Pull SCSI fix from James Bottomley:
"One fix for SAS attached SATA CD-ROMs. It turns out that the libata
handling of CD devices relies on the SCSI error handler, so disable
async aborts (which don't start the error handler) for these devices"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: libsas: Disable asynchronous aborts for SATA devices
Pull device mapper fixes from Mike Snitzer:
"All fixes marked for stable:
- Fix DM thinp btree corruption seen when inserting a new key/value
pair into a full root node.
- Fix DM thinp btree removal deadlock due to artificially low number
of allowed concurrent locks allowed.
- Fix possible DM crypt corruption if kernel keyring service is used.
Only affects ciphers using following IVs: essiv, lmk and tcw.
- Two DM crypt device initialization error checking fixes.
- Fix DM integrity to allow use of async ciphers that require DMA"
* tag 'for-4.15/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm crypt: fix error return code in crypt_ctr()
dm crypt: wipe kernel key copy after IV initialization
dm integrity: don't store cipher request on the stack
dm crypt: fix crash by adding missing check for auth key size
dm btree: fix serious bug in btree_split_beneath()
dm thin metadata: THIN_MAX_CONCURRENT_LOCKS should be 6
Pull input fixes from Dmitry Torokhov:
- a fix for use-after-free in Synaptics RMI4 driver
- correction to multitouch contact tracking on certain ALPS touchpads
(which got broken when we tried to fix the 2-finger scrolling)
- touchpad on Lenovo T640p is switched over to SMbus/RMI
- a few device node refcount fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi4 - prevent UAF reported by KASAN
Input: ALPS - fix multi-touch decoding on SS4 plus touchpads
Input: synaptics - Lenovo Thinkpad T460p devices should use RMI
Input: of_touchscreen - add MODULE_LICENSE
Input: 88pm860x-ts - fix child-node lookup
Input: twl6040-vibra - fix child-node lookup
Input: twl4030-vibra - fix sibling-node lookup
Pull i2c fixes from Wolfram Sang:
"Two bugfixes for the I2C core: Lixing Wang fixed a refcounting problem
with DT nodes. Jeremy Compostella fixed a buffer overflow possibility
when using a 'don't use' ioctl interface directly"
* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: core-smbus: prevent stack corruption on read I2C_BLOCK_DATA
i2c: core: decrease reference count of device node in i2c_unregister_device
Pull libata fixlet from Tejun Heo:
"This just adds one more entry for liteon optical drives to the device
blacklist for large IOs.
The change is very low risk"
* 'for-4.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
libata: apply MAX_SEC_1024 to all LITEON EP1 series devices
Pull ARM SoC fixes from Arnd Bergmann:
"We have various small DT fixes, and one important regression fix:
The recent device tree bugfixes that were intended to address issues
that 'dtc' started warning about in 4.15 fixed various USB PHY device
nodes, but it turns out that we had code that depended on those nodes
being incorrect and the probe failing with a particular error code.
With the workaround we can also deal with correct device nodes.
The DT fixes include:
- Allwinner A10 and A20 had the display pipeline set up incorrectly
(introduced in v4.15)
- The Altera PMU lacked an interrupt-parent (never worked)
- Pin muxing on the Openblocks A7 (never worked)
- Clocks might get set up wrong on Armada 7K/8K (4.15 regression)
We now have additional device tree patches to address all the
remaining warnings introduced in 4.15, but decided to queue them for
4.16 instead, to avoid risking another regression like the USB PHY
thing mentioned above.
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
phy: work around 'phys' references to usb-nop-xceiv devices
ARM: sunxi_defconfig: Enable CMA
arm64: dts: socfpga: add missing interrupt-parent
ARM: dts: sun[47]i: Fix display backend 1 output to TCON0 remote endpoint
ARM64: dts: marvell: armada-cp110: Fix clock resources for various node
ARM: dts: da850-lcdk: Remove leading 0x and 0s from unit address
ARM: dts: kirkwood: fix pin-muxing of MPP7 on OpenBlocks A7
Pull drm fixes from Dave Airlie:
"Nouveau, i915, vmwgfx and sun4i regression fixes.
