This CL adds a new class to monitor and change
dual role usb ports from userspace. The usb
phy drivers can register to the dual_role_usb
class and expose the capabilities of the ports.
The phy drivers can decide on whether a specific
attribute can be changed from userspace by
choosing to implement the appropriate callback.
Cherry-picked from
https://android-review.googlesource.com/#/c/167310/
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Bug: 21615151
Change-Id: Id1c4aaa97e898264d7006381a7badd029b5d9789
Add a pointer to the usb_function inside the
usb_function_instance structure to service
functions specific setup requests even before
the function gets added to the usb_gadget
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Change-Id: I6f457006f6c5516cc6986ec2acdf5b1ecf259d0c
Move the entire contents of linux/usb/f_accessory.h header to uapi,
it only contains a userspace interface.
Change-Id: Ieb5547da449588ae554988a201c0e6b4e3afc531
Signed-off-by: Colin Cross <ccross@android.com>
Move the most of linux/usb/f_mtp.h header to uapi. Move the only
remaining structure definition into f_mtp.c, the only place that
uses it.
Change-Id: I952c1a9dc15c36bf295a0eb4d74b6b1ad912ed03
Signed-off-by: Colin Cross <ccross@android.com>
The control request will be used by the host to enable/disable USB audio
and the ioctl will be used by userspace to read the audio mode
Change-Id: I81c38611b588451e80eacdccc417ca6e11c60cab
Signed-off-by: Mike Lockwood <lockwood@google.com>
USB accessory mode allows users to connect USB host hardware
specifically designed for Android-powered devices. The accessories
must adhere to the Android accessory protocol outlined in the
http://accessories.android.com documentation. This allows
Android devices that cannot act as a USB host to still interact with
USB hardware. When an Android device is in USB accessory mode, the
attached Android USB accessory acts as the host, provides power
to the USB bus, and enumerates connected devices.
Change-Id: I67964b50d278f3c0471d47efbb7b0973a3502681
Signed-off-by: Mike Lockwood <lockwood@android.com>
USB gadget function driver used by the Android framework to
implement the MTP and PTP protocols. It creates a character device
that provides an interface for fast transfer of files and
supports transferring files greater than 4GB.
Change-Id: I2d8f2c37029fb37d8deb791d04eb7346f94f5adb
Signed-off-by: Mike Lockwood <lockwood@android.com>
The default initial rwnd is hardcoded to 10.
Now we allow it to be controlled via
/proc/sys/net/ipv4/tcp_default_init_rwnd
which limits the values from 3 to 100
This is somewhat needed because ipv6 routes are
autoconfigured by the kernel.
See "An Argument for Increasing TCP's Initial Congestion Window"
in https://developers.google.com/speed/articles/tcp_initcwnd_paper.pdf
Change-Id: I386b2a9d62de0ebe05c1ebe1b4bd91b314af5c54
Signed-off-by: JP Abgrall <jpa@google.com>
Conflicts:
net/ipv4/sysctl_net_ipv4.c
net/ipv4/tcp_input.c
Update xt_socket_lookup_slow_v* usage in aosp patches, to
align with changes from mainline commit 686c9b5080
"netfilter: x_tables: Use par->net instead of computing
from the passed net devices".
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Add missing header <linux/miscdevice.h> and use
xt_socket_lookup_slow_v* instead of xt_socket_get*_sk
in xt_qtaguid.c.
Fix xt_socket_lookup_slow_v* functions in xt_socket.c
and declare them in xt_socket.h
Change-Id: I55819b2d4ffa82a2be20995c87d28fb5cc77b5ba
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Removing obsolete xt_socket_put_sk() and using sock_gen_put() instead.
xt_socket_put_sk() was reintroduced for xt_qtaguid in one of the patches,
but it turned out sock_gen_put() supersedes xt_socket_put_sk(). So we
don't need xt_socket_put_sk() any more.
This patch is based on commit 1a8bf6eeef (netfilter: xt_socket: use sock_gen_put())
Change-Id: I976d5f7f7eded0f3cc91b596acfeb35e4c2057e5
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
(cherry picked from commit 551780fc28cb7480dbc4f585ef80ca02c2922ec1)
Signed-off-by: John Stultz <john.stultz@linaro.org>
Fix up build kuid/kguid build issues in netfilter code.
