mirror of
https://github.com/hardkernel/linux.git
synced 2026-03-26 20:40:24 +09:00
b6fd46aaf1802a61ba68ec385bb4be32c6ecf144
17 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Greg Kroah-Hartman
|
9f5bde3ccf |
Merge 5.15.121 into android14-5.15-lts
Changes in 5.15.121
netfilter: nf_tables: drop map element references from preparation phase
fs: pipe: reveal missing function protoypes
x86/resctrl: Only show tasks' pid in current pid namespace
blk-iocost: use spin_lock_irqsave in adjust_inuse_and_calc_cost
md/raid10: check slab-out-of-bounds in md_bitmap_get_counter
md/raid10: fix overflow of md/safe_mode_delay
md/raid10: fix wrong setting of max_corr_read_errors
md/raid10: fix null-ptr-deref of mreplace in raid10_sync_request
md/raid10: fix io loss while replacement replace rdev
irqchip/jcore-aic: Fix missing allocation of IRQ descriptors
svcrdma: Prevent page release when nothing was received
posix-timers: Prevent RT livelock in itimer_delete()
tracing/timer: Add missing hrtimer modes to decode_hrtimer_mode().
clocksource/drivers/cadence-ttc: Fix memory leak in ttc_timer_probe
PM: domains: fix integer overflow issues in genpd_parse_state()
perf/arm-cmn: Fix DTC reset
powercap: RAPL: Fix CONFIG_IOSF_MBI dependency
ARM: 9303/1: kprobes: avoid missing-declaration warnings
cpufreq: intel_pstate: Fix energy_performance_preference for passive
thermal/drivers/sun8i: Fix some error handling paths in sun8i_ths_probe()
rcutorture: Correct name of use_softirq module parameter
rcuscale: Always log error message
rcuscale: Move shutdown from wait_event() to wait_event_idle()
rcu/rcuscale: Move rcu_scale_*() after kfree_scale_cleanup()
rcu/rcuscale: Stop kfree_scale_thread thread(s) after unloading rcuscale
kselftest: vDSO: Fix accumulation of uninitialized ret when CLOCK_REALTIME is undefined
perf/ibs: Fix interface via core pmu events
x86/mm: Fix __swp_entry_to_pte() for Xen PV guests
locking/atomic: arm: fix sync ops
evm: Complete description of evm_inode_setattr()
evm: Fix build warnings
ima: Fix build warnings
pstore/ram: Add check for kstrdup
igc: Enable and fix RX hash usage by netstack
wifi: ath9k: fix AR9003 mac hardware hang check register offset calculation
wifi: ath9k: avoid referencing uninit memory in ath9k_wmi_ctrl_rx
libbpf: btf_dump_type_data_check_overflow needs to consider BTF_MEMBER_BITFIELD_SIZE
samples/bpf: Fix buffer overflow in tcp_basertt
spi: spi-geni-qcom: Correct CS_TOGGLE bit in SPI_TRANS_CFG
wifi: wilc1000: fix for absent RSN capabilities WFA testcase
wifi: mwifiex: Fix the size of a memory allocation in mwifiex_ret_802_11_scan()
sctp: add bpf_bypass_getsockopt proto callback
libbpf: fix offsetof() and container_of() to work with CO-RE
bpf: Don't EFAULT for {g,s}setsockopt with wrong optlen
spi: dw: Round of n_bytes to power of 2
nfc: llcp: fix possible use of uninitialized variable in nfc_llcp_send_connect()
bpftool: JIT limited misreported as negative value on aarch64
regulator: core: Fix more error checking for debugfs_create_dir()
regulator: core: Streamline debugfs operations
wifi: orinoco: Fix an error handling path in spectrum_cs_probe()
wifi: orinoco: Fix an error handling path in orinoco_cs_probe()
wifi: atmel: Fix an error handling path in atmel_probe()
wl3501_cs: use eth_hw_addr_set()
wifi: wl3501_cs: Fix an error handling path in wl3501_probe()
wifi: ray_cs: Utilize strnlen() in parse_addr()
wifi: ray_cs: Drop useless status variable in parse_addr()
wifi: ray_cs: Fix an error handling path in ray_probe()
wifi: ath9k: don't allow to overwrite ENDPOINT0 attributes
selftests/bpf: Fix check_mtu using wrong variable type
wifi: rsi: Do not configure WoWlan in shutdown hook if not enabled
wifi: rsi: Do not set MMC_PM_KEEP_POWER in shutdown
watchdog/perf: define dummy watchdog_update_hrtimer_threshold() on correct config
watchdog/perf: more properly prevent false positives with turbo modes
kexec: fix a memory leak in crash_shrink_memory()
memstick r592: make memstick_debug_get_tpc_name() static
wifi: ath9k: Fix possible stall on ath9k_txq_list_has_key()
rtnetlink: extend RTEXT_FILTER_SKIP_STATS to IFLA_VF_INFO
wifi: iwlwifi: pull from TXQs with softirqs disabled
iwlwifi: don't dump_stack() when we get an unexpected interrupt
wifi: iwlwifi: pcie: fix NULL pointer dereference in iwl_pcie_irq_rx_msix_handler()
wifi: cfg80211: rewrite merging of inherited elements
wifi: iwlwifi: mvm: indicate HW decrypt for beacon protection
wifi: ath9k: convert msecs to jiffies where needed
bpf: Omit superfluous address family check in __bpf_skc_lookup
bpf: Factor out socket lookup functions for the TC hookpoint.
bpf: Call __bpf_sk_lookup()/__bpf_skc_lookup() directly via TC hookpoint
bpf: Fix bpf socket lookup from tc/xdp to respect socket VRF bindings
can: length: fix bitstuffing count
igc: Fix race condition in PTP tx code
net: stmmac: fix double serdes powerdown
netlink: fix potential deadlock in netlink_set_err()
netlink: do not hard code device address lenth in fdb dumps
bonding: do not assume skb mac_header is set
selftests: rtnetlink: remove netdevsim device after ipsec offload test
gtp: Fix use-after-free in __gtp_encap_destroy().
net: axienet: Move reset before 64-bit DMA detection
sfc: fix crash when reading stats while NIC is resetting
nfc: llcp: simplify llcp_sock_connect() error paths
net: nfc: Fix use-after-free caused by nfc_llcp_find_local
lib/ts_bm: reset initial match offset for every block of text
netfilter: conntrack: dccp: copy entire header to stack buffer, not just basic one
netfilter: nf_conntrack_sip: fix the ct_sip_parse_numerical_param() return value.
ipvlan: Fix return value of ipvlan_queue_xmit()
netlink: Add __sock_i_ino() for __netlink_diag_dump().
