commit 4b7fe92c06 upstream
commit 9f39d36530 upstream
commit 051737439e upstream
Due to the existing patch order applied to isotp.c in the stable kernel the
original order of depending patches the three original patches
4b7fe92c06 ("can: isotp: add local echo tx processing for consecutive frames")
9f39d36530 ("can: isotp: add support for transmission without flow control")
051737439e ("can: isotp: fix race between isotp_sendsmg() and isotp_release()")
can not be split into different patches that can be applied in working steps
to the stable tree.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit adc8df12d9 ]
Subtract one to __GTPA_MAX, otherwise GTPA_MAX is off by 2.
Fixes: 459aa660eb ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cedd3614e5 ]
This expands generic branch type classification by adding two more entries
there in i.e irq and exception return. Also updates the x86 implementation
to process X86_BR_IRET and X86_BR_IRQ records as appropriate. This changes
branch types reported to user space on x86 platform but it should not be a
problem. The possible scenarios and impacts are enumerated here.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/1645681014-3346-1-git-send-email-anshuman.khandual@arm.com
Stable-dep-of: e53899771a ("perf/x86/lbr: Filter vsyscall addresses")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5027d54a9c upstream.
accept_ra_min_rtr_lft only considered the lifetime of the default route
and discarded entire RAs accordingly.
This change renames accept_ra_min_rtr_lft to accept_ra_min_lft, and
applies the value to individual RA sections; in particular, router
lifetime, PIO preferred lifetime, and RIO lifetime. If any of those
lifetimes are lower than the configured value, the specific RA section
is ignored.
In order for the sysctl to be useful to Android, it should really apply
to all lifetimes in the RA, since that is what determines the minimum
frequency at which RAs must be processed by the kernel. Android uses
hardware offloads to drop RAs for a fraction of the minimum of all
lifetimes present in the RA (some networks have very frequent RAs (5s)
with high lifetimes (2h)). Despite this, we have encountered networks
that set the router lifetime to 30s which results in very frequent CPU
wakeups. Instead of disabling IPv6 (and dropping IPv6 ethertype in the
WiFi firmware) entirely on such networks, it seems better to ignore the
misconfigured routers while still processing RAs from other IPv6 routers
on the same network (i.e. to support IoT applications).
The previous implementation dropped the entire RA based on router
lifetime. This turned out to be hard to expand to the other lifetimes
present in the RA in a consistent manner; dropping the entire RA based
on RIO/PIO lifetimes would essentially require parsing the whole thing
twice.
Fixes: 1671bcfd76 ("net: add sysctl accept_ra_min_rtr_lft")
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Patrick Rohr <prohr@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230726230701.919212-1-prohr@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1671bcfd76 upstream.
This change adds a new sysctl accept_ra_min_rtr_lft to specify the
minimum acceptable router lifetime in an RA. If the received RA router
lifetime is less than the configured value (and not 0), the RA is
ignored.
This is useful for mobile devices, whose battery life can be impacted
by networks that configure RAs with a short lifetime. On such networks,
the device should never gain IPv6 provisioning and should attempt to
drop RAs via hardware offload, if available.
Signed-off-by: Patrick Rohr <prohr@google.com>
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7cb779a686 ]
Commit 151e887d8f ("veth: Fixing transmit return status for dropped
packets") exposed the fact that bpf_clone_redirect is capable of
returning raw NET_XMIT_XXX return codes.
This is in the conflict with its UAPI doc which says the following:
"0 on success, or a negative error in case of failure."
Update the UAPI to reflect the fact that bpf_clone_redirect can
return positive error numbers, but don't explicitly define
their meaning.
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230911194731.286342-1-sdf@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7ed3465da ]
When compiling with gcc 13 and CONFIG_FORTIFY_SOURCE=y, the following
warning appears:
In function ‘fortify_memcpy_chk’,
inlined from ‘size_entry_mwt’ at net/bridge/netfilter/ebtables.c:2118:2:
./include/linux/fortify-string.h:592:25: error: call to ‘__read_overflow2_field’
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Werror=attribute-warning]
592 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The compiler is complaining:
memcpy(&offsets[1], &entry->watchers_offset,
sizeof(offsets) - sizeof(offsets[0]));
where memcpy reads beyong &entry->watchers_offset to copy
{watchers,target,next}_offset altogether into offsets[]. Silence the
warning by wrapping these three up via struct_group().
Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e910c8e3aa upstream.