Also re-add the xt_socket_get/put_sk interfaces needed by xt_qtaguid.
Change-Id: I7027fb840e109785bddffe8ea717b8d018b26d82
Signed-off-by: John Stultz <john.stultz@linaro.org>
Currently, IPv6 router discovery always puts routes into
RT6_TABLE_MAIN. This causes problems for connection managers
that want to support multiple simultaneous network connections
and want control over which one is used by default (e.g., wifi
and wired).
To work around this connection managers typically take the routes
they prefer and copy them to static routes with low metrics in
the main table. This puts the burden on the connection manager
to watch netlink to see if the routes have changed, delete the
routes when their lifetime expires, etc.
Instead, this patch adds a per-interface sysctl to have the
kernel put autoconf routes into different tables. This allows
each interface to have its own autoconf table, and choosing the
default interface (or using different interfaces at the same
time for different types of traffic) can be done using
appropriate ip rules.
The sysctl behaves as follows:
- = 0: default. Put routes into RT6_TABLE_MAIN as before.
- > 0: manual. Put routes into the specified table.
- < 0: automatic. Add the absolute value of the sysctl to the
device's ifindex, and use that table.
The automatic mode is most useful in conjunction with
net.ipv6.conf.default.accept_ra_rt_table. A connection manager
or distribution could set it to, say, -100 on boot, and
thereafter just use IP rules.
Change-Id: I82d16e3737d9cdfa6489e649e247894d0d60cbb1
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
[AmitP: Refactored original changes to align with
the changes introduced by upstream commit
830218c1ad ("net: ipv6: Fix processing of RAs in presence of VRF")]
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Send notifications when the label becomes active after an idle period.
Send netlink message notifications in addition to sysfs notifications.
Using a uevent with
subsystem=xt_idletimer
INTERFACE=...
STATE={active,inactive}
This is backport from common android-3.0
commit: beb914e987
with uevent support instead of a new netlink message type.
Change-Id: I31677ef00c94b5f82c8457e5bf9e5e584c23c523
Signed-off-by: Ashish Sharma <ashishsharma@google.com>
Signed-off-by: JP Abgrall <jpa@google.com>
The original xt_quota in the kernel is plain broken:
- counts quota at a per CPU level
(was written back when ubiquitous SMP was just a dream)
- provides no way to count across IPV4/IPV6.
This patch is the original unaltered code from:
http://sourceforge.net/projects/xtables-addons
at commit e84391ce665cef046967f796dd91026851d6bbf3
Change-Id: I19d49858840effee9ecf6cff03c23b45a97efdeb
Signed-off-by: JP Abgrall <jpa@google.com>
This module allows tracking stats at the socket level for given UIDs.
It replaces xt_owner.
If the --uid-owner is not specified, it will just count stats based on
who the skb belongs to. This will even happen on incoming skbs as it
looks into the skb via xt_socket magic to see who owns it.
If an skb is lost, it will be assigned to uid=0.
To control what sockets of what UIDs are tagged by what, one uses:
echo t $sock_fd $accounting_tag $the_billed_uid \
> /proc/net/xt_qtaguid/ctrl
So whenever an skb belongs to a sock_fd, it will be accounted against
$the_billed_uid
and matching stats will show up under the uid with the given
$accounting_tag.
Because the number of allocations for the stats structs is not that big:
~500 apps * 32 per app
we'll just do it atomic. This avoids walking lists many times, and
the fancy worker thread handling. Slabs will grow when needed later.
It use netdevice and inetaddr notifications instead of hooks in the core dev
code to track when a device comes and goes. This removes the need for
exposed iface_stat.h.
Put procfs dirs in /proc/net/xt_qtaguid/
ctrl
stats
iface_stat/<iface>/...
The uid stats are obtainable in ./stats.
Change-Id: I01af4fd91c8de651668d3decb76d9bdc1e343919
Signed-off-by: JP Abgrall <jpa@google.com>
Upstream commit c0371da604 "put iov_iter into msghdr",
added iov_iter and removed direct access to scatter/gather
array elements in msghdr. It broke PPPoLAC and PPPoPNS.
