Extend the action stats callback implementation to update stats for actions
that are associated with hw counters.
Note that the callback may be called from tc action utility or from tc
flower. Both apis expect the driver to return the stats difference from
the last update. As such, query the raw counter value and maintain
the diff from the last api call in the tc layer, instead of the fs_core
layer.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are currently two mechanisms for populating hardware stats:
1. Using flow_offload api to query the flow's statistics.
The api assumes that the same stats values apply to all
the flow's actions.
This assumption breaks when action drops or jumps over following
actions.
2. Using hw_action api to query specific action stats via a driver
callback method. This api assures the correct action stats for
the offloaded action, however, it does not apply to the rest of the
actions in the flow's actions array.
Extend the flow_offload stats callback to indicate that a per action
stats update is required.
Use the existing flow_offload_action api to query the action's hw stats.
In addition, currently the tc action stats utility only updates hw actions.
Reuse the existing action stats cb infrastructure to query any action
stats.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently a hardware action is uniquely identified by the <id, hw_index>
tuple. However, the id is set by the flow_act_setup callback and tc core
cannot enforce this, and it is possible that a future change could break
this. In addition, <id, hw_index> are not unique across network namespaces.
Uniquely identify the action by setting an action cookie by the tc core.
Use the unique action cookie to query the action's hardware stats.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Creates three new drop reasons:
SKB_DROP_REASON_IPV6_NDISC_FRAG: invalid frag (suppress_frag_ndisc).
SKB_DROP_REASON_IPV6_NDISC_HOP_LIMIT: invalid hop limit.
SKB_DROP_REASON_IPV6_NDISC_BAD_CODE: invalid NDISC icmp6 code.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Accurately reports what happened in icmpv6_notify() when handling
a packet.
This makes use of the new IPV6_BAD_EXTHDR drop reason.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pskb_may_pull() can fail for two different reasons.
Provide pskb_may_pull_reason() helper to distinguish
between these reasons.
It returns:
SKB_NOT_DROPPED_YET : Success
SKB_DROP_REASON_PKT_TOO_SMALL : packet too small
SKB_DROP_REASON_NOMEM : skb->head could not be resized
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This drop reason can be used whenever an IPv6 packet
has a malformed extension header.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add replacement for phy_ethtool_get/set_eee() functions.
Current phy_ethtool_get/set_eee() implementation is great and it is
possible to make it even better:
- this functionality is for devices implementing parts of IEEE 802.3
specification beyond Clause 22. The better place for this code is
phy-c45.c
- currently it is able to do read/write operations on PHYs with
different abilities to not existing registers. It is better to
use stored supported_eee abilities to avoid false read/write
operations.
- the eee_active detection will provide wrong results on not supported
link modes. It is better to validate speed/duplex properties against
supported EEE link modes.
- it is able to support only limited amount of link modes. We have more
EEE link modes...
By refactoring this code I address most of this point except of the last
one. Adding additional EEE link modes will need more work.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add generic function for EEE abilities defined by IEEE 802.3
specification. For now following registers are supported:
- IEEE 802.3-2018 45.2.3.10 EEE control and capability 1 (Register 3.20)
- IEEE 802.3cg-2019 45.2.1.186b 10BASE-T1L PMA status register
(Register 1.2295)
Since I was not able to find any flag signaling support of these
registers, we should detect link mode abilities first and then based on
these abilities doing EEE link modes detection.
Results of EEE ability detection will be stored into new variable
phydev->supported_eee.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to what was done for TX_PUSH, add an RX_PUSH concept
to the ethtool interfaces.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Probably due to copy-paste error, the name of the arg is "init_val"
which is misleading, as the pointer is used to point to struct where to
store the current value. Rename it to "val" and change the arg comment
a bit on the way.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driverinit param purpose is to serve the driver during init/reload
time to provide a value, either default or set by user.
Make sure that driver does not read value updated by user before the
reload is performed. Hold the new value in a separate struct and switch
it during reload.