Commit df8fc4e934 ("kbuild: Enable -fstrict-flex-arrays=3") introduced a warning
for the autofs_dev_ioctl structure:
In function 'check_name',
inlined from 'validate_dev_ioctl' at fs/autofs/dev-ioctl.c:131:9,
inlined from '_autofs_dev_ioctl' at fs/autofs/dev-ioctl.c:624:8:
fs/autofs/dev-ioctl.c:33:14: error: 'strchr' reading 1 or more bytes from a region of size 0 [-Werror=stringop-overread]
33 | if (!strchr(name, '/'))
| ^~~~~~~~~~~~~~~~~
In file included from include/linux/auto_dev-ioctl.h:10,
from fs/autofs/autofs_i.h:10,
from fs/autofs/dev-ioctl.c:14:
include/uapi/linux/auto_dev-ioctl.h: In function '_autofs_dev_ioctl':
include/uapi/linux/auto_dev-ioctl.h:112:14: note: source object 'path' of size 0
112 | char path[0];
| ^~~~
This is easily fixed by changing the gnu 0-length array into a c99
flexible array. Since this is a uapi structure, we have to be careful
about possible regressions but this one should be fine as they are
equivalent here. While it would break building with ancient gcc versions
that predate c99, it helps building with --std=c99 and -Wpedantic builds
in user space, as well as non-gnu compilers. This means we probably
also want it fixed in stable kernels.
Cc: stable@vger.kernel.org
Cc: Kees Cook <keescook@chromium.org>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230523081944.581710-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 26ae58f65e ]
VIDIOC_ENUMINPUT documentation describes the tuner field of
struct v4l2_input as index:
Documentation/userspace-api/media/v4l/vidioc-enuminput.rst
"
* - __u32
- ``tuner``
- Capture devices can have zero or more tuners (RF demodulators).
When the ``type`` is set to ``V4L2_INPUT_TYPE_TUNER`` this is an
RF connector and this field identifies the tuner. It corresponds
to struct :c:type:`v4l2_tuner` field ``index``. For
details on tuners see :ref:`tuner`.
"
Drivers I could find also use the 'tuner' field as an index, e.g.:
drivers/media/pci/bt8xx/bttv-driver.c bttv_enum_input()
drivers/media/usb/go7007/go7007-v4l2.c vidioc_enum_input()
However, the UAPI comment claims this field is 'enum v4l2_tuner_type':
include/uapi/linux/videodev2.h
This field being 'enum v4l2_tuner_type' is unlikely as it seems to be
never used that way in drivers, and documentation confirms it. It seem
this comment got in accidentally in the commit which this patch fixes.
Fix the UAPI comment to stop confusion.
This was pointed out by Dmitry while reviewing VIDIOC_ENUMINPUT
support for strace.
Fixes: 6016af82ea ("[media] v4l2: use __u32 rather than enums in ioctl() structs")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 95a55437dc upstream.
The Amiga partition parser module uses signed int for partition sector
address and count, which will overflow for disks larger than 1 TB.
Use u64 as type for sector address and size to allow using disks up to
2 TB without LBD support, and disks larger than 2 TB with LBD. The RBD
format allows to specify disk sizes up to 2^128 bytes (though native
OS limitations reduce this somewhat, to max 2^68 bytes), so check for
u64 overflow carefully to protect against overflowing sector_t.
This bug was reported originally in 2012, and the fix was created by
the RDB author, Joanne Dow <jdow@earthlink.net>. A patch had been
discussed and reviewed on linux-m68k at that time but never officially
submitted (now resubmitted as patch 1 of this series).
Patch 3 (this series) adds additional error checking and warning
messages. One of the error checks now makes use of the previously
unused rdb_CylBlocks field, which causes a 'sparse' warning
(cast to restricted __be32).
Annotate all 32 bit fields in affs_hardblocks.h as __be32, as the
on-disk format of RDB and partition blocks is always big endian.
Reported-by: Martin Steigerwald <Martin@lichtvoll.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=43511
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Message-ID: <201206192146.09327.Martin@lichtvoll.de>
Cc: <stable@vger.kernel.org> # 5.2
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230620201725.7020-3-schmitzmic@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 52f79609c0 ]
When compiling YNL generated code compiler complains about
array-initializer-out-of-bounds. Turns out the MAX value
for STATS_GRP uses the value for STATS.
This may lead to random corruptions in user space (kernel
itself doesn't use this value as it never parses stats).
Fixes: f09ea6fb12 ("ethtool: add a new command for reading standard stats")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1202cdd665 upstream.
DECnet is an obsolete network protocol that receives more attention
from kernel janitors than users. It belongs in computer protocol
history museum not in Linux kernel.
It has been "Orphaned" in kernel since 2010. The iproute2 support
for DECnet was dropped in 5.0 release. The documentation link on
Sourceforge says it is abandoned there as well.
Leave the UAPI alone to keep userspace programs compiling.
This means that there is still an empty neighbour table
for AF_DECNET.
The table of /proc/sys/net entries was updated to match
current directories and reformatted to be alphabetical.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: David Ahern <dsahern@kernel.org>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3632679d9e upstream.
