PD#SWPL-14463
Problem:
dv vertical potch is small
Solution:
increase vpotch from 0x30 to 0x38
Verify:
verify on sm1 720p.
Change-Id: Iebf6708f62a8b8c2a32accf9ef721b4d12fa2370
Signed-off-by: yao liu <yao.liu@amlogic.com>
PD#SWPL-14306
Problem:
When sr0 v scaler is enabled or not, the sr0 max width
is incorrectly.
Solution:
Using the correct sr0 max width.
Verify:
Verified by u212
Change-Id: Id5e0b66f0878676536be0e0970fe8f26419b978c
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#OTT-5276
Problem:
CTS EncodeDecodeTest failed. Ion sync ioctrl was
forwarded to a dummy implementation. So cached dma buffer
syncing between device and driver was inconsistent occasionally.
Solution:
Changed the dummy_dma_ops to swiotbl_dma_ops when ion_sync_for_device
Verify:
franklin, hertz
Change-Id: I16863bba6c3fe16b9c3b2b410ade6e45c9e74826
Signed-off-by: baocheng sun <baocheng.sun@amlogic.com>
PD#SWPL-13597
Problem:
av diff over 200ms after seek when test AL1 ep sync
Solution:
clear omx_pts_set_index when session switch that new playback, drop
old index, new index will update asap when set_omx_pts invoked.
Verify:
verify by skb nts
Change-Id: I5f46338d46524ceb9a4e907cf9db07ff2e373a08
Signed-off-by: shuanglong.wang <shuanglong.wang@amlogic.com>
PD#SWPL-6655
Problem:
tm2 tvcore not bitmatch
Solution:
1.Config VIU_VD1_FMT_CTRL for tm2
2.Config DIAG_CTRL, CRC_CTRL and CM_CRC reg for tm2
3.Config DOLBY_PATH_CTRL for tm2
Verify:
Verified on tm2
Change-Id: I56a086c498ed4d3bf2f43a4639c79546072d586b
Signed-off-by: yao liu <yao.liu@amlogic.com>
PD#SWPL-13990
Problem:
There are some conflicts between csc and dv module switching.
Can not switch to SDR->DV when HDR core is working on SDR->SDR mode.
Solution:
1. Improve the switching policy. DV and csc will use same on.
2. add mute operation under dv mode.
Verify:
Verified on AC211
Change-Id: I4d59328fc34228a0ef5275d22643932c4dfe00b0
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#SWPL-12580
Problem:
pcmode can not disable lc
Solution:
add lc enable/disable in pc mode
Verify:
verified by tl1
Change-Id: Ie8f7ff84549cd42efef550ecd7adf6d959ff5a4f
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
PD#SWPL-14463
Problem:
OSD hold line changed from 4 to 8, dv vertical
potch should be adjusted accordingly.
Solution:
increase vpotch from 0x20 to 0x30.
Verify:
verify on sm1 720p.
Change-Id: I33779829cb80ce34c5596081a7591278e214d347
Signed-off-by: yao liu <yao.liu@amlogic.com>
PD#TV-10253
Problem:
PD#TV-10253, SWPL-12816
dtv play when pcr is invalid, avsync is lost sometimes.
Solution:
add some specific marginal checks.
Verify:
X301
Change-Id: I2115bc934cd87d8a93c77180f4f37f1d23fa23ba
Signed-off-by: Xiaoming Sui <xiaoming.sui@amlogic.com>
PD#SWPL-14563
Problem:
hdcp_rx22 passed a wrong HPI address to hdmirx driver,
and cause HPI address request_mem_region fail
Solution:
Use the correct HPI address when request_mem_region called.
Verify:
TL1
Change-Id: I80bd6323ae4959edf3c792758568c581024536bb
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
PD#SWPL-14550
Problem:
deinterlance1-Chapter#1 in sony test pattern,
the "ok" display abnormal.
