Add API log_wakeup_reason() and expose it to userspace via sysfs path
/sys/kernel/wakeup_reasons/last_resume_reason
Change-Id: I81addaf420f1338255c5d0638b0d244a99d777d1
Signed-off-by: Ruchi Kandoi <kandoiruchi@google.com>
Adds a new trace event to be called from clk_set_parent. Some
cpufreq drivers, including Tegra, reparent the cpu clock to a
slower clock while the main pll is relocking, tracing
clk_set_parent allows traces to show how for long the cpu is
running slower.
Uses a separate TRACE_EVENT instead of the clock event class to
allow the event to contain string names for the child and the
parent.
Signed-off-by: Colin Cross <ccross@android.com>
Add ftrace event trace_sched_cpu_hotplug to track cpu
hot-add and hot-remove events.
This is useful in a variety of power, performance and
debug analysis scenarios.
Change-Id: I5d202c7a229ffacc3aafb7cf9afee0b0ee7b0931
Signed-off-by: Arun Bharadwaj <abharadw@codeaurora.org>
Add tracepoints to record the start and end of each mmc block
operation. This includes read, write, erase, secure erase,
trim, secure trim1 and secure trim 2, discard and
sanitize commands.
Change-Id: Ic5d1cbdb9adb940d8b1a2a13c73970023575df50
Signed-off-by: Ken Sumrall <ksumrall@android.com>
This change fixes the how the gpu_sched_switch timestamp field is formatted.
Signed-off-by: Jamie Gennis <jgennis@google.com>
Change-Id: I273234935254ed15772c9e561c9af20e480004ae
Userspace can close the sync device while there are still active fence
points, in which case kernel produces the following warning:
[ 43.853176] ------------[ cut here ]------------
[ 43.857834] WARNING: CPU: 0 PID: 892 at /mnt/host/source/src/third_party/kernel/v3.18/drivers/staging/android/sync.c:439 android_fence_release+0x88/0x104()
[ 43.871741] CPU: 0 PID: 892 Comm: Binder_5 Tainted: G U 3.18.0-07661-g0550ce9 #1
[ 43.880176] Hardware name: Google Tegra210 Smaug Rev 1+ (DT)
[ 43.885834] Call trace:
[ 43.888294] [<ffffffc000207464>] dump_backtrace+0x0/0x10c
[ 43.893697] [<ffffffc000207580>] show_stack+0x10/0x1c
[ 43.898756] [<ffffffc000ab1258>] dump_stack+0x74/0xb8
[ 43.903814] [<ffffffc00021d414>] warn_slowpath_common+0x84/0xb0
[ 43.909736] [<ffffffc00021d530>] warn_slowpath_null+0x14/0x20
[ 43.915482] [<ffffffc00088aefc>] android_fence_release+0x84/0x104
[ 43.921582] [<ffffffc000671cc4>] fence_release+0x104/0x134
[ 43.927066] [<ffffffc00088b0cc>] sync_fence_free+0x74/0x9c
[ 43.932552] [<ffffffc00088b128>] sync_fence_release+0x34/0x48
[ 43.938304] [<ffffffc000317bbc>] __fput+0x100/0x1b8
[ 43.943185] [<ffffffc000317cc8>] ____fput+0x8/0x14
[ 43.947982] [<ffffffc000237f38>] task_work_run+0xb0/0xe4
[ 43.953297] [<ffffffc000207074>] do_notify_resume+0x44/0x5c
[ 43.958867] ---[ end trace 5a2aa4027cc5d171 ]---
Let's fix it by introducing a new optional callback (disable_signaling)
to fence operations so that drivers can do proper clean ups when we
remove last callback for given fence.
BUG=chrome-os-partner:40303
TEST=Boot Smaug and observe that warning is gone.
Change-Id: I05c34dcf74438c28405438c7ead0706b1f810fff
Signed-off-by: Dmitry Torokhov <dtor@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/303409
Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Quirks specify common behaviors that vary slightly among devices, and
which ADF must account for.