With a raw socket bound to IPPROTO_RAW (ie with hdrincl enabled), the
protocol field of the flow structure, build by raw_sendmsg() /
rawv6_sendmsg()), is set to IPPROTO_RAW. This breaks the ipsec policy
lookup when some policies are defined with a protocol in the selector.
For ipv6, the sin6_port field from 'struct sockaddr_in6' could be used to
specify the protocol. Just accept all values for IPPROTO_RAW socket.
For ipv4, the sin_port field of 'struct sockaddr_in' could not be used
without breaking backward compatibility (the value of this field was never
checked). Let's add a new kind of control message, so that the userland
could specify which protocol is used.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20230522120820.1319391-1-nicolas.dichtel@6wind.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5944b5abd8 ]
Currently, we use hard code number to verify if we are in the
arp_interval timeslice. But some user may want to reduce/extend
the verify timeslice. With the similar team option 'missed_max'
the uers could change that number based on their own environment.
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 9949e2efb5 ("bonding: fix send_peer_notif overflow")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 604e6681e1 upstream.
Since the introduction of scrub interface, the only flag that we support
is BTRFS_SCRUB_READONLY. Thus there is no sanity checks, if there are
some undefined flags passed in, we just ignore them.
This is problematic if we want to introduce new scrub flags, as we have
no way to determine if such flags are supported.
Address the problem by introducing a check for the flags, and if
unsupported flags are set, return -EOPNOTSUPP to inform the user space.
This check should be backported for all supported kernels before any new
scrub flags are introduced.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 31088f6f79 ]
typeof is (still) a GNU extension, which means that it cannot be used when
building ISO C (e.g. -std=c99). It should therefore be avoided in uapi
headers in favour of the ISO-friendly __typeof__.
Unfortunately this issue could not be detected by
CONFIG_UAPI_HEADER_TEST=y as the __ALIGN_KERNEL() macro is not expanded in
any uapi header.
This matters from a userspace perspective, not a kernel one. uapi
headers and their contents are expected to be usable in a variety of
situations, and in particular when building ISO C applications (with
-std=c99 or similar).
This particular problem can be reproduced by trying to use the
__ALIGN_KERNEL macro directly in application code, say:
#include <linux/const.h>
int align(int x, int a)
{
return __KERNEL_ALIGN(x, a);
}
and trying to build that with -std=c99.
Link: https://lkml.kernel.org/r/20230411092747.3759032-1-kevin.brodsky@arm.com
Fixes: a79ff731a1 ("netfilter: xtables: make XT_ALIGN() usable in exported headers by exporting __ALIGN_KERNEL()")
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reported-by: Ruben Ayrapetyan <ruben.ayrapetyan@arm.com>
Tested-by: Ruben Ayrapetyan <ruben.ayrapetyan@arm.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Tested-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b839212988 ]
The memcpy() in uvc_video_decode_meta() intentionally copies across the
length and flags members and into the trailing buf flexible array.
Split the copy so that the compiler can better reason about (the lack
of) buffer overflows here. Avoid the run-time false positive warning:
memcpy: detected field-spanning write (size 12) of single field "&meta->length" at drivers/media/usb/uvc/uvc_video.c:1355 (size 1)
Additionally fix a typo in the documentation for struct uvc_meta_buf.
Reported-by: ionut_n2001@yahoo.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216810
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03702d4d29 ]
Since commit 58e0be1ef6 ("net: use struct_group to copy ip/ipv6
header addresses"), ip and ipv6 headers started to use the __struct_group
definition, which is defined at include/uapi/linux/stddef.h. However,
linux/stddef.h isn't explicitly included in include/uapi/linux/{ip,ipv6}.h,
which breaks build of xskxceiver bpf selftest if you install the uapi
headers in the system:
$ make V=1 xskxceiver -C tools/testing/selftests/bpf
...
make: Entering directory '(...)/tools/testing/selftests/bpf'
gcc -g -O0 -rdynamic -Wall -Werror (...)
In file included from xskxceiver.c:79:
/usr/include/linux/ip.h:103:9: error: expected specifier-qualifier-list before ‘__struct_group’
103 | __struct_group(/* no tag */, addrs, /* no attrs */,
| ^~~~~~~~~~~~~~
...
Include the missing <linux/stddef.h> dependency in ip.h and do the
same for the ipv6.h header.
Fixes: 58e0be1ef6 ("net: use struct_group to copy ip/ipv6 header addresses")
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Tested-by: Carlos O'Donell <carlos@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a44b765148 upstream.
An SCTP endpoint can start an association through a path and tear it
down over another one. That means the initial path will not see the
shutdown sequence, and the conntrack entry will remain in ESTABLISHED
state for 5 days.
By merging the HEARTBEAT_ACKED and ESTABLISHED states into one
ESTABLISHED state, there remains no difference between a primary or
secondary path. The timeout for the merged ESTABLISHED state is set to
210 seconds (hb_interval * max_path_retrans + rto_max). So, even if a
path doesn't see the shutdown sequence, it will expire in a reasonable
amount of time.
