The HDCP feature requires at least one connector attached to the device;
however, some GPUs do not have a physical output, making the HDCP
initialization irrelevant. This patch disables HDCP initialization when
the graphic card does not have output.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Since preempt-to-busy, we may unsubmit a request while it is still on
the HW and completes asynchronously. That means it may be retired and in
the process destroy the virtual engine (as the user has closed their
context), but that engine may still be holding onto the unsubmitted
compelted request. Therefore we need to potentially cleanup the old
request on destroying the virtual engine. We also have to keep the
virtual_engine alive until after the sibling's execlists_dequeue() have
finished peeking into the virtual engines, for which we serialise with
RCU.
v2: Be paranoid and flush the tasklet as well.
v3: And flush the tasklet before the engines, as the tasklet may
re-attach an rb_node after our removal from the siblings.
Fixes: 6d06779e86 ("drm/i915: Load balancing across a virtual engine")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201123113717.20500-4-chris@chris-wilson.co.uk
(cherry picked from commit 46eecfccb4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The UVD firmware is copied to cpu addr in uvd_resume, so it
should be used after that. This is to fix a bug introduced by
patch drm/amdgpu: fix SI UVD firmware validate resume fail.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org
The SI UVD firmware validate key is stored at the end of firmware,
which is changed during resume while playing video. So get the key
at sw_init and store it for fw validate using.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Move the register slow register write and readback from out of the
critical path for execlists submission and delay it until the following
worker, shaving off around 200us. Note that the same signal_irq_work() is
allowed to run concurrently on each CPU (but it will only be queued once,
once running though it can be requeued and reexecuted) so we have to
remember to lock the global interactions as we cannot rely on the
signal_irq_work() itself providing the serialisation (in constrast to a
tasklet).
By pushing the arm/disarm into the central signaling worker we can close
the race for disarming the interrupt (and dropping its associated
GT wakeref) on parking the engine. If we loose the race, that GT wakeref
may be held indefinitely, preventing the machine from sleeping while
the GPU is ostensibly idle.
v2: Move the self-arming parking of the signal_irq_work to a flush of
the irq-work from intel_breadcrumbs_park().
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2271
Fixes: e23005604b ("drm/i915/gt: Hold context/request reference while breadcrumbs are active")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201123113717.20500-1-chris@chris-wilson.co.uk
(cherry picked from commit 9d5612ca16)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
After having written the entire OA buffer with reports, the HW will
write again at the beginning of the OA buffer. It'll indicate it by
setting the WRAP bits in the OASTATUS register.
When a wrap happens and that at the end of the read vfunc we write the
OASTATUS register back to clear the REPORT_LOST bit, we sometimes see
that the OATAILPTR register is reset to a previous position on Gen8/9
(apparently not the case on Gen11+). This leads the next call to the
read vfunc to process reports we've already read. Because we've marked
those as read by clearing the reason & timestamp dwords, they're
discarded and a "Skipping spurious, invalid OA report" message is
emitted.
The workaround to avoid this OATAILPTR value reset seems to be to set
the wrap bits when writing back OASTATUS.
This change has no impact on userspace, it only avoids a bunch of
DRM_NOTE("Skipping spurious, invalid OA report\n") messages.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 19f81df285 ("drm/i915/perf: Add OA unit support for Gen 8+")
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117130124.829979-1-lionel.g.landwerlin@intel.com
(cherry picked from commit 059a0beb48)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This driver uses a normal timer for TX coalescing, which means that the
with the default tx-usecs of 1000 microseconds the cleanups actually
happen 10 ms or more later with HZ=100. This leads to very low
througput with TCP when bridged to a slow link such as a 4G modem. Fix
this by using an hrtimer instead.
On my ARM platform with HZ=100 and the default TX coalescing settings
(tx-frames 25 tx-usecs 1000), with "tc qdisc add dev eth0 root netem
delay 60ms 40ms rate 50Mbit" run on the server, netperf's TCP_STREAM
improves from ~5.5 Mbps to ~100 Mbps.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20201120150208.6838-1-vincent.whitchurch@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactoring "PF still resetting" and changing "Failed
to add vlan id" to "Vlan id is not added"
messages because previous version looked like a bug
- it informed about changes that worked as
designed but might confuse users
Signed-off-by: Karen Sornek <karen.sornek@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When the virtual link state was set to "enable" ethtool would report
link speed as 40000Mb/s regardless of the underlying device.
Report the correct link speed.
Example from a XXV710 NIC.
