Energy cost estimation has been a long lasting challenge for WALT
because WALT guides CPU frequency based on the CPU utilization of
previous window. Consequently it's not possible to know newly
waking-up task's energy cost until WALT's end of the current window.
The WALT already tracks 'Previous Runnable Sum' (prev_runnable_sum)
and 'Cumulative Runnable Average' (cr_avg). They are designed for
CPU frequency guidance and task placement but unfortunately both
are not suitable for the energy cost estimation.
It's because using prev_runnable_sum for energy cost calculation would
make us to account CPU and task's energy solely based on activity in the
previous window so for example, any task didn't have an activity in the
previous window will be accounted as a 'zero energy cost' task.
Energy estimation with cr_avg is what energy_diff() relies on at present.
However cr_avg can only represent instantaneous picture of energy cost
thus for example, if a CPU was fully occupied for an entire WALT window
and became idle just before window boundary, and if there is a wake-up,
energy_diff() accounts that CPU is a 'zero energy cost' CPU.
As a result, introduce a new accounting unit 'Cumulative Window Demand'.
The cumulative window demand tracks all the tasks' demands have seen in
current window which is neither instantaneous nor actual execution time.
Because task demand represents estimated scaled execution time when the
task runs a full window, accumulation of all the demands represents
predicted CPU load at the end of window.
Thus we can estimate CPU's frequency at the end of current WALT window
with the cumulative window demand.
The use of prev_runnable_sum for the CPU frequency guidance and cr_avg
for the task placement have not changed and these are going to be used
for both purpose while this patch aims to add an additional statistics.
Change-Id: I9908c77ead9973a26dea2b36c001c2baf944d4f5
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
(cherry picked from commit 43bd960dfe)
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
In order to set rq->misfit_task in time, call update_task_ravg() prior
to task_tick. This reduces upmigration delay by 1 scheduler window.
Change-Id: I7cc80badd423f2e7684125fbfd853b0a3610f0e8
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org>
(cherry picked from commit ed9e749668)
[Trivial cherry-pick issue]
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
At present need_active_balance() determines whether an active
upmigration is needed by using capacity_of(). A CPU's capacity
may be reduced by RT pressure, and therefore distinguishing
capability differences with capacity_of() may lead to suboptimal
active migrations to less capable CPUs. Use capacity_orig_of
to distinguish differently capable CPUs in addition to
capacity_of(), thus avoiding placing tasks on less capable CPUs
due to instantaneous RT pressure.
Change-Id: I3e1435246a8edc3ad618ef98a34866cfbd8c16a5
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
[markivx: Reworked the commit text a bit]
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org>
(cherry picked from commit 7ab48e4c8d)
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
There's no need for a separate hierarchy of notifiers, APIs
and variables in walt.c for the purpose of applying frequency
and IPC invariance. Let's just use capacity_curr_of and get
rid of a lot of the infrastructure relating to capacity,
load_scale_factor etc.
Change-Id: Ia220e2c896373fa535db05bff60f9aa33aefc978
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org>
(cherry picked from commit be832f69a9)
[Trivial cherry pick issues]
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
Currently it is possible to add or update socket policies, but
not clear them. Therefore, once a socket policy has been applied,
the socket cannot be used for unencrypted traffic.
This patch allows (privileged) users to clear socket policies by
passing in a NULL pointer and zero length argument to the
{IP,IPV6}_{IPSEC,XFRM}_POLICY setsockopts. This results in both
the incoming and outgoing policies being cleared.
The simple approach taken in this patch cannot clear socket
policies in only one direction. If desired this could be added
in the future, for example by continuing to pass in a length of
zero (which currently is guaranteed to return EMSGSIZE) and
making the policy be a pointer to an integer that contains one
of the XFRM_POLICY_{IN,OUT} enum values.
An alternative would have been to interpret the length as a
signed integer and use XFRM_POLICY_IN (i.e., 0) to clear the
input policy and -XFRM_POLICY_OUT (i.e., -1) to clear the output
policy.