Lets restore the direct access to scatter/gather array in
msghdr for the time being. Otherwise we run into following
build failure:
----------
drivers/net/ppp/pppolac.c: In function ‘pppolac_xmit_core’:
drivers/net/ppp/pppolac.c:210:4: error: unknown field ‘msg_iov’ specified in initializer
.msg_iov = (struct iovec *)&iov,
^
drivers/net/ppp/pppolac.c:211:4: error: unknown field ‘msg_iovlen’ specified in initializer
.msg_iovlen = 1,
^
make[3]: *** [drivers/net/ppp/pppolac.o] Error 1
----------
Change-Id: I2a1245a156da6d93b49f5cfd10506381b0eff005
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
The argument was removed by commit 676d23690f ("net: Fix use after free by
removing length arg from sk_data_ready callbacks") and it's presence causes
warnings like:
drivers/net/ppp/pppopns.c:296:27: warning: assignment from incompatible pointer type
po->proto.pns.data_ready = sk_raw->sk_data_ready;
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Move the entire contents of the linux/if_pppolac.h and
linux/if_pppopns.h headers to uapi, they only contain userspace
interfaces.
Change-Id: I3cfed7f2ae400b53269a1f59144aa3dbc30ae0b5
Signed-off-by: Colin Cross <ccross@android.com>
This is required to pass the headers_check
Change-Id: Ic4c773973278cbdf1cb4eb66473826cb96ccbfb3
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
PPP handles packet loss but does not work with out of order packets.
This change performs reordering of incoming data packets within a
sliding window of one second. Since sequence number is optional,
receiving a packet without it will drop all queued packets.
Currently the logic is triggered by incoming packets, so queued
packets have to wait till another packet is arrived. It is done for
simplicity since no additional locks or threads are required. For
reliable protocols, a retransmission will kick it. For unreliable
protocols, queued packets just seem like packet loss. Time-critical
protocols might be broken, but they never work with queueing anyway.
Signed-off-by: Chia-chi Yeh <chiachi@android.com>
net: Fix a bitmask in PPPoPNS and rename constants in PPPoPNS and PPPoLAC.
Signed-off-by: Chia-chi Yeh <chiachi@android.com>
net: Fix a potential deadlock while releasing PPPoLAC/PPPoPNS socket.
PPP driver guarantees that no thread will be executing start_xmit() after
returning from ppp_unregister_channel(). To achieve this, a spinlock (downl)
is used. In pppolac_release(), ppp_unregister_channel() is called after sk_udp
is locked. At the same time, another thread might be running in pppolac_xmit()
with downl. Thus a deadlock will occur if the thread tries to lock sk_udp.
The same situation might happen on sk_raw in pppopns_release().
Signed-off-by: Chia-chi Yeh <chiachi@android.com>
net: Force PPPoLAC and PPPoPNS to bind an interface before creating PPP channel.
It is common to manipulate the routing table after configuring PPP device.
Since both PPPoLAC and PPPoPNS run over IP, care must be taken to make sure
that there is no loop in the routing table.
Although this can be done by adding a host route, it might still cause
problems when the interface is down for some reason.
To solve this, this patch forces both drivers to bind an interface before
creating PPP channel, so the system will not re-route the tunneling sockets
to another interface when the original one is down. Another benefit is that
now the host route is no longer required, so there is no need to remove it
when PPP channel is closed.
Signed-off-by: Chia-chi Yeh <chiachi@android.com>
net: Avoid sleep-inside-spinlock in PPPoLAC and PPPoPNS.
Since recv() and xmit() are called with a spinlock held, routines which might
sleep cannot be used. This issue is solved by following changes:
Incoming packets are now processed in backlog handler, recv_core(), instead of
recv(). Since backlog handler is always executed with socket spinlock held, the
requirement of ppp_input() is still satisfied.
Outgoing packets are now processed in workqueue handler, xmit_core(), instead of
xmit(). Note that kernel_sendmsg() is no longer used to prevent touching dead
sockets.
In release(), lock_sock() and pppox_unbind_sock() ensure that no thread is in
recv_core() or xmit(). Then socket handlers are restored before release_sock(),
so no packets will leak in backlog queue.
Signed-off-by: Chia-chi Yeh <chiachi@android.com>
net: Fix msg_iovlen in PPPoLAC and PPPoPNS.
Although any positive value should work (which is always true in both drivers),
the correct value should be 1.
Signed-off-by: Chia-chi Yeh <chiachi@android.com>
Add <linux/android_aid.h>, our mapping of AID defines to gid numbers.
