Sebastian Andrzej Siewior says:
====================
net: u64_stats fixups for 32bit.
while looking at the u64-stats patch
https://lore.kernel.org/all/20220817162703.728679-10-bigeasy@linutronix.de
I noticed that u64_stats_fetch_begin() is used. That suspicious thing
about it is that network processing, including stats update, is
performed in NAPI and so I would expect to see
u64_stats_fetch_begin_irq() in order to avoid updates from NAPI during
the read. This is only needed on 32bit-UP where the seqcount is not
used. This is address in 2/2. The remaining user take some kind of
precaution and may use u64_stats_fetch_begin().
I updated the previously mentioned patch to get rid of
u64_stats_fetch_begin_irq(). If this is not considered stable patch
worthy then it can be ignored and considred fixed by the other series
which removes the special 32bit cases.
The xrs700x driver reads and writes the counter from preemptible context
so the only missing piece here is at least disable preemption on the
writer side to avoid preemption while the writer is in progress. The
possible reader would spin then until the writer completes its write
critical section which is considered bad. This is addressed in 1/2 by
using u64_stats_update_begin_irqsave() and so disable interrupts during
the write critical section.
The other closet resemblance I found is mdio_bus.c::mdiobus_stats_acct()
where preemtion is disabled unconditionally. This is something I want to
avoid since it also affects 64bit.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
xrs700x_read_port_counters() updates the stats from a worker using the
u64_stats_update_begin() version. This is okay on 32-UP since on the
reader side preemption is disabled.
On 32bit-SMP the writer can be preempted by the reader at which point
the reader will spin on the seqcount until writer continues and
completes the update.
Assigning the mib_mutex mutex to the underlying seqcount would ensure
proper synchronisation. The API for that on the u64_stats_init() side
isn't available. Since it is the only user, just use disable interrupts
during the update.
Use u64_stats_update_begin_irqsave() on the writer side to ensure an
uninterrupted update.
Fixes: ee00b24f32 ("net: dsa: add Arrow SpeedChips XRS700x driver")
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Casper Andersson says:
====================
net: sparx5: add mrouter support
This series adds support for multicast router ports to SparX5. To manage
mrouter ports the driver must keep track of mdb entries. When adding an
mrouter port the driver has to iterate over all mdb entries and modify
them accordingly.
v2:
- add bailout in free_mdb
- re-arrange mdb struct to avoid holes
- change devm_kzalloc -> kzalloc
- change GFP_ATOMIC -> GFP_KERNEL
- fix spelling
====================
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All multicast should be forwarded to mrouter ports. Mrouter ports must
therefore be part of all active multicast groups, and override flooding
from being disabled.
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Keep track of all mdb entries in software for easy access.
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IP multicast must sometimes be discriminated from non-IP multicast,
e.g. when determining the forwarding behavior of a given group in the
presence of multicast router ports on an offloaded bridge. Therefore,
provide helpers to identify these groups.
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We had historically not checked that genlmsghdr.reserved
is 0 on input which prevents us from using those precious
bytes in the future.
One use case would be to extend the cmd field, which is
currently just 8 bits wide and 256 is not a lot of commands
for some core families.
To make sure that new families do the right thing by default
put the onus of opting out of validation on existing families.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com> (NetLabel)
Signed-off-by: David S. Miller <davem@davemloft.net>
Upon reception, a packet must be categorized, either it's destination is
the host, or it is another host. A packet with no destination addressing
fields may be valid in two situations:
- the packet has no source field: only ACKs are built like that, we
consider the host as the destination.
- the packet has a valid source field: it is directed to the PAN
coordinator, as for know we don't have this information we consider we
are not the PAN coordinator.
There was likely a copy/paste error made during a previous cleanup
because the if clause is now containing exactly the same condition as in
the switch case, which can never be true. In the past the destination
address was used in the switch and the source address was used in the
if, which matches what the spec says.