The i915 change fixes a display corruption problem introduced in 4.15,
the nouveau changes are for regressions in 4.15, one of the vmwgfx
fixes goes back a little further, the other is a 4.15 regression fix,
the 3 sun4i changes fix blank HDMI output on those devices"
* tag 'drm-fixes-for-v4.15-rc9' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau/mmu/mcp77: fix regressions in stolen memory handling
drm/nouveau/bar/gk20a: Avoid bar teardown during init
drm/nouveau/drm/nouveau: Pass the proper arguments to nvif_object_map_handle()
drm/vmwgfx: fix memory corruption with legacy/sou connectors
drm/vmwgfx: Fix a boot time warning
drm/i915: Fix deadlock in i830_disable_pipe()
drm/i915: Redo plane sanitation during readout
drm/i915: Add .get_hw_state() method for planes
drm/sun4i: hdmi: Add missing rate halving check in sun4i_tmds_determine_rate
drm/sun4i: hdmi: Fix incorrect assignment in sun4i_tmds_determine_rate
drm/sun4i: hdmi: Check for unset best_parent in sun4i_tmds_determine_rate
Pull networking fixes from David Miller:
1) Fix BPF divides by zero, from Eric Dumazet and Alexei Starovoitov.
2) Reject stores into bpf context via st and xadd, from Daniel
Borkmann.
3) Fix a memory leak in TUN, from Cong Wang.
4) Disable RX aggregation on a specific troublesome configuration of
r8152 in a Dell TB16b dock.
5) Fix sw_ctx leak in tls, from Sabrina Dubroca.
6) Fix program replacement in cls_bpf, from Daniel Borkmann.
7) Fix uninitialized station_info structures in cfg80211, from Johannes
Berg.
8) Fix miscalculation of transport header offset field in flow
dissector, from Eric Dumazet.
9) Fix LPM tree leak on failure in mlxsw driver, from Ido Schimmel.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (29 commits)
ibmvnic: Fix IPv6 packet descriptors
ibmvnic: Fix IP offload control buffer
ipv6: don't let tb6_root node share routes with other node
ip6_gre: init dev->mtu and dev->hard_header_len correctly
mlxsw: spectrum_router: Free LPM tree upon failure
flow_dissector: properly cap thoff field
fm10k: mark PM functions as __maybe_unused
cfg80211: fix station info handling bugs
netlink: reset extack earlier in netlink_rcv_skb
can: af_can: canfd_rcv(): replace WARN_ONCE by pr_warn_once
can: af_can: can_rcv(): replace WARN_ONCE by pr_warn_once
bpf: mark dst unknown on inconsistent {s, u}bounds adjustments
bpf: fix cls_bpf on filter replace
Net: ethernet: ti: netcp: Fix inbound ping crash if MTU size is greater than 1500
tls: reset crypto_info when do_tls_setsockopt_tx fails
tls: return -EBUSY if crypto_info is already set
tls: fix sw_ctx leak
net/tls: Only attach to sockets in ESTABLISHED state
net: fs_enet: do not call phy_stop() in interrupts
r8152: disable RX aggregation on Dell TB16 dock
...
Stefan Wahren reports a problem with a warning fix that was merged
for v4.15: we had lots of device nodes with a 'phys' property pointing
to a device node that is not compliant with the binding documented in
Documentation/devicetree/bindings/phy/phy-bindings.txt
This generally works because USB HCD drivers that support both the generic
phy subsystem and the older usb-phy subsystem ignore most errors from
phy_get() and related calls and then use the usb-phy driver instead.
However, it turns out that making the usb-nop-xceiv device compatible with
the generic-phy binding changes the phy_get() return code from -EINVAL to
-EPROBE_DEFER, and the dwc2 usb controller driver for bcm2835 now returns
-EPROBE_DEFER from its probe function rather than ignoring the failure,
breaking all USB support on raspberry-pi when CONFIG_GENERIC_PHY is
enabled. The same code is used in the dwc3 driver and the usb_add_hcd()
function, so a reasonable assumption would be that many other platforms
are affected as well.