Solution:
from yanling(VLSI), bencheng.jing
change mxcmbY from 1 to 3;
add combing_bias_motion_setting and
combing_very_motion_setting for 480i;
Verify:
x301
Change-Id: Ida2b432af80a2bd5937f13b3f7a4a030b9b0cfaa
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#SWPL-14596
Problem:
some g12a chip,efuse map for enet is diff
So need compatible for these chip
Solution:
read valid bit from valid block,not data block
Verify:
verified by tl1 and g12a
Change-Id: I564209d865cbc2ff1151df07d06593b12ea225d8
Signed-off-by: qi duan <qi.duan@amlogic.com>
PD#SWPL-11557
Problem:
Some scenes flicker badly, such as the roof
Solution:
The modification requirements come from,
yanling(VLSI), bencheng.jing
a. patch 62052:
need change mtn parameter back to old for local 1080i;
b. patch 71464:
need fix combing_fix_en can not change;
Verify:
x301
Change-Id: I3e067930f0e4dea9f300e888a6ee3f96caf987fb
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#SWPL-13874
Problem:
DV sdk test, for sdr/hdr/dv to hdr cases
DRM infoframe primaries in GBR order
Solution:
DV enable, send primaries in RGB order
Verify:
None
Change-Id: I0229179592203aba5e2a388a572b0061fa21a48f
Signed-off-by: robin zhu <robin.zhu@amlogic.com>
PD#SWPL-11894
Problem:
glitch time in bl31 may not be updated after hdcp22 unmux,
because get hdcp auth result function in bl31 will not be
called after hdcp mode set to 0. In a result, the glitch
hdcp22 result may take place of the actual hdcp22 auth
status after mode change, and feedback to systemcontrol
to clear/set video mute by wrong
Solution:
force to update glitch time after hdcp22 unmux
Verify:
U200/g12a
Change-Id: I497ead5f8f5c46959560ffc0c8702acca1a3f46c
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>
PD#SH-875
Problem:
add county and langurage prop via unifykey for gva
Solution:
add county and langurage prop via unifykey for gva
Verify:
S420
Change-Id: Icf5f7c3f44d93fbcaf2be3410e0c04289549c555
Signed-off-by: jinrong.liao <jinrong.liao@amlogic.com>
PD#SWPL-14271
Problem:
av pali green block dark in colorbar left bottom corner
Solution:
update 0x125 setting for tl1 av ntsc-m/pali
Verify:
x301
Change-Id: Icb759a39c1265ac043b888b55f3ccaf12661cafe
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
PD#TV-10438
Problem:
system can be wake up by any IR key
Solution:
Add IRQF_NO_SUSPEND to avoid IR interrupt being seen as wakeup source IRQ
When IR irq check current key is power key, then send pm_wakeup_event()
Verify:
X32A0-T972
Change-Id: I753fe15f859480954bb569f2da3d3e0dd93c29e3
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
PD#TV-1924
Problem:
Sticky register which control compress in bl2z will always be set
if ramdump driver probed.
Solution:
If ramdump is disabled by envrioment under uboot. sticky register
should not set for not enter compress under bl2z
Verify:
x301
Change-Id: I1f41c98cebf7957f0dc214046e6d011e08c326de
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
PD#TV-9856
Problem:
need change display driver for cool boot to enter
kernel stage freeze mode
Solution:
add lcd_panel_ctrl to control lcd display
Verify:
t962x2-x301
Change-Id: I8b58ab0a0f87c49791af7dddf7b05db37f7ad716
Signed-off-by: shaochan.liu <shaochan.liu@amlogic.com>
PD#SWPL-14477
Problem:
the picture is rotated 90 degrees,
stretching left and right
Solution:
modify conditions for frame width or height
equal to screen width or height
Verify:
verify by g12b-w400
Change-Id: I0ca9cc255b202306562bee69726400c697f3b053
Signed-off-by: Cao Jian <jian.cao@amlogic.com>
PD#SWPL-14053
Problem:
Read and write simultaneously on two disks on a hub,
and then the XHCI controller would halted.
Solution:
Set the GUCTL1 BIT 17 to 1 for disable park mode.
Verify:
test pass on u200, ODROID-N2
Change-Id: I007804fa6b97a103da4a05be12c1193b9dd422cb
Signed-off-by: he.he <he.he@amlogic.com>
PD#SWPL-13967
Problem:
unchecked return value of regmap_write
Solution:
to check the return value
Verify:
test pass on g12a
Change-Id: Ibb45e36d7c24f0e0ea8b14da75e887321ee5b791
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
PD#SWPL-14418
Problem:
DI issue causes platform crash to restart
when do DTV 2s channel switch+15s suspend
Solution:
use active_flg to protect tasklet_schedule
Verify:
tl1
Change-Id: I91028a039d8b1799b131a953bef4877f70a2f697
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#TV-10251
Problem:
PE190005-1038 press the OK button switching to
the ATV channel, the screen is not full screen.
Solution:
After the video property changes, if the hold video
is enabled, the current frame needs to be refreshed.
Verify:
Verified with X301
Change-Id: I05cb7255147b1950cb6b9d5813148a9ce0aa6e66
Signed-off-by: Rui Wang <rui.wang@amlogic.com>
PD#SWPL-13834
Problem:
Dropping dv frame triggers parser_matedata which updates
the new_dovi_setting. Before rendering the first frame,
keep frame is displayed. However, keep frame requires
toggle, which updates the dovi_setting from new_dovi_setting,
causing color error in keep frame
Solution:
Dropping frame don't update new_dovi_setting
Verify:
passed on sm1
Change-Id: I1c73ba6f7d192066e3d5f9439ccbedc6d610d6eb
Signed-off-by: yao liu <yao.liu@amlogic.com>
PD#SWPL-14319
Problem:
adjust the contrast in full range
Solution:
change to limit range
Verify:
verified by tl1
Change-Id: Icfa3c128c2943e30f2710dad5181c1d85dd32095
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
PD#TV-9972
Problem:
first sound carrier no output in nicam system.