Before:
$ ip link set ens3f0 vf 0 state auto
$ ethtool enp8s2 | grep Speed
Speed: 25000Mb/s
$ ip link set ens3f0 vf 0 state enable
$ ethtool enp8s2 | grep Speed
Speed: 40000Mb/s
After:
$ ip link set ens3f0 vf 0 state auto
$ ethtool enp8s2 | grep Speed
Speed: 25000Mb/s
$ ip link set ens3f0 vf 0 state enable
$ ethtool enp8s2 | grep Speed
Speed: 25000Mb/s
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Remove a redundant assignment of the software ring pointer in the i40e
driver. The variable is assigned twice with no use in between, so just
get rid of the first occurrence.
Fixes: 3b4f0b66c2 ("i40e, xsk: Migrate to new MEM_TYPE_XSK_BUFF_POOL")
Signed-off-by: Marek Majtyka <marekx.majtyka@intel.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
We call arch_cpu_idle() with RCU disabled, but then use
local_irq_{en,dis}able(), which invokes tracing, which relies on RCU.
Switch all arch_cpu_idle() implementations to use
raw_local_irq_{en,dis}able() and carefully manage the
lockdep,rcu,tracing state like we do in entry.
(XXX: we really should change arch_cpu_idle() to not return with
interrupts enabled)
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lkml.kernel.org/r/20201120114925.594122626@infradead.org
In rtl8723e_tx_fill_cmddesc(), skb->data is mapped to streaming DMA on
line 531:
dma_addr_t mapping = dma_map_single(..., skb->data, ...);
On line 534, skb->data is assigned to hdr after cast:
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)(skb->data);
Then hdr->frame_control is accessed on line 535:
__le16 fc = hdr->frame_control;
This DMA access may cause data inconsistency between CPU and hardwre.
To fix this bug, hdr->frame_control is accessed before the DMA mapping.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201119015218.12220-1-baijiaju1990@gmail.com
In rtl92de_tx_fill_cmddesc(), skb->data is mapped to streaming DMA on
line 667:
dma_addr_t mapping = dma_map_single(..., skb->data, ...);
On line 669, skb->data is assigned to hdr after cast:
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)(skb->data);
Then hdr->frame_control is accessed on line 670:
__le16 fc = hdr->frame_control;
This DMA access may cause data inconsistency between CPU and hardwre.
To fix this bug, hdr->frame_control is accessed before the DMA mapping.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201119015205.12162-1-baijiaju1990@gmail.com
In rtl92ce_tx_fill_cmddesc(), skb->data is mapped to streaming DMA on
line 530:
dma_addr_t mapping = dma_map_single(..., skb->data, ...);
On line 533, skb->data is assigned to hdr after cast:
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)(skb->data);
Then hdr->frame_control is accessed on line 534:
__le16 fc = hdr->frame_control;
This DMA access may cause data inconsistency between CPU and hardwre.
To fix this bug, hdr->frame_control is accessed before the DMA mapping.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201119015151.12110-1-baijiaju1990@gmail.com
In rtl88ee_tx_fill_cmddesc(), skb->data is mapped to streaming DMA on
line 677:
dma_addr_t mapping = dma_map_single(..., skb->data, ...);
On line 680, skb->data is assigned to hdr after cast:
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)(skb->data);
Then hdr->frame_control is accessed on line 681:
__le16 fc = hdr->frame_control;
This DMA access may cause data inconsistency between CPU and hardwre.
To fix this bug, hdr->frame_control is accessed before the DMA mapping.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201119015127.12033-1-baijiaju1990@gmail.com
ezusb_read_ltv() is always invoked via the ->read_ltv() callback. This
callback is mostly invoked under orinoco_lock() which disables BH.
There are a few invocations during probe which occur in preemptible
context via:
ezusb_probe() -> orinoco_init() -> determine_fw_capabilities()
Extend `hermes_ops' with the ->read_ltv_pr callback which is implemented
with the same callback like ->read_ltv on `hermes_ops_local'.
On `ezusb_ops' ->read_ltv is used for callbacks under the lock which
need to poll.
The new ->read_ltv_pr() is used in the preemptible context in which it
is possible to wait for the completion. Provide HERMES_READ_RECORD_PR()
and hermes_read_wordrec_pr() which behave like their non _pr equivalents
and invoke ->read_ltv_pr().
This removes the last user of ezusb_req_ctx_wait() and can now be
removed.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201113212252.2243570-11-bigeasy@linutronix.de
ezusb_doicmd_wait() is invoked via ->init_cmd_wait() callback.
This callback is only invoked hermesi_program_init() and
hermesi_program_end() which are the ->program_init() and ->program_end()
callbacks as assigned by `hermes_ops_local'. They are never used by the
USB interface since the USB interface provides its own set of callbacks
by `ezusb_ops'.
Replace ezusb_doicmd_wait() with a warning in case I missed the obvious.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201113212252.2243570-9-bigeasy@linutronix.de
The ezusb_program() is invoked via ->program() in preemptible
context during firmware loading. This is also true for the
->program_init() and ->program_end() callback.