With this change in place, there is now more than one state from which
we can transition to ESTABLISHED, COOKIE_ECHOED and HEARTBEAT_SENT, so
handle the setting of ASSURED bit whenever a state change has happened
and the new state is ESTABLISHED. Removed the check for dir==REPLY since
the transition to ESTABLISHED can happen only in the reply direction.
Fixes: 9fb9cbb108 ("[NETFILTER]: Add nf_conntrack subsystem.")
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit caf1aeaffc ]
We can have dependencies between epoll and io_uring. Consider an epoll
context, identified by the epfd file descriptor, and an io_uring file
descriptor identified by iofd. If we add iofd to the epfd context, and
arm a multishot poll request for epfd with iofd, then the multishot
poll request will repeatedly trigger and generate events until terminated
by CQ ring overflow. This isn't a desired behavior.
Add EPOLL_URING so that io_uring can pass it in as part of the poll wakeup
key, and io_uring can check for that to detect a potential recursive
invocation.
Cc: stable@vger.kernel.org # 6.0
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit defbab270d ]
Commit bc27fb68aa ("include/uapi/linux/byteorder, swab: force inlining
of some byteswap operations") added __always_inline to swab functions
and commit 283d757378 ("uapi/linux/stddef.h: Provide __always_inline to
userspace headers") added a definition of __always_inline for use in
exported headers when the kernel's compiler.h is not available.
However, since swab.h does not include stddef.h, if the header soup does
not indirectly include it, the definition of __always_inline is missing,
resulting in a compilation failure, which was observed compiling the
perf tool using exported headers containing this commit:
In file included from /usr/include/linux/byteorder/little_endian.h:12:0,
from /usr/include/asm/byteorder.h:14,
from tools/include/uapi/linux/perf_event.h:20,
from perf.h:8,
from builtin-bench.c:18:
/usr/include/linux/swab.h:160:8: error: unknown type name `__always_inline'
static __always_inline __u16 __swab16p(const __u16 *p)
Fix this by replacing the inclusion of linux/compiler.h with
linux/stddef.h to ensure that we pick up that definition if required,
without relying on it's indirect inclusion. compiler.h is then included
indirectly, via stddef.h.
Fixes: 283d757378 ("uapi/linux/stddef.h: Provide __always_inline to userspace headers")
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Petr Vaněk <arkamar@atlas.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 986d93f55b ]
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:
UBSAN: shift-out-of-bounds in kernel/auditfilter.c:179:23
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
<TASK>
dump_stack_lvl+0x7d/0xa5
dump_stack+0x15/0x1b
ubsan_epilogue+0xe/0x4e
__ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
audit_register_class+0x9d/0x137
audit_classes_init+0x4d/0xb8
do_one_initcall+0x76/0x430
kernel_init_freeable+0x3b3/0x422
kernel_init+0x24/0x1e0
ret_from_fork+0x1f/0x30
</TASK>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
[PM: remove bad 'Fixes' tag as issue predates git, added in v2.6.6-rc1]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58e0be1ef6 ]
kernel test robot reported warnings when build bonding module with
make W=1 O=build_dir ARCH=x86_64 SHELL=/bin/bash drivers/net/bonding/:
from ../drivers/net/bonding/bond_main.c:35:
In function ‘fortify_memcpy_chk’,
inlined from ‘iph_to_flow_copy_v4addrs’ at ../include/net/ip.h:566:2,
inlined from ‘bond_flow_ip’ at ../drivers/net/bonding/bond_main.c:3984:3:
../include/linux/fortify-string.h:413:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of f
ield (2nd parameter); maybe use struct_group()? [-Wattribute-warning]
413 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function ‘fortify_memcpy_chk’,
inlined from ‘iph_to_flow_copy_v6addrs’ at ../include/net/ipv6.h:900:2,
inlined from ‘bond_flow_ip’ at ../drivers/net/bonding/bond_main.c:3994:3:
../include/linux/fortify-string.h:413:25: warning: call to ‘__read_overflow2_field’ declared with attribute warning: detected read beyond size of f
ield (2nd parameter); maybe use struct_group()? [-Wattribute-warning]
413 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is because we try to copy the whole ip/ip6 address to the flow_key,
while we only point the to ip/ip6 saddr. Note that since these are UAPI
headers, __struct_group() is used to avoid the compiler warnings.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: c3f8324188 ("net: Add full IPv6 addresses to flow_keys")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20221115142400.1204786-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46653972e3 ]
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:
UBSAN: shift-out-of-bounds in security/commoncap.c:1252:2
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
<TASK>
dump_stack_lvl+0x7d/0xa5
dump_stack+0x15/0x1b
ubsan_epilogue+0xe/0x4e
__ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
cap_task_prctl+0x561/0x6f0
security_task_prctl+0x5a/0xb0
__x64_sys_prctl+0x61/0x8f0
do_syscall_64+0x58/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
Fixes: e338d263a7 ("Add 64-bit capability support to the kernel")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Acked-by: Andrew G. Morgan <morgan@kernel.org>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8da7f0976b ]
If it is a progressive (non-interlaced) format, then ignore the
interlaced timing values.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 7f68127fa1 ([media] videodev2.h: defines to calculate blanking and frame sizes)
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccae4a19c9 ]
Now that we log only dir index keys when logging a directory, we no longer
need to deal with dir item keys in the log replay code for replaying
directory deletes. This is also true for the case when we replay a log
tree created by a kernel that still logs dir items.