I have reviewed all the related patches and concluded that "usb-nop-xceiv"
is the only USB phy that is affected by the change, and since it is by far
the most commonly referenced phy, all the other USB phy drivers appear
to be used in ways that are are either safe in DT (they don't use the
'phys' property), or in the driver (they already ignore -EPROBE_DEFER
from generic-phy when usb-phy is available).
To work around the problem, this adds a special case to _of_phy_get()
so we ignore any PHY node that is compatible with "usb-nop-xceiv",
as we know that this can never load no matter how much we defer. In the
future, we might implement a generic-phy driver for "usb-nop-xceiv"
and then remove this workaround.
Since we generally want older kernels to also want to work with the
fixed devicetree files, it would be good to backport the patch into
stable kernels as well (3.13+ are possibly affected), even though they
don't contain any of the patches that may have caused regressions.
Fixes: 014d6da6cb ARM: dts: bcm283x: Fix DTC warnings about missing phy-cells
Fixes: c5bbf358b7 arm: dts: nspire: Add missing #phy-cells to usb-nop-xceiv
Fixes: 44e5dced2e arm: dts: marvell: Add missing #phy-cells to usb-nop-xceiv
Fixes: f568f6f554 ARM: dts: omap: Add missing #phy-cells to usb-nop-xceiv
Fixes: d745d5f277 ARM: dts: imx51-zii-rdu1: Add missing #phy-cells to usb-nop-xceiv
Fixes: 915fbe59cb ARM: dts: imx: Add missing #phy-cells to usb-nop-xceiv
Link: https://marc.info/?l=linux-usb&m=151518314314753&w=2
Link: https://patchwork.kernel.org/patch/10158145/
Cc: stable@vger.kernel.org
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Eric Anholt <eric@anholt.net>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Rob Herring <robh@kernel.org>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Display corruption regression bugfix with both a prep patch and a
follow-up fix
* tag 'drm-intel-fixes-2018-01-18' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915: Fix deadlock in i830_disable_pipe()
drm/i915: Redo plane sanitation during readout
drm/i915: Add .get_hw_state() method for planes
Packet descriptor generation for IPv6 is broken.
Properly set L3 and L4 protocol flags for IPv6 descriptors.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set some missing fields in the IP control offload buffer. This buffer is
used to enable checksum and TCP segmentation offload in the VNIC server.
The buffer length field and the checksum offloading bits were not set
properly, so fix that here.
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thought I'd try my luck getting one more in:
- Two fixes for Tegra (one is to common code, but our userspace doesn't hit it).
- One for NV5x-class MCPs
* 'linux-4.15' of git://github.com/skeggsb/linux:
drm/nouveau/mmu/mcp77: fix regressions in stolen memory handling
drm/nouveau/bar/gk20a: Avoid bar teardown during init
drm/nouveau/drm/nouveau: Pass the proper arguments to nvif_object_map_handle()
When a new LPM tree is created, we try to replace the trees in the
existing virtual routers with it. If we fail, the tree needs to be
freed.
Currently, this does not happen in the unlikely case where we fail to
bind the tree to the first virtual router, since its reference count
never transitions from 1 to 0.
Fix that by taking a reference before binding the tree.
Fixes: fc922bb0dd ("mlxsw: spectrum_router: Use one LPM tree for all virtual routers")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fixes addition of stolen memory base address to PTEs.
- Removes support for compression.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Tested-by: Pierre Moreau <pierre.morrow@free.fr>
Commit bbb163e189 ("drm/nouveau/bar: implement bar1 teardown")
introduced add a teardown helper function for BAR1. During
initialisation of the Nouveau, initially all the teardown helpers are
called once, before calling their init counterparts. For gk20a, after
the BAR1 teardown function is called, the device is hanging during the
initialisation of the FB sub-device. At this point it is unclear why
this is happening and this is still under investigation. However, this
change is preventing Tegra124 devices from booting when Nouveau is
enabled. To allow Tegra124 to boot, remove the teardown helper for
gk20a.
This is based upon a previous patch by Guillaume Tucker but limits
the workaround to only gk20a GPUs.