Tested: https://android-review.googlesource.com/539816
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Changes in 4.9.66
s390: fix transactional execution control register handling
s390/runtime instrumention: fix possible memory corruption
s390/disassembler: add missing end marker for e7 table
s390/disassembler: increase show_code buffer size
ACPI / EC: Fix regression related to triggering source of EC event handling
x86/mm: fix use-after-free of vma during userfaultfd fault
ipv6: only call ip6_route_dev_notify() once for NETDEV_UNREGISTER
vsock: use new wait API for vsock_stream_sendmsg()
sched: Make resched_cpu() unconditional
lib/mpi: call cond_resched() from mpi_powm() loop
x86/decoder: Add new TEST instruction pattern
x86/entry/64: Add missing irqflags tracing to native_load_gs_index()
arm64: Implement arch-specific pte_access_permitted()
ARM: 8722/1: mm: make STRICT_KERNEL_RWX effective for LPAE
ARM: 8721/1: mm: dump: check hardware RO bit for LPAE
MIPS: ralink: Fix MT7628 pinmux
MIPS: ralink: Fix typo in mt7628 pinmux function
PCI: Set Cavium ACS capability quirk flags to assert RR/CR/SV/UF
ALSA: hda: Add Raven PCI ID
dm bufio: fix integer overflow when limiting maximum cache size
dm: allocate struct mapped_device with kvzalloc
MIPS: pci: Remove KERN_WARN instance inside the mt7620 driver
dm: fix race between dm_get_from_kobject() and __dm_destroy()
MIPS: Fix odd fp register warnings with MIPS64r2
MIPS: dts: remove bogus bcm96358nb4ser.dtb from dtb-y entry
MIPS: Fix an n32 core file generation regset support regression
MIPS: BCM47XX: Fix LED inversion for WRT54GSv1
rt2x00usb: mark device removed when get ENOENT usb error
autofs: don't fail mount for transient error
nilfs2: fix race condition that causes file system corruption
eCryptfs: use after free in ecryptfs_release_messaging()
libceph: don't WARN() if user tries to add invalid key
bcache: check ca->alloc_thread initialized before wake up it
isofs: fix timestamps beyond 2027
NFS: Fix typo in nomigration mount option
nfs: Fix ugly referral attributes
NFS: Avoid RCU usage in tracepoints
nfsd: deal with revoked delegations appropriately
rtlwifi: rtl8192ee: Fix memory leak when loading firmware
rtlwifi: fix uninitialized rtlhal->last_suspend_sec time
ata: fixes kernel crash while tracing ata_eh_link_autopsy event
ext4: fix interaction between i_size, fallocate, and delalloc after a crash
ALSA: pcm: update tstamp only if audio_tstamp changed
ALSA: usb-audio: Add sanity checks to FE parser
ALSA: usb-audio: Fix potential out-of-bound access at parsing SU
ALSA: usb-audio: Add sanity checks in v2 clock parsers
ALSA: timer: Remove kernel warning at compat ioctl error paths
ALSA: hda: Fix too short HDMI/DP chmap reporting
ALSA: hda/realtek - Fix ALC700 family no sound issue
fix a page leak in vhost_scsi_iov_to_sgl() error recovery
fs/9p: Compare qid.path in v9fs_test_inode
iscsi-target: Fix non-immediate TMR reference leak
target: Fix QUEUE_FULL + SCSI task attribute handling
mtd: nand: omap2: Fix subpage write
mtd: nand: Fix writing mtdoops to nand flash.