Change-Id: I3a02eb2b5c7e336e3de0cb45d8e04ec82f7281b4
Signed-off-by: Robert Love <rlove@google.com>
This is required to support chips which use SDIO for signaling/
communication but do not implement the various card enumeration registers
as required for full SD / SDIO cards.
mmc: sdio: Fix bug where we're freeing the CIS tables we never allocated when using EMBEDDED_SDIO
mmc: Add max_blksize to embedded SDIO data
Change-Id: Ibff2e3e991e5522f55ec8c6edc25ed09f2553736
Signed-off-by: San Mehat <san@google.com>
keyreset now registers a keycombo driver that acts as the old
keyreset driver acted.
Change-Id: I08f5279e3a33b267571b699697f9f54508868983
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Keycombo lets you provide a key up and key down function, and an
optional time delay for key down. The driver will call the key
down function after the specified key combo has been held for the
speicified time delay. After you release the combo, if the key down
has happened, it calls key up.
Change-Id: I6a9a94e96a8f58fadd908fd1dc7944b9102a089f
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Move the entire contents of linux/keychord.h header to uapi, it only
contains a userspace interface.
Change-Id: If94f83328b19efb58c66391dce3bd8e927788d8d
Signed-off-by: Colin Cross <ccross@android.com>
This driver allows userspace to receive notification when client
specified key combinations are pressed.
The client opens /dev/keychord and writes a list of keychords
for the driver to monitor.
The client then reads or polls /dev/keychord for notifications.
A client specified ID for the keychord is returned from read()
when a keychord press is detected.
Signed-off-by: Mike Lockwood <lockwood@android.com>
keychord: fix to build without CONFIG_PREEMPT
Change-Id: I911f13aeda4224b6fa57863bc7e8972fec8837fb
Add a platform device in the board file to specify a reset key-combo.
The first time the key-combo is detected a work function that syncs
the filesystems is scheduled. If all the keys are released and then
pressed again, it calls panic. Reboot on panic should be set for
this to work.
Change-Id: I9d54283ca1fba45e4b1ae1a407524cdda8171143
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Supports keyboard matrixces, direct inputs, direct outputs and axes connected to gpios.
Change-Id: I5e921e6e3a1cc169316ee3b665f4cc21b5735114
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Nick Pelly <npelly@google.com>
Pull networking fixes from David Miller:
1) Limit the number of can filters to avoid > MAX_ORDER allocations.
Fix from Marc Kleine-Budde.
2) Limit GSO max size in netvsc driver to avoid problems with NVGRE
configurations. From Stephen Hemminger.
3) Return proper error when memory allocation fails in
ser_gigaset_init(), from Dan Carpenter.
4) Missing linkage undo in error paths of ipvlan_link_new(), from Gao
Feng.
5) Missing necessayr SET_NETDEV_DEV in lantiq and cpmac drivers, from
Florian Fainelli.
6) Handle probe deferral properly in smsc911x driver.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
net: mlx5: Fix Kconfig help text
net: smsc911x: back out silently on probe deferrals
ibmveth: set correct gso_size and gso_type
net: ethernet: cpmac: Call SET_NETDEV_DEV()
net: ethernet: lantiq_etop: Call SET_NETDEV_DEV()
vhost-vsock: fix orphan connection reset
cxgb4/cxgb4vf: Assign netdev->dev_port with port ID
driver: ipvlan: Unlink the upper dev when ipvlan_link_new failed
ser_gigaset: return -ENOMEM on error instead of success
NET: usb: cdc_mbim: add quirk for supporting Telit LE922A
can: peak: fix bad memory access and free sequence
phy: Don't increment MDIO bus refcount unless it's a different owner
netvsc: reduce maximum GSO size
drivers: net: cpsw-phy-sel: Clear RGMII_IDMODE on "rgmii" links
can: raw: raw_setsockopt: limit number of can_filter that can be set
Pull libnvdimm fixes from Dan Williams:
"Several fixes to the DSM (ACPI device specific method) marshaling
implementation.
I consider these urgent enough to send for 4.9 consideration since
they fix the kernel's handling of ARS (Address Range Scrub) commands.
Especially for platforms without machine-check-recovery capabilities,
successful execution of ARS commands enables the platform to
potentially break out of an infinite reboot problem if a media error
is present in the boot path. There is also a one line fix for a
device-dax read-only mapping regression.