Fixes: bbb163e189 ("drm/nouveau/bar: implement bar1 teardown")
Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is obviously wrong in the current code. Make sure to record the
correct size of the arguments and pass the actual arguments to the
nvif_object_map_handle() function.
Suggested-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Kalle Valo says:
====================
wireless-drivers fixes for 4.15
One last set of fixes for regression submitted during the last few days.
bcma & ssb
* fix older build problems which (apparently) recently became more
frequent in certain MIPS configurations
brcmfmac
* continue driver initialisation even if CLM blob (firmware) file is
not found
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
A cleanup of the PM code left an incorrect #ifdef in place, leading
to a harmless build warning:
drivers/net/ethernet/intel/fm10k/fm10k_pci.c:2502:12: error: 'fm10k_suspend' defined but not used [-Werror=unused-function]
drivers/net/ethernet/intel/fm10k/fm10k_pci.c:2475:12: error: 'fm10k_resume' defined but not used [-Werror=unused-function]
It's easier to use __maybe_unused attributes here, since you
can't pick the wrong one.
Fixes: 8249c47c6b ("fm10k: use generic PM hooks instead of legacy PCIe power hooks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull two NVMe fixes from Jens Axboe:
"Two important fixes for the sgl support for nvme that is new in this
release"
* 'for-linus' of git://git.kernel.dk/linux-block:
nvme-pci: take sglist coalescing in dma_map_sg into account
nvme-pci: check segement valid for SGL use
Pull MMC fix from Ulf Hansson:
"sdhci-esdhc-imx: Fixup clock to make i.MX53 Loco (IMX53QSB) boot
again"
* tag 'mmc-v4.15-rc2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-esdhc-imx: Fix i.MX53 eSDHCv3 clock
Pull GPIO fix from Linus Walleij:
"This is the (hopefully) last GPIO fix for v4.15, fixing the bit
fiddling in the MMIO GPIO driver.
Again the especially endowed screwer-upper who has been open coding
bit fiddling is yours truly"
* tag 'gpio-v4.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: mmio: Also read bits that are zero
Final 4.15 drm-misc pull:
Just 3 sun4i patches to fix clock computation/checks.
* tag 'drm-misc-fixes-2018-01-17' of git://anongit.freedesktop.org/drm/drm-misc:
drm/sun4i: hdmi: Add missing rate halving check in sun4i_tmds_determine_rate
drm/sun4i: hdmi: Fix incorrect assignment in sun4i_tmds_determine_rate
drm/sun4i: hdmi: Check for unset best_parent in sun4i_tmds_determine_rate
Last minute fixes for vmwgfx.
One fix for a drm helper warning introduced in 4.15
One important fix for a longer standing memory corruption issue on older
hardware versions.
* 'vmwgfx-fixes-4.15' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: fix memory corruption with legacy/sou connectors
drm/vmwgfx: Fix a boot time warning
In the receive queue for 4096 bytes fragments, the page address
set in the SW data0 field of the descriptor is not the one we got
when doing the reassembly in receive. The page structure was retrieved
from the wrong descriptor into SW data0 which is then causing a
page fault when UDP checksum is accessing data above 1500.
Signed-off-by: Rex Chang <rchang@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marc Kleine-Budde says:
====================
pull-request: can 2018-01-16
this is a pull reqeust of a single patch for net/master:
This patch by Stephane Grosjean fixes a potential bug in the packet
fragmentation in the peak USB driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Some iommu implementations can merge physically and/or virtually
contiguous segments inside sg_map_dma. The NVMe SGL support does not take
this into account and will warn because of falling off a loop. Pass the
number of mapped segments to nvme_pci_setup_sgls so that the SGL setup
can take the number of mapped segments into account.
Reported-by: Fangjian (Turing) <f.fangjian@huawei.com>
Fixes: a7a7cbe3 ("nvme-pci: add SGL support")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Sagi Grimberg <sagi@rimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
r8153 on Dell TB15/16 dock corrupts rx packets.
This change is suggested by Realtek. They guess that the XHCI controller
doesn't have enough buffer, and their guesswork is correct, once the RX
aggregation gets disabled, the issue is gone.