drm/amd/display: Add logging for display MALL refresh setting
radeon: avoid double free in ci_dpm_init()
drm/amd/display: Explicitly specify update type per plane info change
Input: drv260x - sleep between polling GO bit
drm/bridge: tc358768: always enable HS video mode
drm/bridge: tc358768: fix PLL parameters computation
drm/bridge: tc358768: fix PLL target frequency
drm/bridge: tc358768: fix TCLK_ZEROCNT computation
drm/bridge: tc358768: Add atomic_get_input_bus_fmts() implementation
drm/bridge: tc358768: fix TCLK_TRAILCNT computation
drm/bridge: tc358768: fix THS_ZEROCNT computation
drm/bridge: tc358768: fix TXTAGOCNT computation
drm/bridge: tc358768: fix THS_TRAILCNT computation
drm/vram-helper: fix function names in vram helper doc
ARM: dts: BCM5301X: Drop "clock-names" from the SPI node
ARM: dts: meson8b: correct uart_B and uart_C clock references
Input: adxl34x - do not hardcode interrupt trigger type
drm: sun4i_tcon: use devm_clk_get_enabled in `sun4i_tcon_init_clocks`
drm/panel: sharp-ls043t1le01: adjust mode settings
ARM: dts: stm32: Move ethernet MAC EEPROM from SoM to carrier boards
bus: ti-sysc: Fix dispc quirk masking bool variables
arm64: dts: microchip: sparx5: do not use PSCI on reference boards
clk: imx: scu: use _safe list iterator to avoid a use after free
RDMA/bnxt_re: Disable/kill tasklet only if it is enabled
RDMA/bnxt_re: Fix to remove unnecessary return labels
RDMA/bnxt_re: Use unique names while registering interrupts
RDMA/bnxt_re: Remove a redundant check inside bnxt_re_update_gid
RDMA/bnxt_re: Fix to remove an unnecessary log
drm/msm/dsi: don't allow enabling 14nm VCO with unprogrammed rate
drm/msm/disp/dpu: get timing engine status from intf status register
drm/msm/dpu: Set DPU_DATA_HCTL_EN for in INTF_SC7180_MASK
ARM: dts: gta04: Move model property out of pinctrl node
arm64: dts: qcom: msm8916: correct camss unit address
arm64: dts: qcom: msm8994: correct SPMI unit address
arm64: dts: qcom: msm8996: correct camss unit address
arm64: dts: qcom: sdm630: correct camss unit address
arm64: dts: qcom: sdm845: correct camss unit address
arm64: dts: qcom: db820c: Move blsp1_uart2 pin states to msm8996.dtsi
arm64: dts: qcom: apq8016-sbc: Update modem and WiFi firmware path
arm64: dts: qcom: apq8016-sbc: Clarify firmware-names
arm64: dts: qcom: apq8016-sbc: fix mpps state names
arm64: dts: qcom: Drop unneeded extra device-specific includes
arm64: dts: qcom: apq8016-sbc: Fix regulator constraints
arm64: dts: qcom: apq8016-sbc: Fix 1.8V power rail on LS expansion
drm/panel: simple: fix active size for Ampire AM-480272H3TMQW-T01H
ARM: ep93xx: fix missing-prototype warnings
ARM: omap2: fix missing tick_broadcast() prototype
arm64: dts: qcom: apq8096: fix fixed regulator name property
arm64: dts: mediatek: mt8183: Add mediatek,broken-save-restore-fw to kukui
ARM: dts: stm32: Shorten the AV96 HDMI sound card name
memory: brcmstb_dpfe: fix testing array offset after use
ASoC: es8316: Increment max value for ALC Capture Target Volume control
ASoC: es8316: Do not set rate constraints for unsupported MCLKs
ARM: dts: meson8: correct uart_B and uart_C clock references
soc/fsl/qe: fix usb.c build errors
RDMA/irdma: avoid fortify-string warning in irdma_clr_wqes
IB/hfi1: Use bitmap_zalloc() when applicable
IB/hfi1: Fix wrong mmu_node used for user SDMA packet after invalidate
RDMA/hns: Fix hns_roce_table_get return value
ARM: dts: iwg20d-q7-common: Fix backlight pwm specifier
arm64: dts: renesas: ulcb-kf: Remove flow control for SCIF1
fbdev: omapfb: lcd_mipid: Fix an error handling path in mipid_spi_probe()
arm64: dts: ti: k3-j7200: Fix physical address of pin
ARM: dts: stm32: Fix audio routing on STM32MP15xx DHCOM PDK2
ARM: dts: stm32: fix i2s endpoint format property for stm32mp15xx-dkx
hwmon: (gsc-hwmon) fix fan pwm temperature scaling
hwmon: (adm1275) Allow setting sample averaging
hwmon: (pmbus/adm1275) Fix problems with temperature monitoring on ADM1272
ARM: dts: BCM5301X: fix duplex-full => full-duplex
drm/amdkfd: Fix potential deallocation of previously deallocated memory.
drm/amd/display: Fix artifacting on eDP panels when engaging freesync video mode
drm/radeon: fix possible division-by-zero errors
amdgpu: validate offset_in_bo of drm_amdgpu_gem_va
drm/msm/a5xx: really check for A510 in a5xx_gpu_init
RDMA/bnxt_re: wraparound mbox producer index
RDMA/bnxt_re: Avoid calling wake_up threads from spin_lock context
clk: imx: clk-imx8mn: fix memory leak in imx8mn_clocks_probe
clk: imx: clk-imx8mp: improve error handling in imx8mp_clocks_probe()
arm64: dts: qcom: sm8250-edo: Panel framebuffer is 2.5k instead of 4k
clk: clocking-wizard: Fix Oops in clk_wzrd_register_divider()
clk: tegra: tegra124-emc: Fix potential memory leak
ALSA: ac97: Fix possible NULL dereference in snd_ac97_mixer
drm/msm/dpu: do not enable color-management if DSPPs are not available
drm/msm/dp: Free resources after unregistering them
arm64: dts: mediatek: Add cpufreq nodes for MT8192
arm64: dts: mediatek: mt8192: Fix CPUs capacity-dmips-mhz
drm/msm/dpu: correct MERGE_3D length
clk: vc5: check memory returned by kasprintf()
clk: cdce925: check return value of kasprintf()
clk: si5341: return error if one synth clock registration fails
clk: si5341: check return value of {devm_}kasprintf()
clk: si5341: free unused memory on probe failure
clk: keystone: sci-clk: check return value of kasprintf()
clk: ti: clkctrl: check return value of kasprintf()
drivers: meson: secure-pwrc: always enable DMA domain
ovl: update of dentry revalidate flags after copy up
ASoC: imx-audmix: check return value of devm_kasprintf()
clk: Fix memory leak in devm_clk_notifier_register()
PCI: cadence: Fix Gen2 Link Retraining process
PCI: vmd: Reset VMD config register between soft reboots
scsi: qedf: Fix NULL dereference in error handling
pinctrl: bcm2835: Handle gpiochip_add_pin_range() errors
PCI/ASPM: Disable ASPM on MFD function removal to avoid use-after-free
scsi: 3w-xxxx: Add error handling for initialization failure in tw_probe()
PCI: pciehp: Cancel bringup sequence if card is not present
PCI: ftpci100: Release the clock resources
PCI: Add pci_clear_master() stub for non-CONFIG_PCI
perf bench: Use unbuffered output when pipe/tee'ing to a file
perf bench: Add missing setlocale() call to allow usage of %'d style formatting
pinctrl: cherryview: Return correct value if pin in push-pull mode
kcsan: Don't expect 64 bits atomic builtins from 32 bits architectures
powerpc/interrupt: Don't read MSR from interrupt_exit_kernel_prepare()
powerpc/signal32: Force inlining of __unsafe_save_user_regs() and save_tm_user_regs_unsafe()
perf script: Fix allocation of evsel->priv related to per-event dump files
perf dwarf-aux: Fix off-by-one in die_get_varname()
powerpc/64s: Fix VAS mm use after free
pinctrl: microchip-sgpio: check return value of devm_kasprintf()
