use a window based view of time in order to track task
demand and CPU utilization in the scheduler.
Window Assisted Load Tracking (WALT) implementation credits:
Srivatsa Vaddagiri, Steve Muckle, Syed Rameez Mustafa, Joonwoo Park,
Pavan Kumar Kondeti, Olav Haugan
2016-03-06: Integration with EAS/refactoring by Vikram Mulukutla
and Todd Kjos
Change-Id: I21408236836625d4e7d7de1843d20ed5ff36c708
Includes fixes for issues:
eas/walt: Use walt_ktime_clock() instead of ktime_get_ns() to avoid a
race resulting in watchdog resets
BUG: 29353986
Change-Id: Ic1820e22a136f7c7ebd6f42e15f14d470f6bbbdb
Handle walt accounting anomoly during resume
During resume, there is a corner case where on wakeup, a task's
prev_runnable_sum can go negative. This is a workaround that
fixes the condition and warns (instead of crashing).
BUG: 29464099
Change-Id: I173e7874324b31a3584435530281708145773508
Signed-off-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Srinath Sridharan <srinathsr@google.com>
Signed-off-by: Juri Lelli <juri.lelli@arm.com>
[jstultz: fwdported to 4.4]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Andres Oportus <andresoportus@google.com>
Change-Id: I164ee04ba98c3a776605f18cb65ee61b3e917939
Contains also:
eas/stune: schedtune cpu boost_max must be non-negative.
This is to avoid under-accounting cpu capacity which may
cause task stacking and frequency spikes.
Change-Id: Ie1c1cbd52a6edb77b4c15a830030aa748dff6f29
Signed-off-by: Andres Oportus <andresoportus@google.com>
Currently the build for a single-core (e.g. user-mode) Linux is broken
and this configuration is required (at least) to run some network tests.
The main issues for the current code support on single-core systems are:
1. {se,rq}::sched_avg is not available nor maintained for !SMP systems
This means that load and utilisation signals are NOT available in single
core systems. All the EAS code depends on these signals.
2. sched_group_energy is also SMP dependant. Again this means that all the
EAS setup and preparation code (energyn model initialization) has to be
properly guarded/disabled for !SMP systems.
3. SchedFreq depends on utilization signal, which is not available on
!SMP systems.
4. SchedTune is useless on unicore systems if SchedFreq is not available.
5. WALT machinery is not required on single-core systems.
This patch addresses all these issues by enforcing some constraints for
single-core systems:
a) WALT, SchedTune and SchedTune are now dependant on SMP
b) The default governor for !SMP systems is INTERACTIVE
c) The energy model initialisation/build functions are
d) Other minor code re-arrangements and CONFIG_SMP guarding to enable
single core builds.
Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com>
Signed-off-by: Andres Oportus <andresoportus@google.com>
This is useful when we want to compare cpu utilization and
cpu curr capacity side by side.
Signed-off-by: Juri Lelli <juri.lelli@arm.com>
Signed-off-by: Andres Oportus <andresoportus@google.com>
We want to use network trace events in production
builds, to help diagnose Wifi problems. However, we
don't want to expose raw kernel pointers in such
builds.
Change the format specifier for the skbaddr field,
so that, if kptr_restrict is enabled, the pointers
will be reported as 0.
Bug: 30090733
Change-Id: Ic4bd583d37af6637343601feca875ee24479ddff
Signed-off-by: mukesh agrawal <quiche@google.com>
Adds tracepoints in ext4/f2fs/mpage to track readpages/buffered
write()s. This allows us to track files that are being read/written
to PIDs. (Merged from android4.4-common).
Signed-off-by: Mohan Srinivasan <srmohan@google.com>
Adds a new trace event to be called from clk_set_parent. Some
cpufreq drivers, including Tegra, reparent the cpu clock to a
slower clock while the main pll is relocking, tracing
clk_set_parent allows traces to show how for long the cpu is
running slower.
Uses a separate TRACE_EVENT instead of the clock event class to
allow the event to contain string names for the child and the
parent.
Signed-off-by: Colin Cross <ccross@android.com>
This change fixes the how the gpu_sched_switch timestamp field is formatted.
Signed-off-by: Jamie Gennis <jgennis@google.com>
Change-Id: I273234935254ed15772c9e561c9af20e480004ae
Decare war on uninterruptible sleep. Add a tracepoint which
walks the kernel stack and dumps the first non-scheduler function
called before the scheduler is invoked.