mtd: nand: mtk: fix infinite ECC decode IRQ issue
p54: don't unregister leds when they are not initialized
block: Fix a race between blk_cleanup_queue() and timeout handling
irqchip/gic-v3: Fix ppi-partitions lookup
lockd: double unregister of inetaddr notifiers
KVM: nVMX: set IDTR and GDTR limits when loading L1 host state
KVM: SVM: obey guest PAT
SUNRPC: Fix tracepoint storage issues with svc_recv and svc_rqst_status
clk: ti: dra7-atl-clock: fix child-node lookups
libnvdimm, pfn: make 'resource' attribute only readable by root
libnvdimm, namespace: fix label initialization to use valid seq numbers
libnvdimm, namespace: make 'resource' attribute only readable by root
IB/srpt: Do not accept invalid initiator port names
IB/srp: Avoid that a cable pull can trigger a kernel crash
NFC: fix device-allocation error return
i40e: Use smp_rmb rather than read_barrier_depends
igb: Use smp_rmb rather than read_barrier_depends
igbvf: Use smp_rmb rather than read_barrier_depends
ixgbevf: Use smp_rmb rather than read_barrier_depends
i40evf: Use smp_rmb rather than read_barrier_depends
fm10k: Use smp_rmb rather than read_barrier_depends
ixgbe: Fix skb list corruption on Power systems
parisc: Fix validity check of pointer size argument in new CAS implementation
powerpc/signal: Properly handle return value from uprobe_deny_signal()
media: Don't do DMA on stack for firmware upload in the AS102 driver
media: rc: check for integer overflow
cx231xx-cards: fix NULL-deref on missing association descriptor
media: v4l2-ctrl: Fix flags field on Control events
sched/rt: Simplify the IPI based RT balancing logic
fscrypt: lock mutex before checking for bounce page pool
net/9p: Switch to wait_event_killable()
PM / OPP: Add missing of_node_put(np)
Revert "drm/i915: Do not rely on wm preservation for ILK watermarks"
e1000e: Fix error path in link detection
e1000e: Fix return value test
e1000e: Separate signaling for link check/link up
e1000e: Avoid receiver overrun interrupt bursts
RDS: make message size limit compliant with spec
RDS: RDMA: return appropriate error on rdma map failures
RDS: RDMA: fix the ib_map_mr_sg_zbva() argument
PCI: Apply _HPX settings only to relevant devices
drm/sun4i: Fix a return value in case of error
clk: sunxi-ng: A31: Fix spdif clock register
clk: sunxi-ng: fix PLL_CPUX adjusting on A33
dmaengine: zx: set DMA_CYCLIC cap_mask bit
fscrypt: use ENOKEY when file cannot be created w/o key
fscrypt: use ENOTDIR when setting encryption policy on nondirectory
net: Allow IP_MULTICAST_IF to set index to L3 slave
net: 3com: typhoon: typhoon_init_one: make return values more specific
net: 3com: typhoon: typhoon_init_one: fix incorrect return values
drm/armada: Fix compile fail
rt2800: set minimum MPDU and PSDU lengths to sane values
adm80211: return an error if adm8211_alloc_rings() fails
mwifiex: sdio: fix use after free issue for save_adapter
ath10k: fix incorrect txpower set by P2P_DEVICE interface
ath10k: ignore configuring the incorrect board_id
ath10k: fix potential memory leak in ath10k_wmi_tlv_op_pull_fw_stats()
pinctrl: sirf: atlas7: Add missing 'of_node_put()'
bnxt_en: Set default completion ring for async events.
ath10k: set CTS protection VDEV param only if VDEV is up
ALSA: hda - Apply ALC269_FIXUP_NO_SHUTUP on HDA_FIXUP_ACT_PROBE
gpio: mockup: dynamically allocate memory for chip name
drm: Apply range restriction after color adjustment when allocation
clk: qcom: ipq4019: Add all the frequencies for apss cpu
drm/mediatek: don't use drm_put_dev
mac80211: Remove invalid flag operations in mesh TSF synchronization
mac80211: Suppress NEW_PEER_CANDIDATE event if no room
adm80211: add checks for dma mapping errors
iio: light: fix improper return value
staging: iio: cdc: fix improper return value
spi: SPI_FSL_DSPI should depend on HAS_DMA
netfilter: nft_queue: use raw_smp_processor_id()
netfilter: nf_tables: fix oob access
ASoC: rsnd: don't double free kctrl
crypto: marvell - Copy IVDIG before launching partial DMA ahash requests
btrfs: return the actual error value from from btrfs_uuid_tree_iterate
ASoC: wm_adsp: Don't overrun firmware file buffer when reading region data
s390/kbuild: enable modversions for symbols exported from asm
cec: when canceling a message, don't overwrite old status info
cec: CEC_MSG_GIVE_FEATURES should abort for CEC version < 2
cec: update log_addr[] before finishing configuration
nvmet: fix KATO offset in Set Features
xen: xenbus driver must not accept invalid transaction ids
Linux 4.9.66
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
[ Upstream commit 639b08810d ]
When accessing Xenstore in a transaction the user is specifying a
transaction id which he normally obtained from Xenstore when starting
the transaction. Xenstore is validating a transaction id against all
known transaction ids of the connection the request came in. As all
requests of a domain not being the one where Xenstore lives share
one connection, validation of transaction ids of different users of
Xenstore in that domain should be done by the kernel of that domain
being the multiplexer between the Xenstore users in that domain and
Xenstore.
