Fixes the following warnings when the driver is built with sparse
checks enabled:
main.c:767:47: warning: restricted __le32 degrades to integer
main.c:775:47: warning: restricted __le16 degrades to integer
main.c:776:44: warning: restricted __le16 degrades to integer
main.c:876:40: warning: incorrect type in assignment (different base types)
main.c:876:40: expected restricted __le32 [usertype] frame_size
main.c:876:40: got unsigned int [assigned] [usertype] frame_size
main.c:877:41: warning: incorrect type in assignment (different base types)
main.c:877:41: expected restricted __le32 [usertype] frame_count
main.c:877:41: got unsigned int [usertype]
main.c:878:41: warning: incorrect type in assignment (different base types)
main.c:878:41: expected restricted __le16 [usertype] frame_index
main.c:878:41: got unsigned short [usertype]
main.c:879:38: warning: incorrect type in assignment (different base types)
main.c:879:38: expected restricted __le16 [usertype] frame_id
main.c:879:38: got unsigned short [usertype]
main.c:880:62: warning: restricted __le32 degrades to integer
main.c:880:35: warning: restricted __le16 degrades to integer
No functional changes intended.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The commits referenced below allows userspace to use the NLM_F_ECHO flag
for RTM_NEW/DELLINK operations to receive unicast notifications for the
affected link. Prior to these changes, applications may have relied on
multicast notifications to learn the same information without specifying
the NLM_F_ECHO flag.
For such applications, the mentioned commits changed the behavior for
requests not using NLM_F_ECHO. Multicast notifications are still received,
but now use the portid of the requester and the sequence number of the
request instead of zero values used previously. For the application, this
message may be unexpected and likely handled as a response to the
NLM_F_ACKed request, especially if it uses the same socket to handle
requests and notifications.
To fix existing applications relying on the old notification behavior,
set the portid and sequence number in the notification only if the
request included the NLM_F_ECHO flag. This restores the old behavior
for applications not using it, but allows unicasted notifications for
others.
Fixes: f3a63cce1b ("rtnetlink: Honour NLM_F_ECHO flag in rtnl_delete_link")
Fixes: d88e136cab ("rtnetlink: Honour NLM_F_ECHO flag in rtnl_newlink_create")
Signed-off-by: Martin Willi <martin@strongswan.org>
Acked-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20230411074319.24133-1-martin@strongswan.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A number of MDIO drivers make use of devm_mdiobus_alloc_size(). This
is only available when CONFIG_MDIO_DEVRES is enabled. Add missing
depends or selects, depending on if there are circular dependencies or
not. This avoids linker errors, especially for randconfig builds.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230409150204.2346231-1-andrew@lunn.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are several issues with copy_from_user_nofault():
- access_ok() is designed for user context only and for that reason
it has WARN_ON_IN_IRQ() which triggers when bpf, kprobe, eprobe
and perf on ppc are calling it from irq.
- it's missing nmi_uaccess_okay() which is a nop on all architectures
except x86 where it's required.
The comment in arch/x86/mm/tlb.c explains the details why it's necessary.
Calling copy_from_user_nofault() from bpf, [ke]probe without this check is not safe.
- __copy_from_user_inatomic() under CONFIG_HARDENED_USERCOPY is calling
check_object_size()->__check_object_size()->check_heap_object()->find_vmap_area()->spin_lock()
which is not safe to do from bpf, [ke]probe and perf due to potential deadlock.
Fix all three issues. At the end the copy_from_user_nofault() becomes
equivalent to copy_from_user_nmi() from safety point of view with
a difference in the return value.
