Pull tty fixes from Greg KH:
"Here are three small HVC tty driver fixes to resolve a reported
regression from 4.19-rc1.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: hvc: hvc_write() fix break condition
tty: hvc: hvc_poll() fix read loop batching
tty: hvc: hvc_poll() fix read loop hang
Pull staging/IIO driver fixes from Greg KH:
"Here are a few small staging and iio driver fixes for -rc4.
Nothing major, just a few small bugfixes for some reported issues, and
a MAINTAINERS file update for the fbtft drivers.
We also re-enable the building of the erofs filesystem as the XArray
patches that were causing it to break never got merged in the -rc1
cycle, so there's no reason it can't be turned back on for now. The
problem that was previously there is now being handled in the Xarray
tree at the moment, so it will not hit us again in the future.
All of these patches have been in linux-next with no reported issues"
* tag 'staging-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vboxvideo: Change address of scanout buffer on page-flip
staging: vboxvideo: Fix IRQs no longer working
staging: gasket: TODO: re-implement using UIO
staging/fbtft: Update TODO and mailing lists
staging: erofs: rename superblock flags (MS_xyz -> SB_xyz)
iio: imu: st_lsm6dsx: take into account ts samples in wm configuration
Revert "iio: temperature: maxim_thermocouple: add MAX31856 part"
Revert "staging: erofs: disable compiling temporarile"
MAINTAINERS: Switch a maintainer for drivers/staging/gasket
staging: wilc1000: revert "fix TODO to compile spi and sdio components in single module"
Pull char/misc driver fixes from Greg KH:
"Here are a small handful of char/misc driver fixes for 4.19-rc4.
All of them are simple, resolving reported problems in a few drivers.
Full details are in the shortlog.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-4.19-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
firmware: Fix security issue with request_firmware_into_buf()
vmbus: don't return values for uninitalized channels
fpga: dfl: fme: fix return value check in in pr_mgmt_init()
misc: hmc6352: fix potential Spectre v1
Tools: hv: Fix a bug in the key delete code
misc: ibmvsm: Fix wrong assignment of return code
android: binder: fix the race mmap and alloc_new_buf_locked
mei: bus: need to unlink client before freeing
mei: bus: fix hw module get/put balance
mei: fix use-after-free in mei_cl_write
mei: ignore not found client in the enumeration
Pull block fixes from Jens Axboe:
"Three fixes that should go into this series. This contains:
- Increase number of policies supported by blk-cgroup.
With blk-iolatency, we now have four in kernel, but we had a hard
limit of three...
- Fix regression in null_blk, where the zoned supported broke
queue_mode=0 (bio based).
- NVMe pull request, with a single fix for an issue in the rdma code"
* tag 'for-linus-20180913' of git://git.kernel.dk/linux-block:
null_blk: fix zoned support for non-rq based operation
blk-cgroup: increase number of supported policies
nvmet-rdma: fix possible bogus dereference under heavy load
Pull device mapper fixes from Mike Snitzer:
- DM verity fix for crash due to using vmalloc'd buffers with the
asynchronous crypto hadsh API.
- Fix to both DM crypt and DM integrity targets to discontinue using
CRYPTO_TFM_REQ_MAY_SLEEP because its use of GFP_KERNEL can lead to
deadlock by recursing back into a filesystem.
- Various DM raid fixes related to reshape and rebuild races.
- Fix for DM thin-provisioning to avoid data corruption that was a
side-effect of needing to abort DM thin metadata transaction due to
running out of metadata space. Fix is to reserve a small amount of
metadata space so that once it is used the DM thin-pool can finish
its active transaction before switching to read-only mode.