Cc: stable@vger.kernel.org
Fixes: ae531b9475 ("ieee802154: use ieee802154_addr instead of *_sa variants")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220826142954.254853-1-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Pull more hotfixes from Andrew Morton:
"Seventeen hotfixes. Mostly memory management things.
Ten patches are cc:stable, addressing pre-6.0 issues"
* tag 'mm-hotfixes-stable-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
.mailmap: update Luca Ceresoli's e-mail address
mm/mprotect: only reference swap pfn page if type match
squashfs: don't call kmalloc in decompressors
mm/damon/dbgfs: avoid duplicate context directory creation
mailmap: update email address for Colin King
asm-generic: sections: refactor memory_intersects
bootmem: remove the vmemmap pages from kmemleak in put_page_bootmem
ocfs2: fix freeing uninitialized resource on ocfs2_dlm_shutdown
Revert "memcg: cleanup racy sum avoidance code"
mm/zsmalloc: do not attempt to free IS_ERR handle
binder_alloc: add missing mmap_lock calls when using the VMA
mm: re-allow pinning of zero pfns (again)
vmcoreinfo: add kallsyms_num_syms symbol
mailmap: update Guilherme G. Piccoli's email addresses
writeback: avoid use-after-free after removing device
shmem: update folio if shmem_replace_page() updates the page
mm/hugetlb: avoid corrupting page->mapping in hugetlb_mcopy_atomic_pte
Pull bitmap fixes from Yury Norov:
"Fix the reported issues, and implements the suggested improvements,
for the version of the cpumask tests [1] that was merged with commit
c41e8866c2 ("lib/test: introduce cpumask KUnit test suite").
These changes include fixes for the tests, and better alignment with
the KUnit style guidelines"
* tag 'bitmap-6.0-rc3' of github.com:/norov/linux:
lib/cpumask_kunit: add tests file to MAINTAINERS
lib/cpumask_kunit: log mask contents
lib/test_cpumask: follow KUnit style guidelines
lib/test_cpumask: fix cpu_possible_mask last test
lib/test_cpumask: drop cpu_possible_mask full test
When user tries to create a DAMON context via the DAMON debugfs interface
with a name of an already existing context, the context directory creation
fails but a new context is created and added in the internal data
structure, due to absence of the directory creation success check. As a
result, memory could leak and DAMON cannot be turned on. An example test
case is as below:
# cd /sys/kernel/debug/damon/
# echo "off" > monitor_on
# echo paddr > target_ids
# echo "abc" > mk_context
# echo "abc" > mk_context
# echo $$ > abc/target_ids
# echo "on" > monitor_on <<< fails
Return value of 'debugfs_create_dir()' is expected to be ignored in
general, but this is an exceptional case as DAMON feature is depending
on the debugfs functionality and it has the potential duplicate name
issue. This commit therefore fixes the issue by checking the directory
creation failure and immediately return the error in the case.
Link: https://lkml.kernel.org/r/20220821180853.2400-1-sj@kernel.org
Fixes: 75c1c2b53c ("mm/damon/dbgfs: support multiple contexts")
Signed-off-by: Badari Pulavarty <badari.pulavarty@intel.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [ 5.15.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are two problems with the current code of memory_intersects:
First, it doesn't check whether the region (begin, end) falls inside the
region (virt, vend), that is (virt < begin && vend > end).
The second problem is if vend is equal to begin, it will return true but
this is wrong since vend (virt + size) is not the last address of the
memory region but (virt + size -1) is. The wrong determination will
trigger the misreporting when the function check_for_illegal_area calls
memory_intersects to check if the dma region intersects with stext region.