Note that this is required to be eventually possible to call
devl_param_driverinit_value_get() without holding instance lock.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Luiz Augusto von Dentz says:
====================
pull-request: bluetooth-next
- Add new PID/VID 0489:e0f2 for MT7921
- Add VID:PID 13d3:3529 for Realtek RTL8821CE
- Add CIS feature bits to controller information
- Set Per Platform Antenna Gain(PPAG) for Intel controllers
* tag 'for-net-next-2023-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next:
Bluetooth: btintel: Set Per Platform Antenna Gain(PPAG)
Bluetooth: Make sure LE create conn cancel is sent when timeout
Bluetooth: Free potentially unfreed SCO connection
Bluetooth: hci_qca: get wakeup status from serdev device handle
Bluetooth: L2CAP: Fix potential user-after-free
Bluetooth: MGMT: add CIS feature bits to controller information
Bluetooth: hci_conn: Refactor hci_bind_bis() since it always succeeds
Bluetooth: HCI: Replace zero-length arrays with flexible-array members
Bluetooth: qca: Fix sparse warnings
Bluetooth: btusb: Add VID:PID 13d3:3529 for Realtek RTL8821CE
Bluetooth: btusb: Add new PID/VID 0489:e0f2 for MT7921
Bluetooth: Fix issue with Actions Semi ATS2851 based devices
====================
Link: https://lore.kernel.org/r/20230209234922.3756173-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
pull-request: bpf-next 2023-02-11
We've added 96 non-merge commits during the last 14 day(s) which contain
a total of 152 files changed, 4884 insertions(+), 962 deletions(-).
There is a minor conflict in drivers/net/ethernet/intel/ice/ice_main.c
between commit 5b246e533d ("ice: split probe into smaller functions")
from the net-next tree and commit 66c0e13ad2 ("drivers: net: turn on
XDP features") from the bpf-next tree. Remove the hunk given ice_cfg_netdev()
is otherwise there a 2nd time, and add XDP features to the existing
ice_cfg_netdev() one:
[...]
ice_set_netdev_features(netdev);
netdev->xdp_features = NETDEV_XDP_ACT_BASIC | NETDEV_XDP_ACT_REDIRECT |
NETDEV_XDP_ACT_XSK_ZEROCOPY;
ice_set_ops(netdev);
[...]
Stephen's merge conflict mail:
https://lore.kernel.org/bpf/20230207101951.21a114fa@canb.auug.org.au/
The main changes are:
1) Add support for BPF trampoline on s390x which finally allows to remove many
test cases from the BPF CI's DENYLIST.s390x, from Ilya Leoshkevich.
2) Add multi-buffer XDP support to ice driver, from Maciej Fijalkowski.
3) Add capability to export the XDP features supported by the NIC.
Along with that, add a XDP compliance test tool,
from Lorenzo Bianconi & Marek Majtyka.
4) Add __bpf_kfunc tag for marking kernel functions as kfuncs,
from David Vernet.
5) Add a deep dive documentation about the verifier's register
liveness tracking algorithm, from Eduard Zingerman.
6) Fix and follow-up cleanups for resolve_btfids to be compiled
as a host program to avoid cross compile issues,
from Jiri Olsa & Ian Rogers.
7) Batch of fixes to the BPF selftest for xdp_hw_metadata which resulted
when testing on different NICs, from Jesper Dangaard Brouer.
8) Fix libbpf to better detect kernel version code on Debian, from Hao Xiang.
9) Extend libbpf to add an option for when the perf buffer should
wake up, from Jon Doron.
10) Follow-up fix on xdp_metadata selftest to just consume on TX
completion, from Stanislav Fomichev.
11) Extend the kfuncs.rst document with description on kfunc
lifecycle & stability expectations, from David Vernet.
12) Fix bpftool prog profile to skip attaching to offline CPUs,
from Tonghao Zhang.
====================
Link: https://lore.kernel.org/r/20230211002037.8489-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now handle_fragments() in OVS and TC have the similar code, and
this patch removes the duplicate code by moving the function
to nf_conntrack_ovs.
Note that skb_clear_hash(skb) or skb->ignore_df = 1 should be
done only when defrag returns 0, as it does in other places
in kernel.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are almost the same code in ovs_skb_network_trim() and
tcf_ct_skb_network_trim(), this patch extracts them into a function
nf_ct_skb_network_trim() and moves the function to nf_conntrack_ovs.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
skbuff_head_cache is misnamed (perhaps for historical reasons?)
because it does not hold heads. Head is the buffer which skb->data
points to, and also where shinfo lives. struct sk_buff is a metadata
structure, not the head.
Eric recently added skb_small_head_cache (which allocates actual
head buffers), let that serve as an excuse to finally clean this up :)
Leave the user-space visible name intact, it could possibly be uAPI.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells says:
====================
rxrpc development
Here are some miscellaneous changes for rxrpc:
(1) Use consume_skb() rather than kfree_skb_reason().
(2) Fix unnecessary waking when poking and already-poked call.
(3) Add ack.rwind to the rxrpc_tx_ack tracepoint as this indicates how
many incoming DATA packets we're telling the peer that we are
currently willing to accept on this call.