Reported-by: Hsin-Wei Hung <hsinweih@uci.edu>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Florian Lehner <dev@der-flo.net>
Tested-by: Hsin-Wei Hung <hsinweih@uci.edu>
Tested-by: Florian Lehner <dev@der-flo.net>
Link: https://lore.kernel.org/r/20230410174345.4376-2-dev@der-flo.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull dmaengine fixes from Vinod Koul:
"A couple of fixes in apple driver, core and kernedoc fix for dmaengine
subsystem:
- apple admac driver fixes for current_tx, src_addr_widths and
global' interrupt flags handling
- xdma kerneldoc fix
- core fix for use of devm_add_action_or_reset"
* tag 'dmaengine-fix-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: apple-admac: Fix 'current_tx' not getting freed
dmaengine: apple-admac: Set src_addr_widths capability
dmaengine: apple-admac: Handle 'global' interrupt flags
dmaengine: xilinx: xdma: Fix some kernel-doc comments
dmaengine: Actually use devm_add_action_or_reset()
Christian Ehrig says:
====================
This patch set adds support for using FOU or GUE encapsulation with
an ipip device operating in collect-metadata mode and a set of kfuncs
for controlling encap parameters exposed to a BPF tc-hook.
BPF tc-hooks allow us to read tunnel metadata (like remote IP addresses)
in the ingress path of an externally controlled tunnel interface via
the bpf_skb_get_tunnel_{key,opt} bpf-helpers. Packets can then be
redirected to the same or a different externally controlled tunnel
interface by overwriting metadata via the bpf_skb_set_tunnel_{key,opt}
helpers and a call to bpf_redirect. This enables us to redirect packets
between tunnel interfaces - and potentially change the encapsulation
type - using only a single BPF program.
Today this approach works fine for a couple of tunnel combinations.
For example: redirecting packets between Geneve and GRE interfaces or
GRE and plain ipip interfaces. However, redirecting using FOU or GUE is
not supported today. The ip_tunnel module does not allow us to egress
packets using additional UDP encapsulation from an ipip device in
collect-metadata mode.
Patch 1 lifts this restriction by adding a struct ip_tunnel_encap to
the tunnel metadata. It can be filled by a new BPF kfunc introduced
in Patch 2 and evaluated by the ip_tunnel egress path. This will allow
us to use FOU and GUE encap with externally controlled ipip devices.
Patch 2 introduces two new BPF kfuncs: bpf_skb_{set,get}_fou_encap.
These helpers can be used to set and get UDP encap parameters from the
BPF tc-hook doing the packet redirect.
Patch 3 adds BPF tunnel selftests using the two kfuncs.
---
v3:
- Integrate selftest into test_progs (Alexei)
v2:
- Fixes for checkpatch.pl
- Fixes for kernel test robot
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add two new kfuncs that allow a BPF tc-hook, installed on an ipip
device in collect-metadata mode, to control FOU encap parameters on a
per-packet level. The set of kfuncs is registered with the fou module.
The bpf_skb_set_fou_encap kfunc is supposed to be used in tandem and after
a successful call to the bpf_skb_set_tunnel_key bpf-helper. UDP source and
destination ports can be controlled by passing a struct bpf_fou_encap. A
source port of zero will auto-assign a source port. enum bpf_fou_encap_type
is used to specify if the egress path should FOU or GUE encap the packet.
On the ingress path bpf_skb_get_fou_encap can be used to read UDP source
and destination ports from the receiver's point of view and allows for
packet multiplexing across different destination ports within a single
BPF program and ipip device.
Signed-off-by: Christian Ehrig <cehrig@cloudflare.com>
Link: https://lore.kernel.org/r/e17c94a646b63e78ce0dbf3f04b2c33dc948a32d.1680874078.git.cehrig@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Today ipip devices in collect-metadata mode don't allow for sending FOU
or GUE encapsulated packets. This patch lifts the restriction by adding
a struct ip_tunnel_encap to the tunnel metadata.
On the egress path, the members of this struct can be set by the
bpf_skb_set_fou_encap kfunc via a BPF tc-hook. Instead of dropping packets
wishing to use additional UDP encapsulation, ip_md_tunnel_xmit now
evaluates the contents of this struct and adds the corresponding FOU or
GUE header. Furthermore, it is making sure that additional header bytes
are taken into account for PMTU discovery.