Change-Id: I19e965d5206329360a92cbfe2afcc8c30f65c229
Signed-off-by: Riley Andrews <riandrews@google.com>
Pull cgroup updates from Tejun Heo:
- tracepoints for basic cgroup management operations added
- kernfs and cgroup path formatting functions updated to behave in the
style of strlcpy()
- non-critical bug fixes
* 'for-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
blkcg: Unlock blkcg_pol_mutex only once when cpd == NULL
cgroup: fix error handling regressions in proc_cgroup_show() and cgroup_release_agent()
cpuset: fix error handling regression in proc_cpuset_show()
cgroup: add tracepoints for basic operations
cgroup: make cgroup_path() and friends behave in the style of strlcpy()
kernfs: remove kernfs_path_len()
kernfs: make kernfs_path*() behave in the style of strlcpy()
kernfs: add dummy implementation of kernfs_path_from_node()
COMPACT_PARTIAL has historically meant that compaction returned after
doing some work without fully compacting a zone. It however didn't
distinguish if compaction terminated because it succeeded in creating
the requested high-order page. This has changed recently and now we
only return COMPACT_PARTIAL when compaction thinks it succeeded, or the
high-order watermark check in compaction_suitable() passes and no
compaction needs to be done.
So at this point we can make the return value clearer by renaming it to
COMPACT_SUCCESS. The next patch will remove some redundant tests for
success where compaction just returned COMPACT_SUCCESS.
Link: http://lkml.kernel.org/r/20160810091226.6709-4-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull HID updates from Jiri Kosina:
- Integrated Sensor Hub support (Cherrytrail+) from Srinivas Pandruvada
- Big cleanup of Wacom driver; namely it's now using devres, and the
standardized LED API so that libinput doesn't need to have root
access any more, with substantial amount of other cleanups
piggy-backing on top. All this from Benjamin Tissoires
- Report descriptor parsing would now ignore and out-of-range System
controls in case of the application actually being System Control.
This fixes quite some issues with several devices, and allows us to
remove a few ->report_fixup callbacks. From Benjamin Tissoires
- ... a lot of other assorted small fixes and device ID additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (76 commits)
HID: add missing \n to end of dev_warn messages
HID: alps: fix multitouch cursor issue
HID: hid-logitech: Documentation updates/corrections
HID: hid-logitech: Improve Wingman Formula Force GP support
HID: hid-logitech: Rewrite of descriptor for all DF wheels
HID: hid-logitech: Compute combined pedals value
HID: hid-logitech: Add combined pedal support Logitech wheels
HID: hid-logitech: Introduce control for combined pedals feature
HID: sony: Update copyright and add Dualshock 4 rate control note
HID: sony: Defer the initial USB Sixaxis output report
HID: sony: Relax duplicate checking for USB-only devices
Revert "HID: microsoft: fix invalid rdesc for 3k kbd"
HID: alps: fix error return code in alps_input_configured()
HID: alps: fix stick device not working after resume
HID: support for keyboard - Corsair STRAFE
HID: alps: Fix memory leak
HID: uclogic: Add support for UC-Logic TWHA60 v3
HID: uclogic: Override constant descriptors
HID: uclogic: Support UGTizer GP0610 partially
HID: uclogic: Add support for several more tablets
...
Pull f2fs updates from Jaegeuk Kim:
"In this round, we've investigated how f2fs deals with errors given by
our fault injection facility. With this, we could fix several corner
cases. And, in order to improve the performance, we set inline_dentry
by default and enhance the exisiting discard issue flow. In addition,
we added f2fs_migrate_page for better memory management.
