PD#SWPL-3826
Problem:
optimize the power consumption of tl1 with vad wakeup
Solution:
optimize the power consumption when enter freeze mode
switch the clk81 to 24M
cpu and dsu clk switch to gp1 pll，frequency is 600M
closed the fixed pll
closed the vddio_3.3V
Verify:
TL1 revB
Change-Id: I39170bb8efb91b126b6a15faad3cefee19b13089
Signed-off-by: zhiqiang liang <zhiqiang.liang@amlogic.com>
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
PD#SWPL-14024
Problem:
add protection mechanism for all plls
Solution:
add protection mechanism for all plls
Verify:
test passed on
1)axg
2)g12a
3)txl
4)txlx
Change-Id: I6f29026422f73c690854d5ffa292857d14922d22
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
PD#SWPL-14115
Problem:
DV is bypass for SDR->SDR case on sm1, but
bypass failed due to dolby_vision_status is
not sync with uboot.
Solution:
Update dolby_vision_status after startup.
Verify:
passed on sm1
Change-Id: I8025b0982ce5bfb2afc5ece1b5f14be54f3a80d6
Signed-off-by: yao liu <yao.liu@amlogic.com>
PD#SH-1185
Problem:
AXG need to support secure upgrade check
Solution:
1.add defendkey support in AXG dts
2.add defendkey config in smarthome defconfig
Verify:
AXG skt board verify pass
Change-Id: I1d173d4e7ce8d47c486bf8df4f6b7e417809c424
Signed-off-by: Zhongfu Luo <zhongfu.luo@amlogic.com>
PD#SWPL-14033
Problem:
if clk invert bit set, 100M will not connect
Solution:
don't invert clk when connect 100M network
Verify:
w400
Change-Id: I4c3acbcc0d05fc2c99b5a982461ab3d5ff83fe26
Signed-off-by: qi duan <qi.duan@amlogic.com>
PD#SWPL-12602
Problem:
omni phy can not connect network probably
after long stress suspend test
for gxl/txl/txlx
Solution:
In suspend/resume sequeue, add eth reset
Verify:
verify on p212/r311
Change-Id: I4b6ab34eb2eae40533f4a33db8fb40a00f5b3d51
Signed-off-by: qi duan <qi.duan@amlogic.com>
PD#SWPL-12746
Problem:
VAD does not use HIFI PLL, it will effect vad wakup
Solution:
VAD use HIFI PLL
Verify:
T962X2_X301
Change-Id: Iad13661c4ec3495130f485447f3c8b034bee9ce2
Signed-off-by: jian.zhou <jian.zhou@amlogic.com>
PD#SWPL-13914
Problem:
G12A TDMA affects the tuning, make tuning process
+/- dly is useless.
Solution:
add pdata save val operation.
Verify:
G12A_u212
Change-Id: I204dd989fae0d400b14725df068378be0262b1cc
Signed-off-by: Nan Li <nan.li@amlogic.com>
PD#SWPL-14102
Problem:
need to detect out of range signal
correctly
Solution:
refine the checking
Verify:
tl1
Change-Id: Ia2e47ca3a427e4f66a5464997aeb8dd766b4f7ff
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
PD#SWPL-14041
Problem:
sometimes after hpcp_hpd 0->1, ESM doesn't
respond to AKE_INIT, it will lead to flash
red screen on TCL DCLS-HG50
Solution:
add control for hpcp_hpd, keep it high by default
Verify:
X301
Change-Id: I8f8e5c880400084d6ed252667460c4e397b9909d
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>
PD#SWPL-12796
Problem:
tm2 is run hs200 200M now
Solution:
modify dts
Verify:
passed on tm2_t962e2_ab311
Change-Id: If834e822aefe3c9b469ff69ce58672a94caaabb4
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
PD#SWPL-13103
Problem:
S905Y2 can not use adb.
Solution:
config dts, and switch the state in uboot.
setenv otg_device 0 or 1.
Verify:
verify by faraday.
Change-Id: If4cda761e346fb63d6918db74bc03f23cdcb3a1b
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>
PD#SWPL-11936
Problem:
set screen position frequently
frame flashes white stripes
Solution:
modify threshold for updating all registers
on vsync coming
Verify:
Verfied on u212
Change-Id: Iac1ec8b5ec36809d5f5ffe2fe8e79c182e9c126b
Signed-off-by: Cao Jian <jian.cao@amlogic.com>
PD#SWPL-13948
Problem:
customer want to set hdr tone mapping curve themself,
we provide hdr interface for them
Solution:
add hdr iocontrol interface
Verify:
verify on TL1
Change-Id: I9b7d5b33e0a72c6d1ca1fca2ebffe2a3c7e460aa
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
PD#SWPL-13523
Problem:
gxm can't enter suspend
Solution:
modify the system sleep parameter
Verify:
gxm_q201
Change-Id: I697f03170a56925aa0fdb2160340cc0d480623a8
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
PD#SWPL-13880
Problem:
free_irq was called twice continuously while ponter is NULL at 2nd time.
Solution:
use mutex to prevent reentry
Verify:
verified by t962x2_x301
Change-Id: I8032d15de0a2fe5a1ab30b70af0e342d0aa3ac40
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
PD#SWPL-13378
Problem:
BUG: KASAN: use-after-free in di_task_handle+0x1dc/0x790
Solution:
add judgement before use
Verify:
u212
Change-Id: I6281257997239fa9adbe215ca31ef7d760c9302c
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#SWPL-11934
Problem:
pcie pll lock failed some times
Solution:
1.add retry mechanism when pcie lock failed
2.add protection mechanism for all plls
Verify:
test passed on tm2 ab311
Change-Id: Id34e87d84e2bc2368c074556f500f8af1f2a4088
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
PD#SWPL-13664
Problem:
when open some special UI app, DI will have a lot of timeout,
this cause display abnormal.