* tag 'for-4.19/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm thin metadata: try to avoid ever aborting transactions
dm raid: bump target version, update comments and documentation
dm raid: fix RAID leg rebuild errors
dm raid: fix rebuild of specific devices by updating superblock
dm raid: fix stripe adding reshape deadlock
dm raid: fix reshape race on small devices
dm: disable CRYPTO_TFM_REQ_MAY_SLEEP to fix a GFP_KERNEL recursion deadlock
dm verity: fix crash on bufio buffer that was allocated with vmalloc
Pull drm fixes from Dave Airlie:
"This is the general drm fixes pull for rc4.
i915:
- Two GVT fixes (one for the mm reference issue you pointed out)
- Gen 2 video playback fix
- IPS timeout error suppression on Broadwell
amdgpu:
- Small memory leak
- SR-IOV reset
- locking fix
- updated SDMA golden registers
nouveau:
- Remove some leftover debugging"
* tag 'drm-fixes-2018-09-14' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau/devinit: fix warning when PMU/PRE_OS is missing
drm/amdgpu: fix error handling in amdgpu_cs_user_fence_chunk
drm/i915/overlay: Allocate physical registers from stolen
drm/amdgpu: move PSP init prior to IH in gpu reset
drm/amdgpu: Fix SDMA hang in prt mode v2
drm/amdgpu: fix amdgpu_mn_unlock() in the CS error path
drm/i915/bdw: Increase IPS disable timeout to 100ms
drm/i915/gvt: Fix the incorrect length of child_device_config issue
drm/i915/gvt: Fix life cycle reference on KVM mm
Pull pin control fixes from Linus Walleij:
- A complicated IRQ fix for the MSM driver (see commit)
- Fix the group/function check in the Ingenic driver
- Deal with a possible NULL pointer dereference in the Madera driver
* tag 'pinctrl-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: madera: Fix possible NULL pointer with pdata config
pinctrl: ingenic: Fix group & function error checking
pinctrl: msm: Really mask level interrupts to prevent latching
Pull s390 fixes from Martin Schwidefsky:
- One fix for the zcrypt driver to correctly handle incomplete
encryption/decryption operations.
- A cleanup for the aqmask/apmask parsing to avoid variable length
arrays on the stack.
* tag 's390-4.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: remove VLA usage from the AP bus
s390/crypto: Fix return code checking in cbc_paes_crypt()
Pull IPMI bugfixes from Corey Minyard:
"A few fixes that came around or after the merge window, except for
commit cd2315d471 ("ipmi: kcs_bmc: don't change device name") which
is for a driver that very few people use, and those people need the
change"
* tag 'for-linus-4.19' of git://github.com/cminyard/linux-ipmi:
ipmi: Fix NULL pointer dereference in ssif_probe
ipmi: Fix I2C client removal in the SSIF driver
ipmi: Move BT capabilities detection to the detect call
ipmi: Rework SMI registration failure
ipmi: kcs_bmc: don't change device name
Pull drm nouveau fixes from Dave Airlie:
"I'm sending this separately as it's a bit larger than I generally like
for one driver, but it does contain a bunch of make my nvidia laptop
not die (runpm) and a bunch to make my docking station and monitor
display stuff (mst) fixes.
Lyude has spent a lot of time on these, and we are putting the fixes
into distro kernels as well asap, as it helps a bunch of standard
Lenovo laptops, so I'm fairly happy things are better than they were
before these patches, but I decided to split them out just for
clarification"
* tag 'drm-fixes-2018-09-12' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau/disp/gm200-: enforce identity-mapped SOR assignment for LVDS/eDP panels
drm/nouveau/disp: fix DP disable race
drm/nouveau/disp: move eDP panel power handling
drm/nouveau/disp: remove unused struct member
drm/nouveau/TBDdevinit: don't fail when PMU/PRE_OS is missing from VBIOS
drm/nouveau/mmu: don't attempt to dereference vmm without valid instance pointer
drm/nouveau: fix oops in client init failure path
drm/nouveau: Fix nouveau_connector_ddc_detect()
drm/nouveau/drm/nouveau: Don't forget to cancel hpd_work on suspend/unload
drm/nouveau/drm/nouveau: Prevent handling ACPI HPD events too early
drm/nouveau: Reset MST branching unit before enabling
drm/nouveau: Only write DP_MSTM_CTRL when needed
drm/nouveau: Remove useless poll_enable() call in drm_load()
drm/nouveau: Remove useless poll_disable() call in switcheroo_set_state()
drm/nouveau: Remove useless poll_enable() call in switcheroo_set_state()
drm/nouveau: Fix deadlocks in nouveau_connector_detect()
drm/nouveau/drm/nouveau: Use pm_runtime_get_noresume() in connector_detect()
drm/nouveau/drm/nouveau: Fix deadlock with fb_helper with async RPM requests
drm/nouveau: Remove duplicate poll_enable() in pmops_runtime_suspend()
drm/nouveau/drm/nouveau: Fix bogus drm_kms_helper_poll_enable() placement
Pull networking fixes from David Miller:
1) Fix up several Kconfig dependencies in netfilter, from Martin Willi
and Florian Westphal.