(4) Reduce duplicate ACK transmission. We send ACKs to let the peer know
that we're increasing the receive window (ack.rwind) as we consume
packets locally. Normal ACK transmission is triggered in three places
and that leads to duplicates being sent.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If RPS is enabled, this allows configuring a default rps
mask, which is effective since receive queue creation time.
A default RPS mask allows the system admin to ensure proper
isolation, avoiding races at network namespace or device
creation time.
The default RPS mask is initially empty, and can be
modified via a newly added sysctl entry.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Userspace needs to know whether the adapter has feature support for
Connected Isochronous Stream - Central/Peripheral, so it can set up
LE Audio features accordingly.
Expose these feature bits as settings in MGMT controller info.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Pull networking fixes from Paolo Abeni:
"Including fixes from can and ipsec subtrees.
Current release - regressions:
- sched: fix off by one in htb_activate_prios()
- eth: mana: fix accessing freed irq affinity_hint
- eth: ice: fix out-of-bounds KASAN warning in virtchnl
Current release - new code bugs:
- eth: mtk_eth_soc: enable special tag when any MAC uses DSA
Previous releases - always broken:
- core: fix sk->sk_txrehash default
- neigh: make sure used and confirmed times are valid
- mptcp: be careful on subflow status propagation on errors
- xfrm: prevent potential spectre v1 gadget in xfrm_xlate32_attr()
- phylink: move phy_device_free() to correctly release phy device
- eth: mlx5:
- fix crash unsetting rx-vlan-filter in switchdev mode
- fix hang on firmware reset
- serialize module cleanup with reload and remove"
* tag 'net-6.2-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
selftests: forwarding: lib: quote the sysctl values
net: mscc: ocelot: fix all IPv6 getting trapped to CPU when PTP timestamping is used
rds: rds_rm_zerocopy_callback() use list_first_entry()
net: txgbe: Update support email address
selftests: Fix failing VXLAN VNI filtering test
selftests: mptcp: stop tests earlier
selftests: mptcp: allow more slack for slow test-case
mptcp: be careful on subflow status propagation on errors
mptcp: fix locking for in-kernel listener creation
mptcp: fix locking for setsockopt corner-case
mptcp: do not wait for bare sockets' timeout
net: ethernet: mtk_eth_soc: fix DSA TX tag hwaccel for switch port 0
nfp: ethtool: fix the bug of setting unsupported port speed
txhash: fix sk->sk_txrehash default
net: ethernet: mtk_eth_soc: fix wrong parameters order in __xdp_rxq_info_reg()
net: ethernet: mtk_eth_soc: enable special tag when any MAC uses DSA
net: sched: sch: Fix off by one in htb_activate_prios()
igc: Add ndo_tx_timeout support
net: mana: Fix accessing freed irq affinity_hint
hv_netvsc: Allocate memory in netvsc_dma_map() with GFP_ATOMIC
...
Marc Kleine-Budde says:
====================
can-next 2023-02-08
The 1st patch is by Oliver Hartkopp and cleans up the CAN_RAW's
raw_setsockopt() for CAN_RAW_FD_FRAMES.
The 2nd patch is by me and fixes the compilation if
CONFIG_CAN_CALC_BITTIMING is disabled. (Problem introduced in last
pull request to next-next.)
* tag 'linux-can-next-for-6.3-20230208' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: bittiming: can_calc_bittiming(): add missing parameter to no-op function
can: raw: use temp variable instead of rolling back config
====================
Link: https://lore.kernel.org/r/20230208210014.3169347-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Saeed Mahameed says:
====================
mlx5-next-netdev-deadlock
This series from Jiri solves a deadlock when removing a network namespace
with mlx5 devlink instance being in it.
The deadlock is between:
1) mlx5_ib->unregister_netdevice_notifier()
AND
2) mlx5_core->devlink_reload->cleanup_net()
To slove this introduced mlx5 netdev added/removed events to track uplink
netdev to be used for register_netdevice_notifier_dev_net() purposes.
* tag 'mlx5-next-netdev-deadlock' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
RDMA/mlx5: Track netdev to avoid deadlock during netdev notifier unregister
net/mlx5e: Propagate an internal event in case uplink netdev changes
net/mlx5e: Fix trap event handling
net/mlx5: Introduce CQE error syndrome
====================
Link: https://lore.kernel.org/r/20230208005626.72930-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Whenever uplink netdev is set/cleared, propagate newly introduced event
to inform notifier blocks netdev was added/removed.