Solution:
add retry after timeout;
Verify:
tl1
Change-Id: I3316252577bad218256651ebbc6d4fd8b25acb12
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#SWPL-13075
Problem:
some pattern need special handling
Solution:
per VLSI'e suggestion, add pattern
detection to try to detect special pattern
Verify:
tl1
Change-Id: I545b6e8c1b4a11fca927be46f16caeeb2cbe5327
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
PD#OTT-5603
Problem:
Configurate GPIO_AO 9 as mclk_0,it doesn't work.
Solution:
From SM1, the mclk pad register is changed.
Using standard clk tree to make it compitable.
Verify:
TM2, SM1.
Change-Id: I8d53296297536c90768495232570f33fc89db131
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#TV-8586
Problem:
av pali need update 0x18b setting
Solution:
update 0x18b setting for av pali for tl1
Verify:
x301
Change-Id: I64bddac5c4196110b46ebfbd7a89ee97095a7f82
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
PD#SWPL-12002
Problem:
pause and plug out/in hdmi tx, display abnormal
Solution:
add condition for switch to EI in de_post_process
ref to IPTV's project
Verify:
G12A
Change-Id: I6230464c308660c62199aa24ad5843e7c7bd070d
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
PD#SWPL-13676
Problem:
vdin status is confused when enter hdmi
Solution:
reset afifo every time enter the channel
Verify:
verified by t962x2_x301
Change-Id: I9ec78bebec4d2d5e312de82942c29a940fc322ea
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
PD#SWPL-13367
Problem:
HDMI hotplugged during video pause,
system control first set disable_video 1,
then DV core turn on due to sink changed,
then OMX sets disable video 2. DV core 1
is disabled after video_onoff_state is set to OFF.
Solution:
Monitor video status, parser and toggle once
to enable core1 when video off->on.
Verify:
SM1
Change-Id: Ied6f1f05ed1592f9917c093b5d567904a3bdc61c
Signed-off-by: yao liu <yao.liu@amlogic.com>
PD#SWPL-13667
Problem:
some devices may forcely send signal above 3.4G
even if TV announce hdmi1.4 edid, such as apple
TV box, Samsung UBD-K8500 dvd; and for QD6508 box
of TCL, it will not send signal out if scdc NAK
Solution:
add a scdc force enable option to cover this
issue. by default, scdc is enabled or not
accroding to current edid version
Verify:
X301
Change-Id: Ibdacbd3bb1edbdcb99637252530d19510fbcfb1d
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>
PD#SWPL-13779
Problem:
esm can not work after burning a new key and regenerating new
fw.le as the esm clock was not configured when probe.
Solution:
so we need to configure ESM clock no matter hdcp2.2
is burned or not.
Verify:
None
Change-Id: I793b63ad2f20434b9f8f27ccca7c80dee2990718
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
PD#SWPL-13491
Problem:
After plugging and unplugging HDMITX,
the panel screen color display is abnormal
for dual display platform.
Solution:
add vinfo->mode check for csc process,
avoid process null and invalid vinfo case.
Verify:
verify by AC202(sm1)
Change-Id: I54c54adcf2a0fc9a02e35b0ef24a720a55a8781a
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
PD#SWPL-2049
Problem:
osd3 din blend config may be incorrect when viu2 is enable
Solution:
add osd blend reg config check
Verify:
verify by AC202(sm1)
Change-Id: I3d8ff0d247226d4df1386808caba2a21a34f0b10
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
PD#SWPL-13498
Problem:
The printing may delay the usb_disconnect processing, result to
USB transfer error during reconnecting.
Solution:
Moving the print in proc_setconfig of devio.c .
Verify:
test pass on sm1
Change-Id: I5c45abb2d5d640e2e02dc3e0c08b10ca7a294eeb
Signed-off-by: he.he <he.he@amlogic.com>
PD#TV-8363
Problem:
Loopback doesn't work on TM2.
TL1 doesn't support loopback in OE pins.
Solution:
Make it compitable with chips.
Add tdm_lb format and chmasks.
Verify:
TM2 AB311 and TL1 X301.
Change-Id: If878fe75fc87857eae7a44439a451c5b2f494c67
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#SWPL-13669
Problem:
Ge2d irq number is wrong on g12a/g12b/sm1.
Solution:
Replace the correct number
Verify:
Verified on u212
Change-Id: Ia3d202dc10cb978033892efb1de251bf5cf1df31
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
PD#TV-8989
Problem:
loopback with datain pdm, no vad to wakeup
Solution:
loopback with pdmin still works when entry freeze mode
vad works in two channel mode, mapping pdm ch0 & ch1 to vad
add channel num to loopback for vad
Verify:
x301
Change-Id: Ied244292bf2a2f668bb5a2216ec6a12964a46663
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
PD#SWPL-12502
Problem:
new function
Solution:
add new function of TM2
Verify:
T962E2
Change-Id: Idd5843d39bb9235fe0abdf9aaaca3be6dd2795e7
Signed-off-by: Lei Yang <lei.yang@amlogic.com>
PD#SWPL-13623
Problem:
Wayland-DRM broken due to lcd-drm is enabled
Solution:
Disable lcd-drm
Verify:
Local
Change-Id: I2e4c7cded9e6979b97fb652e2d0d824c8af54ef6
Signed-off-by: Blance Tang <guofeng.tang@amlogic.com>
PD#SWPL-13556
Problem:
hdmi signal has changed(color space, hdr etc.) before switch source
Solution:
clear the change flag when stop dec
Verify:
verified by t962x2_x301
Change-Id: I79c6dba9bf69f70850714c5810ae724b5d35e1e3
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
