PD#SWPL-2551
Problem:
range of mouse is wrong under 4K mode
Solution:
new cursor coordinate paras without using scale
add osd_cursor_hw_no_scale() to deal with it.
Verify:
verified on P212
Change-Id: I1748df569b96522eb58dc00af862983bca17815a
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-1081
Problem:
Need get freed handle for DRM frame mode
Solution:
Add ioctl cmd to get freed handle
Verify:
P212
Change-Id: Ic0ce64061e334fdea5580d9f92b3e0b58caa88eb
Signed-off-by: Tao Guo <tao.guo@amlogic.com>
PD#SWPL-2181
Problem:
For some Rx, if the Tx cold boots up, the HPD can't be got in uboot.
That is to say, the output mode is CVBS in uboot, even HDMI cable is
connected. And during kernel boots up, it will reset to hdmi mode.
During the Android boots up, it will set to hdmi mode again. Twice
hdmi mode setting may cause TV flicks.
Solution:
Add parsing colorattribute from uboot and assign $attr to prevent
the second Android mode setting.
Verify:
S905X/P212
Change-Id: I665227bc3e8481acb40c34dde2f5cb3c633c64a2
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
PD#SWPL-1690
Problem:
YouTube requires support playback rate 0.25, 0.50, 1.00, 1.25, 1.50,
2.00
Solution:
vsync_slow_factor can be used to slow playback, extend it's value to
support fast playback
Verify:
mesongxl_p212_32_kernel49
Change-Id: I94589a210b8531cc198414b3017c3caf82827565
Signed-off-by: Daogao Xu <daogao.xu@amlogic.com>
PD#SWPL-2512
Problem:
isp reserved mem too large
Solution:
reduce isp mem to 256M
Verify:
A311D-W400
Change-Id: I33ee2872daf961da5f0ba4ba4810b0ac9690e45f
Signed-off-by: Jiacheng Mei <jiacheng.mei@amlogic.com>
PD#SWPL-2448
Problem:
can not read dnlp scurv_mid2 value
Solution:
fix the error
Verify:
t962x_r311
Change-Id: I7a7df769dd117fd83164065f6df8e3ae82c2499f
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
PD#SWPL-2348
Problem:
G12B need to support secure upgrade check
Solution:
add defendkey support in all G12B dts
Verify:
G12B skt board verify pass
Change-Id: I2c3f51e761531cf2169dda483991b3d876039686
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
PD#SWPL-3188
Problem:
When HDMI cable is not connected(that is CVBS out), and system
may be panic after resume.
Solution:
Add NULL pointer protection check
Verify:
P212
Change-Id: I60818faaf7049667501e31990fa557b754ea7f1b
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
PD#SWPL-1910
Problem:
Black dot on cvbsout when local play 4k
Solution:
Set limit rang when vpp output yuv for cvbs
Verify:
test pass on u200/s905x
Change-Id: Ia3e93078eb1a00d8c974bae8cc373a3a679f8b9f
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
PD#SWPL-1968
Problem:
some error edid need to be parsed
Solution:
add parsing for non-standard dv edid
Verify:
t962e (txlx)
Change-Id: Ia952ed59650fd0b1c665ca03175a38c1cf3ae5bb
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
PD#SWPL-1600
Problem:
The current watchdog is not the upstream standard driver.
Solution:
Replace watchdog device tree to use the standard watchdog driver.
Verify:
S905X P215/P212 Android-32bit Kernel-32bit.
Change-Id: I972c8ebb0158caa2df393d9a2d687d9298181102
Signed-off-by: Bo Yang <bo.yang@amlogic.com>
watchdog: Change the feed watchdog mode [1/1]
PD#SWPL-2378
Problem:
Using Android to feed watchdog is not easy to debug the
crash problem, in addition, the Android does not open
the dog feeding service.
Solution:
Change the DTS configuration and change into driver feed watchdog.