Move the set() helper to core.c from header, introduce clear() and
netdev_added_event_replay() helpers. The last one is going to be called
from rdma driver, so export it.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In commit 286c0e09e8 ("can: bittiming: can_changelink() pass extack
down callstack") a new parameter was added to can_calc_bittiming(),
however the static inline no-op (which is used if
CONFIG_CAN_CALC_BITTIMING is disabled) wasn't converted.
Add the new parameter to the static inline no-op of
can_calc_bittiming().
Fixes: 286c0e09e8 ("can: bittiming: can_changelink() pass extack down callstack")
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/20230207201734.2905618-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Current taprio software implementation is haunted by the shadow of the
igb/igc hardware model. It iterates over child qdiscs in increasing
order of TXQ index, therefore giving higher xmit priority to TXQ 0 and
lower to TXQ N. According to discussions with Vinicius, that is the
default (perhaps even unchangeable) prioritization scheme used for the
NICs that taprio was first written for (igb, igc), and we have a case of
two bugs canceling out, resulting in a functional setup on igb/igc, but
a less sane one on other NICs.
To the best of my understanding, taprio should prioritize based on the
traffic class, so it should really dequeue starting with the highest
traffic class and going down from there. We get to the TXQ using the
tc_to_txq[] netdev property.
TXQs within the same TC have the same (strict) priority, so we should
pick from them as fairly as we can. We can achieve that by implementing
something very similar to q->curband from multiq_dequeue().
Since igb/igc really do have TXQ 0 of higher hardware priority than
TXQ 1 etc, we need to preserve the behavior for them as well. We really
have no choice, because in txtime-assist mode, taprio is essentially a
software scheduler towards offloaded child tc-etf qdiscs, so the TXQ
selection really does matter (not all igb TXQs support ETF/SO_TXTIME,
says Kurt Kanzenbach).
To preserve the behavior, we need a capability bit so that taprio can
determine if it's running on igb/igc, or on something else. Because igb
doesn't offload taprio at all, we can't piggyback on the
qdisc_offload_query_caps() call from taprio_enable_offload(), but
instead we need a separate call which is also made for software
scheduling.
Introduce two static keys to minimize the performance penalty on systems
which only have igb/igc NICs, and on systems which only have other NICs.
For mixed systems, taprio will have to dynamically check whether to
dequeue using one prioritization algorithm or using the other.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The LAN8841 is completely integrated triple-speed (10BASE-T/ 100BASE-TX/
1000BASE-T) Ethernet physical layer transceivers for transmission and
reception of data on standard CAT-5, as well as CAT-5e and CAT-6,
unshielded twisted pair (UTP) cables.
The LAN8841 offers the industry-standard GMII/MII as well as the RGMII.
Some of the features of the PHY are:
- Wake on LAN
- Auto-MDIX
- IEEE 1588-2008 (V2)
- LinkMD Capable diagnosis
Currently the patch offers support only for link configuration.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, each core device has VF pages counter which stores number of
fw pages used by its VFs and SFs.
The current design led to a hang when performing firmware reset on DPU,
where the DPU PFs stalled in sriov unload flow due to waiting on release
of SFs pages instead of waiting on only VFs pages.
Thus, Add a separate counter for SF firmware pages, which will prevent
the stall scenario described above.
Fixes: 1958fc2f07 ("net/mlx5: SF, Add auxiliary device driver")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Currently, an independent page counter is used for tracking memory usage
for each function type such as VF, PF and host PF (DPU).
For better code-readibilty, use a single array that stores
the number of allocated memory pages for each function type.
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The recently introduced sched_numa_hop_mask() exposes cpumasks of CPUs
reachable within a given distance budget, wrap the logic for iterating over
all (distance, mask) values inside an iterator macro.
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq has pointed out that drivers allocating IRQ vectors would benefit
from having smarter NUMA-awareness - cpumask_local_spread() only knows
about the local node and everything outside is in the same bucket.
sched_domains_numa_masks is pretty much what we want to hand out (a cpumask
of CPUs reachable within a given distance budget), introduce
sched_numa_hop_mask() to export those cpumasks.
Link: http://lore.kernel.org/r/20220728191203.4055-1-tariqt@nvidia.com
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function finds Nth set CPU in a given cpumask starting from a given
node.
Leveraging the fact that each hop in sched_domains_numa_masks includes the
same or greater number of CPUs than the previous one, we can use binary
search on hops instead of linear walk, which makes the overall complexity
of O(log n) in terms of number of cpumask_weight() calls.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce cpumask_nth_and_andnot() based on find_nth_and_andnot_bit().