ASMedia is currently working on a real sulotion for this issue.
Dell and ODM confirm the bcdDevice and iSerialNumber is unique for TB16.
Note that TB15 has different bcdDevice and iSerialNumber, which are not
unique values. If you still have TB15, please contact Dell to replace it
with TB16.
BugLink: https://bugs.launchpad.net/bugs/1729674
Cc: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tfile->tun could be detached before we close the tun fd,
via tun_detach_all(), so it should not be used to check for
tfile->tx_array.
As Jason suggested, we probably have to clean it up
unconditionally both in __tun_deatch() and tun_detach_all(),
but this requires to check if it is initialized or not.
Currently skb_array_cleanup() doesn't have such a check,
so I check it in the caller and introduce a helper function,
it is a bit ugly but we can always improve it in net-next.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: 1576d98605 ("tun: switch to use skb array for tx")
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It looks like in all cases 'struct vmw_connector_state' is used. But
only in stdu connectors, was atomic_{duplicate,destroy}_state() properly
subclassed. Leading to writes beyond the end of the allocated connector
state block and all sorts of fun memory corruption related crashes.
Fixes: d7721ca711 "drm/vmwgfx: Connector atomic state"
Cc: <stable@vger.kernel.org>
Signed-off-by: Rob Clark <rclark@redhat.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
On a I2C_SMBUS_I2C_BLOCK_DATA read request, if data->block[0] is
greater than I2C_SMBUS_BLOCK_MAX + 1, the underlying I2C driver writes
data out of the msgbuf1 array boundary.
It is possible from a user application to run into that issue by
calling the I2C_SMBUS ioctl with data.block[0] greater than
I2C_SMBUS_BLOCK_MAX + 1.
This patch makes the code compliant with
Documentation/i2c/dev-interface by raising an error when the requested
size is larger than 32 bytes.
Call Trace:
[<ffffffff8139f695>] dump_stack+0x67/0x92
[<ffffffff811802a4>] panic+0xc5/0x1eb
[<ffffffff810ecb5f>] ? vprintk_default+0x1f/0x30
[<ffffffff817456d3>] ? i2cdev_ioctl_smbus+0x303/0x320
[<ffffffff8109a68b>] __stack_chk_fail+0x1b/0x20
[<ffffffff817456d3>] i2cdev_ioctl_smbus+0x303/0x320
[<ffffffff81745aed>] i2cdev_ioctl+0x4d/0x1e0
[<ffffffff811f761a>] do_vfs_ioctl+0x2ba/0x490
[<ffffffff81336e43>] ? security_file_ioctl+0x43/0x60
[<ffffffff811f7869>] SyS_ioctl+0x79/0x90
[<ffffffff81a22e97>] entry_SYSCALL_64_fastpath+0x12/0x6a
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Reference count of device node was increased in of_i2c_register_device,
but without decreasing it in i2c_unregister_device. Then the added
device node will never be released. Fix this by adding the of_node_put.
Signed-off-by: Lixin Wang <alan.1.wang@nokia-sbell.com>
Tested-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Fix to return error code -ENOMEM from the mempool_create_kmalloc_pool()
error handling case instead of 0, as done elsewhere in this function.
Fixes: ef43aa3806 ("dm crypt: add cryptographic data integrity protection (authenticated encryption)")
Cc: stable@vger.kernel.org # 4.12+
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Loading key via kernel keyring service erases the internal
key copy immediately after we pass it in crypto layer. This is
wrong because IV is initialized later and we use wrong key
for the initialization (instead of real key there's just zeroed
block).
The bug may cause data corruption if key is loaded via kernel keyring
service first and later same crypt device is reactivated using exactly
same key in hexbyte representation, or vice versa. The bug (and fix)
affects only ciphers using following IVs: essiv, lmk and tcw.
Fixes: c538f6ec9f ("dm crypt: add ability to use keys from the kernel key retention service")
Cc: stable@vger.kernel.org # 4.10+
Signed-off-by: Ondrej Kozina <okozina@redhat.com>
Reviewed-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Some asynchronous cipher implementations may use DMA. The stack may
be mapped in the vmalloc area that doesn't support DMA. Therefore,
the cipher request and initialization vector shouldn't be on the
stack.