In order to prohibit one Xenstore user "hijacking" a transaction from
another user the xenbus driver has to verify a given transaction id
against all known transaction ids of the user before forwarding it to
Xenstore.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6c73f94930 ]
The Set Features implementation for Keep Alive Timer was using the wrong
structure when retrieving the KATO value; it was treating the Set
Features command as a Property Set command.
The NVMe spec defines the Keep Alive Timer feature as having one input
in CDW11 (4 bytes at offset 44 in the command) whereas the code was
reading 8 bytes at offset 48.
Since the Linux NVMe over Fabrics host never sets this feature, this
code has presumably never been tested.
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7af26f889e ]
The loop that sets the unused logical addresses to INVALID should be
done before 'configured' is set to true. This ensures that cec_log_addrs
is consistent before it will be used.
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a24f56d479 ]
This is a 2.0 only message, so it should return Feature Abort if the
adapter is configured for CEC version 1.4.
Right now it does nothing, which means that the sender will time out.
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1204761236 ]
When a pending message was canceled (e.g. due to a timeout), then the
old tx_status info was overwritten instead of ORed. The same happened
with the tx_error_cnt field. So just modify them instead of overwriting
them.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cabab3f9f5 ]
s390 version of commit 334bb77387 ("x86/kbuild: enable modversions
for symbols exported from asm") so we get also rid of all these
warnings:
WARNING: EXPORT symbol "_mcount" [vmlinux] version generation failed, symbol will not be versioned.
WARNING: EXPORT symbol "memcpy" [vmlinux] version generation failed, symbol will not be versioned.
WARNING: EXPORT symbol "memmove" [vmlinux] version generation failed, symbol will not be versioned.
WARNING: EXPORT symbol "memset" [vmlinux] version generation failed, symbol will not be versioned.
WARNING: EXPORT symbol "save_fpu_regs" [vmlinux] version generation failed, symbol will not be versioned.
WARNING: EXPORT symbol "sie64a" [vmlinux] version generation failed, symbol will not be versioned.
WARNING: EXPORT symbol "sie_exit" [vmlinux] version generation failed, symbol will not be versioned.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8759fec4af ]
Currently, inner IV/DIGEST data are only copied once into the hash
engines and not set explicitly before launching a request that is not a
first frag. This is an issue especially when multiple ahash reqs are
computed in parallel or chained with cipher request, as the state of the
request being computed is not updated into the hash engine. It leads to
non-deterministic corrupted digest results.
Fixes: commit 2786cee8e5 ("crypto: marvell - Move SRAM I/O operations to step functions")
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0ea617a298 ]
On an error, snd_ctl_add already free's kctrl, so calling snd_ctl_free_one
to free it again leads to a double free error. Fix this by removing
the extraneous snd_ctl_free_one call.
Issue found using static analysis with CoverityScan, CID 1372908
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3e38df136e ]
BUG: KASAN: slab-out-of-bounds in nf_tables_rule_destroy+0xf1/0x130 at addr ffff88006a4c35c8
Read of size 8 by task nft/1607
When we've destroyed last valid expr, nft_expr_next() returns an invalid expr.
We must not dereference it unless it passes != nft_expr_last() check.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c2e756ff9e ]
Using smp_processor_id() causes splats with PREEMPT_RCU:
[19379.552780] BUG: using smp_processor_id() in preemptible [00000000] code: ping/32389
[19379.552793] caller is debug_smp_processor_id+0x17/0x19
[...]
