This reverts commit 0be0ee7181.
I was hoping it would be benign to switch over entirely to FMODE_STREAM,
and we'd have just a couple of small fixups we'd need, but it looks like
we're not quite there yet.
While it worked fine on both my desktop and laptop, they are fairly
similar in other respects, and run mostly the same loads. Kenneth
Crudup reports that it seems to break both his vmware installation and
the KDE upower service. In both cases apparently leading to timeouts
due to waitinmg for the f_pos lock.
There are a number of character devices in particular that definitely
want stream-like behavior, but that currently don't get marked as
streams, and as a result get the exclusion between concurrent
read()/write() on the same file descriptor. Which doesn't work well for
them.
The most obvious example if this is /dev/console and /dev/tty, which use
console_fops and tty_fops respectively (and ptmx_fops for the pty master
side). It may be that it's just this that causes problems, but we
clearly weren't ready yet.
Because there's a number of other likely common cases that don't have
llseek implementations and would seem to act as stream devices:
/dev/fuse (fuse_dev_operations)
/dev/mcelog (mce_chrdev_ops)
/dev/mei0 (mei_fops)
/dev/net/tun (tun_fops)
/dev/nvme0 (nvme_dev_fops)
/dev/tpm0 (tpm_fops)
/proc/self/ns/mnt (ns_file_operations)
/dev/snd/pcm* (snd_pcm_f_ops[])
and while some of these could be trivially automatically detected by the
vfs layer when the character device is opened by just noticing that they
have no read or write operations either, it often isn't that obvious.
Some character devices most definitely do use the file position, even if
they don't allow seeking: the firmware update code, for example, uses
simple_read_from_buffer() that does use f_pos, but doesn't allow seeking
back and forth.
We'll revisit this when there's a better way to detect the problem and
fix it (possibly with a coccinelle script to do more of the FMODE_STREAM
annotations).
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Cc: Kirill Smelkov <kirr@nexedi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A bunch of irrelevant headers is included into coprocessor.S. Remove
them and add necessary asm/regs.h.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
KASAN shadow map doesn't need to be accessible through the linear kernel
mapping, allocate its pages with MEMBLOCK_ALLOC_ANYWHERE so that high
memory can be used. This frees up to ~100MB of low memory on xtensa
configurations with KASAN and high memory.
Cc: stable@vger.kernel.org # v5.1+
Fixes: f240ec09bb ("memblock: replace memblock_alloc_base(ANYWHERE) with memblock_phys_alloc")
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Virtual and translated addresses retrieved by the xtensa TLB sanity
checker must be consistent, i.e. correspond to the same state of the
checked TLB entry. KASAN shadow memory is mapped dynamically using
auto-refill TLB entries and thus may change TLB state between the
virtual and translated address retrieval, resulting in false TLB
insanity report.
Move read_xtlb_translation close to read_xtlb_virtual to make sure that
read values are consistent.
Cc: stable@vger.kernel.org
Fixes: a99e07ee5e ("xtensa: check TLB sanity on return to userspace")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
xtensa has 2-level page tables and already uses pgtable-nopmd for page
table folding.
Add walks of p4d level where appropriate and drop usage of
__ARCH_USE_5LEVEL_HACK.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Message-Id: <1572964400-16542-3-git-send-email-rppt@kernel.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> [fix up
arch/xtensa/include/asm/fixmap.h and
arch/xtensa/mm/tlb.c]
There was a definition of pmd_offset() in arch/xtensa/include/asm/pgtable.h
that shadowed the generic implementation defined in
include/asm-generic/pgtable-nopmd.h.
As the result, xtensa had shortcuts in page table traversal in several
places instead of doing level unfolding.
Remove local override for pmd_offset() and add page table unfolding where
necessary.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Message-Id: <1572964400-16542-2-git-send-email-rppt@kernel.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Introduce Kconfig symbol PRINT_STACK_DEPTH and use it to initialize
kstack_depth_to_print.
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Calculate printable stack size and use print_hex_dump instead of
opencoding it.
Drop extra newline output in show_trace as its output format does not
depend on CONFIG_KALLSYMS.