Fix this by allocating the request and iv with kmalloc.
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If dm-crypt uses authenticated mode with separate MAC, there are two
concatenated part of the key structure - key(s) for encryption and
authentication key.
Add a missing check for authenticated key length. If this key length is
smaller than actually provided key, dm-crypt now properly fails instead
of crashing.
Fixes: ef43aa3806 ("dm crypt: add cryptographic data integrity protection (authenticated encryption)")
Cc: stable@vger.kernel.org # 4.12+
Reported-by: Salah Coronya <salahx@yahoo.com>
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When inserting a new key/value pair into a btree we walk down the spine of
btree nodes performing the following 2 operations:
i) space for a new entry
ii) adjusting the first key entry if the new key is lower than any in the node.
If the _root_ node is full, the function btree_split_beneath() allocates 2 new
nodes, and redistibutes the root nodes entries between them. The root node is
left with 2 entries corresponding to the 2 new nodes.
btree_split_beneath() then adjusts the spine to point to one of the two new
children. This means the first key is never adjusted if the new key was lower,
ie. operation (ii) gets missed out. This can result in the new key being
'lost' for a period; until another low valued key is inserted that will uncover
it.
This is a serious bug, and quite hard to make trigger in normal use. A
reproducing test case ("thin create devices-in-reverse-order") is
available as part of the thin-provision-tools project:
https://github.com/jthornber/thin-provisioning-tools/blob/master/functional-tests/device-mapper/dm-tests.scm#L593
Fix the issue by changing btree_split_beneath() so it no longer adjusts
the spine. Instead it unlocks both the new nodes, and lets the main
loop in btree_insert_raw() relock the appropriate one and make any
neccessary adjustments.
Cc: stable@vger.kernel.org
Reported-by: Monty Pavel <monty_pavel@sina.com>
Signed-off-by: Joe Thornber <thornber@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
For btree removal, there is a corner case that a single thread
could takes 6 locks which is more than THIN_MAX_CONCURRENT_LOCKS(5)
and leads to deadlock.
A btree removal might eventually call
rebalance_children()->rebalance3() to rebalance entries of three
neighbor child nodes when shadow_spine has already acquired two
write locks. In rebalance3(), it tries to shadow and acquire the
write locks of all three child nodes. However, shadowing a child
node requires acquiring a read lock of the original child node and
a write lock of the new block. Although the read lock will be
released after block shadowing, shadowing the third child node
in rebalance3() could still take the sixth lock.
(2 write locks for shadow_spine +
2 write locks for the first two child nodes's shadow +
1 write lock for the last child node's shadow +
1 read lock for the last child node)
Cc: stable@vger.kernel.org
Signed-off-by: Dennis Yang <dennisyang@qnap.com>
Acked-by: Joe Thornber <thornber@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The 4.15 vmwgfx driver shows a warning during boot.
It is caused by a mismatch between the result of vmw_enable_vblank()
and what the drm_atomic_helper expects.
Signed-off by: Woody Suwalski <terraluna977@gmail.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Pull rdma fixes from Doug Ledford:
"We had a few more items creep up over the last week. Given we are in
-rc8, these are obviously limited to bugs that have a big downside and
for which we are certain of the fix.
The first is a straight up oops bug that all you have to do is read
the code to see it's a guaranteed 100% oops bug.
The second is a use-after-free issue. We get away lucky if the queue
we are shutting down is empty, but if it isn't, we can end up oopsing.
We really need to drain the queue before destroying it.
The final one is an issue with bad user input causing us to access our
port array out of bounds. While fixing the array out of bounds issue,
it was noticed that the original code did the same thing twice (the
call to rdma_ah_set_port_num()), so its removal is not balanced by a
readd elsewhere, it was already where it needed to be in addition to
where it didn't need to be.