pinctrl: at91-pio4: check return value of devm_kasprintf()
powerpc/powernv/sriov: perform null check on iov before dereferencing iov
powerpc: simplify ppc_save_regs
powerpc: update ppc_save_regs to save current r1 in pt_regs
riscv: uprobes: Restore thread.bad_cause
powerpc/book3s64/mm: Fix DirectMap stats in /proc/meminfo
powerpc/mm/dax: Fix the condition when checking if altmap vmemap can cross-boundary
hwrng: virtio - add an internal buffer
hwrng: virtio - don't wait on cleanup
hwrng: virtio - don't waste entropy
hwrng: virtio - always add a pending request
hwrng: virtio - Fix race on data_avail and actual data
modpost: remove broken calculation of exception_table_entry size
crypto: nx - fix build warnings when DEBUG_FS is not enabled
modpost: fix section mismatch message for R_ARM_ABS32
modpost: fix section mismatch message for R_ARM_{PC24,CALL,JUMP24}
crypto: marvell/cesa - Fix type mismatch warning
modpost: fix off by one in is_executable_section()
ARC: define ASM_NL and __ALIGN(_STR) outside #ifdef __ASSEMBLY__ guard
crypto: qat - honor CRYPTO_TFM_REQ_MAY_SLEEP flag
crypto: qat - replace get_current_node() with numa_node_id()
crypto: qat - use reference to structure in dma_map_single()
crypto: kpp - Add helper to set reqsize
crypto: qat - Use helper to set reqsize
crypto: qat - unmap buffer before free for DH
crypto: qat - unmap buffers before free for RSA
NFSv4.1: freeze the session table upon receiving NFS4ERR_BADSESSION
SMB3: Do not send lease break acknowledgment if all file handles have been closed
dax: Fix dax_mapping_release() use after free
dax: Introduce alloc_dev_dax_id()
dax/kmem: Pass valid argument to memory_group_register_static
hwrng: st - keep clock enabled while hwrng is registered
kbuild: Disable GCOV for *.mod.o
efi/libstub: Disable PCI DMA before grabbing the EFI memory map
ksmbd: avoid field overflow warning
ACPI: utils: Fix acpi_evaluate_dsm_typed() redefinition error
bootmem: remove the vmemmap pages from kmemleak in free_bootmem_page
io_uring: ensure IOPOLL locks around deferred work
USB: serial: option: add LARA-R6 01B PIDs
usb: dwc3: gadget: Propagate core init errors to UDC during pullup
phy: tegra: xusb: Clear the driver reference in usb-phy dev
iio: adc: ad7192: Fix null ad7192_state pointer access
iio: adc: ad7192: Fix internal/external clock selection
iio: accel: fxls8962af: errata bug only applicable for FXLS8962AF
iio: accel: fxls8962af: fixup buffer scan element type
ALSA: hda/realtek: Add quirk for Clevo NPx0SNx
ALSA: jack: Fix mutex call in snd_jack_report()
block: fix signed int overflow in Amiga partition support
block: add overflow checks for Amiga partition support
block: change all __u32 annotations to __be32 in affs_hardblocks.h
block: increment diskseq on all media change events
SUNRPC: Fix UAF in svc_tcp_listen_data_ready()
w1: w1_therm: fix locking behavior in convert_t
w1: fix loop in w1_fini()
sh: j2: Use ioremap() to translate device tree address into kernel memory
usb: dwc2: platform: Improve error reporting for problems during .remove()
usb: dwc2: Fix some error handling paths
serial: 8250: omap: Fix freeing of resources on failed register
clk: qcom: camcc-sc7180: Add parent dependency to all camera GDSCs
clk: qcom: gcc-ipq6018: Use floor ops for sdcc clocks
media: usb: Check az6007_read() return value
media: videodev2.h: Fix struct v4l2_input tuner index comment
media: usb: siano: Fix warning due to null work_func_t function pointer
media: i2c: Correct format propagation for st-mipid02
clk: qcom: reset: Allow specifying custom reset delay
clk: qcom: reset: support resetting multiple bits
clk: qcom: ipq6018: fix networking resets
usb: dwc3: qcom: Fix potential memory leak
usb: gadget: u_serial: Add null pointer check in gserial_suspend
extcon: Fix kernel doc of property fields to avoid warnings
extcon: Fix kernel doc of property capability fields to avoid warnings
usb: phy: phy-tahvo: fix memory leak in tahvo_usb_probe()
usb: hide unused usbfs_notify_suspend/resume functions
serial: 8250: lock port for stop_rx() in omap8250_irq()
serial: 8250: lock port for UART_IER access in omap8250_irq()
kernfs: fix missing kernfs_idr_lock to remove an ID from the IDR
coresight: Fix loss of connection info when a module is unloaded
mfd: rt5033: Drop rt5033-battery sub-device
media: venus: helpers: Fix ALIGN() of non power of two
media: atomisp: gmin_platform: fix out_len in gmin_get_config_dsm_var()
KVM: s390: fix KVM_S390_GET_CMMA_BITS for GFNs in memslot holes
usb: dwc3: qcom: Release the correct resources in dwc3_qcom_remove()
usb: dwc3: qcom: Fix an error handling path in dwc3_qcom_probe()
usb: common: usb-conn-gpio: Set last role to unknown before initial detection
usb: dwc3-meson-g12a: Fix an error handling path in dwc3_meson_g12a_probe()
mfd: intel-lpss: Add missing check for platform_get_resource
Revert "usb: common: usb-conn-gpio: Set last role to unknown before initial detection"
serial: 8250_omap: Use force_suspend and resume for system suspend
test_firmware: return ENOMEM instead of ENOSPC on failed memory allocation
nvmem: rmem: Use NVMEM_DEVID_AUTO
mfd: stmfx: Fix error path in stmfx_chip_init
mfd: stmfx: Nullify stmfx->vdd in case of error
KVM: s390: vsie: fix the length of APCB bitmap
KVM: s390/diag: fix racy access of physical cpu number in diag 9c handler
mfd: stmpe: Only disable the regulators if they are enabled
phy: tegra: xusb: check return value of devm_kzalloc()
pwm: imx-tpm: force 'real_period' to be zero in suspend
pwm: sysfs: Do not apply state to already disabled PWMs
pwm: ab8500: Fix error code in probe()
pwm: mtk_disp: Fix the disable flow of disp_pwm
md/raid10: fix the condition to call bio_end_io_acct()
rtc: st-lpc: Release some resources in st_rtc_probe() in case of error
drm/i915/psr: Use hw.adjusted mode when calculating io/fast wake times
media: cec: i2c: ch7322: also select REGMAP
sctp: fix potential deadlock on &net->sctp.addr_wq_lock
net/sched: act_ipt: add sanity checks on table name and hook locations
Add MODULE_FIRMWARE() for FIRMWARE_TG357766.
ibmvnic: Do not reset dql stats on NON_FATAL err
net: dsa: vsc73xx: fix MTU configuration
spi: bcm-qspi: return error if neither hif_mspi nor mspi is available
mailbox: ti-msgmgr: Fill non-message tx data fields with 0x0
f2fs: fix error path handling in truncate_dnode()
octeontx2-af: Fix mapping for NIX block from CGX connection
octeontx2-af: Add validation before accessing cgx and lmac
ntfs: Fix panic about slab-out-of-bounds caused by ntfs_listxattr()
powerpc: allow PPC_EARLY_DEBUG_CPM only when SERIAL_CPM=y
net: bridge: keep ports without IFF_UNICAST_FLT in BR_PROMISC mode
tcp: annotate data races in __tcp_oow_rate_limited()
xsk: Honor SO_BINDTODEVICE on bind
net/sched: act_pedit: Add size check for TCA_PEDIT_PARMS_EX
riscv: move memblock_allow_resize() after linear mapping is ready
pptp: Fix fib lookup calls.
