commit b9275eabe31e6679ae12c46a4a0a18d622db4570 upstream.
At the end of a 128b/132b link training sequence, the HW expects the
transcoder training pattern to be set to TPS2 and from that to normal
mode (disabling the training pattern). Transitioning from TPS1 directly
to normal mode leaves the transcoder in a stuck state, resulting in
page-flip timeouts later in the modeset sequence.
Atm, in case of a failure during link training, the transcoder may be
still set to output the TPS1 pattern. Later the transcoder is then set
from TPS1 directly to normal mode in intel_dp_stop_link_train(), leading
to modeset failures later as described above. Fix this by setting the
training patter to TPS2, if the link training failed at any point.
The clue in the specification about the above HW behavior is the
explicit mention that TPS2 must be set after the link training sequence
(and there isn't a similar requirement specified for the 8b/10b link
training), see the Bspec links below.
v2: Add bspec aspect/link to the commit log. (Jani)
Bspec: 54128, 65448, 68849
Cc: stable@vger.kernel.org # v5.18+
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217223828.1166093-2-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 8b4bbaf8ddc1f68f3ee96a706f65fdb1bcd9d355)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 07fb70d82e0df085980246bf17bc12537588795f upstream.
Any active plane needs to have its crtc included in the atomic
state. For planes enabled via uapi that is all handler in the core.
But when we use a plane for joiner the uapi code things the plane
is disabled and therefore doesn't have a crtc. So we need to pull
those in by hand. We do it first thing in
intel_joiner_add_affected_crtcs() so that any newly added crtc will
subsequently pull in all of its joined crtcs as well.
The symptoms from failing to do this are:
- duct tape in the form of commit 1d5b09f8da ("drm/i915: Fix NULL
ptr deref by checking new_crtc_state")
- the plane's hw state will get overwritten by the disabled
uapi state if it can't find the uapi counterpart plane in
the atomic state from where it should copy the correct state
Cc: stable@vger.kernel.org
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212164330.16891-2-ville.syrjala@linux.intel.com
(cherry picked from commit 91077d1deb5374eb8be00fb391710f00e751dc4b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b3fefbb30a1691533cb905006b69b2a474660744 ]
In case we have to retry the loop, we are missing to unlock+put the
folio. In that case, we will keep failing make_device_exclusive_range()
because we cannot grab the folio lock, and even return from the function
with the folio locked and referenced, effectively never succeeding the
make_device_exclusive_range().
While at it, convert the other unlock+put to use a folio as well.
This was found by code inspection.
Fixes: 8f187163eb ("nouveau/svm: implement atomic SVM access")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Tested-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250124181524.3584236-2-david@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a47f4b439beb98e955d501c609dfd12b7836d61 ]
The "submit->cmd[i].size" and "submit->cmd[i].offset" variables are u32
values that come from the user via the submit_lookup_cmds() function.
This addition could lead to an integer wrapping bug so use size_add()
to prevent that.
Fixes: 198725337e ("drm/msm: fix cmdstream size check")
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/624696/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2acb89af1a400be721bcb14f137aa22b509caba ]
Error messages resulting from incorrect usage of the kernel uabi should
not spam dmesg by default. But it is useful to enable them to debug
userspace. So demote to DRM_UT_DRIVER.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/564189/
Stable-dep-of: 3a47f4b439be ("drm/msm/gem: prevent integer overflow in msm_ioctl_gem_submit()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5559598742fb4538e4c51c48ef70563c49c2af23 upstream.
[WHAT & HOW]
"dcn20_validate_apply_pipe_split_flags" dereferences merge, and thus it
cannot be a null pointer. Let's pass a valid pointer to avoid null
dereference.
This fixes 2 FORWARD_NULL issues reported by Coverity.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Jerry Zuo <jerry.zuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[ dcn20 and dcn21 were moved from drivers/gpu/drm/amd/display/dc to
drivers/gpu/drm/amd/display/dc/resource since commit
8b8eed05a1c6 ("drm/amd/display: Refactor resource into component directory").
The path is changed accordingly to apply the patch on 6.6.y. ]
Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f22f4754aaa47d8c59f166ba3042182859e5dff7 upstream.
This commit addresses a potential null pointer dereference issue in the
`dcn201_acquire_free_pipe_for_layer` function. The issue could occur
when `head_pipe` is null.
The fix adds a check to ensure `head_pipe` is not null before asserting
it. If `head_pipe` is null, the function returns NULL to prevent a
potential null pointer dereference.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn201/dcn201_resource.c:1016 dcn201_acquire_free_pipe_for_layer() error: we previously assumed 'head_pipe' could be null (see line 1010)
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[ dcn201 was moved from drivers/gpu/drm/amd/display/dc to
drivers/gpu/drm/amd/display/dc/resource since commit
8b8eed05a1c6 ("drm/amd/display: Refactor resource into component directory").