The misreporting is as below (stext is at 0x80100000):
WARNING: CPU: 0 PID: 77 at kernel/dma/debug.c:1073 check_for_illegal_area+0x130/0x168
DMA-API: chipidea-usb2 e0002000.usb: device driver maps memory from kernel text or rodata [addr=800f0000] [len=65536]
Modules linked in:
CPU: 1 PID: 77 Comm: usb-storage Not tainted 5.19.0-yocto-standard #5
Hardware name: Xilinx Zynq Platform
unwind_backtrace from show_stack+0x18/0x1c
show_stack from dump_stack_lvl+0x58/0x70
dump_stack_lvl from __warn+0xb0/0x198
__warn from warn_slowpath_fmt+0x80/0xb4
warn_slowpath_fmt from check_for_illegal_area+0x130/0x168
check_for_illegal_area from debug_dma_map_sg+0x94/0x368
debug_dma_map_sg from __dma_map_sg_attrs+0x114/0x128
__dma_map_sg_attrs from dma_map_sg_attrs+0x18/0x24
dma_map_sg_attrs from usb_hcd_map_urb_for_dma+0x250/0x3b4
usb_hcd_map_urb_for_dma from usb_hcd_submit_urb+0x194/0x214
usb_hcd_submit_urb from usb_sg_wait+0xa4/0x118
usb_sg_wait from usb_stor_bulk_transfer_sglist+0xa0/0xec
usb_stor_bulk_transfer_sglist from usb_stor_bulk_srb+0x38/0x70
usb_stor_bulk_srb from usb_stor_Bulk_transport+0x150/0x360
usb_stor_Bulk_transport from usb_stor_invoke_transport+0x38/0x440
usb_stor_invoke_transport from usb_stor_control_thread+0x1e0/0x238
usb_stor_control_thread from kthread+0xf8/0x104
kthread from ret_from_fork+0x14/0x2c
Refactor memory_intersects to fix the two problems above.
Before the 1d7db834a0 ("dma-debug: use memory_intersects()
directly"), memory_intersects is called only by printk_late_init:
printk_late_init -> init_section_intersects ->memory_intersects.
There were few places where memory_intersects was called.
When commit 1d7db834a0 ("dma-debug: use memory_intersects()
directly") was merged and CONFIG_DMA_API_DEBUG is enabled, the DMA
subsystem uses it to check for an illegal area and the calltrace above
is triggered.
[akpm@linux-foundation.org: fix nearby comment typo]
Link: https://lkml.kernel.org/r/20220819081145.948016-1-quanyang.wang@windriver.com
Fixes: 9795593625 ("asm/sections: add helpers to check for section data")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thierry Reding <treding@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The vmemmap pages is marked by kmemleak when allocated from memblock.
Remove it from kmemleak when freeing the page. Otherwise, when we reuse
the page, kmemleak may report such an error and then stop working.
kmemleak: Cannot insert 0xffff98fb6eab3d40 into the object search tree (overlaps existing)
kmemleak: Kernel memory leak detector disabled
kmemleak: Object 0xffff98fb6be00000 (size 335544320):
kmemleak: comm "swapper", pid 0, jiffies 4294892296
kmemleak: min_count = 0
kmemleak: count = 0
kmemleak: flags = 0x1
kmemleak: checksum = 0
kmemleak: backtrace:
Link: https://lkml.kernel.org/r/20220819094005.2928241-1-liushixin2@huawei.com
Fixes: f41f2ed43c (mm: hugetlb: free the vmemmap pages associated with each HugeTLB page)
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This reverts commit 96e51ccf1a.
Recently we started running the kernel with rstat infrastructure on
production traffic and begin to see negative memcg stats values.
Particularly the 'sock' stat is the one which we observed having negative
value.
$ grep "sock " /mnt/memory/job/memory.stat
sock 253952
total_sock 18446744073708724224
Re-run after couple of seconds
$ grep "sock " /mnt/memory/job/memory.stat
sock 253952
total_sock 53248
For now we are only seeing this issue on large machines (256 CPUs) and
only with 'sock' stat. I think the networking stack increase the stat on
one cpu and decrease it on another cpu much more often. So, this negative
sock is due to rstat flusher flushing the stats on the CPU that has seen
the decrement of sock but missed the CPU that has increments. A typical
race condition.