The buffer padding quirk captures the way different devices fetch the
last scanline in a buffer: some devices fetch an entire line (including
padding to the pitch) while others only fetch up to the visible width.
ADF's buffer size validation now takes this quirk into account.
Change-Id: I828b13316e27621d8a9efd9d5fffa6ce12a525ff
Signed-off-by: Greg Hackmann <ghackmann@google.com>
64-bit types in structs create alignment problems when a 32-bit x86
userspace talks to an x86_64 kernel. In most cases the 64-bit types can
be replaced with 32-bit ones, since they're being used for fds and
should have been __s32 in the first place. For adf_vsync_event,
alignment can be enforced by making the timestamp an __aligned_u64.
Change-Id: I87cf73d8f57730bd7bb43ffce6b7b411eb0ff198
Signed-off-by: Greg Hackmann <ghackmann@google.com>
A device's fb_info is shared between clients. fb_release() is called
when each client is released, not just the last one. Since the fbdev
helper needs to release its dma-buf when the last client goes away, it
must keep its own reference count.
fbmem and fbcon hold different locks while calling fb_release(), so
explicit locking is needed.
Change-Id: I42cd659f7633adba7c11f407d4b594bd43305d6a
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Device-custom ADF ioctls can use type ADF_IOCTL_TYPE and
nr >= ADF_IOCTL_NR_CUSTOM
Change-Id: Ia8270973df5100e996ca0e021ede60e54b9af72a
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Userspace-facing ADF_MAX_ATTACHMENTS must be in terms of
userspace-facing struct adf_attachment_config
Change-Id: Iaaddcd6366f13b3e52eb3911efcfff8a61e0b225
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Systems may define PAGE_SIZE in userspace limits.h but don't have to.
PAGE_SIZE was picked as an arbitrary "reasonable" limit so just use 4096
instead.
Change-Id: I9555e39aba64a3a70f61eb6ded2a4129ab236ce0
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Many custom formats look a lot like the standard ones, but with
different subsampling, bpp, etc. Expose and document
adf_buffer_validate()'s main body, so drivers can reuse its logic when
validating these formats.
Change-Id: I1d06981c9e5aab26f3ab2956c08c679f2c823bcc
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Informational flags don't affect ADF directly but may be useful to
clients. Currently used to indicate primary and external displays.
Change-Id: I343c7f0148da0869244c8e818350e9855525df85
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Simple buffers are linear RGB buffers analogous to KMS's dumb buffers.
Simple buffers can be allocated and posted to a display interface
without any driver-private data.
Internally, ADF drivers provide the driver-private data needed (if any)
to post a simple buffer to the display.
Change-Id: Ib0b737622eaf343111310f6623f99d69cf3807d2
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Provides a dma-buf exporter for memblocks, mainly useful for ADF devices
to wrap their bootloader logos
Change-Id: I936a9b5df099ab6084d433fcaf50f3bc29f93289
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Tracing adds actual speed since this is expected to be key to the
choice of target speed.
Change-Id: Iec936102d0010c4e9dfa143c38a9fd0d551189c3
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Not useful to have a separate, non-realtime workqueue for speed down
events, avoid priority inversion for speed up events.
Change-Id: Iddcd05545245c847aa1bbe0b8790092914c813d2
Signed-off-by: Todd Poynor <toddpoynor@google.com>
This governor is designed for latency-sensitive workloads, such as
interactive user interfaces. The interactive governor aims to be
significantly more responsive to ramp CPU quickly up when CPU-intensive
activity begins.
Existing governors sample CPU load at a particular rate, typically
every X ms. This can lead to under-powering UI threads for the period of
time during which the user begins interacting with a previously-idle system
until the next sample period happens.
The 'interactive' governor uses a different approach. Instead of sampling
the CPU at a specified rate, the governor will check whether to scale the
CPU frequency up soon after coming out of idle. When the CPU comes out of
idle, a timer is configured to fire within 1-2 ticks. If the CPU is very
busy from exiting idle to when the timer fires then we assume the CPU is
underpowered and ramp to MAX speed.