2) Memory leak in be2net driver, from Petr Oros.
3) Memory leak in E-Switch handling of mlx5 driver, from Raed Salem.
4) mlx5_attach_interface needs to check for errors, from Huy Nguyen.
5) tipc_release() needs to orphan the sock, from Cong Wang.
6) Need to program TxConfig register after TX/RX is enabled in r8169
driver, not beforehand, from Maciej S. Szmigiero.
7) Handle 64K PAGE_SIZE properly in ena driver, from Netanel Belgazal.
8) Fix crash regression in ip_do_fragment(), from Taehee Yoo.
9) syzbot can create conditions where kernel log is flooded with
synflood warnings due to creation of many listening sockets, fix
that. From Willem de Bruijn.
10) Fix RCU issues in rds socket layer, from Cong Wang.
11) Fix vlan matching in nfp driver, from Pieter Jansen van Vuuren.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (59 commits)
nfp: flower: reject tunnel encap with ipv6 outer headers for offloading
nfp: flower: fix vlan match by checking both vlan id and vlan pcp
tipc: check return value of __tipc_dump_start()
s390/qeth: don't dump past end of unknown HW header
s390/qeth: use vzalloc for QUERY OAT buffer
s390/qeth: switch on SG by default for IQD devices
s390/qeth: indicate error when netdev allocation fails
rds: fix two RCU related problems
r8169: Clear RTL_FLAG_TASK_*_PENDING when clearing RTL_FLAG_TASK_ENABLED
erspan: fix error handling for erspan tunnel
erspan: return PACKET_REJECT when the appropriate tunnel is not found
tcp: rate limit synflood warnings further
MIPS: lantiq: dma: add dev pointer
netfilter: xt_hashlimit: use s->file instead of s->private
netfilter: nfnetlink_queue: Solve the NFQUEUE/conntrack clash for NF_REPEAT
netfilter: cttimeout: ctnl_timeout_find_get() returns incorrect pointer to type
netfilter: conntrack: timeout interface depend on CONFIG_NF_CONNTRACK_TIMEOUT
netfilter: conntrack: reset tcp maxwin on re-register
qmi_wwan: Support dynamic config on Quectel EP06
ethernet: renesas: convert to SPDX identifiers
...
Messed up when sending pull request and sent an outdated version of
previous patch, this fixes it up to remove warnings.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The supported added for zones in null_blk seem to assume that only rq
based operation is possible. But this depends on the queue_mode setting,
if this is set to 0, then cmd->bio is what we need to be operating on.
Right now any attempt to load null_blk with queue_mode=0 will
insta-crash, since cmd->rq is NULL and null_handle_cmd() assumes it to
always be set.
Make the zoned code deal with bio's instead, or pass in the
appropriate sector/nr_sectors instead.
Fixes: ca4b2a0119 ("null_blk: add zone support")
Tested-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Previously we only checked if the vlan id field is present when trying
to match a vlan tag. The vlan id and vlan pcp field should be treated
independently.
Fixes: 5571e8c9f2 ("nfp: extend flower matching capabilities")
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For inbound data with an unsupported HW header format, only dump the
actual HW header. We have no idea how much payload follows it, and what
it contains. Worst case, we dump past the end of the Inbound Buffer and
access whatever is located next in memory.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qeth_query_oat_command() currently allocates the kernel buffer for
the SIOC_QETH_QUERY_OAT ioctl with kzalloc. So on systems with
fragmented memory, large allocations may fail (eg. the qethqoat tool by
default uses 132KB).
Solve this issue by using vzalloc, backing the allocation with
non-contiguous memory.
Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Scatter-gather transmit brings a nice performance boost. Considering the
rather large MTU sizes at play, it's also totally the Right Thing To Do.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bailing out on allocation error is nice, but we also need to tell the
ccwgroup core that creating the qeth groupdev failed.