Commits 9a901f5495 ("acpi, nfit: fix extended status translations
for ACPI DSMs") and 325896ffdf ("device-dax: fix private mapping
restriction, permit read-only") are true regression fixes for changes
introduced this cycle.
Commit efda1b5d87 ("acpi, nfit, libnvdimm: fix / harden ars_status
output length handling") fixes the kernel's handling of zero-length
results, this never would have worked in the past, but we only just
recently discovered a BIOS implementation that emits this arguably
spec non-compliant result.
The remaining two commits are additional fall out from thinking
through the implications of a zero / truncated length result of the
ARS Status command.
In order to mitigate the risk that these changes introduce yet more
regressions they are backstopped by a new unit test in commit
a7de92dac9 ("tools/testing/nvdimm: unit test acpi_nfit_ctl()") that
mocks up inputs to acpi_nfit_ctl()"
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
device-dax: fix private mapping restriction, permit read-only
tools/testing/nvdimm: unit test acpi_nfit_ctl()
acpi, nfit: fix bus vs dimm confusion in xlat_status
acpi, nfit: validate ars_status output buffer size
acpi, nfit, libnvdimm: fix / harden ars_status output length handling
acpi, nfit: fix extended status translations for ACPI DSMs
Telit LE922A MBIM based composition does not work properly
with altsetting toggle done in cdc_ncm_bind_common.
This patch adds CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE quirk
to avoid this procedure that, instead, is mandatory for
other modems.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Reviewed-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 8ab2ae655b.
I loved that commit because of how it explained what the problem with
newer versions of binutils were, but the actual patch itself turns out
to not work very well.
It has two problems:
- a zero CRC value isn't actually right. It happens to work for the
case where both sides of the equation fail at giving the symbol a
crc, but there are cases where the users of the exported symbol get
the right crc (due to seeing the C declarations), but the actual
exporting itself does not (due to the whole weak asm symbol issue).
So then the module load fails after all - we did have a crc for the
symbol, but we couldn't match it with the loaded module.
- it seems that the alpha assembler has special semantics for the
'.set' directive, and on alpha it doesn't actually set the value of
the specified symbol at all, it is instead used to set various
assembly modes (eg ".set noat" and ".set noreorder").
So using ".set" to set the symbol value would just cause build
failures on alpha.
I'm sure we'll find some other workaround for these issues (hopefully
that involves getting rid of modversions entirely some day, but people
are also talking about just using smarter tools). But for now we'll
just fall back on commit faaae2a581 ("Re-enable CONFIG_MODVERSIONS in
a slightly weaker form") that just let's a missing crc through.
Reported-by: Jan Stancek <jstancek@redhat.com>
Reported-by: Philip Müller <philm@manjaro.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Given ambiguities in the ACPI 6.1 definition of the "Output (Size)"
field of the ARS (Address Range Scrub) Status command, a firmware
implementation may in practice return 0, 4, or 8 to indicate that there
is no output payload to process.
The specification states "Size of Output Buffer in bytes, including this
field.". However, 'Output Buffer' is also the name of the entire
payload, and earlier in the specification it states "Max Query ARS
Status Output Buffer Size: Maximum size of buffer (including the Status
and Extended Status fields)".
Without this fix if the BIOS happens to return 0 it causes memory
corruption as evidenced by this result from the acpi_nfit_ctl() unit
test.
ars_status00000000: 00020000 00000000 ........