[19379.552823] Call Trace:
[19379.552832] [<ffffffff81274e9e>] dump_stack+0x67/0x90
[19379.552837] [<ffffffff8129a4d4>] check_preemption_disabled+0xe5/0xf5
[19379.552842] [<ffffffff8129a4fb>] debug_smp_processor_id+0x17/0x19
[19379.552849] [<ffffffffa07c42dd>] nft_queue_eval+0x35/0x20c [nft_queue]
No need to disable preemption since we only fetch the numeric value, so
let's use raw_smp_processor_id() instead.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 91ca1a8c58 ]
At the end of function ad7150_write_event_config(), directly returns 0.
As a result, the errors will be ignored by the callers. It may be better
to return variable "ret".
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit db4e5376d0 ]
In function cm3232_reg_init(), it returns 0 even if the last call to
i2c_smbus_write_byte_data() returns a negative value (indicates error).
As a result, the return value may be inconsistent with the execution
status, and the caller of cm3232_reg_init() will not be able to detect
the error. This patch fixes the bug.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188641
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d15697de60 ]
The driver does not check if mapping dma memory succeed.
The patch adds the checks and failure handling.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 76f43b4c0a ]
mesh_sync_offset_adjust_tbtt() implements Extensible synchronization
framework ([1] 13.13.2 Extensible synchronization framework). It shall
not operate the flag "TBTT Adjusting subfield" ([1] 8.4.2.100.8 Mesh
Capability), since it is used only for MBCA ([1] 13.13.4 Mesh beacon
collision avoidance, see 13.13.4.4.3 TBTT scanning and adjustment
procedures for detail). So this patch remove the flag operations.
[1] IEEE Std 802.11 2012
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
[remove adjusting_tbtt entirely, since it's now unused]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ad6d8004fa ]
Currently the chip name buffer is allocated on the stack and the
address of the buffer is passed to the gpio framework. It's invalid
after probe() returns, so the sysfs label attribute displays garbage.
Use devm_kasprintf() for each string instead.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 972aa2c708 ]
Setting shutup when the action is HDA_FIXUP_ACT_PRE_PROBE might
not have the desired effect since it could be overridden by
another more generic shutup function. Prevent this by setting
the more specific shutup function on HDA_FIXUP_ACT_PROBE.
Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 486b5c22ea ]
With the added support for the bnxt_re RDMA driver, both drivers can be
allocating completion rings in any order. The firmware does not know
which completion ring should be receiving async events. Add an
extra step to tell firmware the completion ring number for receiving
async events after bnxt_en allocates the completion rings.
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 097e46d2ae ]
ath10k_wmi_tlv_op_pull_fw_stats() uses tb = ath10k_wmi_tlv_parse_alloc(...)
function, which allocates memory. If any of the three error-paths are
taken, this tb needs to be freed.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d2e202c06c ]
With command to get board_id from otp, in the case of following
boot get otp board id result 0x00000000 board_id 0 chip_id 0
boot using board name 'bus=pci,bmi-chip-id=0,bmi-board-id=0"
...
failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=0 from
ath10k/QCA6174/hw3.0/board-2.bin
The invalid board_id=0 will be used as index to search in the board-2.bin.
Ignore the case with board_id=0, as it means the otp is not carrying
the board id information.
Signed-off-by: Ryan Hsu <ryanhsu@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 88407beb1b ]
Ath10k reports the phy capability that supports P2P_DEVICE interface.
When we use the P2P supported wpa_supplicant to start connection, it'll
create two interfaces, one is wlan0 (vdev_id=0) and one is P2P_DEVICE
p2p-dev-wlan0 which is for p2p control channel (vdev_id=1).
ath10k_pci mac vdev create 0 (add interface) type 2 subtype 0
ath10k_add_interface: vdev_id: 0, txpower: 0, bss_power: 0
...
ath10k_pci mac vdev create 1 (add interface) type 2 subtype 1
ath10k_add_interface: vdev_id: 1, txpower: 0, bss_power: 0
And the txpower in per vif bss_conf will only be set to valid tx power when
the interface is assigned with channel_ctx.
But this P2P_DEVICE interface will never be used for any connection, so
that the uninitialized bss_conf.txpower=0 is assinged to the
arvif->txpower when interface created.