Verify:
test pass on g12a-u200
Change-Id: Ie0a91fd8451fdccf3038ba6290a277c9048c52cd
Signed-off-by: Yingyuan Zhu <yingyuan.zhu@amlogic.com>
PD#SWPL-2719
Problem:
Can't idetify correctlly when move disk have multi
partition
Solution:
Remove the function of using the partition name as
the device node name
Verify:
test pass on tl1 ref board
Change-Id: I113e63f209c529149fb94b0bb10b0b254717c2bf
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
PD#SWPL-2347
Problem:
G12A need to support secure upgrade check
Solution:
add defendkey support in all G12A dts
Verify:
G12A skt board verify pass
Change-Id: I7343c2c553dfe776eefcfff9ab3a270c87014118
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
PD#SWPL-2347
Problem:
G12A need to support secure upgrade check
Solution:
1.modify reserve memory mode
2.only use cpu0 in defendkey write process
Verify:
G12A skt board verify pass
Change-Id: Iad771381e959a79dcba7a0adb862295fa5ba5dee
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
PD#OTT-937
Problem:
When kill mediacodec during playing drm, tvp memory not be freed
Solution:
Check tvp flag in kernel, free tvp memory if flag is not zero
Verify:
P212
Change-Id: I35cbb2808bf179710ec59bd5227995949946ee77
Signed-off-by: Tao Guo <tao.guo@amlogic.com>
PD#OTT-776
Problem:
dv core 2 get the error hsize and vsize from OSD module
Solution:
when opening 3 osd paths. we get the accurate the parameters again
Verify:
g12b s922
Change-Id: Ib6af084910c8cf1896060295c7cea75971cd86b6
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
PD#SWPL-2960
Problem:
If the overlay dts refers to a node which does not exist in the base
device tree, the final fdt will be in a damaged state after doing fdt
overlay
Solution:
Use the standard overlay dts syntax to note node to be applied instead
of the google recommended one
Verify:
Locally on P230
Change-Id: Ibf45abff1348437bc3fc2745e6d955cc8292db46
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
PD#SWPL-2193
Problem:
Node dummy-battery and dummy-charger are android version
dependent, and should be "fdt overlayed"
Solution:
Add fdt overlay file android_p_overlay_dt.dts, and configure
dummy-battery and dummy-charger in it
Verify:
Locally on P212 and R311
Change-Id: I75a27a0ad1253556cae5273f36e0eb828291fd73
Signed-off-by: Jianxiong Pan <jianxiong.pan@amlogic.com>
Signed-off-by: jiamin ma <jiamin.ma@amlogic.com>
PD#SWPL-2193
Problem:
We cannot compile dtbo file in a way like
make ARCH=arm foo.dtbo
Solution:
Add dtbo target and reuse the dtb rules
Verify:
Locally verifed
Change-Id: I34b88e61b409defe553cf5ed1077c160b9a6f350
Signed-off-by: jiamin ma <jiamin.ma@amlogic.com>
PD#SWPL-2193
This adds the following commits from upstream:
b1a60033c110 tests: Add a test for overlays syntactic sugar
737b2df39cc8 overlay: Add syntactic sugar version of overlays
497432fd2131 checks: Use proper format modifier for size_t
22a65c5331c2 dtc: Bump version to v1.4.5
c575d8059fff Add fdtoverlay to .gitignore
b6a6f9490d19 fdtoverlay: Sanity check blob size
8c1eb1526d2d pylibfdt: Use Python2 explicitly
ee3d26f6960b checks: add interrupts property check
c1e7738988f5 checks: add gpio binding properties check
b3bbac02d5e3 checks: add phandle with arg property checks
fe50bd1ecc1d fdtget: Split out cell list display into a new function
62d812308d11 README: Add a note about test_tree1.dts
5bed86aee9e8 pylibfdt: Add support for fdt_subnode_offset()
46f31b65b3b3 pylibfdt: Add support for fdt_node_offset_by_phandle()
a3ae43723687 pylibfdt: Add support for fdt_parent_offset()
a198af80344c pylibfdt: Add support for fdt_get_phandle()
b9eba92ea50f tests: Return a failure code when any tests fail
155faf6cc209 pylibfdt: Use local pylibfdt module
50e5cd07f325 pylibfdt: Add a test for use of uint32_t
ab78860f09f5 pylibfdt: Add stdint include to fix uint32_t
36f511fb1113 tests: Add stacked overlay tests on fdtoverlay
1bb00655d3e5 fdt: Allow stacked overlays phandle references
a33c2247ac8d Introduce fdt_setprop_placeholder() method
0016f8c2aa32 dtc: change default phandles to ePAPR style instead of both
e3b9a9588a35 tests: fdtoverlay unit test
42409146f2db fdtoverlay: A tool that applies overlays
aae22722fc8d manual: Document missing options
13ce6e1c2fc4 dtc: fix sprintf() format string error, again
d990b8013889 Makefile: Fix build on MSYS2 and Cygwin
51f56dedf8ea Clean up shared library compile/link options
21a2bc896e3d Suppress expected error message in fdtdump test
2a42b14d0d03 dtc: check.c fix compile error
a10cb3c818d3 Fix get_node_by_path string equality check
