PD#SWPL-5430
Problem:
new function lane 6 and lane 8
Solution:
support max 16 channel playback
Verify:
sm1_ac200, verify pass
Change-Id: I3af42a0b68bca8804afa042ad4a506a379b9bf86
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Conflicts:
sound/soc/amlogic/auge/tdm.c
PD#SWPL-5495
Problem:
There is some improvement code on RSR
project, we need to merge them back to
trunk.
Solution:
Merge the code from rsr branch
Verify:
A113
Change-Id: I0ba11c8ff412db659ff2f10bfc00d63c49f84bb5
Signed-off-by: yujie.wu <yujie.wu@amlogic.com>
Conflicts:
sound/soc/amlogic/auge/tdm.c
PD#SWPL-3365
Problem:
not resample for audio in, so output in wrong sample rate
Solution:
1. enable resample in dts
2. fix to check whether resample is needed
Verify:
x301
Change-Id: I99238cc21a00ab53df6a1f8ab1703bc9ab48cbaa
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Conflicts:
sound/soc/amlogic/auge/ddr_mngr.c
sound/soc/amlogic/auge/resample.c
sound/soc/amlogic/auge/spdif.c
PD#SWPL-2645
Problem:
play ddp source, then play pcm source, no sound
Solution:
1. fix same source control and channel map issue
2. i2s 8ch, spdif 2ch, channels are not mapped, make spdif 8 channel mask
3. when same source used, keep mpll use same mpll
Verify:
x301
Change-Id: I2fe4bbcbcbfff0a1c1a6cebf61d1da5aba9b7a9d
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Conflicts:
arch/arm/boot/dts/amlogic/tl1_t962x2_t309.dts
arch/arm/boot/dts/amlogic/tl1_t962x2_x301.dts
arch/arm64/boot/dts/amlogic/tm2_t962e2_ab311.dts
arch/arm64/boot/dts/amlogic/tm2_t962x3_ab301.dts
sound/soc/amlogic/auge/ddr_mngr.c
sound/soc/amlogic/auge/sharebuffer.c
sound/soc/amlogic/auge/spdif_hw.c
sound/soc/amlogic/auge/spdif_hw.h
PD#SWPL-5837
Problem:
dtv is out of avsync when dolby ms12 certificate
Solution:
when the audio is played, recalculate the apts to sync
pcrsrc when pcrmaster.
Verify:
X301
Change-Id: I199383aa1c0de1b4f0ec646d9d066910b3bb2b42
Signed-off-by: Xiaoming Sui <xiaoming.sui@amlogic.com>
PD#TV-4638
Problem:
Speaker output high frequency howling
after change from pattern 615 to pattern 1 on chroma22294.
The hw resampler keeps sending noise if it has no input.
Solution:
Enable the hw resample pause thd by default.
Verify:
TL1 X301.
Change-Id: Ib6f0924025e155eaa8ba0e3681b307f7ff56b449
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#TV-4638
Problem:
Speaker output high frequency howling
after change from pattern 615 to pattern 1 on chroma22294.
The hw resampler keeps sending noise if it has no input.
Solution:
Enable the hw resample pause thd by default.
Verify:
TL1 X301.
Change-Id: I076d1b80c6482661fdc3fd5808f1cc231666d07e
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#SWPL-7039
Problem:
Kernel Panic when resample A is disabled
Solution:
When resample is disabled，don't init resample
Verify:
Verified on T962e2_ab311
Change-Id: Id9552ffc6be40f133b828dbded4ad3f15d177ab0
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
PD#TV-3452
Problem:
Toddr stuck after a long time playback.
Solution:
For debug usage.
Verify:
No need.
Change-Id: Ibf4446148f5e028040d7d6527c7695f23f964f7c
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
PD#SWPL-6118
Problem:
No resample will cause mismatch between
input and output if they are not at same
samplerate.
Solution:
Add resample for hdmirx case
Verify:
Local tested.
Change-Id: I298e401578bf49484d6b75fd736d2a74c38508e4
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Conflicts:
sound/soc/amlogic/auge/ddr_mngr.c
sound/soc/amlogic/auge/ddr_mngr.h
PD#SWPL-5518
Problem:
In DTV passthrough, the output clk drifts from input
Solution:
add clk fine tuning interface
Verify:
verify by X301
Change-Id: I969d3eb865fb1aba90f155965548454cc3040c99
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Conflicts:
sound/soc/amlogic/auge/tdm.c
PD#TV-3389
Problem:
add vad wake engine in kernel
Solution:
transfer audio data to wake engine
Verify:
x301
Change-Id: I7f44d0141141775bb40f01dbc344a295a72c9d87
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Conflicts:
MAINTAINERS
PD#SWPL-5904
Problem:
Audio DRC in SOC is out of work
Solution:
Add DRC tune interface
Verify:
Verify on X301
Change-Id: I5e8ecc6dafd7fc3805b0c3e60a6ec4c945729119
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
PD#SWPL-6147
Problem:
I2S has 8 channels but spdif only 2.