Since the txpower configuration is firmware per physical interface.
So the smallest txpower of all vifs will be the one limit the tx power
of the physical device, that causing the low txpower issue on other
active interfaces.
wlan0: Limiting TX power to 21 (24 - 3) dBm
ath10k_pci mac vdev_id 0 txpower 21
ath10k_mac_txpower_recalc: vdev_id: 1, txpower: 0
ath10k_mac_txpower_recalc: vdev_id: 0, txpower: 21
ath10k_pci mac txpower 0
This issue only happens when we use the wpa_supplicant that supports
P2P or if we use the iw tool to create the control P2P_DEVICE interface.
Signed-off-by: Ryan Hsu <ryanhsu@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 74c8719b8e ]
If we have sdio work requests received when sdio card reset is
happening, we may end up accessing older save_adapter pointer
later which is already freed during card reset.
This patch solves the problem by cancelling those pending requests.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7bb387c5ab ]
IP_MULTICAST_IF fails if sk_bound_dev_if is already set and the new index
does not match it. e.g.,
ntpd[15381]: setsockopt IP_MULTICAST_IF 192.168.1.23 fails: Invalid argument
Relax the check in setsockopt to allow setting mc_index to an L3 slave if
sk_bound_dev_if points to an L3 master.
Make a similar change for IPv6. In this case change the device lookup to
take the rcu_read_lock avoiding a refcnt. The rcu lock is also needed for
the lookup of a potential L3 master device.
This really only silences a setsockopt failure since uses of mc_index are
secondary to sk_bound_dev_if if it is set. In both cases, if either index
is an L3 slave or master, lookups are directed to the same FIB table so
relaxing the check at setsockopt time causes no harm.
Patch is based on a suggested change by Darwin for a problem noted in
their code base.
Suggested-by: Darwin Dingel <darwin.dingel@alliedtelesis.co.nz>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dffd0cfa06 ]
As part of an effort to clean up fscrypt-related error codes, make
FS_IOC_SET_ENCRYPTION_POLICY fail with ENOTDIR when the file descriptor
does not refer to a directory. This is more descriptive than EINVAL,
which was ambiguous with some of the other error cases.
I am not aware of any users who might be relying on the previous error
code of EINVAL, which was never documented anywhere, and in some buggy
kernels did not exist at all as the S_ISDIR() check was missing.
This failure case will be exercised by an xfstest.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 54475f531b ]
As part of an effort to clean up fscrypt-related error codes, make
attempting to create a file in an encrypted directory that hasn't been
"unlocked" fail with ENOKEY. Previously, several error codes were used
for this case, including ENOENT, EACCES, and EPERM, and they were not
consistent between and within filesystems. ENOKEY is a better choice
because it expresses that the failure is due to lacking the encryption
key. It also matches the error code returned when trying to open an
encrypted regular file without the key.
I am not aware of any users who might be relying on the previous
inconsistent error codes, which were never documented anywhere.
This failure case will be exercised by an xfstest.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fc318d64f3 ]
The zx_dma driver supports cyclic transfer mode. Let's set DMA_CYCLIC
cap_mask bit to make that clear, and avoid unnecessary failure when
clients request channel via dma_request_chan_by_mask() with DMA_CYCLIC
bit set in mask.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 790d929b54 ]
When adjusting PLL_CPUX on A33, the PLL is temporarily driven too high,
and the system hangs.
Add a notifier to avoid this situation by temporarily switching to a
known stable 24 MHz oscillator.
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 70421257c0 ]
As the SPDIF was rarely documented on the earlier Allwinner SoCs
it was assumed that it had a similar clock register to the one
described in the H3 User Manual.
However this is not the case and it looks to shares the same setup
as the I2S clock registers.
Signed-off-by: Marcus Cooper <codekipper@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0f0861e31e ]
If 'sun4i_backend_drm_format_to_layer()' does not return 0, then 'val' is
left unmodified.
As it is not initialized either, the return value can be anything.
It is likely that returning the error code was expected here.
As the only caller of 'sun4i_backend_update_layer_formats()' does not check
the return value, this fix is purely theorical.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Sasha Levin <alexander.levin@verizon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