BUG: stack guard page was hit at ffffc90001750000 (stack is ffffc9000174c000..ffffc9000174ffff)
kernel stack overflow (page fault): 0000 [#1] SMP DEBUG_PAGEALLOC
task: ffff8803332d2ec0 task.stack: ffffc9000174c000
RIP: 0010:[<ffffffff814cfe72>] [<ffffffff814cfe72>] __memcpy+0x12/0x20
RSP: 0018:ffffc9000174f9a8 EFLAGS: 00010246
RAX: ffffc9000174fab8 RBX: 0000000000000000 RCX: 000000001fffff56
RDX: 0000000000000000 RSI: ffff8803231f5a08 RDI: ffffc90001750000
RBP: ffffc9000174fa88 R08: ffffc9000174fab0 R09: ffff8803231f54b8
R10: 0000000000000008 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000003 R15: ffff8803231f54a0
FS: 00007f3a611af640(0000) GS:ffff88033ed00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffc90001750000 CR3: 0000000325b20000 CR4: 00000000000406e0
Stack:
ffffffffa00bc60d 0000000000000008 ffffc90000000001 ffffc9000174faac
0000000000000292 ffffffffa00c24e4 ffffffffa00c2914 0000000000000000
0000000000000000 ffffffff00000003 ffff880331ae8ad0 0000000800000246
Call Trace:
[<ffffffffa00bc60d>] ? acpi_nfit_ctl+0x49d/0x750 [nfit]
[<ffffffffa01f4fe0>] nfit_test_probe+0x670/0xb1b [nfit_test]
Cc: <stable@vger.kernel.org>
Fixes: 747ffe11b4 ("libnvdimm, tools/testing/nvdimm: fix 'ars_status' output buffer sizing")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull networking fixes from David Miller:
1) When dcbnl_cee_fill() fails to be able to push a new netlink
attribute, it return 0 instead of an error code. From Pan Bian.
2) Two suffix handling fixes to FIB trie code, from Alexander Duyck.
3) bnxt_hwrm_stat_ctx_alloc() goes through all the trouble of setting
and maintaining a return code 'rc' but fails to actually return it.
Also from Pan Bian.
4) ping socket ICMP handler needs to validate ICMP header length, from
Kees Cook.
5) caif_sktinit_module() has this interesting logic:
int err = sock_register(...);
if (!err)
return err;
return 0;
Just return sock_register()'s return value directly which is the
only possible correct thing to do.
6) Two bnx2x driver fixes from Yuval Mintz, return a reasonable
estimate from get_ringparam() ethtool op when interface is down and
avoid trying to use UDP port based tunneling on 577xx chips.
7) Fix ep93xx_eth crash on module unload from Florian Fainelli.
8) Missing uapi exports, from Stephen Hemminger.
9) Don't schedule work from sk_destruct(), because the socket will be
freed upon return from that function. From Herbert Xu.
10) Buggy drivers, of which we know there is at least one, can send a
huge packet into the TCP stack but forget to set the gso_size in the
SKB, which causes all kinds of problems.
Correct this when it happens, and emit a one-time warning with the
device name included so that it can be diagnosed more easily.
From Marcelo Ricardo Leitner.
11) virtio-net does DMA off the stack causes hiccups with VMAP_STACK,
fix from Andy Lutomirski.
12) Fix fec driver compilation with CONFIG_M5272, from Nikita
Yushchenko.
13) mlx5 fixes from Kamal Heib, Saeed Mahameed, and Mohamad Haj Yahia.
(erroneously flushing queues on error, module parameter validation,
etc)
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (34 commits)
net/mlx5e: Change the SQ/RQ operational state to positive logic
net/mlx5e: Don't flush SQ on error
net/mlx5e: Don't notify HW when filling the edge of ICO SQ
net/mlx5: Fix query ISSI flow
net/mlx5: Remove duplicate pci dev name print
net/mlx5: Verify module parameters
net: fec: fix compile with CONFIG_M5272
be2net: Add DEVSEC privilege to SET_HSW_CONFIG command.
virtio-net: Fix DMA-from-the-stack in virtnet_set_mac_address()
tcp: warn on bogus MSS and try to amend it
uapi glibc compat: fix outer guard of net device flags enum
net: stmmac: clear reset value of snps, wr_osr_lmt/snps, rd_osr_lmt before writing
netlink: Do not schedule work from sk_destruct
uapi: export nf_log.h
uapi: export tc_skbmod.h
net: ep93xx_eth: Do not crash unloading module
bnx2x: Prevent tunnel config for 577xx
bnx2x: Correct ringparam estimate when DOWN
isdn: hisax: set error code on failure
net: bnx2x: fix improper return value
...
Fix a wrong condition preventing the higher net device flags
IFF_LOWER_UP etc to be defined if net/if.h is included before
linux/if.h.
The comment makes it clear the intention was to allow partial
definition with either parts.
This fixes compilation of userspace programs trying to use
IFF_LOWER_UP, IFF_DORMANT or IFF_ECHO.
Fixes: 4a91cb61bb ("uapi glibc compat: fix compile errors when glibc net/if.h included before linux/if.h")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