Fixes: d3d1b205e8 ("s390/qeth: allocate netdevice early")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull SCSI fixes from James Bottomley:
"Three fixes, all in drivers (qedi and iscsi target) so no wider impact
even if the code changes are a bit extensive"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qedi: Add the CRC size within iSCSI NVM image
scsi: iscsi: target: Fix conn_ops double free
scsi: iscsi: target: Set conn->sess to NULL when iscsi_login_set_conn_values fails
The use of variable length arrays on the stack is deprecated.
git commit 3d8f60d38e
"s390/zcrypt: hex string mask improvements for apmask and aqmask."
added three new VLA arrays. Remove them again.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
When calling request_firmware_into_buf() with the FW_OPT_NOCACHE flag
it is expected that firmware is loaded into buffer from memory.
But inside alloc_lookup_fw_priv every new firmware that is loaded is
added to the firmware cache (fwc) list head. So if any driver requests
a firmware that is already loaded the code iterates over the above
mentioned list and it can end up giving a pointer to other device driver's
firmware buffer.
Also the existing copy may either be modified by drivers, remote processors
or even freed. This causes a potential security issue with batched requests
when using request_firmware_into_buf.
Fix alloc_lookup_fw_priv to not add to the fwc head list if FW_OPT_NOCACHE
is set, and also don't do the lookup in the list.
Fixes: 0e742e9275 ("firmware: provide infrastructure to make fw caching optional")
[mcgrof: broken since feature introduction on v4.8]
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Vikram Mulukutla <markivx@codeaurora.org>
Signed-off-by: Rishabh Bhatnagar <rishabhb@codeaurora.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For unsupported device types, the vmbus channel ringbuffer is never
initialized, and therefore reading the sysfs files will return garbage
or cause a kernel OOPS.
Fixes: c2e5df616e ("vmbus: add per-channel sysfs info")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: <stable@vger.kernel.org> # 4.15
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case of error, the function dfl_fme_create_region() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should
be replaced with IS_ERR().
Fixes: 29de76240e ("fpga: dfl: fme: add partial reconfiguration sub feature support")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Moritz Fischer <mdf@kernel.org>
Acked-by: Alan Tull <atull@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
val is indirectly controlled by user-space, hence leading to a
potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/misc/hmc6352.c:54 compass_store() warn: potential spectre issue
'map' [r]
Fix this by sanitizing val before using it to index map
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is RaceFuzzer report like below because we have no lock to close
below the race between binder_mmap and binder_alloc_new_buf_locked.
To close the race, let's use memory barrier so that if someone see
alloc->vma is not NULL, alloc->vma_vm_mm should be never NULL.
(I didn't add stable mark intentionallybecause standard android
userspace libraries that interact with binder (libbinder & libhwbinder)
prevent the mmap/ioctl race. - from Todd)
"
Thread interleaving:
CPU0 (binder_alloc_mmap_handler) CPU1 (binder_alloc_new_buf_locked)
===== =====
// drivers/android/binder_alloc.c
// #L718 (v4.18-rc3)
alloc->vma = vma;
// drivers/android/binder_alloc.c
// #L346 (v4.18-rc3)
if (alloc->vma == NULL) {
...
// alloc->vma is not NULL at this point
return ERR_PTR(-ESRCH);
}
...