Enhancements:
- set inline_dentry by default
- improve discard issue flow
- add more fault injection cases in f2fs
- allow block preallocation for encrypted files
- introduce migrate_page callback function
- avoid truncating the next direct node block at every checkpoint
Bug fixes:
- set page flag correctly between write_begin and write_end
- missing error handling cases detected by fault injection
- preallocate blocks regarding to 4KB alignement correctly
- dentry and filename handling of encryption
- lost xattrs of directories"
* tag 'for-f2fs-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (69 commits)
f2fs: introduce update_ckpt_flags to clean up
f2fs: don't submit irrelevant page
f2fs: fix to commit bio cache after flushing node pages
f2fs: introduce get_checkpoint_version for cleanup
f2fs: remove dead variable
f2fs: remove redundant io plug
f2fs: support checkpoint error injection
f2fs: fix to recover old fault injection config in ->remount_fs
f2fs: do fault injection initialization in default_options
f2fs: remove redundant value definition
f2fs: support configuring fault injection per superblock
f2fs: adjust display format of segment bit
f2fs: remove dirty inode pages in error path
f2fs: do not unnecessarily null-terminate encrypted symlink data
f2fs: handle errors during recover_orphan_inodes
f2fs: avoid gc in cp_error case
f2fs: should put_page for summary page
f2fs: assign return value in f2fs_gc
f2fs: add customized migrate_page callback
f2fs: introduce cp_lock to protect updating of ckpt_flags
...
Pull networking updates from David Miller:
1) BBR TCP congestion control, from Neal Cardwell, Yuchung Cheng and
co. at Google. https://lwn.net/Articles/701165/
2) Do TCP Small Queues for retransmits, from Eric Dumazet.
3) Support collect_md mode for all IPV4 and IPV6 tunnels, from Alexei
Starovoitov.
4) Allow cls_flower to classify packets in ip tunnels, from Amir Vadai.
5) Support DSA tagging in older mv88e6xxx switches, from Andrew Lunn.
6) Support GMAC protocol in iwlwifi mwm, from Ayala Beker.
7) Support ndo_poll_controller in mlx5, from Calvin Owens.
8) Move VRF processing to an output hook and allow l3mdev to be
loopback, from David Ahern.
9) Support SOCK_DESTROY for UDP sockets. Also from David Ahern.
10) Congestion control in RXRPC, from David Howells.
11) Support geneve RX offload in ixgbe, from Emil Tantilov.
12) When hitting pressure for new incoming TCP data SKBs, perform a
partial rathern than a full purge of the OFO queue (which could be
huge). From Eric Dumazet.
13) Convert XFRM state and policy lookups to RCU, from Florian Westphal.
14) Support RX network flow classification to igb, from Gangfeng Huang.
15) Hardware offloading of eBPF in nfp driver, from Jakub Kicinski.
16) New skbmod packet action, from Jamal Hadi Salim.
17) Remove some inefficiencies in snmp proc output, from Jia He.
18) Add FIB notifications to properly propagate route changes to
hardware which is doing forwarding offloading. From Jiri Pirko.
19) New dsa driver for qca8xxx chips, from John Crispin.
20) Implement RFC7559 ipv6 router solicitation backoff, from Maciej
Żenczykowski.
21) Add L3 mode to ipvlan, from Mahesh Bandewar.
22) Support 802.1ad in mlx4, from Moshe Shemesh.
23) Support hardware LRO in mediatek driver, from Nelson Chang.
24) Add TC offloading to mlx5, from Or Gerlitz.
25) Convert various drivers to ethtool ksettings interfaces, from
Philippe Reynes.
26) TX max rate limiting for cxgb4, from Rahul Lakkireddy.
27) NAPI support for ath10k, from Rajkumar Manoharan.
28) Support XDP in mlx5, from Rana Shahout and Saeed Mahameed.
29) UDP replicast support in TIPC, from Richard Alpe.
30) Per-queue statistics for qed driver, from Sudarsana Reddy Kalluru.
31) Support BQL in thunderx driver, from Sunil Goutham.
32) TSO support in alx driver, from Tobias Regnery.
33) Add stream parser engine and use it in kcm.
34) Support async DHCP replies in ipconfig module, from Uwe
Kleine-König.
35) DSA port fast aging for mv88e6xxx driver, from Vivien Didelot.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1715 commits)
mlxsw: switchx2: Fix misuse of hard_header_len
mlxsw: spectrum: Fix misuse of hard_header_len
net/faraday: Stop NCSI device on shutdown
net/ncsi: Introduce ncsi_stop_dev()
net/ncsi: Rework the channel monitoring
net/ncsi: Allow to extend NCSI request properties
net/ncsi: Rework request index allocation
net/ncsi: Don't probe on the reserved channel ID (0x1f)
net/ncsi: Introduce NCSI_RESERVED_CHANNEL
net/ncsi: Avoid unused-value build warning from ia64-linux-gcc
net: Add netdev all_adj_list refcnt propagation to fix panic
net: phy: Add Edge-rate driver for Microsemi PHYs.
vmxnet3: Wake queue from reset work
i40e: avoid NULL pointer dereference and recursive errors on early PCI error
qed: Add RoCE ll2 & GSI support
qed: Add support for memory registeration verbs
qed: Add support for QP verbs
qed: PD,PKEY and CQ verb support
qed: Add support for RoCE hw init
qede: Add qedr framework
...