net: dsa: tag_sja1105: fix MAC DA patching from meta frames
octeontx-af: fix hardware timestamp configuration
s390/qeth: Fix vipa deletion
sh: dma: Fix DMA channel offset calculation
apparmor: fix missing error check for rhashtable_insert_fast
i2c: xiic: Defer xiic_wakeup() and __xiic_start_xfer() in xiic_process()
i2c: xiic: Don't try to handle more interrupt events after error
extcon: usbc-tusb320: Convert to i2c's .probe_new()
btrfs: do not BUG_ON() on tree mod log failure at balance_level()
i2c: qup: Add missing unwind goto in qup_i2c_probe()
NFSD: add encoding of op_recall flag for write delegation
io_uring: wait interruptibly for request completions on exit
mmc: core: disable TRIM on Kingston EMMC04G-M627
mmc: core: disable TRIM on Micron MTFC4GACAJCN-1M
mmc: mmci: Set PROBE_PREFER_ASYNCHRONOUS
mmc: sdhci: fix DMA configure compatibility issue when 64bit DMA mode is used.
bcache: fixup btree_cache_wait list damage
bcache: Remove unnecessary NULL point check in node allocations
bcache: Fix __bch_btree_node_alloc to make the failure behavior consistent
um: Use HOST_DIR for mrproper
integrity: Fix possible multiple allocation in integrity_inode_get()
autofs: use flexible array in ioctl structure
shmem: use ramfs_kill_sb() for kill_sb method of ramfs-based tmpfs
ext4: Remove ext4 locking of moved directory
Revert "f2fs: fix potential corruption when moving a directory"
fs: Establish locking order for unrelated directories
fs: Lock moved directories
ipvs: increase ip_vs_conn_tab_bits range for 64BIT
jffs2: reduce stack usage in jffs2_build_xattr_subsystem()
fs: avoid empty option when generating legacy mount string
btrfs: add handling for RAID1C23/DUP to btrfs_reduce_alloc_profile
btrfs: delete unused BGs while reclaiming BGs
btrfs: bail out reclaim process if filesystem is read-only
btrfs: reinsert BGs failed to reclaim
btrfs: fix race when deleting quota root from the dirty cow roots list
btrfs: fix extent buffer leak after tree mod log failure at split_node()
btrfs: do not BUG_ON() on tree mod log failure at __btrfs_cow_block()
ASoC: mediatek: mt8173: Fix irq error path
ASoC: mediatek: mt8173: Fix snd_soc_component_initialize error path
ARM: dts: qcom: ipq4019: fix broken NAND controller properties override
ARM: orion5x: fix d2net gpio initialization
leds: trigger: netdev: Recheck NETDEV_LED_MODE_LINKUP on dev rename
fs: no need to check source
ovl: fix null pointer dereference in ovl_get_acl_rcu()
fanotify: disallow mount/sb marks on kernel internal pseudo fs
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
netfilter: conntrack: Avoid nf_ct_helper_hash uses after free
netfilter: nf_tables: do not ignore genmask when looking up chain by id
netfilter: nf_tables: prevent OOB access in nft_byteorder_eval
wireguard: queueing: use saner cpu selection wrapping
wireguard: netlink: send staged packets when setting initial private key
tty: serial: fsl_lpuart: add earlycon for imx8ulp platform
block/partition: fix signedness issue for Amiga partitions
io_uring: Use io_schedule* in cqring wait
io_uring: add reschedule point to handle_tw_list()
net: lan743x: Don't sleep in atomic context
workqueue: clean up WORK_* constant types, clarify masking
ksmbd: use ksmbd_req_buf_next() in ksmbd_smb2_check_message()
ksmbd: validate command payload size
ksmbd: fix out-of-bound read in smb2_write
ksmbd: validate session id and tree id in the compound request
drm/panel: simple: Add connector_type for innolux_at043tn24
drm/bridge: ti-sn65dsi86: Fix auxiliary bus lifetime
drm/panel: simple: Add Powertip PH800480T013 drm_display_mode flags
igc: Remove delay during TX ring configuration
net/mlx5e: fix double free in mlx5e_destroy_flow_table
net/mlx5e: fix memory leak in mlx5e_ptp_open
net/mlx5e: Check for NOT_READY flag state after locking
igc: set TP bit in 'supported' and 'advertising' fields of ethtool_link_ksettings
igc: Handle PPS start time programming for past time values
scsi: qla2xxx: Fix error code in qla2x00_start_sp()
bpf: Fix max stack depth check for async callbacks
net: mvneta: fix txq_map in case of txq_number==1
net/sched: cls_fw: Fix improper refcount update leads to use-after-free
gve: Set default duplex configuration to full
ionic: remove WARN_ON to prevent panic_on_warn
net: bgmac: postpone turning IRQs off to avoid SoC hangs
net: prevent skb corruption on frag list segmentation
icmp6: Fix null-ptr-deref of ip6_null_entry->rt6i_idev in icmp6_dev().
udp6: fix udp6_ehashfn() typo
ntb: idt: Fix error handling in idt_pci_driver_init()
NTB: amd: Fix error handling in amd_ntb_pci_driver_init()
ntb: intel: Fix error handling in intel_ntb_pci_driver_init()
NTB: ntb_transport: fix possible memory leak while device_register() fails
NTB: ntb_tool: Add check for devm_kcalloc
ipv6/addrconf: fix a potential refcount underflow for idev
platform/x86: wmi: remove unnecessary argument
platform/x86: wmi: use guid_t and guid_equal()
platform/x86: wmi: move variables
platform/x86: wmi: Break possible infinite loop when parsing GUID
kernel/trace: Fix cleanup logic of enable_trace_eprobe
igc: Fix launchtime before start of cycle
igc: Fix inserting of empty frame for launchtime
bpf, riscv: Support riscv jit to provide bpf_line_info
riscv, bpf: Fix inconsistent JIT image generation
drm/i915: Fix one wrong caching mode enum usage
octeontx2-pf: Add additional check for MCAM rules
erofs: avoid infinite loop in z_erofs_do_read_page() when reading beyond EOF
erofs: decouple basic mount options from fs_context
erofs: fix fsdax unavailability for chunk-based regular files
wifi: airo: avoid uninitialized warning in airo_get_rate()
bpf: cpumap: Fix memory leak in cpu_map_update_elem
net/sched: flower: Ensure both minimum and maximum ports are specified
riscv: mm: fix truncation warning on RV32
netdevsim: fix uninitialized data in nsim_dev_trap_fa_cookie_write()
net/sched: make psched_mtu() RTNL-less safe
net/sched: sch_qfq: refactor parsing of netlink parameters
net/sched: sch_qfq: account for stab overhead in qfq_enqueue
nvme-pci: remove nvme_queue from nvme_iod
nvme-pci: fix DMA direction of unmapping integrity data
fs/ntfs3: Check fields while reading
f2fs: fix to avoid NULL pointer dereference f2fs_write_end_io()
pinctrl: amd: Fix mistake in handling clearing pins at startup
pinctrl: amd: Detect internal GPIO0 debounce handling
