and harmonize error value
can: bittiming: can_fixup_bittiming(): report error via netlink and harmonize error value
can: bittiming: factor out can_sjw_set_default() and can_sjw_check()
can: bittiming: can_changelink() pass extack down callstack
can: netlink: can_changelink(): convert from netdev_err() to NL_SET_ERR_MSG_FMT()
can: netlink: can_validate(): validate sample point for CAN and CAN-FD
can: dev: register_candev(): bail out if both fixed bit rates and bit timing constants are provided
can: dev: register_candev(): ensure that bittiming const are valid
can: bittiming: can_get_bittiming(): use direct return and remove unneeded else
can: bittiming: can_fixup_bittiming(): set effective tq
can: bittiming: can_fixup_bittiming(): use CAN_SYNC_SEG instead of 1
can: bittiming(): replace open coded variants of can_bit_time()
can: peak_usb: Reorder include directives alphabetically
can: peak_usb: align CAN channel ID format in log with sysfs attribute
can: peak_usb: export PCAN CAN channel ID as sysfs device attribute
...
====================
Link: https://lore.kernel.org/r/20230206131620.2758724-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ISO 11783-5 standard, in "4.5.2 - Address claim requirements", states:
d) No CF shall begin, or resume, transmission on the network until 250
ms after it has successfully claimed an address except when
responding to a request for address-claimed.
But "Figure 6" and "Figure 7" in "4.5.4.2 - Address-claim
prioritization" show that the CF begins the transmission after 250 ms
from the first AC (address-claimed) message even if it sends another AC
message during that time window to resolve the address contention with
another CF.
As stated in "4.4.2.3 - Address-claimed message":
In order to successfully claim an address, the CF sending an address
claimed message shall not receive a contending claim from another CF
for at least 250 ms.
As stated in "4.4.3.2 - NAME management (NM) message":
1) A commanding CF can
d) request that a CF with a specified NAME transmit the address-
claimed message with its current NAME.
2) A target CF shall
d) send an address-claimed message in response to a request for a
matching NAME
Taking the above arguments into account, the 250 ms wait is requested
only during network initialization.
Do not restart the timer on AC message if both the NAME and the address
match and so if the address has already been claimed (timer has expired)
or the AC message has been sent to resolve the contention with another
CF (timer is still running).
Signed-off-by: Devid Antonio Filoni <devid.filoni@egluetechnologies.com>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20221125170418.34575-1-devid.filoni@egluetechnologies.com
Fixes: 9d71dd0c70 ("can: add support of SAE J1939 protocol")
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Currently only the network namespace of devlink instance is monitored
for port events. If netdev is moved to a different namespace and then
unregistered, NETDEV_PRE_UNINIT is missed which leads to trigger
following WARN_ON in devl_port_unregister().
WARN_ON(devlink_port->type != DEVLINK_PORT_TYPE_NOTSET);
Fix this by changing the netdev notifier from per-net to global so no
event is missed.
Fixes: 02a68a47ea ("net: devlink: track netdev with devlink_port assigned")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230206094151.2557264-1-jiri@resnulli.us
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We have two IS1 filters of the OCELOT_VCAP_KEY_ANY key type (the one with
"action vlan pop" and the one with "action vlan modify") and one of the
OCELOT_VCAP_KEY_IPV4 key type (the one with "action skbedit priority").
But we have no IS1 filter with the OCELOT_VCAP_KEY_ETYPE key type, and
there was an uncaught breakage there.
To increase test coverage, convert one of the OCELOT_VCAP_KEY_ANY
filters to OCELOT_VCAP_KEY_ETYPE, by making the filter also match on the
MAC SA of the traffic sent by mausezahn, $h1_mac.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230205192409.1796428-2-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Alternative short title: don't instruct the hardware to match on
EtherType with "protocol 802.1Q" flower filters. It doesn't work for the
reasons detailed below.
With a command such as the following:
tc filter add dev $swp1 ingress chain $(IS1 2) pref 3 \
protocol 802.1Q flower skip_sw vlan_id 200 src_mac $h1_mac \
action vlan modify id 300 \
action goto chain $(IS2 0 0)
the created filter is set by ocelot_flower_parse_key() to be of type
OCELOT_VCAP_KEY_ETYPE, and etype is set to {value=0x8100, mask=0xffff}.
This gets propagated all the way to is1_entry_set() which commits it to
hardware (the VCAP_IS1_HK_ETYPE field of the key). Compare this to the
case where src_mac isn't specified - the key type is OCELOT_VCAP_KEY_ANY,
and is1_entry_set() doesn't populate VCAP_IS1_HK_ETYPE.