// #L438
binder_update_page_range(alloc, 0,
(void *)PAGE_ALIGN((uintptr_t)buffer->data),
end_page_addr);
// In binder_update_page_range() #L218
// But still alloc->vma_vm_mm is NULL here
if (need_mm && mmget_not_zero(alloc->vma_vm_mm))
alloc->vma_vm_mm = vma->vm_mm;
Crash Log:
==================================================================
BUG: KASAN: null-ptr-deref in __atomic_add_unless include/asm-generic/atomic-instrumented.h:89 [inline]
BUG: KASAN: null-ptr-deref in atomic_add_unless include/linux/atomic.h:533 [inline]
BUG: KASAN: null-ptr-deref in mmget_not_zero include/linux/sched/mm.h:75 [inline]
BUG: KASAN: null-ptr-deref in binder_update_page_range+0xece/0x18e0 drivers/android/binder_alloc.c:218
Write of size 4 at addr 0000000000000058 by task syz-executor0/11184
CPU: 1 PID: 11184 Comm: syz-executor0 Not tainted 4.18.0-rc3 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x16e/0x22c lib/dump_stack.c:113
kasan_report_error mm/kasan/report.c:352 [inline]
kasan_report+0x163/0x380 mm/kasan/report.c:412
check_memory_region_inline mm/kasan/kasan.c:260 [inline]
check_memory_region+0x140/0x1a0 mm/kasan/kasan.c:267
kasan_check_write+0x14/0x20 mm/kasan/kasan.c:278
__atomic_add_unless include/asm-generic/atomic-instrumented.h:89 [inline]
atomic_add_unless include/linux/atomic.h:533 [inline]
mmget_not_zero include/linux/sched/mm.h:75 [inline]
binder_update_page_range+0xece/0x18e0 drivers/android/binder_alloc.c:218
binder_alloc_new_buf_locked drivers/android/binder_alloc.c:443 [inline]
binder_alloc_new_buf+0x467/0xc30 drivers/android/binder_alloc.c:513
binder_transaction+0x125b/0x4fb0 drivers/android/binder.c:2957
binder_thread_write+0xc08/0x2770 drivers/android/binder.c:3528
binder_ioctl_write_read.isra.39+0x24f/0x8e0 drivers/android/binder.c:4456
binder_ioctl+0xa86/0xf34 drivers/android/binder.c:4596
vfs_ioctl fs/ioctl.c:46 [inline]
do_vfs_ioctl+0x154/0xd40 fs/ioctl.c:686
ksys_ioctl+0x94/0xb0 fs/ioctl.c:701
__do_sys_ioctl fs/ioctl.c:708 [inline]
__se_sys_ioctl fs/ioctl.c:706 [inline]
__x64_sys_ioctl+0x43/0x50 fs/ioctl.c:706
do_syscall_64+0x167/0x4b0 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
"
Signed-off-by: Todd Kjos <tkjos@google.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Martijn Coenen <maco@android.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case a client fails to connect in mei_cldev_enable(), the
caller won't call the mei_cldev_disable leaving the client
in a linked stated. Upon driver unload the client structure
will be freed in mei_cl_bus_dev_release(), leaving a stale pointer
on a fail_list. This will eventually end up in crash
during power down flow in mei_cl_set_disonnected().
RIP: mei_cl_set_disconnected+0x5/0x260[mei]
Call trace:
mei_cl_all_disconnect+0x22/0x30
mei_reset+0x194/0x250
__synchronize_hardirq+0x43/0x50
_cond_resched+0x15/0x30
mei_me_intr_clear+0x20/0x100
mei_stop+0x76/0xb0
mei_me_shutdown+0x3f/0x80
pci_device_shutdown+0x34/0x60
kernel_restart+0x0e/0x30
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200455
Fixes: 'c110cdb17148 ("mei: bus: make a client pointer always available")'
Cc: <stable@vger.kernel.org> 4.10+
Tested-by: Georg Müller <georgmueller@gmx.net>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KASAN reports a use-after-free during startup, in mei_cl_write:
BUG: KASAN: use-after-free in mei_cl_write+0x601/0x870 [mei]
(drivers/misc/mei/client.c:1770)
This is caused by commit 98e70866aa ("mei: add support for variable
length mei headers."), which changed the return value from len, to
buf->size. That ends up using a stale buf pointer, because blocking
call, the cb (callback) is deleted in me_cl_complete() function.
However, fortunately, len remains unchanged throughout the function
(and I don't see anything else that would require re-reading buf->size
either), so the fix is to simply revert the change, and return len, as
before.
Fixes: 98e70866aa ("mei: add support for variable length mei headers.")
CC: Arnd Bergmann <arnd@arndb.de>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some of the ME clients are available only for BIOS operation and are
removed during hand off to an OS. However the removal is not instant.
A client may be visible on the client list when the mei driver requests
for enumeration, while the subsequent request for properties will be
answered with client not found error value. The default behavior
for an error is to perform client reset while this error is harmless and
the link reset should be prevented. This issue started to be visible due to
suspend/resume timing changes. Currently reported only on the Haswell
based system.