548aea2c436a fdtdump: Discourage use of fdtdump
c2258841a785 fdtdump: Fix over-zealous version check
9067ee4be0e6 Fix a few whitespace and style nits
e56f2b07be38 pylibfdt: Use setup.py to build the swig file
896f1c133265 pylibfdt: Use Makefile constructs to implement NO_PYTHON
90db6d9989ca pylibfdt: Allow setup.py to operate stand-alone
e20d9658cd8f Add Coverity Scan support
b04a2cf08862 pylibfdt: Fix code style in setup.py
1c5170d3a466 pylibfdt: Rename libfdt.swig to libfdt.i
580a9f6c2880 Add a libfdt function to write a property placeholder
ab15256d8d02 pylibfdt: Use the call function to simplify the Makefile
9f2e3a3a1f19 pylibfdt: Use the correct libfdt version in the module
e91c652af215 pylibfdt: Enable installation of Python module
8a892fd85d94 pylibfdt: Allow building to be disabled
741cdff85d3e .travis.yml: Add builds with and without Python library prerequisites
14c4171f4f9a pylibfdt: Use package_dir to set the package directory
89a5062ab231 pylibfdt: Use environment to pass C flags and files
4e0e0d049757 pylibfdt: Allow pkg-config to be supplied in the environment
6afd7d9688f5 Correct typo: s/pylibgfdt/pylibfdt/
Change-Id: Ib23ca90f1e34ed85db3aae9d223fc921e6f2114e
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: jiamin ma <jiamin.ma@amlogic.com>
PD#OTT-778
Problem:
1.kernel received reboot command, but hang in shutdown
Solution:
move tasklet_disable behind tasklet_kill
Verify:
P321
Change-Id: I994c21c5aeb42dbbb4e3b50ccac8376db4d4039d
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Conflicts:
drivers/amlogic/media/deinterlace/deinterlace.c
PD#SWPL-2600
Problem:
osd display half menu when in 1080i
Solution:
osd: adjust free_scale_dst if interlaced
Verify:
verify by p212
Change-Id: Ie9faffbb5942faa317b380ca0cdbee072a30c01f
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#SWPL-2580
Problem:
The vd1 postblend bit in vpp misc is overwriten.
Solution:
add more check for vd1 postblend bit in vsync
Verify:
verify by p212
Change-Id: I367e920c13764af41446d7d759aaf8388fb08722
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#SWPL-2580
Problem:
The vd1 postblend bit in vpp misc is overwriten.
Solution:
osd: call osd_update_enable if needed
Verify:
verify by p212
Change-Id: I438848dc843ea370d65dc3c6b4befb32d1f2b5f8
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
PD#SWPL-2558
Problem:
a black horizontal line below the screen when play video
Solution:
set dummy data alpha
Verify:
verified on p321
Change-Id: I36dc924b9bc89f4f8ea61eb86c6f5bc9199e40ae
Signed-off-by: Jian Cao <jian.cao@amlogic.com>
PD#172587
Problem:
afbc now support on chip txlx and g12a,
but we use cpu_after_eq(G12A) to judge
if afbc is support or not.
Solution:
use is_meson_g12a_cpu() replace cpu_after_eq(G12A).
Verify:
u200(g12a),t962x_r311
Change-Id: I3fb7ed54f7137fada97481177e40a2543cf8df9f
Signed-off-by: huaihao guo <huaihao.guo@amlogic.com>
PD#SWPL-714
Problem:
The last few seconds of the DD+ stream are not smooth by DTV playback.
Solution:
check the apts and vpts both discontinue,then replay the stream.
Verify:
P321
Change-Id: I6cbbdecc052dfe9fef76b44f36545b231332ee12
Signed-off-by: Yinming Ding <yinming.ding@amlogic.com>
PD#SWPL-2565
Problem:
The splash screen problem for first frame after starting up.
Solution:
Modify the value of register afbc_gclk_ctrl.
Verify:
u211
Change-Id: Ie1ddfade0566ff8cd571c43ba8490a8c277a8758
Signed-off-by: Peng Yixin <yixin.peng@amlogic.com>
PD#SWPL-1207
Problem:
fix the filckered problem when playing transition
video in sdr tv
Solution:
when dv core2 don't run, the reset can't be executed
Verify:
r321
Change-Id: I719325f1722589e02a40d46442258b0d1e3feb17
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
PD#SWPL-2302
Problem:
Play online video,half an hour later, the TV shows
a pink screen and the sound is normal.
Solution:
Check hdcp1.4 status and disable encryption when fail.
Verify:
S922X
Change-Id: I6ce51824726b267d140750f9e9d80aa8bb921cac
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>
PD#172587
Problem:
the line check always return low.
the print of check too much.
Solution:
modify the cec gpio from 7 to 10.
modify the check line.
Verify:
tl1 x301 board
Change-Id: I09ae5eee455d83e51e65957cd293e07da1c0046a
Signed-off-by: hongmin hua <hongmin.hua@amlogic.com>
PD#SWPL-2539
Problem:
defendkey_reserved have influenced on display
during the system boot up
Solution:
adjust defendkey_reserved node location
Verify:
GXL/TXL skt board verify pass
Change-Id: I5cf0245f9653e20224c4e3bab1f6f05527011210
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