Use ezusb_req_ctx_wait_compl() in ezusb_program_init(),
ezusb_program_bytes(), ezusb_program_end() which are part of firmware
loading during device probe.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201113212252.2243570-6-bigeasy@linutronix.de
ezusb_init() is always invoked in preemptible context during device
probe. Only orinoco_up() -> orinoco_reinit_firmware() may invoke the
function from atomic context but this is never used for the USB
interface.
Use ezusb_req_ctx_wait_compl() for the ezusb_write_ltv() and
ezusb_docmd_wait() invocations from within ezusb_init().
Preserve the generic versions which have still other user via the
callback.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201113212252.2243570-5-bigeasy@linutronix.de
ezusb_access_ltv() sends the prepared request to the USB device.
Requests which have ->in_rid set expect an answer from the USB device
and the function has to wait until the URB with the answer arrives.
The function uses in_interrupt() to determine if it can simply sleep on
the completion and be woken up once the answer arrives or if it needs to
poll on the completion.
The usage of in_interrupt() in drivers is phased out and Linus clearly
requested that code which changes behaviour depending on context should
either be separated or the context be conveyed in an argument passed by the
caller, which usually knows the context.
Aside of that in_interrupt() is not correct as it does not catch preempt
disabled regions in which sleeping is also not allowed.
Provide stubs which can be used as a replacement. The current default is
the current behaviour which sleeps/polls depending on in_interrupt().
The goal is to audit all callers and use either the poll or sleep
version.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201113212252.2243570-3-bigeasy@linutronix.de
ezusb_xmit() allocates a context which is leaked if
orinoco_process_xmit_skb() returns an error.
Move ezusb_alloc_ctx() after the invocation of
orinoco_process_xmit_skb() because the context is not needed so early.
ezusb_access_ltv() will cleanup the context in case of an error.
Fixes: bac6fafd4d ("orinoco: refactor xmit path")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20201113212252.2243570-2-bigeasy@linutronix.de
iov_iter::type is a bitmask that also keeps direction etc., so it
shouldn't be directly compared against ITER_*. Use proper helper.
Fixes: ff6165b2d7 ("io_uring: retain iov_iter state over io_read/io_write calls")
Reported-by: David Howells <dhowells@redhat.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Cc: <stable@vger.kernel.org> # 5.9
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Abaci Fuzz reported a shift-out-of-bounds BUG in io_uring_create():
[ 59.598207] UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13
[ 59.599665] shift exponent 64 is too large for 64-bit type 'long unsigned int'
[ 59.601230] CPU: 0 PID: 963 Comm: a.out Not tainted 5.10.0-rc4+ #3
[ 59.602502] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[ 59.603673] Call Trace:
[ 59.604286] dump_stack+0x107/0x163
[ 59.605237] ubsan_epilogue+0xb/0x5a
[ 59.606094] __ubsan_handle_shift_out_of_bounds.cold+0xb2/0x20e
[ 59.607335] ? lock_downgrade+0x6c0/0x6c0
[ 59.608182] ? rcu_read_lock_sched_held+0xaf/0xe0
[ 59.609166] io_uring_create.cold+0x99/0x149
[ 59.610114] io_uring_setup+0xd6/0x140
[ 59.610975] ? io_uring_create+0x2510/0x2510
[ 59.611945] ? lockdep_hardirqs_on_prepare+0x286/0x400
[ 59.613007] ? syscall_enter_from_user_mode+0x27/0x80
[ 59.614038] ? trace_hardirqs_on+0x5b/0x180
[ 59.615056] do_syscall_64+0x2d/0x40
[ 59.615940] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 59.617007] RIP: 0033:0x7f2bb8a0b239
This is caused by roundup_pow_of_two() if the input entries larger
enough, e.g. 2^32-1. For sq_entries, it will check first and we allow
at most IORING_MAX_ENTRIES, so it is okay. But for cq_entries, we do
round up first, that may overflow and truncate it to 0, which is not
the expected behavior. So check the cq size first and then do round up.
Fixes: 88ec3211e4 ("io_uring: round-up cq size before comparing with rounded sq size")
Reported-by: Abaci Fuzz <abaci@linux.alibaba.com>
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If set active without increase the usage count of pm, the dont use
autosuspend function will call the suspend callback to close the two
clocks of spi because the usage count is reduced to -1.
This will cause the warning dump below when the defer-probe occurs.
[ 129.379701] ecspi2_root_clk already disabled
[ 129.384005] WARNING: CPU: 1 PID: 33 at drivers/clk/clk.c:952 clk_core_disable+0xa4/0xb0
So add the get noresume function before set active.
Fixes: 43b6bf406c spi: imx: fix runtime pm support for !CONFIG_PM
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Link: https://lore.kernel.org/r/20201124085247.18025-1-xiaoning.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