Fixes:
[33.564957] mei_me 0000:00:16.0: hbm: properties response: wrong status = 1 CLIENT_NOT_FOUND
[33.564978] mei_me 0000:00:16.0: mei_irq_read_handler ret = -71.
[33.565270] mei_me 0000:00:16.0: unexpected reset: dev_state = INIT_CLIENTS fw status = 1E000255 60002306 00000200 00004401 00000000 00000010
Cc: <stable@vger.kernel.org>
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After system suspend, sometimes the r8169 doesn't work when ethernet
cable gets pluggued.
This issue happens because rtl_reset_work() doesn't get called from
rtl8169_runtime_resume(), after system suspend.
In rtl_task(), RTL_FLAG_TASK_* only gets cleared if this condition is
met:
if (!netif_running(dev) ||
!test_bit(RTL_FLAG_TASK_ENABLED, tp->wk.flags))
...
If RTL_FLAG_TASK_ENABLED was cleared during system suspend while
RTL_FLAG_TASK_RESET_PENDING was set, the next rtl_schedule_task() won't
schedule task as the flag is still there.
So in addition to clearing RTL_FLAG_TASK_ENABLED, also clears other
flags.
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
dma_zalloc_coherent() now crashes if no dev pointer is given.
Add a dev pointer to the ltq_dma_channel structure and fill it in the
driver using it.
This fixes a bug introduced in kernel 4.19.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The pci_reset_bus() function calls pci_probe_reset_slot() to determine
whether to call the slot or bus reset. The check has faulty logic in that
it does not account for pci_probe_reset_slot() being able to return an
errno. Fix by only calling the slot reset when the function returns 0.
Fixes: 811c5cb37d ("PCI: Unify try slot and bus reset API")
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Cc: Sinan Kaya <okaya@codeaurora.org>
Pull HID fixes from Jiri Kosina:
- functional regression fix for sensor-hub driver from Hans de Goede
- stop doing device reset for i2c-hid devices, which unbreaks some of
them (and is in line with the specification), from Kai-Heng Feng
- error handling fix for hid-core from Gustavo A. R. Silva
- functional regression fix for some Elan panels from Benjamin
Tissoires
- a few new device ID additions and misc small fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: i2c-hid: Don't reset device upon system resume
HID: sensor-hub: Restore fixup for Lenovo ThinkPad Helix 2 sensor hub report
HID: core: fix NULL pointer dereference
HID: core: fix grouping by application
HID: multitouch: fix Elan panels with 2 input modes declaration
HID: hid-saitek: Add device ID for RAT 7 Contagion
HID: core: fix memory leak on probe
HID: input: fix leaking custom input node name
HID: add support for Apple Magic Keyboards
HID: i2c-hid: Fix flooded incomplete report after S3 on Rayd touchscreen
HID: intel-ish-hid: Enable Sunrise Point-H ish driver
Pull rdma fixes from Jason Gunthorpe:
"This fixes one major regression with NFS and mlx4 due to the max_sg
rework in this merge window, tidies a few minor error_path
regressions, and various small fixes.
The HFI1 driver is broken this cycle due to a regression caused by a
PCI change, it is looking like Bjorn will merge a fix for this. Also,
the lingering ipoib issue I mentioned earlier still remains unfixed.
Summary:
- Fix possible FD type confusion crash
- Fix a user trigger-able crash in cxgb4
- Fix bad handling of IOMMU resources causing user controlled leaking
in bnxt
- Add missing locking in ipoib to fix a rare 'stuck tx' situation
- Add missing locking in cma
- Add two missing missing uverbs cleanups on failure paths,
regressions from this merge window
- Fix a regression from this merge window that caused RDMA NFS to not
work with the mlx4 driver due to the max_sg changes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/mlx4: Ensure that maximal send/receive SGE less than supported by HW
RDMA/cma: Protect cma dev list with lock
RDMA/uverbs: Fix error cleanup path of ib_uverbs_add_one()
bnxt_re: Fix couple of memory leaks that could lead to IOMMU call traces
IB/ipoib: Avoid a race condition between start_xmit and cm_rep_handler
iw_cxgb4: only allow 1 flush on user qps
IB/core: Release object lock if destroy failed
RDMA/ucma: check fd type in ucma_migrate_id()
Commit 2408898e3b ("staging: vboxvideo: Add page-flip support") only
calls vbox_crtc_do_set_base() on page-flips, but despite that function's
name it only pins the new fb, unpins the old fb and sets
vbox_crtc->fb_offset. It does not program the hardware to scan out at the
new vbox_crtc->fb_offset value.