So remove the remaining code of the replay of directory deletes algorithm
that deals with dir item keys.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 20646f5b1e ]
Commit e2be04c7f9 ("License cleanup: add SPDX license identifier to
uapi header files with a license") added the correct SPDX identifier to
include/uapi/linux/netfilter/xt_IDLETIMER.h.
A subsequent commit removed it for no reason and reintroduced the UAPI
license incorrectness as the file is now missing the UAPI exception
again.
Add it back and remove the GPLv2 boilerplate while at it.
Fixes: 68983a354a ("netfilter: xtables: Add snapshot of hardidletimer target")
Cc: Manoj Basapathi <manojbm@codeaurora.org>
Cc: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: netfilter-devel@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e70a3263a7 ]
Currently, data[5..7] of struct can_frame, when used as a CAN error
frame, are defined as being "controller specific". Device specific
behaviours are problematic because it prevents someone from writing
code which is portable between devices.
As a matter of fact, data[5] is never used, data[6] is always used to
report TX error counter and data[7] is always used to report RX error
counter. can-utils also relies on this.
This patch updates the comment in the uapi header to specify that
data[5] is reserved (and thus should not be used) and that data[6..7]
are used for error counters.
Fixes: 0d66548a10 ("[CAN]: Add PF_CAN core module")
Link: https://lore.kernel.org/all/20220719143550.3681-11-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3080ea5553 ]
There are many places where kernel code wants to have several different
typed trailing flexible arrays. This would normally be done with multiple
flexible arrays in a union, but since GCC and Clang don't (on the surface)
allow this, there have been many open-coded workarounds, usually involving
neighboring 0-element arrays at the end of a structure. For example,
instead of something like this:
struct thing {
...
union {
struct type1 foo[];
struct type2 bar[];
};
};
code works around the compiler with:
struct thing {
...
struct type1 foo[0];
struct type2 bar[];
};
Another case is when a flexible array is wanted as the single member
within a struct (which itself is usually in a union). For example, this
would be worked around as:
union many {
...
struct {
struct type3 baz[0];
};
};
These kinds of work-arounds cause problems with size checks against such
zero-element arrays (for example when building with -Warray-bounds and
-Wzero-length-bounds, and with the coming FORTIFY_SOURCE improvements),
so they must all be converted to "real" flexible arrays, avoiding warnings
like this:
fs/hpfs/anode.c: In function 'hpfs_add_sector_to_btree':
fs/hpfs/anode.c:209:27: warning: array subscript 0 is outside the bounds of an interior zero-length array 'struct bplus_internal_node[0]' [-Wzero-length-bounds]
209 | anode->btree.u.internal[0].down = cpu_to_le32(a);
| ~~~~~~~~~~~~~~~~~~~~~~~^~~
In file included from fs/hpfs/hpfs_fn.h:26,
from fs/hpfs/anode.c:10:
fs/hpfs/hpfs.h:412:32: note: while referencing 'internal'
412 | struct bplus_internal_node internal[0]; /* (internal) 2-word entries giving
| ^~~~~~~~
drivers/net/can/usb/etas_es58x/es58x_fd.c: In function 'es58x_fd_tx_can_msg':
drivers/net/can/usb/etas_es58x/es58x_fd.c:360:35: warning: array subscript 65535 is outside the bounds of an interior zero-length array 'u8[0]' {aka 'unsigned char[]'} [-Wzero-length-bounds]
360 | tx_can_msg = (typeof(tx_can_msg))&es58x_fd_urb_cmd->raw_msg[msg_len];
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/net/can/usb/etas_es58x/es58x_core.h:22,
from drivers/net/can/usb/etas_es58x/es58x_fd.c:17:
drivers/net/can/usb/etas_es58x/es58x_fd.h:231:6: note: while referencing 'raw_msg'
231 | u8 raw_msg[0];
| ^~~~~~~
However, it _is_ entirely possible to have one or more flexible arrays
in a struct or union: it just has to be in another struct. And since it
cannot be alone in a struct, such a struct must have at least 1 other
named member -- but that member can be zero sized. Wrap all this nonsense
into the new DECLARE_FLEX_ARRAY() in support of having flexible arrays
in unions (or alone in a struct).