On the ingress path, an ipip device in collect-metadata mode will fill this
struct and a BPF tc-hook can obtain the information via a call to the
bpf_skb_get_fou_encap kfunc.
The minor change to ip_tunnel_encap, which now takes a pointer to
struct ip_tunnel_encap instead of struct ip_tunnel, allows us to control
FOU encap type and parameters on a per packet-level.
Signed-off-by: Christian Ehrig <cehrig@cloudflare.com>
Link: https://lore.kernel.org/r/cfea47de655d0f870248abf725932f851b53960a.1680874078.git.cehrig@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The bpf_cgroup_kptr_get() kfunc has been removed, and
bpf_cgroup_acquire() / bpf_cgroup_release() now have the same semantics
as bpf_task_acquire() / bpf_task_release(). This patch updates the BPF
documentation to reflect this.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230411041633.179404-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that bpf_cgroup_acquire() is KF_RCU | KF_RET_NULL,
bpf_cgroup_kptr_get() is redundant. Let's remove it, and update
selftests to instead use bpf_cgroup_acquire() where appropriate. The
next patch will update the BPF documentation to not mention
bpf_cgroup_kptr_get().
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230411041633.179404-2-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
struct cgroup is already an RCU-safe type in the verifier. We can
therefore update bpf_cgroup_acquire() to be KF_RCU | KF_RET_NULL, and
subsequently remove bpf_cgroup_kptr_get(). This patch does the first of
these by updating bpf_cgroup_acquire() to be KF_RCU | KF_RET_NULL, and
also updates selftests accordingly.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230411041633.179404-1-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Fix netfs_extract_iter_to_sg() for ITER_UBUF and ITER_IOVEC to set the
size of the page to the part of the page extracted, not the remaining
amount of data in the extracted page array at that point.
This doesn't yet affect anything as cifs, the only current user, only
passes in non-user-backed iterators.
Fixes: 0185846975 ("netfs: Add a function to extract an iterator into a scatterlist")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: Steve French <sfrench@samba.org>
Cc: Shyam Prasad N <nspmangalore@gmail.com>
Cc: Rohith Surabattula <rohiths.msft@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
TI CPSW uses of_platform_* functions which are declared in of_platform.h.
of_platform.h gets implicitly included by of_device.h, but that is going
to be removed soon. Nothing else depends on of_device.h so it can be
dropped. of_platform.h also implicitly includes platform_device.h, so
add an explicit include for it, too.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Smatch reports:
drivers/net/wwan/iosm/iosm_ipc_pcie.c:298 ipc_pcie_probe()
warn: missing unwind goto?
When dma_set_mask fails it directly returns without disabling pci
device and freeing ipc_pcie. Fix this my calling a correct goto label
As dma_set_mask returns either 0 or -EIO, we can use a goto label, as
it finally returns -EIO.
Add a set_mask_fail goto label which stands consistent with other goto
labels in this function..
Fixes: 035e3befc1 ("net: wwan: iosm: fix driver not working with INTEL_IOMMU disabled")
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With Eric's ref tracker, syzbot finally found a repro for
use-after-free in tcp_write_timer_handler() by kernel TCP
sockets. [0]
If SMC creates a kernel socket in __smc_create(), the kernel
socket is supposed to be freed in smc_clcsock_release() by
calling sock_release() when we close() the parent SMC socket.
However, at the end of smc_clcsock_release(), the kernel
socket's sk_state might not be TCP_CLOSE. This means that
we have not called inet_csk_destroy_sock() in __tcp_close()
and have not stopped the TCP timers.
The kernel socket's TCP timers can be fired later, so we
need to hold a refcnt for net as we do for MPTCP subflows
in mptcp_subflow_create_socket().