This was causing only every other frame (assuming page-flipping between 2
buffers) to be shown since we kept scanning out of the old (now unpinned!)
buffer.
This commit fixes this by adding code to vbox_crtc_page_flip() to tell
the hardware to scanout from the new fb_offset.
Fixes: 2408898e3b ("staging: vboxvideo: Add page-flip support")
Cc: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 1daddbc8de ("staging: vboxvideo: Update driver to use
drm_dev_register.") replaced the obsolere drm_get_pci_dev() with
normal pci probe and remove functions.
But the new vbox_pci_probe() is missing a pci_enable_device() call,
causing interrupts to not be delivered. This causes resizes of the
vm window to not get seen by the drm/kms code.
This commit adds the missing pci_enable_device() call, fixing this.
Fixes: 1daddbc8de ("staging: vboxvideo: Update driver to use ...")
Cc: Fabio Rafael da Rosa <fdr@pid42.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Nicholas Mc Guire <der.herr@hofr.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Given that we are now reasonably confident in our ability to detect and
reserve the stolen memory (physical memory reserved for graphics by the
BIOS) for ourselves on most machines, we can put it to use. In this
case, we need a page to hold the overlay registers.
On an i915g running MythTv, H Buus noticed that
commit 6a2c4232ec
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Nov 4 04:51:40 2014 -0800
drm/i915: Make the physical object coherent with GTT
introduced stuttering into his video playback. After discarding the
likely suspect of it being the physical cursor updates, we were left
with the use of the phys object for the overlay. And lo, if we
completely avoid using the phys object (allocated just once on module
load!) by switching to stolen memory, the stuttering goes away.
For lack of a better explanation, claim victory and kill two birds with
one stone.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107600
Fixes: 6a2c4232ec ("drm/i915: Make the physical object coherent with GTT")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180906190144.1272-1-chris@chris-wilson.co.uk
(cherry picked from commit c8124d3992)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If both hot-add and power fault were observed in a single interrupt, we
handled the hot-add first, then the power fault, in this path:
pciehp_ist
if (events & (PDC | DLLSC))
pciehp_handle_presence_or_link_change
case OFF_STATE:
pciehp_enable_slot
__pciehp_enable_slot
board_added
pciehp_power_on_slot
ctrl->power_fault_detected = 0
pcie_write_cmd(ctrl, PCI_EXP_SLTCTL_PWR_ON, PCI_EXP_SLTCTL_PCC)
pciehp_green_led_on(p_slot) # power LED on
pciehp_set_attention_status(p_slot, 0) # attention LED off
if ((events & PFD) && !ctrl->power_fault_detected)
ctrl->power_fault_detected = 1
pciehp_set_attention_status(1) # attention LED on
pciehp_green_led_off(slot) # power LED off
This left the attention indicator on (even though the hot-add succeeded)
and the power indicator off (even though the slot power was on).
Fix this by checking for power faults before checking for new devices.
Prior to 0e94916e60, this was successful because everything was chained
through work queues and the order was:
INT_PRESENCE_ON -> INT_POWER_FAULT -> ENABLE_REQ
The ENABLE_REQ cleared the power fault at the end, but now everything is
handled inline with the interrupt thread, such that the work ENABLE_REQ was
doing happens before power fault handling now.
Fixes: 0e94916e60 ("PCI: pciehp: Handle events synchronously")
Signed-off-by: Keith Busch <keith.busch@intel.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
p.port can is indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/pci/switch/switchtec.c:912 ioctl_port_to_pff() warn: potential spectre issue 'pcfg->dsp_pff_inst_id' [r]
Fix this by sanitizing p.port before using it to index
pcfg->dsp_pff_inst_id
Notice that given that speculation windows are large, the policy is to kill
the speculation on the first load and not worry if it can be completed with
a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Logan Gunthorpe <logang@deltatee.com>
Cc: stable@vger.kernel.org