Need map every single i2s lane to spdif sharebuffer.
Solution:
Add the DTS setting MASKS as former does.
Verify:
Local tested.
Change-Id: If212fc1b9c937a42778682948773874951b8a55a
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Conflicts:
sound/soc/amlogic/auge/tdm.c
PD#SWPL-5961
Problem:
There is no mute control for tas5782
Solution:
Add mute function for tas 5782
Verify:
A113
Change-Id: I75f8b82a359778f28494636fe76c7bc4db848643
Signed-off-by: yujie.wu <yujie.wu@amlogic.com>
PD#SWPL-2952
Problem:
High voltage will cause the tdmout
data pin wrong I2S data which cause pop.
Solution:
Disable the bias of gpio.
Verify:
I2S data will be low when I2s closed.
Change-Id: If5d68e0f30df074f528dfec21cbe297795bc4ea7
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Conflicts:
arch/arm64/boot/dts/amlogic/tm2_t962e2_ab311.dts
arch/arm64/boot/dts/amlogic/tm2_t962x3_ab301.dts
sound/soc/amlogic/auge/tdm.c
PD#SWPL-5845
Problem:
audio playback too slow
Solution:
change audio volume slew time
Verify:
Locally test on X301
Change-Id: I48c920037cac852aaa01818bb02eaa8991c1df6b
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
PD#SWPL-4734
Problem:
There is no volume control for tas5782
Solution:
Add ch1/ch2 volume control for tas5782
Verify:
A113
Change-Id: I1e866a2bc024713278aea0c19cc8c91084a24b90
Signed-off-by: yujie.wu <yujie.wu@amlogic.com>
Conflicts:
sound/soc/codecs/amlogic/tas5782m.c
PD#TV-1808,TV-1809,TV-1810,TV-1811
Problem:
HW EQ on TL1 doesn't work
Solution:
Add kcontrol of EQ setting and getting
Verify:
test on X301
Change-Id: Iea1525b4a57241a99389c746c0238d96424df316
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Conflicts:
MAINTAINERS
PD#SWPL-5300
Problem:
share buffer is not alaway used for tdm and spdif,
but raw data needs to output by spdif.
this would lead to spk silence for dual output
Solution:
share buffer can be occupied by later module.
when tdm and spdif output in share buffer, then play spdif,
spdif will release from share buffer,
only frddr is only used for tdm, another new frddr is used for spdif.
Verify:
x301
Change-Id: Ib0c2e02e575f496c0b0911d347857ede0d0cfa14
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
PD#SWPL-3655
Problem:
spdif output 8 channel, channel map in wrong order.
Solution:
reset spdif before enable as soon as quickly.
modification is limited for tl1 now
Verify:
x301
Change-Id: I224032390404be85c77d7436a9be9148df09c997
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Conflicts:
sound/soc/amlogic/auge/tdm.c
PD#SWPL-5219
Problem:
audio glitch at tdm startup
Solution:
Pad 0 data to clear the remaining data
in the module.
Verify:
Local tested.
Change-Id: Iab526c6893a32030799567b57e05e7bb11b8fea0
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Conflicts:
sound/soc/amlogic/auge/tdm.c
PD#SWPL-4278
Problem:
spdif out clk is related to tdm clk for share buffer.
For play raw data 32k/44.1k, it's not correct for spdif out clk.
Solution:
separate spdif out clk and tdm clk
Verify:
x301
Change-Id: Ie6e3d7413d9577c9c80ea90e8b1f9ff4bf3eefcf
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Conflicts:
sound/soc/amlogic/auge/spdif_hw.c
PD#SWPL-3365
Problem:
system would reboot when carshed by hw resample
Solution:
actrl of toddr is modified to null pointer, so it leads to crash.
fix to pass toddr pointer to function, not fetched by resample module.
Verify:
TL1 socket board
Change-Id: I9227ef2e1ca225e72b0408bc694e6a20d623c8a9
Signed-off-by: huijie.huang <huijie.huang@amlogic.com>
PD#SWPL-3435
Problem:
P321 doesn't support DTS HD decoding
Solution:
In HDMI RX module, we add a new field to
indicate whether the input audio is HBR.