Summary:
- Oops fix in hfi1 driver
- use-after-free issue in iser-target
- use of user supplied array index without proper checking"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/mlx5: Fix out-of-bound access while querying AH
IB/hfi1: Prevent a NULL dereference
iser-target: Fix possible use-after-free in connection establishment error
The code for .get_multiple() has bugs:
1. The simple .get_multiple() just reads a register, masks it
and sets the return value. This is not correct: we only want to
assign values (whether 0 or 1) to the bits that are set in the
mask. Fix this by using &= ~mask to clear all bits in the mask
and then |= val & mask to set the corresponding bits from the
read.
2. The bgpio_get_multiple_be() call has a similar problem: it
uses the |= operator to set the bits, so only the bits in the
mask are affected, but it misses to clear all returned bits
from the mask initially, so some bits will be returned
erroneously set to 1.
3. The bgpio_get_set_multiple() again fails to clear the bits
from the mask.
4. find_next_bit() wasn't handled correctly, use a totally
different approach for one function and change the other
function to follow the design pattern of assigning the first
bit to -1, then use bit + 1 in the for loop and < num_iterations
as break condition.
Fixes: 80057cb417 ("gpio-mmio: Use the new .get_multiple() callback")
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Reported-by: Clemens Gruber <clemens.gruber@pqgruber.com>
Tested-by: Clemens Gruber <clemens.gruber@pqgruber.com>
Reported-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Pull networking fixes from David Miller:
1) Two read past end of buffer fixes in AF_KEY, from Eric Biggers.
2) Memory leak in key_notify_policy(), from Steffen Klassert.
3) Fix overflow with bpf arrays, from Daniel Borkmann.
4) Fix RDMA regression with mlx5 due to mlx5 no longer using
pci_irq_get_affinity(), from Saeed Mahameed.
5) Missing RCU read locking in nl80211_send_iface() when it calls
ieee80211_bss_get_ie(), from Dominik Brodowski.
6) cfg80211 should check dev_set_name()'s return value, from Johannes
Berg.
7) Missing module license tag in 9p protocol, from Stephen Hemminger.
8) Fix crash due to too small MTU in udp ipv6 sendmsg, from Mike
Maloney.
9) Fix endless loop in netlink extack code, from David Ahern.
10) TLS socket layer sets inverted error codes, resulting in an endless
loop. From Robert Hering.
11) Revert openvswitch erspan tunnel support, it's mis-designed and we
need to kill it before it goes into a real release. From William Tu.
12) Fix lan78xx failures in full speed USB mode, from Yuiko Oshino.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (54 commits)
net, sched: fix panic when updating miniq {b,q}stats
qed: Fix potential use-after-free in qed_spq_post()
nfp: use the correct index for link speed table
lan78xx: Fix failure in USB Full Speed
sctp: do not allow the v4 socket to bind a v4mapped v6 address
sctp: return error if the asoc has been peeled off in sctp_wait_for_sndbuf
sctp: reinit stream if stream outcnt has been change by sinit in sendmsg
ibmvnic: Fix pending MAC address changes
netlink: extack: avoid parenthesized string constant warning
ipv4: Make neigh lookup keys for loopback/point-to-point devices be INADDR_ANY
net: Allow neigh contructor functions ability to modify the primary_key
sh_eth: fix dumping ARSTR
Revert "openvswitch: Add erspan tunnel support."
net/tls: Fix inverted error codes to avoid endless loop
ipv6: ip6_make_skb() needs to clear cork.base.dst
sctp: avoid compiler warning on implicit fallthru
net: ipv4: Make "ip route get" match iif lo rules again.
netlink: extack needs to be reset each time through loop
tipc: fix a memory leak in tipc_nl_node_get_link()
ipv6: fix udpv6 sendmsg crash caused by too small MTU
...
We need to check if p_ent->comp_mode is QED_SPQ_MODE_EBLOCK before
calling qed_spq_add_entry(). The test is fine is the mode is EBLOCK,
but if it isn't then qed_spq_add_entry() might kfree(p_ent).
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sts variable is holding link speed as well as state. We should
be using ls to index into ls_to_ethtool.
Fixes: 265aeb511b ("nfp: add support for .get_link_ksettings()")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix initialize the uninitialized tx_qlen to an appropriate value when USB
Full Speed is used.
Fixes: 55d7de9de6 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