Solution:
1.fix first sound carrier output in nicam system.
Verify:
Verified by TL1.
Change-Id: Ib89b6a5300a1ebeb9e61bbb3acb6356e2abab08f
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
PD#SWPL-14142
Problem:
display abnormal after play 1 hour.
this is because rdma can't been called in two thread.
mc update bit in hw timer, this causes pps's register
to be set incorrectly.
Solution:
call mc update function in video.c
Verify:
txlx
Change-Id: I750aa5c242a1077691f82c3b2361ee46b3202313
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#SWPL-14260
Problem:
variable reg_req_flag_irq is redundant and
it has a probability of causing error reg.
Solution:
delete this variable.
Verify:
tl1
Change-Id: I807f32789acdf4b8e0fea88f9786a301638460ff
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#SWPL-14323
Problem:
Kernel and uboot is not sync: When kernel startup
without hdmi,dolby_vision_on is not set to true
even if dv is on in uboot. This lead to dv core
can't turn off when bypass dv in sdr->sdr case.
Solution:
Regardless of connecting to hdmi, as long as uboot
turn on dv, set dolby_vision_on up
Verify:
verify on sm1
Change-Id: I704c833c0b099637ea08b255b6cd380199ea0148
Signed-off-by: yao liu <yao.liu@amlogic.com>
PD#TV-9668
Problem:
If sp address is in linear mapping range, check_sp_fault_again
function in vmap fault handler will still map a new page for it.
This will cause some data in R/W section polluted.
Solution:
Avoid map page if sp is in linear range.
Verify:
TL1 x301
Change-Id: I0e02a2048b586854c528cd3eeafb725751b9dc82
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
PD#TV-9668
Problem:
After cpu idle enabled, watch point event register will be cleared
if cpu exit pm(idle). This will cause watch point can't work.
Solution:
re-enable watch point after cpu exit pm(idle)
Verify:
TL1
Change-Id: I4fc2002eaabecd4c5e60a5916bc29e0107882bec
Signed-off-by: Tao Zeng <tao.zeng@amlogic.com>
PD#SWPL-14256
Problem:
When ATV Mode has no signal
the bright line interference at the bottom
if freescale height is set to vinfo height
Solution:
modify VPP_OSD_SC_DUMMY_DATA alpha value
Verify:
verified on txlx-r311
Change-Id: I48bbb1be533a88e8b3c622550a0a2e8c07f2a863
Signed-off-by: Cao Jian <jian.cao@amlogic.com>
PD#SWPL-14333
Problem:
invalid address is allowed for register program
which cause kernel panic
Solution:
add protection, programming on invalid addr will
be terminated
Verify:
tl1
Change-Id: I44bedec256ee5c386b53188fb2d8e40ae8c3f553
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
PD#SWPL-13969
Problem:
In sysfs.c, return value of class_register is not checked.
Solution:
check return value of class_register
Verify:
local coverity check
Change-Id: If8deb3e388e784650e4812257143c3ac919c2d9a
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
PD#SWPL-6863
Problem:
eARCRX/ARCRX function for sm1/tm2
Solution:
add eARCRX/ARCRX driver for sm1/tm2
plug in/out HDMI cable, notify user space current attended type
Verify:
tested on ac200, ab311
Change-Id: I0332723ef9c9d45f7797df38a7077561fddb13bf
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
PD#SWPL-8980
Problem:
bright edge at the top when beans falling
Solution:
revert the setting of top two lines do weave to Feijun's suggestions
Verify:
TL1
Change-Id: I314e0d23e4e7c00939bd0203cd821144274fbf9e
Signed-off-by: Wenfeng Guo <wenfeng.guo@amlogic.com>
PD#OTT-5999
[Problem]
In binder_transaction of binder.c, there is a possible out of bounds
write due to an integer overflow. This could lead to local escalation of
privilege with noadditional execution privileges needed. User interaction
is needed for exploitation.
The fix is designed to check for the integer overflow.
[Solution]
UPSTREAM: binder: check for overflow when alloc for security context
commit 0b0509508b upstream.
When allocating space in the target buffer for the security context,
make sure the extra_buffers_size doesn't overflow. This can only
happen if the given size is invalid, but an overflow can turn it
into a valid size. Fail the transaction if an overflow is detected.
Bug: 130571081
Change-Id: Ibaec652d2073491cc426a4a24004a848348316bf
Signed-off-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