With this info, hal can enable the PAO
mode to decode the HBR audio.
Verify:
P321
Change-Id: I6fd180e6636905f5119fe1d313214d4b56d07d5e
Signed-off-by: yujie.wu <yujie.wu@amlogic.com>
Conflicts:
drivers/amlogic/media/vin/tvin/hdmirx/hdmi_rx_drv.h
drivers/amlogic/media/vin/tvin/hdmirx/hdmi_rx_hw.c
PD#SWPL-2952
Problem:
Pop noise could be heard
when switching between sources.
Solution:
1. Add stream digital mute functions.
2. continuous clock to eliminate
the clk reset issue.
Verify:
Local verified.
Change-Id: I372f4c03aaf875d75aa903c9c2dfda00619af000
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Conflicts:
sound/soc/amlogic/auge/tdm_hw.c
sound/soc/amlogic/auge/tdm_hw.h
PD#SWPL-3178
Problem:
output big pop noise after system boot up.
Solution:
Add zero and then unmute the stream.
NOTICE: user should unmute the AD82584F after boot.
Verify:
local verified.
Change-Id: I21555318f9347c5340a28f7e5cf0e3e2cde849a0
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Conflicts:
sound/soc/codecs/amlogic/ad82584f.c
PD#SWPL-2404
Problem:
VAD for wake up
Solution:
Add vad driver to fetch VAD buffer and ALSA buffer, in userspace, they
will be combined for wakeup engine
Verify:
x301
Change-Id: I3b4de5fdfe173ce18e58a187a3adeda601e226b3
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Conflicts:
MAINTAINERS
arch/arm/boot/dts/amlogic/tl1_t962x2_skt.dts
include/linux/amlogic/major.h
sound/soc/amlogic/auge/ddr_mngr.h
sound/soc/amlogic/auge/tdm.c
PD#SWPL-3456
Problem:
1) After suspend, volume is not resume
2) ARC connected, still sound out from spk
Solution:
1) save channel volume when suspend, then resume the volume
2) add mute mixer control for ad82584
Verify:
x301
Change-Id: Ic6e7502e3f9689cc2d1053295f26aaf4d5be2603
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Conflicts:
sound/soc/codecs/amlogic/ad82584f.c
PD#SWPL-6944
Problem:
TV-3381
Speaker sometimes has clicking noise when playing DTV program.
Solution:
add codec trigger mute for depop
Verify:
Local verified.
Change-Id: Ib15a6b90bd3a6cdda2255afaf86daeab68ba07e2
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
PD#TV-3067
Problem:
Image signal delay of 1.5 seconds when switching to AV source.
Solution:
1.add av audio control for audio patch.
Verify:
verified by x301
Change-Id: I3e820923a26439b3aeb9841562b81cd6d55ed4ea
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
PD#SWPL-4010
Problem:
Not detect audio type by PAO for frhdmirx
Solution:
Add hw detect for frdhmirx PAO
audio type is checked by hw for PCM too
Verify:
x301
Change-Id: Ib60d738c69f336866250a8181609503912bf0485
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
PD#SWPL-5594
Problem:
The PDM input channel is not always in the
first lane, we need a mask to detect which
lane to use
Solution:
Add lane config in PDM module
Add lane-mask-in in W411 config
Verify:
W411
Change-Id: I48ca5927402282611ba5e225d75d034eeceacad6
Signed-off-by: yujie.wu <yujie.wu@amlogic.com>
PD#SWPL-4733
Problem:
The Speaker has noise
Solution:
The binv is not correct for TDM out c,
we will use amixer to set it
Verify:
A113
Change-Id: I7c8af8e00e3c8834533347947630a6944b7e2136
Signed-off-by: yujie.wu <yujie.wu@amlogic.com>
PD#SWPL-4737
Problem:
HDMI in and Line in use the same device.
But their input I2S inskew is not same.
Solution:
We need use separate skew setting for different
source.
Verify:
A113
Change-Id: I8e306af06d9c9d614c4032f2030dbedb64a7f6df
Signed-off-by: yujie.wu <yujie.wu@amlogic.com>
PD#SWPL-3081
Problem:
1,lack suspend/resume function
2,lack reset pin control
Solution:
1,add suspend/resume function
2, add reset pin control
Verify:
962x2
Signed-off-by: Che Song <che.song@amlogic.com>
Change-Id: I1cb920fdba4ad32048518fdad93e3a5a81039dd9