As with struct_group(), since this is needed in UAPI headers as well,
implement the core there, with a non-UAPI wrapper.
Additionally update kernel-doc to understand its existence.
https://github.com/KSPP/linux/issues/137
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4568fc852 ]
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields. Wrap the target region
in struct_group(). This additionally fixes a theoretical misalignment
of the copy (since the size of "buf" changes between 64-bit and 32-bit,
but this is likely never built for 64-bit).
FWIW, I think this code is totally broken on 64-bit (which appears to
not be a "real" build configuration): it would either always fail (with
an uninitialized data->buf_size) or would cause corruption in userspace
due to the copy_to_user() in the call path against an uninitialized
data->buf value:
omap3isp_stat_request_statistics_time32(...)
struct omap3isp_stat_data data64;
...
omap3isp_stat_request_statistics(stat, &data64);
int omap3isp_stat_request_statistics(struct ispstat *stat,
struct omap3isp_stat_data *data)
...
buf = isp_stat_buf_get(stat, data);
static struct ispstat_buffer *isp_stat_buf_get(struct ispstat *stat,
struct omap3isp_stat_data *data)
...
if (buf->buf_size > data->buf_size) {
...
return ERR_PTR(-EINVAL);
}
...
rval = copy_to_user(data->buf,
buf->virt_addr,
buf->buf_size);
Regardless, additionally initialize data64 to be zero-filled to avoid
undefined behavior.
Link: https://lore.kernel.org/lkml/20211215220505.GB21862@embeddedor
Cc: Arnd Bergmann <arnd@arndb.de>
Fixes: 378e3f81cb ("media: omap3isp: support 64-bit version of omap3isp_stat_data")
Cc: stable@vger.kernel.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50d7bd38c3 ]
Kernel code has a regular need to describe groups of members within a
structure usually when they need to be copied or initialized separately
from the rest of the surrounding structure. The generally accepted design
pattern in C is to use a named sub-struct:
struct foo {
int one;
struct {
int two;
int three, four;
} thing;
int five;
};
This would allow for traditional references and sizing:
memcpy(&dst.thing, &src.thing, sizeof(dst.thing));
However, doing this would mean that referencing struct members enclosed
by such named structs would always require including the sub-struct name
in identifiers:
do_something(dst.thing.three);
This has tended to be quite inflexible, especially when such groupings
need to be added to established code which causes huge naming churn.
Three workarounds exist in the kernel for this problem, and each have
other negative properties.
To avoid the naming churn, there is a design pattern of adding macro
aliases for the named struct:
#define f_three thing.three
This ends up polluting the global namespace, and makes it difficult to
search for identifiers.
Another common work-around in kernel code avoids the pollution by avoiding
the named struct entirely, instead identifying the group's boundaries using
either a pair of empty anonymous structs of a pair of zero-element arrays:
struct foo {
int one;
struct { } start;
int two;
int three, four;
struct { } finish;
int five;
};
struct foo {
int one;
int start[0];
int two;
int three, four;
int finish[0];
int five;
};
This allows code to avoid needing to use a sub-struct named for member
references within the surrounding structure, but loses the benefits of
being able to actually use such a struct, making it rather fragile. Using
these requires open-coded calculation of sizes and offsets. The efforts
made to avoid common mistakes include lots of comments, or adding various
BUILD_BUG_ON()s. Such code is left with no way for the compiler to reason
about the boundaries (e.g. the "start" object looks like it's 0 bytes
in length), making bounds checking depend on open-coded calculations:
if (length > offsetof(struct foo, finish) -
offsetof(struct foo, start))
return -EINVAL;
memcpy(&dst.start, &src.start, offsetof(struct foo, finish) -
offsetof(struct foo, start));
However, the vast majority of places in the kernel that operate on
groups of members do so without any identification of the grouping,
relying either on comments or implicit knowledge of the struct contents,
which is even harder for the compiler to reason about, and results in
even more fragile manual sizing, usually depending on member locations
outside of the region (e.g. to copy "two" and "three", use the start of
"four" to find the size):
BUILD_BUG_ON((offsetof(struct foo, four) <
offsetof(struct foo, two)) ||
(offsetof(struct foo, four) <
offsetof(struct foo, three));
if (length > offsetof(struct foo, four) -
offsetof(struct foo, two))
return -EINVAL;
memcpy(&dst.two, &src.two, length);
In order to have a regular programmatic way to describe a struct
region that can be used for references and sizing, can be examined for
bounds checking, avoids forcing the use of intermediate identifiers,
and avoids polluting the global namespace, introduce the struct_group()
macro. This macro wraps the member declarations to create an anonymous
union of an anonymous struct (no intermediate name) and a named struct
(for references and sizing):
struct foo {
int one;
struct_group(thing,
int two;
int three, four;
);
int five;
};
if (length > sizeof(src.thing))
return -EINVAL;
memcpy(&dst.thing, &src.thing, length);
do_something(dst.three);
There are some rare cases where the resulting struct_group() needs
attributes added, so struct_group_attr() is also introduced to allow
for specifying struct attributes (e.g. __align(x) or __packed).