For easy stable backport, revert is the most simple solution. For long
term solution, I am thinking of two directions. First is just reduce the
race window by optimizing the rstat flusher. Second is if the reader sees
a negative stat value, force flush and restart the stat collection.
Basically retry but limited.
Link: https://lkml.kernel.org/r/20220817172139.3141101-1-shakeelb@google.com
Fixes: 96e51ccf1a ("memcg: cleanup racy sum avoidance code")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Cc: "Michal Koutný" <mkoutny@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: <stable@vger.kernel.org> [5.15]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When a disk is removed, bdi_unregister gets called to stop further
writeback and wait for associated delayed work to complete. However,
wb_inode_writeback_end() may schedule bandwidth estimation dwork after
this has completed, which can result in the timer attempting to access the
just freed bdi_writeback.
Fix this by checking if the bdi_writeback is alive, similar to when
scheduling writeback work.
Since this requires wb->work_lock, and wb_inode_writeback_end() may get
called from interrupt, switch wb->work_lock to an irqsafe lock.
Link: https://lkml.kernel.org/r/20220801155034.3772543-1-khazhy@google.com
Fixes: 45a2966fd6 ("writeback: fix bandwidth estimate for spiky workload")
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Michael Stapelberg <stapelberg+linux@google.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull btrfs fixes from David Sterba:
"Fixes:
- check that subvolume is writable when changing xattrs from security
namespace
- fix memory leak in device lookup helper
- update generation of hole file extent item when merging holes
- fix space cache corruption and potential double allocations; this
is a rare bug but can be serious once it happens, stable backports
and analysis tool will be provided
- fix error handling when deleting root references
- fix crash due to assert when attempting to cancel suspended device
replace, add message what to do if mount fails due to missing
replace item
Regressions:
- don't merge pages into bio if their page offset is not contiguous
- don't allow large NOWAIT direct reads, this could lead to short
reads eg. in io_uring"
* tag 'for-6.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: add info when mount fails due to stale replace target
btrfs: replace: drop assert for suspended replace
btrfs: fix silent failure when deleting root reference
btrfs: fix space cache corruption and potential double allocations
btrfs: don't allow large NOWAIT direct reads
btrfs: don't merge pages into bio if their page offset is not contiguous
btrfs: update generation of hole file extent item when merging holes
btrfs: fix possible memory leak in btrfs_get_dev_args_from_path()
btrfs: check if root is readonly while setting security xattr
Pull cfis fixes from Steve French:
- two locking fixes (zero range, punch hole)
- DFS 9 fix (padding), affecting some servers
- three minor cleanup changes
* tag '6.0-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Add helper function to check smb1+ server
cifs: Use help macro to get the mid header size
cifs: Use help macro to get the header preamble size
cifs: skip extra NULL byte in filenames
smb3: missing inode locks in punch hole
smb3: missing inode locks in zero range
Pull misc x86 fixes from Ingo Molnar:
- Fix PAT on Xen, which caused i915 driver failures
- Fix compat INT 80 entry crash on Xen PV guests
- Fix 'MMIO Stale Data' mitigation status reporting on older Intel CPUs
- Fix RSB stuffing regressions
- Fix ORC unwinding on ftrace trampolines
- Add Intel Raptor Lake CPU model number
- Fix (work around) a SEV-SNP bootloader bug providing bogus values in
boot_params->cc_blob_address, by ignoring the value on !SEV-SNP
bootups.
- Fix SEV-SNP early boot failure
- Fix the objtool list of noreturn functions and annotate snp_abort(),
which bug confused objtool on gcc-12.