pinctrl: amd: Detect and mask spurious interrupts
pinctrl: amd: Only use special debounce behavior for GPIO 0
tpm: tpm_vtpm_proxy: fix a race condition in /dev/vtpmx creation
mtd: rawnand: meson: fix unaligned DMA buffers handling
net: bcmgenet: Ensure MDIO unregistration has clocks enabled
mm/damon/ops-common: atomically test and clear young on ptes and pmds
powerpc: Fail build if using recordmcount with binutils v2.37
misc: fastrpc: Create fastrpc scalar with correct buffer count
powerpc/security: Fix Speculation_Store_Bypass reporting on Power10
arm64: errata: Add detection for TRBE overwrite in FILL mode
erofs: fix compact 4B support for 16k block size
MIPS: Loongson: Fix cpu_probe_loongson() again
MIPS: KVM: Fix NULL pointer dereference
ext4: Fix reusing stale buffer heads from last failed mounting
ext4: fix wrong unit use in ext4_mb_clear_bb
ext4: get block from bh in ext4_free_blocks for fast commit replay
ext4: fix wrong unit use in ext4_mb_new_blocks
ext4: fix to check return value of freeze_bdev() in ext4_shutdown()
ext4: turn quotas off if mount failed after enabling quotas
ext4: only update i_reserved_data_blocks on successful block allocation
jfs: jfs_dmap: Validate db_l2nbperpage while mounting
hwrng: imx-rngc - fix the timeout for init and self check
dm integrity: reduce vmalloc space footprint on 32-bit architectures
PCI/PM: Avoid putting EloPOS E2/S2/H2 PCIe Ports in D3cold
PCI: Add function 1 DMA alias quirk for Marvell 88SE9235
PCI: qcom: Disable write access to read only registers for IP v2.3.3
PCI: rockchip: Assert PCI Configuration Enable bit after probe
PCI: rockchip: Write PCI Device ID to correct register
PCI: rockchip: Add poll and timeout to wait for PHY PLLs to be locked
PCI: rockchip: Fix legacy IRQ generation for RK3399 PCIe endpoint core
PCI: rockchip: Use u32 variable to access 32-bit registers
PCI: rockchip: Set address alignment for endpoint mode
misc: pci_endpoint_test: Free IRQs before removing the device
misc: pci_endpoint_test: Re-init completion for every test
mfd: pm8008: Fix module autoloading
md/raid0: add discard support for the 'original' layout
dm init: add dm-mod.waitfor to wait for asynchronously probed block devices
fs: dlm: return positive pid value for F_GETLK
drm/atomic: Allow vblank-enabled + self-refresh "disable"
drm/rockchip: vop: Leave vblank enabled in self-refresh
drm/amdgpu: fix clearing mappings for BOs that are always valid in VM
drm/amd/display: Correct `DMUB_FW_VERSION` macro
drm/amdgpu: avoid restore process run into dead loop.
drm/ttm: Don't leak a resource on swapout move error
serial: atmel: don't enable IRQs prematurely
tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() in case of error
tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() when iterating clk
tty: serial: imx: fix rs485 rx after tx
firmware: stratix10-svc: Fix a potential resource leak in svc_create_memory_pool()
libceph: harden msgr2.1 frame segment length checks
ceph: don't let check_caps skip sending responses for revoke msgs
xhci: Fix resume issue of some ZHAOXIN hosts
xhci: Fix TRB prefetch issue of ZHAOXIN hosts
xhci: Show ZHAOXIN xHCI root hub speed correctly
meson saradc: fix clock divider mask length
opp: Fix use-after-free in lazy_opp_tables after probe deferral
soundwire: qcom: fix storing port config out-of-bounds
Revert "8250: add support for ASIX devices with a FIFO bug"
bus: ixp4xx: fix IXP4XX_EXP_T1_MASK
s390/decompressor: fix misaligned symbol build error
tracing/histograms: Add histograms to hist_vars if they have referenced variables
tracing: Fix memory leak of iter->temp when reading trace_pipe
samples: ftrace: Save required argument registers in sample trampolines
net: ena: fix shift-out-of-bounds in exponential backoff
ring-buffer: Fix deadloop issue on reading trace_pipe
ftrace: Fix possible warning on checking all pages used in ftrace_process_locs()
xtensa: ISS: fix call to split_if_spec
tracing: Fix null pointer dereference in tracing_err_log_open()
selftests: mptcp: sockopt: return error if wrong mark
selftests: mptcp: depend on SYN_COOKIES
tracing/probes: Fix not to count error code to total length
tracing/probes: Fix to update dynamic data counter if fetcharg uses it
scsi: qla2xxx: Wait for io return on terminate rport
scsi: qla2xxx: Array index may go out of bound
scsi: qla2xxx: Avoid fcport pointer dereference
scsi: qla2xxx: Fix buffer overrun
scsi: qla2xxx: Fix potential NULL pointer dereference
scsi: qla2xxx: Check valid rport returned by fc_bsg_to_rport()
scsi: qla2xxx: Correct the index of array
scsi: qla2xxx: Pointer may be dereferenced
scsi: qla2xxx: Remove unused nvme_ls_waitq wait queue
MIPS: kvm: Fix build error with KVM_MIPS_DEBUG_COP0_COUNTERS enabled
net/sched: sch_qfq: reintroduce lmax bound check for MTU
drm/atomic: Fix potential use-after-free in nonblocking commits
Linux 5.15.121
Note, this merges away commit
|
||
|
Sami Tolvanen
|
5c883c42bd |
kbuild: Disable GCOV for *.mod.o
[ Upstream commit |
||
|
Greg Kroah-Hartman
|
4204bfff97 |
Merge 5.15.66 into android14-5.15
Changes in 5.15.66 drm/msm/dsi: fix the inconsistent indenting drm/msm/dp: delete DP_RECOVERED_CLOCK_OUT_EN to fix tps4 drm/msm/dsi: Fix number of regulators for msm8996_dsi_cfg drm/msm/dsi: Fix number of regulators for SDM660 platform/x86: pmc_atom: Fix SLP_TYPx bitfield mask iio: adc: mcp3911: make use of the sign bit skmsg: Fix wrong last sg check in sk_msg_recvmsg() bpf: Restrict bpf_sys_bpf to CAP_PERFMON bpf, cgroup: Fix kernel BUG in purge_effective_progs ieee802154/adf7242: defer destroy_workqueue call drm/i915/backlight: extract backlight code to a separate file drm/i915/display: avoid warnings when registering dual panel backlight ALSA: hda: intel-nhlt: remove use of __func__ in dev_dbg ALSA: hda: intel-nhlt: Correct the handling of fmt_config flexible array wifi: cfg80211: debugfs: fix return type in ht40allow_map_read() Revert "xhci: turn off port power in shutdown" net: sparx5: fix handling uneven length packets in manual extraction net: smsc911x: Stop and start PHY during suspend and resume openvswitch: fix memory leak at failed datapath creation net: dsa: xrs700x: Use irqsave variant for u64 stats update net: sched: tbf: don't call qdisc_put() while holding tree lock net/sched: fix netdevice reference leaks in attach_default_qdiscs() ethernet: rocker: fix sleep in atomic context bug in neigh_timer_handler mlxbf_gige: compute MDIO period based on i1clk kcm: fix strp_init() order and cleanup sch_cake: Return __NET_XMIT_STOLEN when consuming enqueued skb tcp: annotate data-race around challenge_timestamp Revert "sch_cake: Return __NET_XMIT_STOLEN when consuming enqueued skb" net/smc: Remove redundant refcount increase soundwire: qcom: fix device status array range serial: fsl_lpuart: RS485 RTS polariy is inverse staging: rtl8712: fix use after free bugs staging: r8188eu: add firmware dependency powerpc: align syscall table for ppc32 vt: Clear selection before changing the font musb: fix USB_MUSB_TUSB6010 dependency tty: serial: lpuart: disable flow control while waiting for the transmit engine to complete Input: iforce - wake up after clearing IFORCE_XMIT_RUNNING flag iio: ad7292: Prevent regulator double disable iio: adc: mcp3911: use correct formula for AD conversion misc: fastrpc: fix memory corruption on probe misc: fastrpc: fix memory corruption on open USB: serial: ftdi_sio: add Omron CS1W-CIF31 device id mmc: core: Fix UHS-I SD 1.8V workaround branch mmc: core: Fix inconsistent sd3_bus_mode at UHS-I SD voltage switch failure binder: fix UAF of ref->proc caused by race condition binder: fix alloc->vma_vm_mm null-ptr dereference cifs: fix small mempool leak in SMB2_negotiate() KVM: VMX: Heed the 'msr' argument in msr_write_intercepted() drm/i915/reg: Fix spelling mistake "Unsupport" -> "Unsupported" clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate ops Revert "clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate ops" clk: core: Fix runtime PM sequence in clk_core_unprepare() Input: rk805-pwrkey - fix module autoloading clk: bcm: rpi: Fix error handling of raspberrypi_fw_get_rate clk: bcm: rpi: Use correct order for the parameters of devm_kcalloc() clk: bcm: rpi: Prevent out-of-bounds access clk: bcm: rpi: Add missing newline hwmon: (gpio-fan) Fix array out of bounds access gpio: pca953x: Add mutex_lock for regcache sync in PM KVM: x86: Mask off unsupported and unknown bits of IA32_ARCH_CAPABILITIES xen/grants: prevent integer overflow in gnttab_dma_alloc_pages() mm: pagewalk: Fix race between unmap and page walker xen-blkback: Advertise feature-persistent as user requested xen-blkfront: Advertise feature-persistent as user requested xen-blkfront: Cache feature_persistent value before advertisement thunderbolt: Use the actual buffer in tb_async_error() usb: dwc3: pci: Add support for Intel Raptor Lake media: mceusb: Use new usb_control_msg_*() routines xhci: Add grace period after xHC start to prevent premature runtime suspend. USB: serial: cp210x: add Decagon UCA device id USB: serial: option: add support for OPPO R11 diag port USB: serial: option: add Quectel EM060K modem USB: serial: option: add support for Cinterion MV32-WA/WB RmNet mode usb: typec: altmodes/displayport: correct pin assignment for UFP receptacles usb: typec: intel_pmc_mux: Add new ACPI ID for Meteor Lake IOM device usb: typec: tcpm: Return ENOTSUPP for power supply prop writes usb: dwc2: fix wrong order of phy_power_on and phy_init usb: cdns3: fix issue with rearming ISO OUT endpoint usb: cdns3: fix incorrect handling TRB_SMM flag for ISOC transfer USB: cdc-acm: Add Icom PMR F3400 support (0c26:0020) usb-storage: Add ignore-residue quirk for NXP PN7462AU s390/hugetlb: fix prepare_hugepage_range() check for 2 GB hugepages s390: fix nospec table alignments USB: core: Prevent nested device-reset calls usb: xhci-mtk: relax TT periodic bandwidth allocation usb: xhci-mtk: fix bandwidth release issue usb: gadget: mass_storage: Fix cdrom data transfers on MAC-OS driver core: Don't probe devices after bus_type.match() probe deferral wifi: mac80211: Don't finalize CSA in IBSS mode if state is disconnected wifi: mac80211: Fix UAF in ieee80211_scan_rx() ip: fix triggering of 'icmp redirect' net: Use u64_stats_fetch_begin_irq() for stats fetch. net: mac802154: Fix a condition in the receive path ALSA: hda/realtek: Add speaker AMP init for Samsung laptops with ALC298 ALSA: seq: oss: Fix data-race for max_midi_devs access ALSA: seq: Fix data-race at module auto-loading drm/i915/glk: ECS Liva Q2 needs GLK HDMI port timing quirk drm/i915: Skip wm/ddb readout for disabled pipes tty: n_gsm: add sanity check for gsm->receive in gsm_receive_buf() kbuild: Unify options for BTF generation for vmlinux and modules kbuild: Add skip_encoding_btf_enum64 option to pahole usb: dwc3: fix PHY disable sequence usb: dwc3: qcom: fix use-after-free on runtime-PM wakeup usb: dwc3: disable USB core PHY management USB: serial: ch341: fix lost character on LCR updates USB: serial: ch341: fix disabled rx timer on older devices Linux 5.15.66 Signed-off-by: Greg Kroah-Hartman <gregkh@google.com> Change-Id: I309eed59f20bde6cdb0b4debdb6a9c5909f620ee |
||
|
Jiri Olsa
|
0baced0e09 |
kbuild: Unify options for BTF generation for vmlinux and modules
commit
|
||
|
Yifan Hong
|
b7a492af2e |
ANDROID: Reland "Kbuild: Support KBUILD_MIXED_TREE in Makefile.modfinal"
This reverts commit
|
||
|
Sami Tolvanen
|
850ded46c6 |
kbuild: Fix TRIM_UNUSED_KSYMS with LTO_CLANG
With CONFIG_LTO_CLANG, we currently link modules into native code just before modpost, which means with TRIM_UNUSED_KSYMS enabled, we still look at the LLVM bitcode in the .o files when generating the list of used symbols. As the bitcode doesn't yet have calls to compiler intrinsics and llvm-nm doesn't see function references that only exist in function-level inline assembly, we currently need a whitelist for TRIM_UNUSED_KSYMS to work with LTO. This change moves module LTO linking to happen earlier, and thus avoids the issue with LLVM bitcode and TRIM_UNUSED_KSYMS entirely, allowing us to also drop the whitelist from gen_autoksyms.sh. Link: https://github.com/ClangBuiltLinux/linux/issues/1369 Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Alexander Lobakin <alobakin@pm.me> Tested-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
||
|
Linus Torvalds
|
81361b837a |
Merge tag 'kbuild-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Increase the -falign-functions alignment for the debug option.
- Remove ugly libelf checks from the top Makefile.
- Make the silent build (-s) more silent.
- Re-compile the kernel if KBUILD_BUILD_TIMESTAMP is specified.