The path is changed accordingly to apply the patch on 6.6.y. ]
Signed-off-by: Xiangyu Chen <xiangyu.chen@windriver.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 21f1435b1e6b012a07c42f36b206d2b66fc8f13b upstream.
If the active performance monitor (`v3d->active_perfmon`) is being
destroyed, stop it first. Currently, the active perfmon is not
stopped during destruction, leaving the `v3d->active_perfmon` pointer
stale. This can lead to undefined behavior and instability.
This patch ensures that the active perfmon is stopped before being
destroyed, aligning with the behavior introduced in commit
7d1fd3638ee3 ("drm/v3d: Stop the active perfmon before being destroyed").
Cc: stable@vger.kernel.org # v5.15+
Fixes: 26a4dc29b7 ("drm/v3d: Expose performance counters to userspace")
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241118221948.1758130-1-christian.gmeiner@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 44b6730ab53ef04944fbaf6da0e77397531517b7 upstream.
It has been observed that sometimes DSS will trigger an interrupt and
the top level interrupt (DISPC_IRQSTATUS) is not zero, but the VP and
VID level interrupt-statuses are zero.
As the top level irqstatus is supposed to tell whether we have VP/VID
interrupts, the thinking of the driver authors was that this particular
case could never happen. Thus the driver only clears the DISPC_IRQSTATUS
bits which has corresponding interrupts in VP/VID status. So when this
issue happens, the driver will not clear DISPC_IRQSTATUS, and we get an
interrupt flood.
It is unclear why the issue happens. It could be a race issue in the
driver, but no such race has been found. It could also be an issue with
the HW. However a similar case can be easily triggered by manually
writing to DISPC_IRQSTATUS_RAW. This will forcibly set a bit in the
DISPC_IRQSTATUS and trigger an interrupt, and as the driver never clears
the bit, we get an interrupt flood.
To fix the issue, always clear DISPC_IRQSTATUS. The concern with this
solution is that if the top level irqstatus is the one that triggers the
interrupt, always clearing DISPC_IRQSTATUS might leave some interrupts
unhandled if VP/VID interrupt statuses have bits set. However, testing
shows that if any of the irqstatuses is set (i.e. even if
DISPC_IRQSTATUS == 0, but a VID irqstatus has a bit set), we will get an
interrupt.
Co-developed-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Co-developed-by: Devarsh Thakkar <devarsht@ti.com>
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Co-developed-by: Jonathan Cormier <jcormier@criticallink.com>
Signed-off-by: Jonathan Cormier <jcormier@criticallink.com>
Fixes: 32a1795f57 ("drm/tidss: New driver for TI Keystone platform Display SubSystem")
Cc: stable@vger.kernel.org
Tested-by: Jonathan Cormier <jcormier@criticallink.com>
Reviewed-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241021-tidss-irq-fix-v1-1-82ddaec94e4a@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a0a455b4bc7483ad60e8b8a50330c1e05bb7bfcf ]
In function psp_init_cap_microcode(), it should bail out when failed to
load firmware, otherwise it may cause invalid memory access.
Fixes: 07dbfc6b10 ("drm/amd: Use `amdgpu_ucode_*` helpers for PSP")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c7b49506b3ba7a62335e6f666a43f67d5cd9fd1e upstream.
I'm seeing underruns with these 64bpp YUV formats on TGL.
The weird details:
- only happens on pipe B/C/D SDR planes, pipe A SDR planes
seem fine, as do all HDR planes
- somehow CDCLK related, higher CDCLK allows for bigger plane
with these formats without underruns. With 300MHz CDCLK I
can only go up to 1200 pixels wide or so, with 650MHz even
a 3840 pixel wide plane was OK
- ICL and ADL so far appear unaffected
So not really sure what's the deal with this, but bspec does
state "64-bit formats supported only on the HDR planes" so
let's just drop these formats from the SDR planes. We already
disallow 64bpp RGB formats.
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241218173650.19782-2-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
(cherry picked from commit 35e1aacfe536d6e8d8d440cd7155366da2541ad4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f245b400a223a71d6d5f4c72a2cb9b573a7fc2b6 upstream.
This reverts commit
a2b5a9956269 ("drm/amd/display: Use HW lock mgr for PSR1")
Because it may cause system hang while connect with two edp panel.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9078a5bfa21e78ae68b6d7c365d1b92f26720c55 upstream.
The following page fault was observed duringthe KFD process release.
In this particular error case, the HIP test (./MemcpyPerformance -h)
does not require the queue. As a result, the process_context_addr was
not assigned when the KFD process was released, ultimately leading to
this page fault during the execution of the function
kfd_process_dequeue_from_all_devices().