- Fix the documentation for retbleed
* tag 'x86-urgent-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Documentation/ABI: Mention retbleed vulnerability info file for sysfs
x86/sev: Mark snp_abort() noreturn
x86/sev: Don't use cc_platform_has() for early SEV-SNP calls
x86/boot: Don't propagate uninitialized boot_params->cc_blob_address
x86/cpu: Add new Raptor Lake CPU model number
x86/unwind/orc: Unwind ftrace trampolines with correct ORC entry
x86/nospec: Fix i386 RSB stuffing
x86/nospec: Unwreck the RSB stuffing
x86/bugs: Add "unknown" reporting for MMIO Stale Data
x86/entry: Fix entry_INT80_compat for Xen PV guests
x86/PAT: Have pat_enabled() properly reflect state when running on Xen
Pull x86 perf fixes from Ingo Molnar:
"Misc fixes: an Arch-LBR fix, a PEBS enumeration fix, an Intel DS fix,
PEBS constraints fix on Alder Lake CPUs and an Intel uncore PMU fix"
* tag 'perf-urgent-2022-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Fix broken read_counter() for SNB IMC PMU
perf/x86/intel: Fix pebs event constraints for ADL
perf/x86/intel/ds: Fix precise store latency handling
perf/x86/core: Set pebs_capable and PMU_FL_PEBS_ALL for the Baseline
perf/x86/lbr: Enable the branch type for the Arch LBR by default
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fixup setup of weak groups when using 'perf stat --repeat', add a
'perf test' for it.
- Fix memory leaks in 'perf sched record' detected with
-fsanitize=address.
- Fix build when PYTHON_CONFIG is user supplied.
- Capitalize topdown metrics' names in 'perf stat', so that the output,
sometimes parsed, matches the Intel SDM docs.
- Make sure the documentation for the save_type filter about Intel
systems with Arch LBR support (12th-Gen+ client or 4th-Gen Xeon+
server) reflects recent related kernel changes.
- Fix 'perf record' man page formatting of description of support to
hybrid systems.
- Update arm64´s KVM header from the kernel sources.
* tag 'perf-tools-fixes-for-v6.0-2022-08-27' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf stat: Capitalize topdown metrics' names
perf docs: Update the documentation for the save_type filter
perf sched: Fix memory leaks in __cmd_record detected with -fsanitize=address
perf record: Fix manpage formatting of description of support to hybrid systems
perf test: Stat test for repeat with a weak group
perf stat: Clear evsel->reset_group for each stat run
tools kvm headers arm64: Update KVM header from the kernel sources
perf python: Fix build when PYTHON_CONFIG is user supplied
Pull thermal control fixes from Rafael Wysocki:
"Fix two issues introduced recently and one driver problem leading to a
NULL pointer dereference in some cases.
Specifics:
- Add missing EXPORT_SYMBOL_GPL in the thermal core and add back the
required 'trips' property to the thermal zone DT bindings (Daniel
Lezcano)
- Prevent the int340x_thermal driver from crashing when a package
with a buffer of 0 length is returned by an ACPI control method
evaluated by it (Lee, Chun-Yi)"
* tag 'thermal-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/int340x_thermal: handle data_vault when the value is ZERO_SIZE_PTR
dt-bindings: thermal: Fix missing required property
thermal/core: Add missing EXPORT_SYMBOL_GPL
Pull power management fix from Rafael Wysocki:
"Make __resolve_freq() check the presence of the frequency table
instead of checking whether or not the ->target_index() callback is
implemented by the driver, because that need not be the case when
__resolve_freq() is used (Lukasz Luba)"
* tag 'pm-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: check only freq_table in __resolve_freq()
Pull ACPI fixes from Rafael Wysocki:
"These fix issues introduced by recent changes related to the handling
of ACPI device properties and a coding mistake in the exit path of the
ACPI processor driver.