Additionally, there are places where such declarations would like to
have the struct be tagged, so struct_group_tagged() is added.
Given there is a need for a handful of UAPI uses too, the underlying
__struct_group() macro has been defined in UAPI so it can be used there
too.
To avoid confusing scripts/kernel-doc, hide the macro from its struct
parsing.
Co-developed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/lkml/20210728023217.GC35706@embeddedor
Enhanced-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/lkml/41183a98-bdb9-4ad6-7eab-5a7292a6df84@rasmusvillemoes.dk
Enhanced-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/lkml/1d9a2e6df2a9a35b2cdd50a9a68cac5991e7e5f0.camel@intel.com
Enhanced-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/lkml/YQKa76A6XuFqgM03@phenom.ffwll.local
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c46b38dc87 ]
Allow to match and mangle on inner headers / payload data after the
transport header. There is a new field in the pktinfo structure that
stores the inner header offset which is calculated only when requested.
Only TCP and UDP supported at this stage.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7c3e9fcad9 upstream.
The typedefs u32 and u64 are not available in userspace. Thus user get
an error he try to use DMA_BUF_SET_NAME_A or DMA_BUF_SET_NAME_B:
$ gcc -Wall -c -MMD -c -o ioctls_list.o ioctls_list.c
In file included from /usr/include/x86_64-linux-gnu/asm/ioctl.h:1,
from /usr/include/linux/ioctl.h:5,
from /usr/include/asm-generic/ioctls.h:5,
from ioctls_list.c:11:
ioctls_list.c:463:29: error: ‘u32’ undeclared here (not in a function)
463 | { "DMA_BUF_SET_NAME_A", DMA_BUF_SET_NAME_A, -1, -1 }, // linux/dma-buf.h
| ^~~~~~~~~~~~~~~~~~
ioctls_list.c:464:29: error: ‘u64’ undeclared here (not in a function)
464 | { "DMA_BUF_SET_NAME_B", DMA_BUF_SET_NAME_B, -1, -1 }, // linux/dma-buf.h
| ^~~~~~~~~~~~~~~~~~
The issue was initially reported here[1].
[1]: https://github.com/jerome-pouiller/ioctl/pull/14
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes: a5bff92eaa ("dma-buf: Fix SET_NAME ioctl uapi")
CC: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220517072708.245265-1-Jerome.Pouiller@silabs.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a69e2b385 upstream.
remote_port is another case of a BPF context field documented as a 32-bit
value in network byte order for which the BPF context access converter
generates a load of a zero-padded 16-bit integer in network byte order.
First such case was dst_port in bpf_sock which got addressed in commit
4421a58271 ("bpf: Make dst_port field in struct bpf_sock 16-bit wide").
Loading 4-bytes from the remote_port offset and converting the value with
bpf_ntohl() leads to surprising results, as the expected value is shifted
by 16 bits.
Reduce the confusion by splitting the field in two - a 16-bit field holding
a big-endian integer, and a 16-bit zero-padding anonymous field that
follows it.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220209184333.654927-2-jakub@cloudflare.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 530e0d46c6 ]
The N_As value describes the time a CAN frame needs on the wire when
transmitted by the CAN controller. Even very short CAN FD frames need
arround 100 usecs (bitrate 1Mbit/s, data bitrate 8Mbit/s).
Having N_As to be zero (the former default) leads to 'no CAN frame
separation' when STmin is set to zero by the receiving node. This 'burst
mode' should not be enabled by default as it could potentially dump a high
number of CAN frames into the netdev queue from the soft hrtimer context.
This does not affect the system stability but is just not nice and
cooperative.
With this N_As/frame_txtime value the 'burst mode' is disabled by default.
As user space applications usually do not set the frame_txtime element
of struct can_isotp_options the new in-kernel default is very likely
overwritten with zero when the sockopt() CAN_ISOTP_OPTS is invoked.
To make sure that a N_As value of zero is only set intentional the
value '0' is now interpreted as 'do not change the current value'.
When a frame_txtime of zero is required for testing purposes this
CAN_ISOTP_FRAME_TXTIME_ZERO u32 value has to be set in frame_txtime.
Link: https://lore.kernel.org/all/20220309120416.83514-2-socketcan@hartkopp.net
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4421a58271 ]
Menglong Dong reports that the documentation for the dst_port field in
struct bpf_sock is inaccurate and confusing. From the BPF program PoV, the
field is a zero-padded 16-bit integer in network byte order. The value
appears to the BPF user as if laid out in memory as so:
offsetof(struct bpf_sock, dst_port) + 0 <port MSB>
+ 8 <port LSB>
+16 0x00
+24 0x00
32-, 16-, and 8-bit wide loads from the field are all allowed, but only if
the offset into the field is 0.