[0]:
leaked reference.
sk_alloc (./include/net/net_namespace.h:335 net/core/sock.c:2108)
inet_create (net/ipv4/af_inet.c:319 net/ipv4/af_inet.c:244)
__sock_create (net/socket.c:1546)
smc_create (net/smc/af_smc.c:3269 net/smc/af_smc.c:3284)
__sock_create (net/socket.c:1546)
__sys_socket (net/socket.c:1634 net/socket.c:1618 net/socket.c:1661)
__x64_sys_socket (net/socket.c:1672)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
==================================================================
BUG: KASAN: slab-use-after-free in tcp_write_timer_handler (net/ipv4/tcp_timer.c:378 net/ipv4/tcp_timer.c:624 net/ipv4/tcp_timer.c:594)
Read of size 1 at addr ffff888052b65e0d by task syzrepro/18091
CPU: 0 PID: 18091 Comm: syzrepro Tainted: G W 6.3.0-rc4-01174-gb5d54eb5899a #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.amzn2022.0.1 04/01/2014
Call Trace:
<IRQ>
dump_stack_lvl (lib/dump_stack.c:107)
print_report (mm/kasan/report.c:320 mm/kasan/report.c:430)
kasan_report (mm/kasan/report.c:538)
tcp_write_timer_handler (net/ipv4/tcp_timer.c:378 net/ipv4/tcp_timer.c:624 net/ipv4/tcp_timer.c:594)
tcp_write_timer (./include/linux/spinlock.h:390 net/ipv4/tcp_timer.c:643)
call_timer_fn (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/timer.h:127 kernel/time/timer.c:1701)
__run_timers.part.0 (kernel/time/timer.c:1752 kernel/time/timer.c:2022)
run_timer_softirq (kernel/time/timer.c:2037)
__do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:572)
__irq_exit_rcu (kernel/softirq.c:445 kernel/softirq.c:650)
irq_exit_rcu (kernel/softirq.c:664)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1107 (discriminator 14))
</IRQ>
Fixes: ac7138746e ("smc: establish new socket family")
Reported-by: syzbot+7e1e1bdb852961150198@syzkaller.appspotmail.com
Link: https://lore.kernel.org/netdev/000000000000a3f51805f8bcc43a@google.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove unused functions.
These functions may have some value in documenting the
hardware. But that information may be accessed via SCM history.
Flagged by clang-16 with W=1.
No functional change intended.
Compile tested only.
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver was incorrectly overwriting the cyclecounter bitmask,
which was truncating it and not aligning to the hardware mask value.
This isn't causing any issues, but it's wrong. Fix this by not
constraining the cyclecounter/hardware mask.
Luckily, this seems to cause no issues, which is why this change
doesn't have a fixes tag and isn't being sent to net. However, if
any transformations from time->cycles are needed in the future,
this change will be needed.
Suggested-by: Allen Hubbe <allen.hubbe@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sebastian Reichel says:
====================
stmmac: Fix RK3588 error prints
This fixes a couple of false positive error messages printed
by stmmac on RK3588. I expect them to go via net-next since
the fixes are not critical.
Changes since PATCHv1:
* https://lore.kernel.org/all/20230317174243.61500-1-sebastian.reichel@collabora.com/
* Add Fixes tags
* Use loop to request clocks
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The usual devm_regulator_get() call already handles "optional"
regulators by returning a valid dummy and printing a warning
that the dummy regulator should be described properly. This
code open coded the same behaviour, but masked any errors that
are not -EPROBE_DEFER and is quite noisy.
This change effectively unmasks and propagates regulators errors
not involving -ENODEV, downgrades the error print to warning level
if no regulator is specified and captures the probe defer message
for /sys/kernel/debug/devices_deferred.
