[ Upstream commit da235d2fac212d0add570e755feb1167a830bc99 ]
The hardware manual of both RZ/G2L and RZ/G3S specifies that the reset
monitor registers need to be interrogated when the reset signals are
toggled (chapters "Procedures for Supplying and Stopping Reset Signals"
and "Procedure for Activating Modules"). Without this, there is a
chance that different modules (e.g. Ethernet) are not ready after their
reset signal is toggled, leading to failures (on probe or resume from
deep sleep states).
The same indications are available for RZ/V2M for TYPE-B reset controls.
Fixes: ef3c613ccd ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC")
Fixes: 8090bea324 ("clk: renesas: rzg2l: Add support for RZ/V2M reset monitor reg")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231207070700.4156557-2-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a2b23159499efd36b2d63b3c4534075d12ddc97a ]
According to the hardware manual for RZ/G2L
(r01uh0914ej0130-rzg2l-rzg2lc.pdf), the computation formula for PLL rate
is as follows:
Fout = ((m + k/65536) * Fin) / (p * 2^s)
and k has values in the range [-32768, 32767]. Dividing k by 65536 with
integer arithmetic gives zero all the time, causing slight differences
b/w what has been set vs. what is displayed. Thus, get rid of this and
decompose the formula before dividing k by 65536.
Fixes: ef3c613ccd ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-6-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf51d3b2d048c312764a55d91d67a85ee5535e31 ]
The onitial value of the CPG_PL2SDHI_DSEL bits 0..1 or 4..6 is 01b. The
hardware user's manual (r01uh0914ej0130-rzg2l-rzg2lc.pdf) specifies that
setting 0 is prohibited. Hence rzg2l_cpg_sd_clk_mux_get_parent() should
just read CPG_PL2SDHI_DSEL, trust the value, and return the proper clock
parent index based on the value read.
Fixes: eaff33646f ("clk: renesas: rzg2l: Add SDHI clk mux support")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-5-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d2692ed490e680a41401cef879adebcfafb4298f ]
The SD MUX output (SD0) is further divided by 4 in G2{L,UL}. The
divided clock is SD0_DIV4. SD0_DIV4 is registered with
CLK_SET_RATE_PARENT which means a rate request for it is propagated to
the MUX and could reach rzg2l_cpg_sd_clk_mux_set_parent() concurrently
with the users of SD0.
Add proper locking to avoid concurrent accesses on SD MUX set rate
registers.
Fixes: eaff33646f ("clk: renesas: rzg2l: Add SDHI clk mux support")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230929053915.1530607-4-claudiu.beznea@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
As per RZ/G2L HW(Rev.1.10) manual, reset monitor register value 0 means
reset signal is not applied (deassert state) and 1 means reset signal
is applied (assert state).
reset_control_status() expects a positive value if the reset line is
asserted. But rzg2l_cpg_status function returns zero for asserted
state.
This patch fixes the issue by adding double inverted logic, so that
reset_control_status returns a positive value if the reset line is
asserted.
Fixes: ef3c613ccd ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20220531071657.104121-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
As per RZ/G2L HW(Rev.0.50) manual, clock monitor register value
0 means clock is not supplied and 1 means clock is supplied.
This patch fixes the issue by removing the inverted logic.
Fixing the above, triggered following 2 issues
1) GIC interrupts don't work if we disable IA55_CLK and DMAC_ACLK.
Fixed this issue by adding these clocks as critical clocks.
2) DMA is not working, since the DMA driver is not turning on DMAC_PCLK.
So will provide a fix in the DMA driver to turn on DMA_PCLK.
Fixes: ef3c613ccd ("clk: renesas: Add CPG core wrapper for RZ/G2L SoC")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20210922112405.26413-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