Pull CPU hotplug updates from Thomas Gleixner:
"Yet another batch of cpu hotplug core updates and conversions:
- Provide core infrastructure for multi instance drivers so the
drivers do not have to keep custom lists.
- Convert custom lists to the new infrastructure. The block-mq custom
list conversion comes through the block tree and makes the diffstat
tip over to more lines removed than added.
- Handle unbalanced hotplug enable/disable calls more gracefully.
- Remove the obsolete CPU_STARTING/DYING notifier support.
- Convert another batch of notifier users.
The relayfs changes which conflicted with the conversion have been
shipped to me by Andrew.
The remaining lot is targeted for 4.10 so that we finally can remove
the rest of the notifiers"
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
cpufreq: Fix up conversion to hotplug state machine
blk/mq: Reserve hotplug states for block multiqueue
x86/apic/uv: Convert to hotplug state machine
s390/mm/pfault: Convert to hotplug state machine
mips/loongson/smp: Convert to hotplug state machine
mips/octeon/smp: Convert to hotplug state machine
fault-injection/cpu: Convert to hotplug state machine
padata: Convert to hotplug state machine
cpufreq: Convert to hotplug state machine
ACPI/processor: Convert to hotplug state machine
virtio scsi: Convert to hotplug state machine
oprofile/timer: Convert to hotplug state machine
block/softirq: Convert to hotplug state machine
lib/irq_poll: Convert to hotplug state machine
x86/microcode: Convert to hotplug state machine
sh/SH-X3 SMP: Convert to hotplug state machine
ia64/mca: Convert to hotplug state machine
ARM/OMAP/wakeupgen: Convert to hotplug state machine
ARM/shmobile: Convert to hotplug state machine
arm64/FP/SIMD: Convert to hotplug state machine
...
Pull RAS updates from Ingo Molnar:
"The main changes were:
- Lots of enhancements for AMD SMCA (Scalable MCA
features/extensions) systems: extract, decode and print more
hardware error information and add matching support on the
injection/testing side as well. (Yazn Ghannam)
- Various MCE handling improvements on modern Intel Xeons. (Tony
Luck)
- Plus misc fixes and enhancements"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/RAS/mce_amd_inj: Remove debugfs dir recursively on exit
x86/RAS/mce_amd_inj: Fix signed wrap around when decrementing index 'i'
x86/RAS/mce_amd_inj: Fix some W= warnings
x86/MCE/AMD, EDAC: Handle reserved bank 4 on Fam17h properly
x86/mce/AMD: Extract the error address on SMCA systems
x86/mce, EDAC/mce_amd: Print MCA_SYND and MCA_IPID during MCE on SMCA systems
x86/mce/AMD: Save MCA_IPID in MCE struct on SMCA systems
x86/mce/AMD: Ensure the deferred error interrupt is of type APIC on SMCA systems
x86/mce/AMD: Update sysfs bank names for SMCA systems
x86/mce/AMD, EDAC/mce_amd: Define and use tables for known SMCA IP types
EDAC/mce_amd: Use SMCA prefix for error descriptions arrays
EDAC/mce_amd: Add missing SMCA error descriptions
x86/mce/AMD: Read MSRs on the CPU allocating the threshold blocks
x86/RAS: Add syndrome support to mce_amd_inj
EDAC/mce_amd: Print syndrome register value on SMCA systems
x86/mce: Add support for new MCA_SYND register
x86/mce/AMD: Use msr_ops.misc() in allocate_threshold_blocks()
x86/mce: Drop X86_FEATURE_MCE_RECOVERY and the related model string test
x86/mce: Improve memcpy_mcsafe()
x86/mce: Add PCI quirks to identify Xeons with machine check recovery
...
Keep that call timeouts as ktimes rather than jiffies so that they can be
expressed as functions of RTT.
Signed-off-by: David Howells <dhowells@redhat.com>
In rxrpc_send_data_packet() make the loss-injection path return through the
same code as the transmission path so that the RTT determination is
initiated and any future timer shuffling will be done, despite the packet
having been binned.