Fixes: 2e12f53663 ("net: stmmac: dwmac-rk: Use standard devicetree property for phy regulator")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The clock requesting code is quite repetitive. Fix this by requesting
the clocks via devm_clk_bulk_get_optional. The optional variant has been
used, since this is effectively what the old code did. The exact clocks
required depend on the platform and configuration. As a side effect
this change adds correct -EPROBE_DEFER handling.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Fixes: 7ad269ea1a ("GMAC: add driver for Rockchip RK3288 SoCs integrated GMAC")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean says:
====================
DSA trace events
This series introduces the "dsa" trace event class, with the following
events:
$ trace-cmd list | grep dsa
dsa
dsa:dsa_fdb_add_hw
dsa:dsa_mdb_add_hw
dsa:dsa_fdb_del_hw
dsa:dsa_mdb_del_hw
dsa:dsa_fdb_add_bump
dsa:dsa_mdb_add_bump
dsa:dsa_fdb_del_drop
dsa:dsa_mdb_del_drop
dsa:dsa_fdb_del_not_found
dsa:dsa_mdb_del_not_found
dsa:dsa_lag_fdb_add_hw
dsa:dsa_lag_fdb_add_bump
dsa:dsa_lag_fdb_del_hw
dsa:dsa_lag_fdb_del_drop
dsa:dsa_lag_fdb_del_not_found
dsa:dsa_vlan_add_hw
dsa:dsa_vlan_del_hw
dsa:dsa_vlan_add_bump
dsa:dsa_vlan_del_drop
dsa:dsa_vlan_del_not_found
These are useful to debug refcounting issues on CPU and DSA ports, where
entries may remain lingering, or may be removed too soon, depending on
bugs in higher layers of the network stack.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
These are not as critical as the FDB/MDB trace points (I'm not aware of
outstanding VLAN related bugs), but maybe they are useful to somebody,
either debugging something or simply trying to learn more.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DSA performs non-trivial housekeeping of unicast and multicast addresses
on shared (CPU and DSA) ports, and puts a bit of pressure on higher
layers, requiring them to behave correctly (remove these addresses
exactly as many times as they were added). Otherwise, either addresses
linger around forever, or DSA returns -ENOENT complaining that entries
that were already deleted must be deleted again.
To aid debugging, introduce some trace points specifically for FDB and
MDB - that's where some of the bugs still are right now.
Some bugs I have seen were also due to race conditions, see:
- 630fd4822a ("net: dsa: flush switchdev workqueue on bridge join error path")
- a2614140dc ("net: dsa: mv88e6xxx: flush switchdev FDB workqueue before removing VLAN")
so it would be good to not disturb the timing too much, hence the choice
to use trace points vs regular dev_dbg().
I've had these for some time on my computer in a less polished form, and
they've proven useful. What I found most useful was to enable
CONFIG_BOOTTIME_TRACING, add "trace_event=dsa" to the kernel cmdline,
and run "cat /sys/kernel/debug/tracing/trace". This is to debug more
complex environments with network managers started by the init system,
things like that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Static code analyzer complains to unchecked return value.
The result of pci_reset_function() is unchecked.
Despite, the issue is on the FLR supported code path and in that
case reset can be done with pcie_flr(), the patch uses less invasive
approach by adding the result check of pci_reset_function().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 7e2cf4feba ("qlcnic: change driver hardware interface mechanism")
Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
iavf: fix racing in VLANs
Ahmed Zaki says:
This patchset mainly fixes a racing issue in the iavf where the number of
VLANs in the vlan_filter_list might be more than the PF limit. To fix that,
we get rid of the cvlans and svlans bitmaps and keep all the required info
in the list.