If the CPU was not sufficiently busy to immediately ramp to MAX speed, then
the governor evaluates the CPU load since the last speed adjustment,
choosing the highest value between that longer-term load or the short-term
load since idle exit to determine the CPU speed to ramp to.
A realtime thread is used for scaling up, giving the remaining tasks the
CPU performance benefit, unlike existing governors which are more likely to
schedule rampup work to occur after your performance starved tasks have
completed.
The tuneables for this governor are:
/sys/devices/system/cpu/cpufreq/interactive/min_sample_time:
The minimum amount of time to spend at the current frequency before
ramping down. This is to ensure that the governor has seen enough
historic CPU load data to determine the appropriate workload.
Default is 80000 uS.
/sys/devices/system/cpu/cpufreq/interactive/go_maxspeed_load
The CPU load at which to ramp to max speed. Default is 85.
Change-Id: Ib2b362607c62f7c56d35f44a9ef3280f98c17585
Signed-off-by: Mike Chan <mike@android.com>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Bug: 3152864
Move the x86_64 idle notifiers originally by Andi Kleen and Venkatesh
Pallipadi to generic.
Change-Id: Idf29cda15be151f494ff245933c12462643388d5
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Decare war on uninterruptible sleep. Add a tracepoint which
walks the kernel stack and dumps the first non-scheduler function
called before the scheduler is invoked.
Change-Id: I19e965d5206329360a92cbfe2afcc8c30f65c229
Signed-off-by: Riley Andrews <riandrews@google.com>
This CL adds a new class to monitor and change
dual role usb ports from userspace. The usb
phy drivers can register to the dual_role_usb
class and expose the capabilities of the ports.
The phy drivers can decide on whether a specific
attribute can be changed from userspace by
choosing to implement the appropriate callback.
Cherry-picked from
https://android-review.googlesource.com/#/c/167310/
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Bug: 21615151
Change-Id: Id1c4aaa97e898264d7006381a7badd029b5d9789
Add a pointer to the usb_function inside the
usb_function_instance structure to service
functions specific setup requests even before
the function gets added to the usb_gadget
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: I6f457006f6c5516cc6986ec2acdf5b1ecf259d0c
Move the entire contents of linux/usb/f_accessory.h header to uapi,
it only contains a userspace interface.
Change-Id: Ieb5547da449588ae554988a201c0e6b4e3afc531
Signed-off-by: Colin Cross <ccross@android.com>
Move the most of linux/usb/f_mtp.h header to uapi. Move the only
remaining structure definition into f_mtp.c, the only place that
uses it.
Change-Id: I952c1a9dc15c36bf295a0eb4d74b6b1ad912ed03
Signed-off-by: Colin Cross <ccross@android.com>
The control request will be used by the host to enable/disable USB audio
and the ioctl will be used by userspace to read the audio mode
Change-Id: I81c38611b588451e80eacdccc417ca6e11c60cab
Signed-off-by: Mike Lockwood <lockwood@google.com>
USB accessory mode allows users to connect USB host hardware
specifically designed for Android-powered devices. The accessories
must adhere to the Android accessory protocol outlined in the
http://accessories.android.com documentation. This allows
Android devices that cannot act as a USB host to still interact with
USB hardware. When an Android device is in USB accessory mode, the
attached Android USB accessory acts as the host, provides power
to the USB bus, and enumerates connected devices.
Change-Id: I67964b50d278f3c0471d47efbb7b0973a3502681
Signed-off-by: Mike Lockwood <lockwood@android.com>
USB gadget function driver used by the Android framework to
implement the MTP and PTP protocols. It creates a character device
that provides an interface for fast transfer of files and
supports transferring files greater than 4GB.
Change-Id: I2d8f2c37029fb37d8deb791d04eb7346f94f5adb
Signed-off-by: Mike Lockwood <lockwood@android.com>