The problem is that for VLAN-tagged frames, the hardware interprets the
ETYPE field as holding the encapsulated VLAN protocol. So the above
filter will only match those packets which have an encapsulated protocol
of 0x8100, rather than all packets with VLAN ID 200 and the given src_mac.
The reason why this is allowed to occur is because, although we have a
block of code in ocelot_flower_parse_key() which sets "match_protocol"
to false when VLAN keys are present, that code executes too late.
There is another block of code, which executes for Ethernet addresses,
and has a "goto finished_key_parsing" and skips the VLAN header parsing.
By skipping it, "match_protocol" remains with the value it was
initialized with, i.e. "true", and "proto" is set to f->common.protocol,
or 0x8100.
The concept of ignoring some keys rather than erroring out when they are
present but can't be offloaded is dubious in itself, but is present
since the initial commit fe3490e610 ("net: mscc: ocelot: Hardware
ofload for tc flower filter"), and it's outside of the scope of this
patch to change that.
The problem was introduced when the driver started to interpret the
flower filter's protocol, and populate the VCAP filter's ETYPE field
based on it.
To fix this, it is sufficient to move the code that parses the VLAN keys
earlier than the "goto finished_key_parsing" instruction. This will
ensure that if we have a flower filter with both VLAN and Ethernet
address keys, it won't match on ETYPE 0x8100, because the VLAN key
parsing sets "match_protocol = false".
Fixes: 86b956de11 ("net: mscc: ocelot: support matching on EtherType")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230205192409.1796428-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This reverts commit 115d9d77bb.
The pages being freed by memblock_free_late() have already been
initialized, but if they are in the deferred init range,
__free_one_page() might access nearby uninitialized pages when trying to
coalesce buddies. This can, for example, trigger this BUG:
BUG: unable to handle page fault for address: ffffe964c02580c8
RIP: 0010:__list_del_entry_valid+0x3f/0x70
<TASK>
__free_one_page+0x139/0x410
__free_pages_ok+0x21d/0x450
memblock_free_late+0x8c/0xb9
efi_free_boot_services+0x16b/0x25c
efi_enter_virtual_mode+0x403/0x446
start_kernel+0x678/0x714
secondary_startup_64_no_verify+0xd2/0xdb
</TASK>
A proper fix will be more involved so revert this change for the time
being.
Fixes: 115d9d77bb ("mm: Always release pages to the buddy allocator in memblock_free_late().")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Link: https://lore.kernel.org/r/20230207082151.1303-1-dev@aaront.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Frank reports that in a mt7530 setup where some ports are standalone and
some are in a VLAN-aware bridge, 8021q uppers of the standalone ports
lose their VLAN tag on xmit, as seen by the link partner.
This seems to occur because once the other ports join the VLAN-aware
bridge, mt7530_port_vlan_filtering() also calls
mt7530_port_set_vlan_aware(ds, cpu_dp->index), and this affects the way
that the switch processes the traffic of the standalone port.
Relevant is the PVC_EG_TAG bit. The MT7530 documentation says about it:
EG_TAG: Incoming Port Egress Tag VLAN Attribution
0: disabled (system default)
1: consistent (keep the original ingress tag attribute)
My interpretation is that this setting applies on the ingress port, and
"disabled" is basically the normal behavior, where the egress tag format
of the packet (tagged or untagged) is decided by the VLAN table
(MT7530_VLAN_EGRESS_UNTAG or MT7530_VLAN_EGRESS_TAG).
But there is also an option of overriding the system default behavior,
and for the egress tagging format of packets to be decided not by the
VLAN table, but simply by copying the ingress tag format (if ingress was
tagged, egress is tagged; if ingress was untagged, egress is untagged;
aka "consistent). This is useful in 2 scenarios:
- VLAN-unaware bridge ports will always encounter a miss in the VLAN
table. They should forward a packet as-is, though. So we use
"consistent" there. See commit e045124e93 ("net: dsa: mt7530: fix
tagged frames pass-through in VLAN-unaware mode").
- Traffic injected from the CPU port. The operating system is in god
mode; if it wants a packet to exit as VLAN-tagged, it sends it as
VLAN-tagged. Otherwise it sends it as VLAN-untagged*.
*This is true only if we don't consider the bridge TX forwarding offload
feature, which mt7530 doesn't support.
So for now, make the CPU port always stay in "consistent" mode to allow
software VLANs to be forwarded to their egress ports with the VLAN tag
intact, and not stripped.
Link: https://lore.kernel.org/netdev/trinity-e6294d28-636c-4c40-bb8b-b523521b00be-1674233135062@3c-app-gmx-bs36/
Fixes: e045124e93 ("net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode")
Reported-by: Frank Wunderlich <frank-w@public-files.de>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230205140713.1609281-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