It's used in the following patch to traverse cpumasks without storing
intermediate result in temporary cpumask.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the following patches the function is used to implement in-place bitmaps
traversing without storing intermediate result in temporary bitmaps.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case a new string DB is added to the FW, the FW publishes an event
notifying the strings DB have updated.
Add support in driver for handling this event.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Commit 90e7cb78b8 ("net/mlx5: fix missing mutex_unlock in
mlx5_fw_fatal_reporter_err_work()") introduced another checking of
MLX5_DROP_HEALTH_NEW_WORK. At this point, the first check of
MLX5_DROP_HEALTH_NEW_WORK is redundant and so is the lock that
protects it.
Remove the lock and rename MLX5_DROP_HEALTH_NEW_WORK to reflect these
changes.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
We have many places using this expression:
SKB_DATA_ALIGN(sizeof(struct skb_shared_info))
Use of SKB_HEAD_ALIGN() will allow to clean them.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marc Kleine-Budde says:
====================
pull-request: can-next 2023-02-06
this is a pull request of 47 patches for net-next/master.
The first two patch is by Oliver Hartkopp. One adds missing error
checking to the CAN_GW protocol, the other adds a missing CAN address
family check to the CAN ISO TP protocol.
Thomas Kopp contributes a performance optimization to the mcp251xfd
driver.
The next 11 patches are by Geert Uytterhoeven and add support for
R-Car V4H systems to the rcar_canfd driver.
Stephane Grosjean and Lukas Magel contribute 8 patches to the peak_usb
driver, which add support for configurable CAN channel ID.
The last 17 patches are by me and target the CAN bit timing
configuration. The bit timing is cleaned up, error messages are
improved and forwarded to user space via NL_SET_ERR_MSG_FMT() instead
of netdev_err(), and the SJW handling is updated, including the
definition of a new default value that will benefit CAN-FD
controllers, by increasing their oscillator tolerance.
* tag 'linux-can-next-for-6.3-20230206' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (47 commits)
can: bittiming: can_validate_bitrate(): report error via netlink
can: bittiming: can_calc_bittiming(): convert from netdev_err() to NL_SET_ERR_MSG_FMT()
can: bittiming: can_calc_bittiming(): clean up SJW handling
can: bittiming: can_sjw_set_default(): use Phase Seg2 / 2 as default for SJW
can: bittiming: can_sjw_check(): check that SJW is not longer than either Phase Buffer Segment
can: bittiming: can_sjw_check(): report error via netlink and harmonize error value
can: bittiming: can_fixup_bittiming(): report error via netlink and harmonize error value
can: bittiming: factor out can_sjw_set_default() and can_sjw_check()
can: bittiming: can_changelink() pass extack down callstack
can: netlink: can_changelink(): convert from netdev_err() to NL_SET_ERR_MSG_FMT()
can: netlink: can_validate(): validate sample point for CAN and CAN-FD
can: dev: register_candev(): bail out if both fixed bit rates and bit timing constants are provided
can: dev: register_candev(): ensure that bittiming const are valid
can: bittiming: can_get_bittiming(): use direct return and remove unneeded else
can: bittiming: can_fixup_bittiming(): set effective tq
can: bittiming: can_fixup_bittiming(): use CAN_SYNC_SEG instead of 1
can: bittiming(): replace open coded variants of can_bit_time()
can: peak_usb: Reorder include directives alphabetically
can: peak_usb: align CAN channel ID format in log with sysfs attribute
can: peak_usb: export PCAN CAN channel ID as sysfs device attribute
...
====================
Link: https://lore.kernel.org/r/20230206131620.2758724-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Factor out the functionality of assigning a SJW default value into
can_sjw_set_default() and the checking the SJW limits into
can_sjw_check().
This functions will be improved and called from a different function
in the following patches.
Link: https://lore.kernel.org/all/20230202110854.2318594-11-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This is a preparation patch.
In order to pass warning/error messages during netlink calls back to
user space, pass the extack struct down the callstack of
can_changelink(), the actual error messages will be added in the
following ptaches.
Link: https://lore.kernel.org/all/20230202110854.2318594-10-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add sock_init_data_uid() to explicitly initialize the socket uid.
To initialise the socket uid, sock_init_data() assumes a the struct
socket* sock is always embedded in a struct socket_alloc, used to
access the corresponding inode uid. This may not be true.
Examples are sockets created in tun_chr_open() and tap_open().
Fixes: 86741ec254 ("net: core: Add a UID field to struct sock.")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