Whilst we're at it:
(1) Add to the tx_data tracepoint an indication of whether or not we're
retransmitting a data packet.
(2) When we're deciding whether or not to request an ACK, rather than
checking if we're in fast-retransmit mode check instead if we're
retransmitting.
(3) Don't invoke the lose_skb tracepoint when losing a Tx packet as we're
not altering the sk_buff refcount nor are we just seeing it after
getting it off the Tx list.
(4) The rxrpc_skb_tx_lost note is then no longer used so remove it.
(5) rxrpc_lose_skb() no longer needs to deal with rxrpc_skb_tx_lost.
Signed-off-by: David Howells <dhowells@redhat.com>
This patch fix a spelling typo found in DocBook/tracepoint.xml.
It is because the file was created from comments in source,
so I have to fix the typo in include/trace/events/irq.h
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Implement RxRPC slow-start, which is similar to RFC 5681 for TCP. A
tracepoint is added to log the state of the congestion management algorithm
and the decisions it makes.
Notes:
(1) Since we send fixed-size DATA packets (apart from the final packet in
each phase), counters and calculations are in terms of packets rather
than bytes.
(2) The ACK packet carries the equivalent of TCP SACK.
(3) The FLIGHT_SIZE calculation in RFC 5681 doesn't seem particularly
suited to SACK of a small number of packets. It seems that, almost
inevitably, by the time three 'duplicate' ACKs have been seen, we have
narrowed the loss down to one or two missing packets, and the
FLIGHT_SIZE calculation ends up as 2.
(4) In rxrpc_resend(), if there was no data that apparently needed
retransmission, we transmit a PING ACK to ask the peer to tell us what
its Rx window state is.
Signed-off-by: David Howells <dhowells@redhat.com>
Add a tracepoint to log in rxrpc_resend() which packets will be
retransmitted. Note that if a positive ACK comes in whilst we have dropped
the lock to retransmit another packet, the actual retransmission may not
happen, though some of the effects will (such as altering the congestion
management).
Signed-off-by: David Howells <dhowells@redhat.com>
Add a tracepoint to log proposed ACKs, including whether the proposal is
used to update a pending ACK or is discarded in favour of an easlier,
higher priority ACK.
Whilst we're at it, get rid of the rxrpc_acks() function and access the
name array directly. We do, however, need to validate the ACK reason
number given to trace_rxrpc_rx_ack() to make sure we don't overrun the
array.
Signed-off-by: David Howells <dhowells@redhat.com>
Add a tracepoint to log transmission of DATA packets (including loss
injection).
Adjust the ACK transmission tracepoint to include the packet serial number
and to line this up with the DATA transmission display.
Signed-off-by: David Howells <dhowells@redhat.com>
Add a function to track the average RTT for a peer. Sources of RTT data
will be added in subsequent patches.
The RTT data will be useful in the future for determining resend timeouts
and for handling the slow-start part of the Rx protocol.
Also add a pair of tracepoints, one to log transmissions to elicit a
response for RTT purposes and one to log responses that contribute RTT
data.
Signed-off-by: David Howells <dhowells@redhat.com>
Improve sk_buff tracing within AF_RXRPC by the following means:
(1) Use an enum to note the event type rather than plain integers and use
an array of event names rather than a big multi ?: list.
(2) Distinguish Rx from Tx packets and account them separately. This
requires the call phase to be tracked so that we know what we might
find in rxtx_buffer[].
(3) Add a parameter to rxrpc_{new,see,get,free}_skb() to indicate the
event type.
(4) A pair of 'rotate' events are added to indicate packets that are about
to be rotated out of the Rx and Tx windows.
(5) A pair of 'lost' events are added, along with rxrpc_lose_skb() for
packet loss injection recording.
Signed-off-by: David Howells <dhowells@redhat.com>
Add a tracepoint to follow the insertion of a packet into the transmit
buffer, its transmission and its rotation out of the buffer.
Signed-off-by: David Howells <dhowells@redhat.com>
Add a pair of tracepoints, one to track rxrpc_connection struct ref
counting and the other to track the client connection cache state.
Signed-off-by: David Howells <dhowells@redhat.com>
Print a symbolic packet type name for each valid received packet in the
trace output, not just a number.
Signed-off-by: David Howells <dhowells@redhat.com>