The second patch adds two new states that are needed so that we keep the
VLAN info while the interface goes DOWN:
-- DISABLE (notify PF, but keep the filter in the list)
-- INACTIVE (dev is DOWN, filter is removed from PF)
Finally, the current code keeps each state in a separate bit field, which
is error prone. The first patch refactors that by replacing all bits with
a single enum. The changes are minimal where each bit change is replaced
with the new state value.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: remove active_cvlans and active_svlans bitmaps
iavf: refactor VLAN filter states
====================
Link: https://lore.kernel.org/r/20230407210730.3046149-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix not setting Dath Path for broadcast sink
- Fix not cleaning up on LE Connection failure
- SCO: Fix possible circular locking dependency
- L2CAP: Fix use-after-free in l2cap_disconnect_{req,rsp}
- Fix race condition in hidp_session_thread
- btbcm: Fix logic error in forming the board name
- btbcm: Fix use after free in btsdio_remove
* tag 'for-net-2023-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: L2CAP: Fix use-after-free in l2cap_disconnect_{req,rsp}
Bluetooth: Set ISO Data Path on broadcast sink
Bluetooth: hci_conn: Fix possible UAF
Bluetooth: SCO: Fix possible circular locking dependency sco_sock_getsockopt
Bluetooth: SCO: Fix possible circular locking dependency on sco_connect_cfm
bluetooth: btbcm: Fix logic error in forming the board name.
Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition
Bluetooth: Fix race condition in hidp_session_thread
Bluetooth: Fix printing errors if LE Connection times out
Bluetooth: hci_conn: Fix not cleaning up on LE Connection failure
====================
Link: https://lore.kernel.org/r/20230410172718.4067798-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a new ICM area for that memory, so we need to handle it as we
did for the others ICM types.
The patch added that specific pool with its requirements and management.
Signed-off-by: Muhammad Sammar <muhammads@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The send engine should be ready to handle more opcodes
in addition to RDMA_WRITE/RDMA_READ.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add new WQE type: FLOW_TBL_ACCESS, which will be used for
writing modify header arguments.
This type has specific control segment and special data segment.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add enum value for modify-header argument object and mlx5_bits
for the related capabilities.
Signed-off-by: Muhammad Sammar <muhammads@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In STEv1 counter action can be set either by filling counter ID on STE, in
which case it is executed before other actions on this STE, or as a single
action, in which case it is executed in accordance with the actions order.
FW steering on STEv1 devices implements counter as counter ID on STE, and
this counter is set on the last STE.
Fix SMFS to be consistent with this behaviour - move TX counter to the
last STE, this way the counter will include all actions of the previous STEs
that might have changed packet headers length, e.g. encap, vlan push, etc.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Create a new profile for SFs in order to disable the command cache.
Each function command cache consumes ~500KB of memory, when using a
large number of SFs this savings is notable on memory constarined
systems.
Use a new profile to provide for future differences between SFs and PFs.
The mr_cache not used for non-PF functions, so it is excluded from the
new profile.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Bodong Wang <bodong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Pass target struct net_device to mdb attach/detach handler in order to
expose the port name to the new tracepoints. Implemented following
tracepoints:
- Attach mdb to port.
- Detach mdb from port.
Usage example:
># cd /sys/kernel/debug/tracing
># echo mlx5:mlx5_esw_bridge_port_mdb_attach >> set_event
># cat trace
...
kworker/0:0-19071 [000] ..... 259004.253848: mlx5_esw_bridge_port_mdb_attach: net_device=enp8s0f0_0 addr=33:33:ff:00:00:01 vid=0 num_ports=1 offloaded=1
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Implement support for add/del SWITCHDEV_OBJ_ID_PORT_MDB events. For mdb
destination addresses configure egress table rules to replicate to per-port
multicast tables of all ports that are member of the multicast group as
illustrated by 'MDB1' rule in the following diagram:
+--------+--+
+---------------------------------------> Port 1 | |
| +-^------+--+
| |
| |
+-----------------------------------------+ | +---------------------------+ |
| EGRESS table | | +--> PORT 1 multicast table | |
+----------------------------------+ +-----------------------------------------+ | | +---------------------------+ |