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Use "m" constraint instead of "r" for the address, as "m" allows
compiler to access adjacent locations using base + offset, while "r"
requires updating the base register every time.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Use "m" constraint instead of "r" for the address, as "m" allows
compiler to access adjacent locations using base + offset, while "r"
requires updating the base register every time.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Numeric assembly arguments are hard to understand and assembly code that
uses them is hard to modify. Use named arguments in __cmpxchg_u32 and
xchg_u32.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Use "m" constraint instead of "r" for the address, as "m" allows
compiler to access adjacent locations using base + offset, while "r"
requires updating the base register every time.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Numeric assembly arguments are hard to understand and assembly code that
uses them is hard to modify. Use named arguments in ATOMIC_OP,
ATOMIC_OP_RETURN and ATOMIC_FETCH_OP macros.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Use "m" constraint instead of "r" for the address, as "m" allows
compiler to access adjacent locations using base + offset, while "r"
requires updating the base register every time.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Numeric assembly arguments are hard to understand and assembly code that
uses them is hard to modify. Use named arguments in BIT_OP and
TEST_AND_BIT_OP macros.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Parameterize macros with function name, opcode and inversion pattern.
This reduces code duplication removing 2/3 of definitions.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Use "m" constraint instead of "r" for the address, as "m" allows
compiler to access adjacent locations using base + offset, while "r"
requires updating the base register every time.
Use %[mem] * 0 + v to replace offset part of %[mem] expansion with v.
It is impossible to change address alignment through the offset part on
xtensa, so just ignore offset in alignment checks.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
XIP (eXecute In Place) kernel image is the image that can be run
directly from ROM, using RAM only for writable data.
XIP xtensa kernel differs from regular xtensa kernel in the following
ways:
- it has exception/IRQ vectors merged into text section. No vectors
relocation takes place at kernel startup.
- .data/.bss location must be specified in the kernel configuration,
its content is copied there in the _startup function.
- .init.text is merged with the rest of text and is executed from ROM.
- when MMU is used the virtual address where the kernel will be mapped
must be specified in the kernel configuration. It may be in the KSEG
or in the KIO, __pa macro is adjusted to be able to handle both.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
In attach_node_and_children memory is allocated for full_name via
kasprintf. If the condition of the 1st if is not met the function
returns early without freeing the memory. Add a kfree() to fix that.
This has been detected with kmemleak:
Link: https://bugzilla.kernel.org/show_bug.cgi?id=205327
It looks like the leak was introduced by this commit:
Fixes: 5babefb7f7 ("of: unittest: allow base devicetree to have symbol metadata")
Signed-off-by: Erhard Furtner <erhard_f@mailbox.org>
Reviewed-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
No changeset entries are created for #address-cells and #size-cells
properties, but the duplicated properties are never freed. This
results in a memory leak which is detected by kmemleak:
unreferenced object 0x85887180 (size 64):
backtrace:
kmem_cache_alloc_trace+0x1fb/0x1fc
__of_prop_dup+0x25/0x7c
add_changeset_property+0x17f/0x370
build_changeset_next_level+0x29/0x20c
of_overlay_fdt_apply+0x32b/0x6b4
...
Fixes: 6f75118800 ("of: overlay: validate overlay properties #address-cells and #size-cells")
Reported-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Tested-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Add missing 'type: object' schema to interrupt-partition-* nodes. Found
with fix to meta-schema checks.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
The minItems/maxItems default to the number of items in an 'items' list,
so drop the redundant specifying of them here.
Signed-off-by: Rob Herring <robh@kernel.org>
With split of power domain controller bindings to power-domain.yaml,
the consumer part was renamed to power-domain.txt breaking the
references. Undo the renaming.
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: 5279a3d8be ("dt-bindings: power: Convert Generic Power Domain bindings to json-schema")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Pull x86 iopl updates from Ingo Molnar:
"This implements a nice simplification of the iopl and ioperm code that
Thomas Gleixner discovered: we can implement the IO privilege features
of the iopl system call by using the IO permission bitmap in
permissive mode, while trapping CLI/STI/POPF/PUSHF uses in user-space
if they change the interrupt flag.
This implements that feature, with testing facilities and related
cleanups"
[ "Simplification" may be an over-statement. The main goal is to avoid
the cli/sti of iopl by effectively implementing the IO port access
parts of iopl in terms of ioperm.