32-bit wide loads from dst_port are especially confusing. The loaded value,
after converting to host byte order with bpf_ntohl(dst_port), contains the
port number in the upper 16-bits.
Remove the confusion by splitting the field into two 16-bit fields. For
backward compatibility, allow 32-bit wide loads from offsetof(struct
bpf_sock, dst_port).
While at it, allow loads 8-bit loads at offset [0] and [1] from dst_port.
Reported-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/r/20220130115518.213259-2-jakub@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ee2a098851 upstream.
Let's say that the caller has storage for num_elem stack frames. Then,
the BPF stack helper functions walk the stack for only num_elem frames.
This means that if skip > 0, one keeps only 'num_elem - skip' frames.
This is because it sets init_nr in the perf_callchain_entry to the end
of the buffer to save num_elem entries only. I believe it was because
the perf callchain code unwound the stack frames until it reached the
global max size (sysctl_perf_event_max_stack).
However it now has perf_callchain_entry_ctx.max_stack to limit the
iteration locally. This simplifies the code to handle init_nr in the
BPF callstack entries and removes the confusion with the perf_event's
__PERF_SAMPLE_CALLCHAIN_EARLY which sets init_nr to 0.
Also change the comment on bpf_get_stack() in the header file to be
more explicit what the return value means.
Fixes: c195651e56 ("bpf: add bpf_get_stack helper")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/30a7b5d5-6726-1cc2-eaee-8da2828a9a9c@oracle.com
Link: https://lore.kernel.org/bpf/20220314182042.71025-1-namhyung@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based-on-patch-by: Eugene Loh <eugene.loh@oracle.com>
[ Upstream commit a603ca60ce ]
Commit 54da3e381c ("serial: 8250_aspeed_vuart: use UPF_IOREMAP to
set up register mapping") fixed a bug that had, as a side-effect,
prevented the 8250_aspeed_vuart driver from enabling the VUART's
FIFOs. However, fixing that (and hence enabling the FIFOs) has in
turn revealed what appears to be a hardware bug in the ASPEED VUART in
which the host-side THRE bit doesn't get if the BMC-side receive FIFO
trigger level is set to anything but one byte. This causes problems
for polled-mode writes from the host -- for example, Linux kernel
console writes proceed at a glacial pace (less than 100 bytes per
second) because the write path waits for a 10ms timeout to expire
after every character instead of being able to continue on to the next
character upon seeing THRE asserted. (GRUB behaves similarly.)
As a workaround, introduce a new port type for the ASPEED VUART that's
identical to PORT_16550A as it had previously been using, but with
UART_FCR_R_TRIG_00 instead to set the receive FIFO trigger level to
one byte, which (experimentally) seems to avoid the problematic THRE
behavior.
Fixes: 54da3e381c ("serial: 8250_aspeed_vuart: use UPF_IOREMAP to set up register mapping")
Tested-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Link: https://lore.kernel.org/r/20220211004203.14915-1-zev@bewilderbeest.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bfdf4e6208 ]
The rseq rseq_cs.ptr.{ptr32,padding} uapi endianness handling is
entirely wrong on 32-bit little endian: a preprocessor logic mistake
wrongly uses the big endian field layout on 32-bit little endian
architectures.
Fortunately, those ptr32 accessors were never used within the kernel,
and only meant as a convenience for user-space.
Remove those and replace the whole rseq_cs union by a __u64 type, as
this is the only thing really needed to express the ABI. Document how
32-bit architectures are meant to interact with this field.
Fixes: ec9c82e03a ("rseq: uapi: Declare rseq_cs field as union, update includes")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220127152720.25898-1-mathieu.desnoyers@efficios.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 54f586a915 upstream.
Again new complaints surfaced that we had broken the ABI here,
although previously all the userspace tools had agreed that it
was their mistake and fixed it. Yet now there are cases (e.g.
RHEL) that want to run old userspace with newer kernels, and
thus are broken.
Since this is a bit of a whack-a-mole thing, change the whole
extensibility scheme of rfkill to no longer just rely on the
message lengths, but instead require userspace to opt in via a
new ioctl to a given maximum event size that it is willing to
understand.
By default, set that to RFKILL_EVENT_SIZE_V1 (8), so that the
behaviour for userspace not calling the ioctl will look as if
it's just running on an older kernel.
Fixes: 14486c8261 ("rfkill: add a reason to the HW rfkill state")
Cc: stable@vger.kernel.org # 5.11+
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220316212749.16491491b270.Ifcb1950998330a596f29a2a162e00b7546a1d6d0@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