| INGRESS table | | | | | | | |
+----------------------------------+ | dst_mac=P1,vlan=X -> pop vlan, goto P1 +--+ | | FG0: | |
| | | dst_mac=P1,vlan=Y -> pop vlan, goto P1 | | | src_port=dst_port -> drop | |
| src_mac=M1,vlan=X -> goto egress +---> dst_mac=P2,vlan=X -> pop vlan, goto P2 +--+ | | FG1: | |
| ... | | dst_mac=P2,vlan=Y -> goto P2 | | | | VLAN X -> pop, goto port | |
| | | dst_mac=MDB1,vlan=Y -> goto mcast P1,P2 +-----+ | ... | |
+----------------------------------+ | | | | | VLAN Y -> pop, goto port +-------+
+-----------------------------------------+ | | | FG3: |
| | | matchall -> goto port |
| | | |
| | +---------------------------+
| |
| |
| | +--------+--+
+---------------------------------------> Port 2 | |
| +-^------+--+
| |
| |
| +---------------------------+ |
+--> PORT 2 multicast table | |
+---------------------------+ |
| | |
| FG0: | |
| src_port=dst_port -> drop | |
| FG1: | |
| VLAN X -> pop, goto port | |
| ... | |
| | |
| FG3: | |
| matchall -> goto port +-------+
| |
+---------------------------+
MDB is managed by extending mlx5 bridge to store an entry in
mlx5_esw_bridge->mdb_list linked list (used to iterate over all offloaded
MDBs) and mlx5_esw_bridge->mdb_ht hash table (used to lookup existing MDB
by MAC+VLAN). Every MDB entry can be attached to arbitrary amount of bridge
ports that are stored in mlx5_esw_bridge_mdb_entry->ports xarray in order
to allow both efficient lookup of the port and also iteration over all
ports that the entry is attached to. Every time MDB is attached/detached
to/from a port, the hardware rule is recreated with list of destinations
corresponding to all attached ports. When the entry is detached from the
last port it is removed from mdb and destroyed which means that the ports
xarray also acts as implicit reference counting mechanism.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When VLAN with 'untagged' flag is created on port also provision the
per-port multicast table rule to pop the VLAN during packet replication.
This functionality must be in per-port table because some subset of ports
that are member of multicast group can require just a match on VLAN (trunk
mode) while other subset can be configured to remove the VLAN tag from
packets received on the ports (access mode).
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Multicast replication requires adding one more level of FDB_BR_OFFLOAD
priority flow tables. The new level is used for per-port multicast-specific
tables that have following flow groups structure (flow highest to lowest
priority):
- Flow group of size one that matches on source port metadata. This will
have a static single rule that prevent packets from being replicated to
their source port.
- Flow group of size one that matches all packets and forwards them to the
port that owns the table.
Initialize the table dynamically on all bridge ports when adding a port to
the bridge that has multicast enabled and on all existing bridge ports when
receiving multicast enable notification.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Handle SWITCHDEV_ATTR_ID_BRIDGE_MC_DISABLED attribute notification to
dynamically toggle bridge multicast offload. Set new
MLX5_ESW_BRIDGE_MCAST_FLAG bridge flag when multicast offload is enabled.
Put multicast-specific code into new bridge_mcast.c file.
When initializing bridge multicast pipeline create a static rule for
snooping on IGMP traffic and three rules for snooping on MLD traffic (for
query, report and done message types). Note that matching MLD traffic
requires having flexparser MLX5_FLEX_PROTO_ICMPV6 capability enabled.
By default Linux bridge is created with multicast enabled which can be
modified by 'mcast_snooping' argument:
$ ip link set name my_bridge type bridge mcast_snooping 0
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The pattern when function looks up a port by vport_num+vhca_id tuple in
order to just obtain its parent bridge is repeated multiple times in
bridge.c file. Further commits in this series use the pattern even more.
Extract the pattern to standalone mlx5_esw_bridge_from_port_lookup()
function to improve code readability.
This commits doesn't change functionality.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Following patches in series will require accessing flow tables and groups
sizes, table levels and struct mlx5_esw_bridge from new the new source file
dedicated to multicast code. Expose these data in bridge_priv.h to reduce
clutter in following patches that will implement the actual functionality.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Bridge ingress and egress tables got more flow groups recently for QinQ
support and will get more in following patches of this series. Increase the
sizes of the tables to allow offloading more flows in each mode.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