This may end up not workign well in case people actually depend on
cli/sti being available, or if there are mixed uses of iopl and
ioperm. We will see.. - Linus ]
* 'x86-iopl-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
x86/ioperm: Fix use of deprecated config option
x86/entry/32: Clarify register saving in __switch_to_asm()
selftests/x86/iopl: Extend test to cover IOPL emulation
x86/ioperm: Extend IOPL config to control ioperm() as well
x86/iopl: Remove legacy IOPL option
x86/iopl: Restrict iopl() permission scope
x86/iopl: Fixup misleading comment
selftests/x86/ioperm: Extend testing so the shared bitmap is exercised
x86/ioperm: Share I/O bitmap if identical
x86/ioperm: Remove bitmap if all permissions dropped
x86/ioperm: Move TSS bitmap update to exit to user work
x86/ioperm: Add bitmap sequence number
x86/ioperm: Move iobitmap data into a struct
x86/tss: Move I/O bitmap data into a seperate struct
x86/io: Speedup schedule out of I/O bitmap user
x86/ioperm: Avoid bitmap allocation if no permissions are set
x86/ioperm: Simplify first ioperm() invocation logic
x86/iopl: Cleanup include maze
x86/tss: Fix and move VMX BUILD_BUG_ON()
x86/cpu: Unify cpu_init()
...
When a driver enables MSI-X, msix_program_entries() reads the MSI-X Vector
Control register for each vector and saves it in desc->masked. Each
register is 32 bits and bit 0 is the actual Mask bit.
When we restored these registers during resume, we previously set the Mask
bit if *any* bit in desc->masked was set instead of when the Mask bit
itself was set:
pci_restore_state
pci_restore_msi_state
__pci_restore_msix_state
for_each_pci_msi_entry
msix_mask_irq(entry, entry->masked) <-- entire u32 word
__pci_msix_desc_mask_irq(desc, flag)
mask_bits = desc->masked & ~PCI_MSIX_ENTRY_CTRL_MASKBIT
if (flag) <-- testing entire u32, not just bit 0
mask_bits |= PCI_MSIX_ENTRY_CTRL_MASKBIT
writel(mask_bits, desc_addr + PCI_MSIX_ENTRY_VECTOR_CTRL)
This means that after resume, MSI-X vectors were masked when they shouldn't
be, which leads to timeouts like this:
nvme nvme0: I/O 978 QID 3 timeout, completion polled
On resume, set the Mask bit only when the saved Mask bit from suspend was
set.
This should remove the need for 19ea025e1d ("nvme: Add quirk for Kingston
NVME SSD running FW E8FK11.T").
[bhelgaas: commit log, move fix to __pci_msix_desc_mask_irq()]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=204887
Link: https://lore.kernel.org/r/20191008034238.2503-1-jian-hong@endlessm.com
Fixes: f2440d9acb ("PCI MSI: Refactor interrupt masking code")
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
27e20603c5 ("PCI/MSI: Move D0 check into pci_msi_check_device()")
moved the power state check into pci_msi_check_device(), which was
subsequently renamed to pci_msi_supported(). This didn't change the
behavior, since both callers checked the power state.
However, it doesn't fit the current "pci_msi_supported()" name, which
should return what the device is capable of, independent of the power
state.
Move the power state check back into the callers for readability. No
functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull x86 asm updates from Ingo Molnar:
"The main changes in this cycle were:
- Cross-arch changes to move the linker sections for NOTES and
EXCEPTION_TABLE into the RO_DATA area, where they belong on most
architectures. (Kees Cook)
- Switch the x86 linker fill byte from x90 (NOP) to 0xcc (INT3), to
trap jumps into the middle of those padding areas instead of
sliding execution. (Kees Cook)
- A thorough cleanup of symbol definitions within x86 assembler code.
The rather randomly named macros got streamlined around a
(hopefully) straightforward naming scheme:
SYM_START(name, linkage, align...)
SYM_END(name, sym_type)
SYM_FUNC_START(name)
SYM_FUNC_END(name)
SYM_CODE_START(name)
SYM_CODE_END(name)
SYM_DATA_START(name)
SYM_DATA_END(name)
etc - with about three times of these basic primitives with some
label, local symbol or attribute variant, expressed via postfixes.