Specifics:
- Prevent acpi_thermal_cpufreq_exit() from attempting to remove
the same frequency QoS request multiple times (Riwen Lu)
- Fix type detection for integer ACPI device properties (Stefan
Binding)
- Avoid emitting false-positive warnings when processing ACPI
device properties and drop the useless default case from the
acpi_copy_property_array_uint() macro (Sakari Ailus)"
* tag 'acpi-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: property: Remove default association from integer maximum values
ACPI: property: Ignore already existing data node tags
ACPI: property: Fix type detection of unified integer reading functions
ACPI: processor: Remove freq Qos request for all CPUs
Pull s390 fixes from Vasily Gorbik:
- Fix double free of guarded storage and runtime instrumentation
control blocks on fork() failure
- Fix triggering write fault when VMA does not allow VM_WRITE
* tag 's390-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: do not trigger write fault when vma does not allow VM_WRITE
s390: fix double free of GS and RI CBs on fork() failure
Pull xen fixes from Juergen Gross:
- two minor cleanups
- a fix of the xen/privcmd driver avoiding a possible NULL dereference
in an error case
* tag 'for-linus-6.0-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/privcmd: fix error exit of privcmd_ioctl_dm_op()
xen: move from strlcpy with unused retval to strscpy
xen: x86: remove setting the obsolete config XEN_MAX_DOMAIN_MEMORY
Pull audit fix from Paul Moore:
"Another small audit patch, this time to fix a bug where the return
codes were not properly set before the audit filters were run,
potentially resulting in missed audit records"
* tag 'audit-pr-20220826' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: move audit_return_fixup before the filters
Pull fbdev fixes and updates from Helge Deller:
"Mostly just small patches, with the exception of the bigger indenting
cleanups in the sisfb and radeonfb drivers.
Two patches should be mentioned though: A fix-up for fbdev if the
screen resize fails (by Shigeru Yoshida), and a potential divide by
zero fix in fb_pm2fb (by Letu Ren).
Summary:
Major fixes:
- Revert the changes for fbcon console when vc_resize() fails
[Shigeru Yoshida]
- Avoid a potential divide by zero error in fb_pm2fb [Letu Ren]
Minor fixes:
- Add missing pci_disable_device() in chipsfb_pci_init() [Yang
Yingliang]
- Fix tests for platform_get_irq() failure in omapfb [Yu Zhe]
- Destroy mutex on freeing struct fb_info in fbsysfs [Shigeru
Yoshida]
Cleanups:
- Move fbdev drivers from strlcpy to strscpy [Wolfram Sang]
- Indenting fixes, comment fixes, ... [Jiapeng Chong & Jilin Yuan]"
* tag 'fbdev-for-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: fbcon: Properly revert changes when vc_resize() failed
fbdev: Move fbdev drivers from strlcpy to strscpy
fbdev: omap: Remove unnecessary print function dev_err()
fbdev: chipsfb: Add missing pci_disable_device() in chipsfb_pci_init()
fbdev: fbcon: Destroy mutex on freeing struct fb_info
fbdev: radeon: Clean up some inconsistent indenting
fbdev: sisfb: Clean up some inconsistent indenting
fbdev: fb_pm2fb: Avoid potential divide by zero error
fbdev: ssd1307fb: Fix repeated words in comments
fbdev: omapfb: Fix tests for platform_get_irq() failure
Some architectures define their own arch_test_bit and they also need
arch_test_bit_acquire, otherwise they won't compile. We also clean up
the code by using the generic test_bit if that is equivalent to the
arch-specific version.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 8238b45798 ("wait_on_bit: add an acquire memory barrier")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The Lenovo OneLink+ Dock contains an RTL8153 controller that behaves as
a broken CDC device by default. Add the custom Lenovo PID to the r8152
driver to support it properly.
Also, systems compatible with this dock provide a BIOS option to enable
MAC address passthrough (as per Lenovo document "ThinkPad Docking
Solutions 2017"). Add the custom PID to the MAC passthrough list too.
Tested on a ThinkPad 13 1st gen with the expected results:
passthrough disabled: Invalid header when reading pass-thru MAC addr
passthrough enabled: Using pass-thru MAC addr XX:XX:XX:XX:XX:XX
Signed-off-by: Jean-Francois Le Fillatre <jflf_kernel@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