[345962.294891] amdgpu 0000:03:00.0: amdgpu: [gfxhub] page fault (src_id:0 ring:153 vmid:0 pasid:0)
[345962.295333] amdgpu 0000:03:00.0: amdgpu: in page starting at address 0x0000000000000000 from client 10
[345962.295775] amdgpu 0000:03:00.0: amdgpu: GCVM_L2_PROTECTION_FAULT_STATUS:0x00000B33
[345962.296097] amdgpu 0000:03:00.0: amdgpu: Faulty UTCL2 client ID: CPC (0x5)
[345962.296394] amdgpu 0000:03:00.0: amdgpu: MORE_FAULTS: 0x1
[345962.296633] amdgpu 0000:03:00.0: amdgpu: WALKER_ERROR: 0x1
[345962.296876] amdgpu 0000:03:00.0: amdgpu: PERMISSION_FAULTS: 0x3
[345962.297135] amdgpu 0000:03:00.0: amdgpu: MAPPING_ERROR: 0x1
[345962.297377] amdgpu 0000:03:00.0: amdgpu: RW: 0x0
[345962.297682] amdgpu 0000:03:00.0: amdgpu: [gfxhub] page fault (src_id:0 ring:169 vmid:0 pasid:0)
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6daaae5ff7f3b23a2dacc9c387ff3d4f95b67cad ]
If the hotplug detect of a display is low for longer than one second
(configurable through drm_dp_cec_unregister_delay), then the CEC adapter
is unregistered since we assume the display was disconnected. If the
HPD went low for less than one second, then we check if the properties
of the CEC adapter have changed, since that indicates that we actually
switch to new hardware and we have to unregister the old CEC device and
register a new one.
Unfortunately, the test for changed properties was written poorly, and
after a new CEC capability was added to the CEC core code the test always
returned true (i.e. the properties had changed).
As a result the CEC device was unregistered and re-registered for every
HPD toggle. If the CEC remote controller integration was also enabled
(CONFIG_MEDIA_CEC_RC was set), then the corresponding input device was
also unregistered and re-registered. As a result the input device in
/sys would keep incrementing its number, e.g.:
/sys/devices/pci0000:00/0000:00:08.1/0000:e7:00.0/rc/rc0/input20
Since short HPD toggles are common, the number could over time get into
the thousands.
While not a serious issue (i.e. nothing crashes), it is not intended
to work that way.
This patch changes the test so that it only checks for the single CEC
capability that can actually change, and it ignores any other
capabilities, so this is now safe as well if new caps are added in
the future.
With the changed test the bit under #ifndef CONFIG_MEDIA_CEC_RC can be
dropped as well, so that's a nice cleanup.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reported-by: Farblos <farblos@vodafonemail.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 2c6d1fffa1 ("drm: add support for DisplayPort CEC-Tunneling-over-AUX")
Tested-by: Farblos <farblos@vodafonemail.de>
Link: https://patchwork.freedesktop.org/patch/msgid/361bb03d-1691-4e23-84da-0861ead5dbdc@xs4all.nl
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e56ad45e991128bf4db160b75a1d9f647a341d8f ]
Source --> DP2.1 MST hub --> DP1.4/2.1 monitor
When change from DP1.4 to DP2.1 from monitor manual, modes higher than
4k120 are all cutoff by mode validation. Switch back to DP1.4 gets all
the modes up to 4k240 available to be enabled by dsc passthrough.
[why]
Compared to DP1.4 link from hub to monitor, DP2.1 link has larger
full_pbn value that causes overflow in the process of doing conversion
from pbn to kbps.
[how]
Change the data type accordingly to fit into the data limit during
conversion calculation.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df7c8e3dde37a9d81c0613285b43600f3cc70f34 ]
The connector->eld is accessed by the .get_eld() callback. This access
can collide with the drm_edid_to_eld() updating the data at the same
time. Add drm_connector.eld_mutex to protect the data from concurrenct
access. Individual drivers are not updated (to reduce possible issues
while applying the patch), maintainers are to find a best suitable way
to lock that mutex while accessing the ELD data.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20241206-drm-connector-eld-mutex-v2-1-c9bce1ee8bea@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3c55b8ab6fe5fa2e7ab02efd36d09c39ee5022f ]
Having a fence linked to a virtio_gpu_framebuffer in the plane update
sequence would cause conflict when several planes referencing the same
framebuffer (e.g. Xorg screen covering multi-displays configured for an
extended mode) and those planes are updated concurrently. So it is needed
to allocate a fence for every plane state instead of the framebuffer.
Signed-off-by: Dongwon Kim <dongwon.kim@intel.com>
[dmitry.osipenko@collabora.com: rebase, fix up, edit commit message]
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Acked-by: Vivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241020230803.247419-2-dmitry.osipenko@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