No change in functionality intended. (Jiri Slaby)
- Misc other changes, cleanups and smaller fixes"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (67 commits)
x86/entry/64: Remove pointless jump in paranoid_exit
x86/entry/32: Remove unused resume_userspace label
x86/build/vdso: Remove meaningless CFLAGS_REMOVE_*.o
m68k: Convert missed RODATA to RO_DATA
x86/vmlinux: Use INT3 instead of NOP for linker fill bytes
x86/mm: Report actual image regions in /proc/iomem
x86/mm: Report which part of kernel image is freed
x86/mm: Remove redundant address-of operators on addresses
xtensa: Move EXCEPTION_TABLE to RO_DATA segment
powerpc: Move EXCEPTION_TABLE to RO_DATA segment
parisc: Move EXCEPTION_TABLE to RO_DATA segment
microblaze: Move EXCEPTION_TABLE to RO_DATA segment
ia64: Move EXCEPTION_TABLE to RO_DATA segment
h8300: Move EXCEPTION_TABLE to RO_DATA segment
c6x: Move EXCEPTION_TABLE to RO_DATA segment
arm64: Move EXCEPTION_TABLE to RO_DATA segment
alpha: Move EXCEPTION_TABLE to RO_DATA segment
x86/vmlinux: Move EXCEPTION_TABLE to RO_DATA segment
x86/vmlinux: Actually use _etext for the end of the text segment
vmlinux.lds.h: Allow EXCEPTION_TABLE to live in RO_DATA
...
Pull x86 fixes from Ingo Molnar:
"These are the fixes left over from the v5.4 cycle:
- Various low level 32-bit entry code fixes and improvements by Andy
Lutomirski, Peter Zijlstra and Thomas Gleixner.
- Fix 32-bit Xen PV breakage, by Jan Beulich"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/32: Fix FIXUP_ESPFIX_STACK with user CR3
x86/pti/32: Calculate the various PTI cpu_entry_area sizes correctly, make the CPU_ENTRY_AREA_PAGES assert precise
selftests/x86/sigreturn/32: Invalidate DS and ES when abusing the kernel
selftests/x86/mov_ss_trap: Fix the SYSENTER test
x86/entry/32: Fix NMI vs ESPFIX
x86/entry/32: Unwind the ESPFIX stack earlier on exception entry
x86/entry/32: Move FIXUP_FRAME after pushing %fs in SAVE_ALL
x86/entry/32: Use %ss segment where required
x86/entry/32: Fix IRET exception
x86/cpu_entry_area: Add guard page for entry stack on 32bit
x86/pti/32: Size initial_page_table correctly
x86/doublefault/32: Fix stack canaries in the double fault handler
x86/xen/32: Simplify ring check in xen_iret_crit_fixup()
x86/xen/32: Make xen_iret_crit_fixup() independent of frame layout
x86/stackframe/32: Repair 32-bit Xen PV
Pull x86 PTI updates from Ingo Molnar:
"Fix reporting bugs of the MDS and TAA mitigation status, if one or
both are set via a boot option.
No change to mitigation behavior intended"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation: Fix redundant MDS mitigation message
x86/speculation: Fix incorrect MDS/TAA mitigation status
In commit 4f07b80c97 ("tipc: check msg->req data len in
tipc_nl_compat_bearer_disable") the same patch code was copied into
routines: tipc_nl_compat_bearer_disable(),
tipc_nl_compat_link_stat_dump() and tipc_nl_compat_link_reset_stats().
The two link routine occurrences should have been modified to check
the maximum link name length and not bearer name length.
Fixes: 4f07b80c97 ("tipc: check msg->reg data len in tipc_nl_compat_bearer_disable")
Signed-off-by: John Rutherford <john.rutherford@dektech.com.au>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If an error occurs on one of the ios used for creating an
association, the creating routine has error paths that are
invoked by the command failure and the error paths will free
up the controller resources created to that point.
But... the io was ultimately determined by an asynchronous
completion routine that detected the error and which
unconditionally invokes the error_recovery path which calls
delete_association. Delete association deletes all outstanding
io then tears down the controller resources. So the
create_association thread can be running in parallel with
the error_recovery thread. What was seen was the LLDD received
a call to delete a queue, causing the LLDD to do a free of a
resource, then the transport called the delete queue again
causing the driver to repeat the free call. The second free
routine corrupted the allocator. The transport shouldn't be
making the duplicate call, and the delete queue is just one
of the resources being freed.
To fix, it is realized that the create_association path is
completely serialized with one command at a time. So the
failed io completion will always be seen by the create_association
path and as of the failure, there are no ios to terminate and there
is no reason to be manipulating queue freeze states, etc.