- Various script cleanups
* tag 'kbuild-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (27 commits)
scripts: add generic syscallnr.sh
scripts: check duplicated syscall number in syscall table
sparc: syscalls: use pattern rules to generate syscall headers
parisc: syscalls: use pattern rules to generate syscall headers
nds32: add arch/nds32/boot/.gitignore
kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set
kbuild: modpost: Explicitly warn about unprototyped symbols
kbuild: remove trailing slashes from $(KBUILD_EXTMOD)
kconfig.h: explain IS_MODULE(), IS_ENABLED()
kconfig: constify long_opts
scripts/setlocalversion: simplify the short version part
scripts/setlocalversion: factor out 12-chars hash construction
scripts/setlocalversion: add more comments to -dirty flag detection
scripts/setlocalversion: remove workaround for old make-kpkg
scripts/setlocalversion: remove mercurial, svn and git-svn supports
kbuild: clean up ${quiet} checks in shell scripts
kbuild: sink stdout from cmd for silent build
init: use $(call cmd,) for generating include/generated/compile.h
kbuild: merge scripts/mkmakefile to top Makefile
sh: move core-y in arch/sh/Makefile to arch/sh/Kbuild
...
|
||
|
Javier Martinez Canillas
|
ff2e6efda0 |
kbuild: Quote OBJCOPY var to avoid a pahole call break the build
The ccache tool can be used to speed up cross-compilation, by calling the
compiler and binutils through ccache. For example, following should work:
$ export ARCH=arm64 CROSS_COMPILE="ccache aarch64-linux-gnu-"
$ make M=drivers/gpu/drm/rockchip/
but pahole fails to extract the BTF info from DWARF, breaking the build:
CC [M] drivers/gpu/drm/rockchip//rockchipdrm.mod.o
LD [M] drivers/gpu/drm/rockchip//rockchipdrm.ko
BTF [M] drivers/gpu/drm/rockchip//rockchipdrm.ko
aarch64-linux-gnu-objcopy: invalid option -- 'J'
Usage: aarch64-linux-gnu-objcopy [option(s)] in-file [out-file]
Copies a binary file, possibly transforming it in the process
...
make[1]: *** [scripts/Makefile.modpost:156: __modpost] Error 2
make: *** [Makefile:1866: modules] Error 2
this fails because OBJCOPY is set to "ccache aarch64-linux-gnu-copy" and
later pahole is executed with the following command line:
LLVM_OBJCOPY=$(OBJCOPY) $(PAHOLE) -J --btf_base vmlinux $@
which gets expanded to:
LLVM_OBJCOPY=ccache aarch64-linux-gnu-objcopy pahole -J ...
instead of:
LLVM_OBJCOPY="ccache aarch64-linux-gnu-objcopy" pahole -J ...
Fixes:
|
||
|
Masahiro Yamada
|
0d989ac2c9 |
kbuild: remove libelf checks from top Makefile
I do not see a good reason why only the libelf development package must
be so carefully checked.
Kbuild generally does not check host tools or libraries.
For example, x86_64 defconfig fails to build with no libssl development
package installed.
scripts/extract-cert.c:21:10: fatal error: openssl/bio.h: No such file or directory
21 | #include <openssl/bio.h>
| ^~~~~~~~~~~~~~~
To solve the build error, you need to install libssl-dev or openssl-devel
package, depending on your distribution.
'apt-file search', 'dnf provides', etc. is your frined to find a proper
package to install.
This commit removes all the libelf checks from the top Makefile.
If libelf is missing, objtool will fail to build in a similar pattern:
.../linux/tools/objtool/include/objtool/elf.h:10:10: fatal error: gelf.h: No such file or directory
10 | #include <gelf.h>
You need to install libelf-dev, libelf-devel, or elfutils-libelf-devel
to proceed.
Another remarkable change is, CONFIG_STACK_VALIDATION (without
CONFIG_UNWINDER_ORC) previously continued to build with a warning,
but now it will treat missing libelf as an error.
This is just a one-time installation, so it should not hurt to break
a build and make a user install the package.
BTW, the traditional way to handle such checks is autotool, but according
to [1], I do not expect the kernel build would have similar scripting
like './configure' does.
[1]: https://lore.kernel.org/lkml/CA+55aFzr2HTZVOuzpHYDwmtRJLsVzE-yqg2DHpHi_9ePsYp5ug@mail.gmail.com/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
|
||
|
Sami Tolvanen
|
cf68fffb66 |
add support for Clang CFI
This change adds support for Clang’s forward-edge Control Flow Integrity (CFI) checking. With CONFIG_CFI_CLANG, the compiler injects a runtime check before each indirect function call to ensure the target is a valid function with the correct static type. This restricts possible call targets and makes it more difficult for an attacker to exploit bugs that allow the modification of stored function pointers. For more details, see: https://clang.llvm.org/docs/ControlFlowIntegrity.html Clang requires CONFIG_LTO_CLANG to be enabled with CFI to gain visibility to possible call targets. Kernel modules are supported with Clang’s cross-DSO CFI mode, which allows checking between independently compiled components. With CFI enabled, the compiler injects a __cfi_check() function into the kernel and each module for validating local call targets. For cross-module calls that cannot be validated locally, the compiler calls the global __cfi_slowpath_diag() function, which determines the target module and calls the correct __cfi_check() function. This patch includes a slowpath implementation that uses __module_address() to resolve call targets, and with CONFIG_CFI_CLANG_SHADOW enabled, a shadow map that speeds up module look-ups by ~3x. Clang implements indirect call checking using jump tables and offers two methods of generating them. With canonical jump tables, the compiler renames each address-taken function to <function>.cfi and points the original symbol to a jump table entry, which passes __cfi_check() validation. This isn’t compatible with stand-alone assembly code, which the compiler doesn’t instrument, and would result in indirect calls to assembly code to fail. Therefore, we default to using non-canonical jump tables instead, where the compiler generates a local jump table entry <function>.cfi_jt for each address-taken function, and replaces all references to the function with the address of the jump table entry. Note that because non-canonical jump table addresses are local to each component, they break cross-module function address equality. Specifically, the address of a global function will be different in each module, as it's replaced with the address of a local jump table entry. If this address is passed to a different module, it won’t match the address of the same function taken there. This may break code that relies on comparing addresses passed from other components. CFI checking can be disabled in a function with the __nocfi attribute. Additionally, CFI can be disabled for an entire compilation unit by filtering out CC_FLAGS_CFI. By default, CFI failures result in a kernel panic to stop a potential exploit. CONFIG_CFI_PERMISSIVE enables a permissive mode, where the kernel prints out a rate-limited warning instead, and allows execution to continue. This option is helpful for locating type mismatches, but should only be enabled during development. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Tested-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20210408182843.1754385-2-samitolvanen@google.com |
||
|
Sami Tolvanen
|
b1a1a1a09b |
kbuild: lto: postpone objtool
With LTO, LLVM bitcode won't be compiled into native code until modpost_link, or modfinal for modules. This change postpones calls to objtool until after these steps, and moves objtool_args to Makefile.lib, so the arguments can be reused in Makefile.modfinal. As we didn't have objects to process earlier, we use --duplicate when processing vmlinux.o. This change also disables unreachable instruction warnings with LTO to avoid warnings about the int3 padding between functions. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> |
||
|
Sami Tolvanen
|
dc5723b02e |
kbuild: add support for Clang LTO
This change adds build system support for Clang's Link Time Optimization (LTO). With -flto, instead of ELF object files, Clang produces LLVM bitcode, which is compiled into native code at link time, allowing the final binary to be optimized globally. For more details, see: https://llvm.org/docs/LinkTimeOptimization.html The Kconfig option CONFIG_LTO_CLANG is implemented as a choice, which defaults to LTO being disabled. To use LTO, the architecture must select ARCH_SUPPORTS_LTO_CLANG and support: - compiling with Clang, - compiling all assembly code with Clang's integrated assembler, - and linking with LLD. While using CONFIG_LTO_CLANG_FULL results in the best runtime performance, the compilation is not scalable in time or memory. CONFIG_LTO_CLANG_THIN enables ThinLTO, which allows parallel optimization and faster incremental builds. ThinLTO is used by default if the architecture also selects ARCH_SUPPORTS_LTO_CLANG_THIN: https://clang.llvm.org/docs/ThinLTO.html To enable LTO, LLVM tools must be used to handle bitcode files, by passing LLVM=1 and LLVM_IAS=1 options to make: $ make LLVM=1 LLVM_IAS=1 defconfig $ scripts/config -e LTO_CLANG_THIN $ make LLVM=1 LLVM_IAS=1 To prepare for LTO support with other compilers, common parts are gated behind the CONFIG_LTO option, and LTO can be disabled for specific files by filtering out CC_FLAGS_LTO. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20201211184633.3213045-3-samitolvanen@google.com |
||
|
Andrii Nakryiko
|
e732b538f4 |
kbuild: Skip module BTF generation for out-of-tree external modules
In some modes of operation, Kbuild allows to build modules without having
vmlinux image around. In such case, generation of module BTF is impossible.