The serialized condition stays true until the controller is
transitioned to the LIVE state. Thus the fix is to change the
error recovery path to check the controller state and only
invoke the teardown path if not already in the CONNECTING state.
Reviewed-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Pull x86 platform updates from Ingo Molnar:
"UV platform updates (with a 'hubless' variant) and Jailhouse updates
for better UART support"
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/jailhouse: Only enable platform UARTs if available
x86/jailhouse: Improve setup data version comparison
x86/platform/uv: Account for UV Hubless in is_uvX_hub Ops
x86/platform/uv: Check EFI Boot to set reboot type
x86/platform/uv: Decode UVsystab Info
x86/platform/uv: Add UV Hubbed/Hubless Proc FS Files
x86/platform/uv: Setup UV functions for Hubless UV Systems
x86/platform/uv: Add return code to UV BIOS Init function
x86/platform/uv: Return UV Hubless System Type
x86/platform/uv: Save OEM_ID from ACPI MADT probe
Pull x86 mm updates from Ingo Molnar:
"The main changes in this cycle were:
- A PAT series from Davidlohr Bueso, which simplifies the memtype
rbtree by using the interval tree helpers. (There's more cleanups
in this area queued up, but they didn't make the merge window.)
- Also flip over CONFIG_X86_5LEVEL to default-y. This might draw in a
few more testers, as all the major distros are going to have
5-level paging enabled by default in their next iterations.
- Misc cleanups"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/pat: Rename pat_rbtree.c to pat_interval.c
x86/mm/pat: Drop the rbt_ prefix from external memtype calls
x86/mm/pat: Do not pass 'rb_root' down the memtype tree helper functions
x86/mm/pat: Convert the PAT tree to a generic interval tree
x86/mm: Clean up the pmd_read_atomic() comments
x86/mm: Fix function name typo in pmd_read_atomic() comment
x86/cpu: Clean up intel_tlb_table[]
x86/mm: Enable 5-level paging support by default
We've seen a few devices that return different controller id's to
the Fabric Connect command vs the Identify(controller) command. It's
currently hard to identify this failure by existing error messages. It
comes across as a (re)connect attempt in the transport that fails with
a -22 (-EINVAL) status. The issue is compounded by older kernels not
having the controller id check or had the identify command overwrite the
fabrics controller id value before it checked. Both resulted in cases
where the devices appeared fine until more recent kernels.
Clarify the reject by adding an error message on controller id mismatches.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
In nvme-fc: it's possible to have connected active controllers
and as no references are taken on the LLDD, the LLDD can be
unloaded. The controller would enter a reconnect state and as
long as the LLDD resumed within the reconnect timeout, the
controller would resume. But if a namespace on the controller
is the root device, allowing the driver to unload can be problematic.
To reload the driver, it may require new io to the boot device,
and as it's no longer connected we get into a catch-22 that
eventually fails, and the system locks up.
Fix this issue by taking a module reference for every connected
controller (which is what the core layer did to the transport
module). Reference is cleared when the controller is removed.
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Pull x86 kdump updates from Ingo Molnar:
"This solves a kdump artifact where encrypted memory contents are
dumped, instead of unencrypted ones.
The solution also happens to simplify the kdump code, to everyone's
delight"
* 'x86-kdump-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/crash: Align function arguments on opening braces
x86/kdump: Remove the backup region handling
x86/kdump: Always reserve the low 1M when the crashkernel option is specified
x86/crash: Add a forward declaration of struct kimage
Pull x86 hyperv updates from Ingo Molnar:
"Misc updates to the hyperv guest code:
- Rework clockevents initialization to better support hibernation
- Allow guests to enable InvariantTSC
- Micro-optimize send_ipi_one"
* 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/hyperv: Initialize clockevents earlier in CPU onlining
x86/hyperv: Allow guests to enable InvariantTSC
x86/hyperv: Micro-optimize send_ipi_one()
The 'start' variable indicates the start of a filemap and is set to the
iocb's position, which we have already cached as 'pos', upon function
entry.
'pos' is used as a cursor indicating the current position and updated
later in iomap_dio_rw(), but not before the last use of 'start'.
Remove 'start' as it's synonym for 'pos' before we're entering the loop
calling iomapp_apply().
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