This patch changes the behavior to emit a warning about impossibility of
generating kernel module BTF, instead of breaking the build. This is especially
important for out-of-tree external module builds.
In vmlinux-less mode:
$ make clean
$ make modules_prepare
$ touch drivers/acpi/button.c
$ make M=drivers/acpi
...
CC [M] drivers/acpi/button.o
MODPOST drivers/acpi/Module.symvers
LD [M] drivers/acpi/button.ko
BTF [M] drivers/acpi/button.ko
Skipping BTF generation for drivers/acpi/button.ko due to unavailability of vmlinux
...
$ readelf -S ~/linux-build/default/drivers/acpi/button.ko | grep BTF -A1
... empty ...
Now with normal build:
$ make all
...
LD [M] drivers/acpi/button.ko
BTF [M] drivers/acpi/button.ko
...
$ readelf -S ~/linux-build/default/drivers/acpi/button.ko | grep BTF -A1
[60] .BTF PROGBITS 0000000000000000 00029310
000000000000ab3f 0000000000000000 0 0 1
Fixes:
|
||
|
Andrii Nakryiko
|
5f9ae91f7c |
kbuild: Build kernel module BTFs if BTF is enabled and pahole supports it
Detect if pahole supports split BTF generation, and generate BTF for each
selected kernel module, if it does. This is exposed to Makefiles and C code as
CONFIG_DEBUG_INFO_BTF_MODULES flag.
Kernel module BTF has to be re-generated if either vmlinux's BTF changes or
module's .ko changes. To achieve that, I needed a helper similar to
if_changed, but that would allow to filter out vmlinux from the list of
updated dependencies for .ko building. I've put it next to the only place that
uses and needs it, but it might be a better idea to just add it along the
other if_changed variants into scripts/Kbuild.include.
Each kernel module's BTF deduplication is pretty fast, as it does only
incremental BTF deduplication on top of already deduplicated vmlinux BTF. To
show the added build time, I've first ran make only just built kernel (to
establish the baseline) and then forced only BTF re-generation, without
regenerating .ko files. The build was performed with -j60 parallelization on
56-core machine. The final time also includes bzImage building, so it's not
a pure BTF overhead.
$ time make -j60
...
make -j60 27.65s user 10.96s system 782% cpu 4.933 total
$ touch ~/linux-build/default/vmlinux && time make -j60
...
make -j60 123.69s user 27.85s system 1566% cpu 9.675 total
So 4.6 seconds real time, with noticeable part spent in compressed vmlinux and
bzImage building.
To show size savings, I've built my kernel configuration with about 700 kernel
modules with full BTF per each kernel module (without deduplicating against
vmlinux) and with split BTF against deduplicated vmlinux (approach in this
patch). Below are top 10 modules with biggest BTF sizes. And total size of BTF
data across all kernel modules.
It shows that split BTF "compresses" 115MB down to 5MB total. And the biggest
kernel modules get a downsize from 500-570KB down to 200-300KB.
FULL BTF
========
$ for f in $(find . -name '*.ko'); do size -A -d $f | grep BTF | awk '{print $2}'; done | awk '{ s += $1 } END { print s }'
115710691
$ for f in $(find . -name '*.ko'); do printf "%s %d\n" $f $(size -A -d $f | grep BTF | awk '{print $2}'); done | sort -nr -k2 | head -n10
./drivers/gpu/drm/i915/i915.ko 570570
./drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.ko 520240
./drivers/gpu/drm/radeon/radeon.ko 503849
./drivers/infiniband/hw/mlx5/mlx5_ib.ko 491777
./fs/xfs/xfs.ko 411544
./drivers/net/ethernet/intel/i40e/i40e.ko 403904
./drivers/net/ethernet/broadcom/bnx2x/bnx2x.ko 398754
./drivers/infiniband/core/ib_core.ko 397224
./fs/cifs/cifs.ko 386249
./fs/nfsd/nfsd.ko 379738
SPLIT BTF
=========
$ for f in $(find . -name '*.ko'); do size -A -d $f | grep BTF | awk '{print $2}'; done | awk '{ s += $1 } END { print s }'
5194047
$ for f in $(find . -name '*.ko'); do printf "%s %d\n" $f $(size -A -d $f | grep BTF | awk '{print $2}'); done | sort -nr -k2 | head -n10
./drivers/gpu/drm/i915/i915.ko 293206
./drivers/gpu/drm/radeon/radeon.ko 282103
./fs/xfs/xfs.ko 222150
./drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.ko 198503
./drivers/infiniband/hw/mlx5/mlx5_ib.ko 198356
./drivers/net/ethernet/broadcom/bnx2x/bnx2x.ko 113444
./fs/cifs/cifs.ko 109379
./arch/x86/kvm/kvm.ko 100225
./drivers/gpu/drm/drm.ko 94827
./drivers/infiniband/core/ib_core.ko 91188
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201110011932.3201430-4-andrii@kernel.org
|
||
|
Masahiro Yamada
|
596b0474d3 |
kbuild: preprocess module linker script
There was a request to preprocess the module linker script like we do for the vmlinux one. (https://lkml.org/lkml/2020/8/21/512) The difference between vmlinux.lds and module.lds is that the latter is needed for external module builds, thus must be cleaned up by 'make mrproper' instead of 'make clean'. Also, it must be created by 'make modules_prepare'. You cannot put it in arch/$(SRCARCH)/kernel/, which is cleaned up by 'make clean'. I moved arch/$(SRCARCH)/kernel/module.lds to arch/$(SRCARCH)/include/asm/module.lds.h, which is included from scripts/module.lds.S. scripts/module.lds is fine because 'make clean' keeps all the build artifacts under scripts/. You can add arch-specific sections in <asm/module.lds.h>. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Jessica Yu <jeyu@kernel.org> Acked-by: Will Deacon <will@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Jessica Yu <jeyu@kernel.org> |
||
|
Masahiro Yamada
|
eb27ea5ce7 |
kbuild: move modkern_{c,a}flags to Makefile.lib from Makefile.build
Makefile.lib is included by Makefile.modfinal as well as Makefile.build. Move modkern_cflags to Makefile.lib in order to simplify cmd_cc_o_c in Makefile.modfinal. Move modkern_cflags as well for consistency. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> |
||
|
Masahiro Yamada
|
9b9a3f20cb |
kbuild: split final module linking out into Makefile.modfinal
I think splitting the modpost and linking modules into separate Makefiles will be useful especially when more complex build steps come in. The main motivation of this commit is to integrate the proposed klp-convert feature cleanly. I moved the logging 'Building modules, stage 2.' to Makefile.modpost to avoid the code duplication although I do not know whether or not this message is needed in the first place. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> |